The FSP U530-BS comes with four high-density, sound-dampening side panels that significantly reduce ambient noise. Reinforced with 0.7 mm thick SPCC steel plates, it keeps noise levels to a minimum, so you can focus undisturbed on your work or gaming. The front fan is equipped with special fan covers that ensure targeted airflow and additional noise dampening. Thanks to the four pre-installed quiet 120 mm fans (three at the front and one at the rear), the case delivers outstanding cooling performance. Even with the most demanding components, the system stays cool and efficient. It supports radiators up to 360 mm and ensures your components are reliably cooled even under heavy load. The FSP U530-BS case offers enough space for high-performance graphics cards up to 375 mm in length and a CPU cooler height of up to 175 mm. An integrated graphics card support keeps even heavy components stable without wobbling. The spacious interior allows easy installation of EEB, E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards and provides ample room for a versatile system configuration. In addition to its excellent functionality, the U530-BS impresses with a minimalist and elegant design. It offers excellent air circulation, optimized by mesh dust filters and fan covers. With practical support for ATX power supplies and various drive sizes (3.5" and 2.5" SSD), this case can be perfectly adapted to your needs.
The Jonsbo X400 combines a striking design with maximum cooling performance – ideal for high-end setups with modern back-connect motherboards. The mix of steel, tempered glass, and technical ABS ensures a robust case with showroom character. Supports ATX, M-ATX, and ITX – also with a back-connect layout Up to 13 fans: 3 top, 3 side, 2 rear, 2 backside, 3 bottom Dual radiator support up to 360 mm – e.g. for AiO & custom loop GPU up to 427 mm, CPU cooler up to 176 mm – maximum hardware freedom USB-C (Gen 2) + 2x USB-A and audio/mic on the front panel Maximum space for high-end hardware The X400 offers uncompromising space for large GPUs, tall air coolers, and power supplies up to 180 mm. Perfectly suited for builds with powerful hardware and modern cable management via back-connect motherboards. Massive cooling capacity With up to 13 fans, the case offers an enormous airflow foundation. In addition, two radiators up to 360 mm can be installed – ideal for push/pull configurations or dual AiO setups. Elegant design meets technology Reinforced ABS frame, tempered glass, and a functional I/O panel make the X400 an eye-catcher with thoughtfully designed features. Thanks to USB-C, you are also well equipped for modern peripherals.
Beautifully crafted and engineered to maximize cooling potential with its amazing expansion flexibiltiy, the Enthoo Pro is the budget friendly mid-tower from Phanteks. Embracing many features from the Enthoo Primo, without the price tag. This case has mulitple radiator support, removable ssd bracket, closed HDD panel, and velcro cable management. The Enthoo Pro, trying to establish its own solid reputation like the award winning Enthoo Primo.Features:Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks’ new redesigned and better performing SP series fans. Budget friendly case, Phanteks’ Enthoo Pro, unleash unlimited possibilities.KujutegurFull-TowerTüüpPCMaterjalPlast, Teras5,25" lahtrite arv33,5" lahtrite arv6Emaplaadi toetatud kujuteguridATX,EATX,Micro-ATXToote värvMustAknagaEi2,5" salvede arv7Sisemiste 3,5" salvede arv6Väliste 5,25" kettalahtrite arv3SobilikMängimineLaienduspesade arv8CPU jahuti maksimaalne kõrgus19,3 cmGraafikakaardi maksimaalne pikkus47,2 cmKaasas toiteplokkEiUSB 2.0 portide arv2USB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahInstallitud esiventilaatorid1x 200 mmMaksimaalne esiventilaatorite arv2Toetatud esiventilaatorite läbimõõt120,140,200 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt120,140 mmMaksimaalne ülemiste ventilaatorite arