Elegant midi-tower for motherboards up to ATX form factor Mesh design on air intakes for optimal airflow High cooling capacity with space for up to twelve fans and a 360 mm radiator Four dust filters keep annoying dust in check Sufficient space for 175 mm tall CPU coolers and 420 mm long graphics cards The Montech XR Wood: Elegant midi-tower with enormous airflow With simple wood accents, a mesh design, and a side panel made of tempered glass, the Montech case makes a minimalistic and elegant impression at first glance. Behind the façade are four dust filters for large air inlets and four pre-installed 120 mm ARGB fans that provide strong airflow. The Montech XR series Structurally, the XR Wood from Montech borrows much from the XR. With a new front section made of mesh with wood accents and the I/O position shifted upwards, the XR Wood is a successful expansion of Montech's XR lineup. Compact size without compromise Whether it's cooling, airflow, or hardware space, the compact design of the Montech XR Wood makes no compromises. There's enough room for a CPU cooler up to 175 mm in height and mounting options for up to twelve 120 mm fans, guaranteeing optimal cooling for your high-performance hardware and strong airflow through the case. There is also enough space for graphics cards up to 420 mm long. Even the most powerful graphics cards keep their chips cool thanks to the strong airflow in the case. Large radiators for optimal cooling If AiOs or even custom loops are more your style, the case provides space for a 360 mm radiator at the top and a 120 mm radiator at the rear. Dust filters inside the case prevent bothersome dust buildup in your radiators without significantly affecting airflow. Well-equipped I/O panel To keep up with the connectivity needs of modern CPUs and chipsets, Montech didn't cut corners on the I/O panel either. A USB Type-C port with 10 Gbit/s data throughput and two USB Type-A ports with 5 Gbit/s speed each allow convenient connection of devices or storage media to the front I/O of the case. In addition, two common 3.5 mm audio jacks are also available.
Small case for simple systems Two low-profile expansion slots for graphics cards Supports ITX-sized motherboards and CPU cooler height up to 38 mm Power supply: 1U Flex up to 150 mm One USB-C port on the I/O panel The Jonsbo NV10 in detail The Jonsbo NV10 is a small case that can be placed on a desk thanks to its lightweight design, and its simple black aesthetic fits into any setup. You can connect an external device to the USB-C port on the I/O panel. Hardware options The mini-tower supports installing ITX-sized motherboards. The CPU cooler should not exceed a height of 38 mm. The two low-profile expansion slots allow the installation of a low-profile graphics card up to 190 mm in length. When it comes to the power supply, only a 1U Flex power supply is supported, which should not be larger than 150 mm.
With the D32 series, Jonsbo targets anyone looking to build a space-saving setup. The D32 PRO PC case, unlike the D32 STD, is aimed at the high-end segment with special and practical features such as Back-Connect or an improved front I/O.Elegant and space-saving design for mATX motherboardsSeamless cable management with cutouts for back-connect motherboardsMesh side panel creates a discreet appearanceAmple space for cooling solutions allows installation of powerful hardwareThree dust filters protect your hardware from annoying dust particlesThe Jonsbo D32 PRO Mesh: Space-saving and discreet case for high-end hardwareWhether mid-range HTPC or high-end PC – builds of all types can comfortably fit in the D32 PRO Mesh from Jonsbo. In this minimal case, graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height can be accommodated. In back-connect mode, the maximum height of the CPU cooler is reduced by just under seven millimeters.Thus, adequate cooling for your hardware is ensured even with the compact design of the case. Combined with up to six 120-mm fans, or one 120-mm fan and four 140-mm fans, the fans also provide tremendous airflow inside the case.No cable clutter with Back-ConnectWith back-connect motherboards such as the BTF series from ASUS, the PROJECT ZERO series from MSI, or the Stealth series from GIGABYTE, the case in B-mode, with about six to seven millimeters more space required, is virtually free of visible cable clutter.Since most power and connection cables can be attached to the back of the motherboard, you save on cable management and still maintain a clean look inside your case.Powerful cooling in a small spaceTo ensure your high-performance hardware stays properly cooled in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120-mm fans for sufficient airflow, a large dual-tower CPU cooler, or even a 240-mm AiO that can be installed, your hardware remains cool even under load.Three dust filters on the front, top, and bottom ensure your hardware stays free from dust and dirt. This way, your temperatures remain at an optimal level and the service life of your hardware is extended.
Micro-ATX case, innovative front-mounted power supply, supports GPUs up to 430mm, space for up to seven 120mm fans, separate radiator chamber, glass panels on the front and side, includes three 120mm reverse fansThe Phanteks XT V3 combines compact design with ample room for modern hardware. With stylish glass panels and powerful cooling, your gaming setup becomes a true showcase. Compact Micro-ATX case: ideal for modern builds Ample space: supports GPUs up to 430mm in length Optimized for cooling: up to seven 120mm fans or a 360mm radiator Compatible: with back-connect motherboards Showcase design: tempered glass panels on the front and side The Phanteks XT V3: Compact Mini Case with Plenty of Space Phanteks XT V3 Case Thanks to its compact form factor, the Phanteks XT V3 can be easily integrated into a wide range of gaming or professional setups—while still providing excellent support for modern hardware. The spacious interior offers room for Mini-ITX and Micro-ATX motherboards and supports back-connect motherboards. Additionally, high-performance graphics cards fit with ease, as the Phanteks XT V3 features four PCIe slots and accommodates GPUs up to 430mm. The rear chamber of the case also impresses with an innovative design for premium hardware. Instead of the usual position, the power supply has been relocated to the top front. This allows the Phanteks XT V3 to support full-sized ATX power supplies, providing even greater compatibility. Powerful Cooling Phanteks XT V3 The Phanteks XT V3 delivers outstanding cooling performance. There are seven mounting points for 120mm fans – three at the top, three at the bottom, and one at the rear – allowing for efficient airflow configurations. Out of the box, three powerful M25-120 reverse DRGB fans are pre-installed at the bottom, ensuring strong cooling. Additionally, the Phanteks XT V3 features a dedicated top chamber for a 360mm radiator. This makes it easy to install a powerful AIO cooler, keeping even high-end CPUs reliably cool during intense gaming sessions. Showcase Case Phanteks XT V3 With the Phanteks XT V3, you can display both your hardware and your building skills. The rear chamber provides plenty of space for cable management along with smart routing options for a clutter-free system. Completing the look are tempered glass panels on the front and side, giving you an unobstructed view of your components from every angle. Comprehensive I/O Panel Phanteks XT V3 The Phanteks XT V3 provides outstanding support for your gaming setup, thanks to the front I/O panel located at the bottom right. Here, you’ll find both a USB Type-A and Type-C port with USB 3.2 Gen 2x2 standard. Additionally, a 3.5mm combo audio jack is available for connecting your gaming headset.
Midi tower with optimized airflow, mesh front, compatible with up to E-ATX, 195 mm CPU cooler height clearance, radiator support up to 360 mm, SimpliCable cable management & magnetic panels The HAVN BF 360 is perfect for gamers and hardware enthusiasts who don’t want to compromise: solid cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUSpace for up to seven fans or two 360mm radiatorsCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm space – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360HAVN BF 360: Airflow meets styleThe front features a distinctive ribbed mesh that draws air in precisely and reduces flow losses. An integrated guide with a 135° angle directs fresh airflow straight onto the GPU and CPU – for maximum cooling without heat buildup. Flexible mounts for fans or radiators are included, whether you prefer air or water cooling.HAVN BF 360 side viewCooling power for your high-end hardwareThere is room for up to seven fans: 3x front, 3x top, and 1x rear. Alternatively, you can install radiators up to 420 mm at the front. With 195 mm CPU cooler height clearance and a spacious interior, you have plenty of room for large air coolers or custom loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation at maximum performance.HAVN BF 360 rear side viewCompatibility without compromisesThe BF 360 offers enough space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm of room for graphics cards – suitable for current RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restrictions. Two modular drive trays can hold either 2x 2.5-inch or 1x 3.5-inch drives – naturally vibration-damped for quiet operation.HAVN BF 360 rear motherboard traySimpliCable & magnetic panels – smart & stress-freeSimpliCable provides pre-made cable routes, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grip edges and a practical pull strap – maintenance and upgrades have never been so easy.HAVN BF 360 I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re well equipped for the future, whether for gaming or as a workstation.
Midi tower with optimized airflow, mesh front, compatible with up to E-ATX, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels The HAVN BF 360 is perfect for gamers and hardware enthusiasts who want no compromises: robust cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and innovative SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUSpace for up to seven fans or two 360 mm radiatorsCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm clearance – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360HAVN BF 360: Airflow meets styleThe front features a distinctive ribbed mesh that draws in air precisely and reduces flow resistance. An integrated guide with a 135° angle directs fresh airflow straight to the GPU and CPU – for maximum cooling without heat buildup. Flexible mounts for fans or radiators support both air and water cooling solutions.HAVN BF 360 side viewCooling power for your high-end hardwareThe interior accommodates up to seven fans. Alternatively, you can install radiators up to 420 mm at the front. With clearance for CPU coolers up to 195 mm tall and a spacious interior, there is plenty of room for large air coolers or custom water-cooling loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation at peak performance.HAVN BF 360 side rearCompatibility without compromiseThe BF 360 offers ample space for motherboards up to E-ATX (maximum 277 mm wide). It provides a generous 410 mm clearance for graphics cards – perfect for current RTX and Radeon models.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restrictions. Two modular drive trays can accommodate either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you get pre-defined cable routes, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grip edges and a practical pull tab – maintenance and upgrades have never been so effortless.HAVN BF 360 I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C port, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re ready for the future, whether gaming or working.
The HYTE X50 is a stylish mid-tower case designed for demanding PC enthusiasts who want to combine design and functionality. With its innovative internal structure and high-quality workmanship, it is aimed at gamers, streamers, and builders with an eye for detail. Three-chamber layout separates heat sources for optimal airflow Supports up to ten 120 mm RGB fans for immense cooling performance 360 mm radiator support on both the top and bottom for powerful water cooling Panoramic glass side panel showcases your setup Magnetic cable management system for clean builds without effort HYTE X50: Innovative cooling concept with clear separation The HYTE X50 utilizes an intelligent three-chamber design that spatially separates the GPU, motherboard, and power supply. This provides unobstructed airflow, efficiently dissipating heat from the case. Direct airflow to your graphics card keeps it cool even during graphics-intensive games or 3D rendering, ensuring a constant supply of fresh air. Design meets functionality The case impresses with a curved glass side panel that elegantly showcases your system. The clear, symmetrical design is not only eye-catching but also thoughtfully constructed. Radiators up to 360 mm can be installed on the top and bottom, providing space even for high-end water-cooling setups. Modular interior and easy installation Building your system is made extremely simple thanks to well-designed details such as magnetically sealed cable guides, tool-less front and side panels, and flexible mounting options. Additionally, the USB-C port on the front provides lightning-fast access with up to 20 Gbit/s—ideal for modern peripherals and quick data transfers.
MasterFrame 500 Mesh Premium open-frame ATX case designed for modular builds, extreme cooling, and total customization through the FreeForm 2.0 platform. MasterFrame 500 MeshThe MasterFrame 500 Mesh is a premium open-frame mid-tower chassis built for high-performance components, advanced cooling setups, and limitless customization. Embracing the FreeForm 2.0 design philosophy, it supports ATX to E-ATX motherboards and provides full access to modular design files. With enhanced mesh panels for improved airflow, it empowers builders, modders, and creators to push the boundaries of PC design. Versatile & Maker-DrivenIts open source design and interchangeable panels offer endless personalization possibilities, transforming your chassis into a unique expression of style. Flexible Motherboard SupportSupports Mini-ITX to E-ATX motherboards, offering compatibility with a wide range of builds and configurations. Extensive Cooling SupportCan house up to eight fans and multiple radiator sizes (up to 360mm), ensuring superior thermal performance. Ample GPU ClearanceAccommodates graphics cards up to 390mm, offering plenty of space for high-end GPUs. Tool-Free Panel RemovalEasily remove side panels and other components without tools for quick access and modifications during build or upgrades. Included GPU support bracketThe included GPU support bracket prevents GPU sag and ensures stability during intense gaming or high-performance workloads, maintaining a clean and secure build.
Float in Form. Flow in Function.The CFV235 is a new kind of PC case featuring the innovative Central Floating Ventilation (CFV) structure. This divides the PSU cabin and main chamber, retooling the open space in between as a cooling advantage by accessing extra ventilation. An optimal combination of a full panoramic view, compact footprint and architecturally-enhanced cooling, the CFV235 empowers airflow beyond ordinary dimensions.Central Floating Ventilation free-floating separation provides a unique visual identity.True floating void adds an extra dimension of airflow across 270° of access.The Aurora RGB lighting strip brings the awe and glory of RGB lighting to the free-floating space.COUGAR Unity 240 single-frame PWM reverse-blade fans are preinstalled on the motherboard side.Accommodates a maximum GPU length of 430mm.Compatible with Reverse Connector / Mini ITX / Micro ATX / ATX / CEB motherboards.USB 3.2 Gen 2×2 Type-C (20 Gbps) x1, USB 3.0 Type-A x 2, 4 pole headset audio jack for versatile device connectivity.Houses 2 x 3.5” HDD drives and 2+2 2.5” SSD drives (converted from 3.5” drive bays)
Das Elite 681 definiert mit seinen 270°-Panorama-Hartglasplatten und dem echten Zweikammer-Layout den Showcase-Bereich neu. Entwickelt für Hochleistungssysteme, vereint es edle Ästhetik mit modernster Luftstromtechnik. Von der vertikalen Kühlung bis zur umfassenden Radiator-Kompatibilität ist dieses Gehäuse für den Einsatz mit Next-Gen-Hardware mit Stil und Präzision ausgelegt. Das Gehäuse unterstützt zwei 360-mm-Radiatoren (oben und unten) und einen 280-mm-Seitenradiator für benutzerdefinierte Schleifen oder leistungsstarke AIOs. Bis zu 10 Lüfter mit Anordnung von unten nach oben beschleunigen die Wärmeableitung und sorgen so für eine überragende Wärmeleistung. Das Elite 681 enthält 4 ARGB-Lüfter (3 Rückwärtseinlass + 1 Auslass) mit Daisy-Chaining und vollständiger Synchronisierung der Motherboard-Beleuchtung. Unterstützt GPUs bis zu 410 mm, perfekt für die neuesten Grafikkarten der nächsten Generation. Verfügt über USB 3.2 Gen 2x2 Typ-C (20 Gbit/s) und zwei USB 3.0-Anschlüsse für schnelle Konnektivität.
Kaarevad karastatud klaaspaneelid • Eelpaigaldatud ARGB jahutusventilaatorid • Õhuvoolule optimeeritud korpuse konstruktsioon • Toetab suuri graafikakaarte ja jahuteid • Ruumikas sisemus ja kaablite haldus
Mid-tower with panoramic view, supports GPUs up to 415 mm, CPU coolers up to 184 mm, compatible with motherboards up to E-ATX, featuring a back-connect design. With the Phanteks XT View Matrix, you can build a tidy, well-designed gaming PC. The case features two large tempered glass panels without a centre bar, offering an unobstructed view of your hardware. It supports modern components, such as E-ATX motherboards, large graphics cards, and a variety of fan and radiator options. Ideal for those seeking a clean setup: motherboards with rear connectors like ASUS BTF, MSI Project Zero, or GIGABYTE Project STEALTH are a perfect fit. The highlight is the integrated matrix display with 600 LEDs, which can be customised in many ways. Plenty of space for high-end hardware: Supports Mini-ITX to E-ATX Generous GPU compatibility: Graphics cards up to 415 mm in length Strong airflow: Up to nine fans and three radiators Panoramic view: Large glass surfaces without distracting bars 600-LED matrix: Displays, effects, and animations possible Phanteks XT View Matrix: Made for current gaming hardware The XT View Matrix PC case offers ample room for your dream setup: Mini-ITX to E-ATX boards fit easily inside, including motherboards with rear connectors. The 184 mm CPU cooler clearance allows for large air coolers. With seven PCIe slots and 415 mm of space for graphics cards, even large GPUs can be installed without any issues. A clear look through glass and clean cable management The glass front and side are completely frameless, providing a 270-degree view of your hardware. Smart cable management allows you to easily conceal all necessary cables, ensuring optimal airflow and a truly clean look. A special highlight is the integrated LED panel with 600 LEDs. Hidden behind a fabric surface, it displays system information, time, text, or animations, giving your PC a personalised touch. Great flexibility for fans and radiators You can install up to nine 120 mm fans and three radiators. Whether you prefer air or water cooling, your system can be tailored exactly to your needs. Strong cooling, perfect for high-performance hardware Top: Three 120 mm fans or two 140 mm fans / radiator up to 360 mm Side: Two 120 mm fans or 240 mm radiator (requires vertical GPU) PSU chamber: Three 120 mm fans for direct GPU ventilation Rear: 120 mm radiator or 120/140 mm fan This keeps your PC stable even under heavy load – whether using air or water cooling. NEXLINQ: Easy control for cooling & lighting The XT View Matrix is part of the Phanteks NEXLINQ system. With this, you can connect fans, coolers, and RGB lighting to a hub and conveniently control everything via software. Set automatic or custom fan curves and adjust your lighting colors – for quiet operation and a seamless appearance. Mid-tower with support for back-connect motherboards Additionally, motherboards from Mini-ITX to E-ATX – including models with back-connect such as ASUS BTF, MSI Project Zero, and GIGABYTE Project STEALTH are supported. This keeps the interior especially tidy. Modular I/O panel The I/O panel is located on the top of the case, allowing for perfect placement on your desk and providing easy access to ports.
The Viewport Mini, in its elegant black version, is a mini-tower case featuring front and side panels made of tempered glass, providing a panoramic view of the high-performance interior components. It supports Micro ATX and Mini-ITX motherboards and offers advanced cooling options with 7 fan slots and liquid cooling compatibility for 240/280 mm and 120 mm radiators. The included ARGB fans draw air in through mesh ventilation to optimize airflow. Ideally suited for gaming and high-performance applications, it accommodates GPUs up to 355 mm and CPU coolers up to 165 mm.
The Jonsbo X400 combines a striking design with maximum cooling performance – ideal for high-end setups with modern back-connect motherboards. The mix of steel, tempered glass, and technical ABS ensures a robust case with showroom appeal. Supports ATX, M-ATX, and ITX – also with back-connect layout Up to 13 fans: 3 top, 3 side, 2 rear, 2 back, 3 bottom Dual radiator support up to 360 mm – e.g. for AiO & custom loop GPU up to 427 mm, CPU cooler up to 176 mm – maximum hardware freedom USB-C (Gen 2) + 2× USB-A & audio/mic on the front panel Maximum space for high-end hardware The X400 offers uncompromising space for large GPUs, tall air coolers, and power supplies up to 180 mm. Perfectly suited for builds with powerful hardware and modern cable management via back-connect motherboards. Massive cooling capacity With up to 13 fans, the case provides an enormous airflow foundation. In addition, two radiators up to 360 mm can be installed – ideal for push/pull configurations or dual AiO setups. Elegant design meets technology Reinforced ABS frame, tempered glass, and a functional I/O panel make the X400 an eye-catcher with well-thought-out features. Thanks to USB-C, you are also perfectly equipped for modern peripherals.
The Corsair FRAME 4000X RS PC case was specifically designed for first-class airflow and ensures efficient cooling of your components. Thanks to the well-thought-out mesh panels and optimized airflow design, your PC system stays cool and powerful even under heavy load. Black mid-tower with built-in RGB front Wide range of fan and radiator mounting options for effective cooling performance Motherboards up to E-ATX, including back-connect designs Space for graphics cards up to 405 mm and CPU coolers up to 170 mm high Includes 4x RS120 fans Corsair FRAME 4000X RS: RGB PC case with built-in fans The Corsair FRAME 4000X RS mid-tower offers the perfect balance between size and functionality. With plenty of room for powerful hardware and efficient cooling, it is the ideal choice for gaming builds. Extensive cooling options with fans and radiators To keep your hardware cool under any workload, up to 13 120 mm fans can be installed in the Corsair FRAME 4000X RS at the same time. The top, front, and side support three 120 mm fans and two 140 mm fans. The top even supports two 200 mm fans. Two additional 120 mm fans can be installed above the power supply shroud, while one more 120 mm or 140 mm fan can be mounted at the rear. An AiO liquid cooler can also be installed without any problems if you prefer to cool your powerful hardware with liquid cooling. Large radiators up to 360 mm can be installed at the top, front, and side, while only 120 mm or 140 mm radiators can be installed at the rear. Four pre-installed fans make it easy to get started: three RS120 fans are mounted at the front, and one more at the rear. Installing your hardware The case offers enough space for powerful gaming hardware. It supports graphics cards up to 405 mm. Motherboards up to the E-ATX form factor are supported, including motherboards with rear-facing connectors. The CPU cooler should not exceed a height of 170 mm. A total of three drives can be installed to store programs and games.
The Xtender is a high-airflow panoramic case designed for maximum air circulation. Five pre-installed fans ensure efficient cooling of powerful components. The eye-catching E-ATX case is also equipped with modern connections and plenty of space for technology. A special highlight of the ARCTIC Xtender is the modern glass look, which is created by a seamless connection of the front and side panels made of tempered glass. The Xtender comes with five addressable ARGB fans ex works, three of which are inverted and pull the air from the side into the housing for ideal airflow. If you prefer to cool your case with water, you can also operate another radiator of up to 420 mm in addition to a 420 mm radiator. Three 2.5" drives are supported behind the mainboard tray. The removable drive cage offers mounting rails for two 3.5"/2.5" and another 2.5" drive. With a space of 482 mm, large graphics cards can also be used in the Xtender. Additionally, CPU coolers can have a height of up to 171 mm and power supplies can have a length of up to 318 mm. The well thought-out cutouts and the optimally placed cable holders ensure easy cable management. Easily removable, reinforced filters protect against dust and enable quick cleaning. Tower case type Color black EAN 4895265001321 Manufacturer no. ACPCC00024A Midi tower design Motherboard form factor E-ATX Material tempered glass, steel Window Kit Yes Internal dimensions plug-in card length maximum 482 mm Internal dimensions CPU cooler height maximum 171 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 318 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Back 2 x 120 mm P12 Pro A-RGB fans pre-installed Notes Cable management: 35 mm, dust filter: top, right side, top: 3 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed, side: 3 x 140 mm P14 Pro Reverse A-RGB fans pre-installed, alternatively 3 x 120 mm fans can be installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: up to 360/420 mm, Side: up to 360/420 mm. Rear connection of the mainboard No Feature Vertical GPU bracket pre-installed: 196x153x140 mm, up to 482 mm length, mounting up to 3 slots, Compatibility: PCIe 4.0 and backwards compatible, Riser cable: 160 mm, PCIe 4.0 x16 Learn more Modular removable fan rails to install 140mm fans on top or side Volume 65 l Dimensions Width: 23.1 cm x Height: 52.9 cm x Depth/Length: 52.9 cm Weight 15.4kg
The Fractal Design Define R5 is the next evolution in the widely popular Define Series. Packed with intelligently designed enthusiast-oriented features delivering a silent case with powerful and expansive air and liquid cooling ...
Classic 19" Rack with a lot of space for different drivesYou can remove the HDD cages with a few steps for easy mounting of internal devices.5 mounting slots with full height and the possibility to mount an ATX PSU ensures a professional and cost efficient solution.The lockable doors in front of the slots prevent, unauthorized access.Integrated air filters ensure clean air and a flawless cooling.KujutegurPüstikTüüpServerMaterjalTeras5,25" lahtrite arv43,5" lahtrite arv5Emaplaadi toetatud kujuteguridATX,Micro-ATX,uATX,Mini-ITXToote värvMustAknagaEi2,5" salvede arv2Sisemiste 3,5" salvede arv5Väliste 5,25" kettalahtrite arv4Püstikmontaaž3UMaterjali paksus1,2 mmSertifikaatRoHS, CEKaasas toiteplokkEiUSB 2.0 portide arv2AudiosisendEiAudioväljundEiInstallitud tagaventilaatorid2x 80 mmMaksimaalne tagaventilaatorite arv2Toetatud tagaventilaatorite läbimõõt80 mmToetatud kõvakettasuurused2.5,3.5"LED-indikaatoridVõimsus, HDDLähtestusnuppJahLaius485 mmSügavus530 mmKõrgus133 mmKaal9,34 kgPakendi laius560 mmPakendi sügavus630 mmPakendi kõrgus225 mmPakendi kaal11,1 kg
Housing type: Midi Tower ATX Motherboard format acceptable: m-ATX, ATX, Extended ATX, mini ITX 5.25 "bays (external) - 3.5 "bays (internal) 3 pcs 2.5 "bays (internal) 4 pcs The number of expansion slots: 7 +3 pcs. USB socket on the front panel: 1 x USB 3.0, 2 x USB 2.0 Front panel microphone jack: 1 piece. Headphone jack on the front panel: 1 piece. Tool-free assembly: No Height: 487 mm Width: 230 mm Depth: 440 mm Number of fans installed: 5 pcs (2x RGB LED front 20 cm., 1x RGB LED rear 14 cm., 2x top 14 cm) Number of places for additional fans: 0 Maximum length of graphics cards: 370 mm The maximum height of the CPU heat sink: 180 mm Water cooling support: Yes (Front: 360mm; Rear: 120mm) Housing color: Black and silver More information: Dust filter x 3 Tempered glass on the side of the housing LED backlight. Removable side panel 90 degree inverted HD cage Bottom mounted power supply. Cable arrangement system Kit contents: Remote control to control the backlight, screws, cable ties.
Internal 6x 2.5 "/3.5", 2x 2.5 ", 8x 2.5" /3.5 "(optional), 2x 2.5" (optional), Front I / O 1x USB-C 3.1 (20-pin Key-A header), 2x USB-A 3.0, 1x microphone, 1x headphones, PCI slots 9 (2x riser card), Fan (front) 2x 140mm, 1000rpm, 18.9dB (A) or 3x 140mm (optional), Fan (rear) 1x 140mm, 1000rpm, 18.9dB (A), Fan (top) 3x 140mm (optional), Fan (other) 2x 140mm (optional), Radiator sizes 120/140/240/280 / 360mm in front, 120/140/240/280/360 / 420mm above, 120/140/240 / 280mm below, 120mm in the back, Mainboard up to ATX (285mm wide), Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6") / E-ATX (12 "x11.2"), Power supply ATX (max. 250mm deep), PSU position below, CPU cooler max. 185mm height, Graphics cards max. 315mm (491mm without HDD cage without front fan, 467mm without HDD cage with front fan), Color black, inside black, Lighting without lighting, Dimensions (WxHxD) 240x475x541mm, Volume 61.67l, Weight 10.50kg, Enclosure type miditower, Special features Cable management, dust filter, integrated fan control, window made of glass, Note Mainboard and case manufacturers refer to different dimensions as E-ATX. Mainboards with E-ATX / SSI EEB dimensions of 305x330mm or 12 "x13" are not supported, w/o psu, FD-C-MES2A-03
DIMENSIONS : (D)420mm X (W)269.5mm X (H)380mm MOTHERBOARD : E-ATX (Max 280 mm wide)/ATX/ Micro-ATX/ Mini-ITX PSU : SFX/ SFX-L MATERIAL : Steel 4 mm Tempered Glass 2mm Aluminum (top and left panel) FAN SUPPORT : Top: 3x 120mm or 2x 140mm Side: 2x 120mm or 2x 140mm Bottom: 3x 120mm or 2x 140mm Rear: 1x 120mm RADIATOR SUPPORT : Top: 360mm or 280mm or 240mm radiator Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator GPU LENGTH CLEARANCE : 395mm CPU COOLER HEIGHT CLEARANCE : 170mm VGA Length : 370mm DRIVES : Right side 2 x 2.5″ SSD + back plate 2 x 3.5″ HDD (or SSD) EXPANSION SLOTS : 3 or 5 or 7 slots (depends on back panel) IO PORTS : 2 x USB 3.0, 1 x USB 3.1 TYPE-C, 1 x HD Audio, Power Button DUST FILTERS : 1 x Top, 1 x Bottom, 2 x Side
Dimensions: 212 x 465 x 398 mm (W x H x D) Material: steel, acrylic glass, plastic Weight: 5.8 kg Color: white, black Form factor: ATX, Micro-ATX, Mini-ITX Fan possible: 3x 120 mm (front) 1x 120 mm (rear) 2x 120/140 mm (cover) 2x 120 mm (bottom) 2x 120 mm (vertical bracket) Fan pre-installed: 1x 120 mm (front) 1x 120 mm (rear) Radiator mountings: 1x 240 mm (cover) 1x 240 mm (vertical bracket) Drives: 2x 3.5 / 2.5 inches (internal) 4x 2.5 inches (internal) Power supply (optional): standard ATX Expansion slots: 7 I / O panel: 1x USB 3.0 2x USB 2.0 1x per audio in / out 1x LED control button 1x power button 1x reset button Maximum graphics card length: 340 mm Maximum power supply length: 190 mm Maximum CPU cooler height: 163 mm
Product kirjeldus: AORUS C700 GLASS - FT - ATX Product Type: System cabinet Form Factor: Full Torn värv: must I/O Ühendusi: 1 x USB 3.1 Gen 2 4 x USB 3.0 1 x HDMI 1 x microphone 1 x kõrvaklapid Supported Motherboards: ATX, microATX, Mini-ITX, Extended ATX System Cabinet Features: Supports Kuni 360 mm radiator in front panel, toetab Kuni 140 mm radiator in rear panel, 2 tempered glass side panels, ARGB controller, RGB Fusion 2.0, toetab Kuni 420 mm radiator in top panel Power Device: No toiteplokk Specification Compliance: ATX mõõtmed (WxDxH): 30.1 cm x 71.4 cm x 67.1 cm kaal: 19.2 kg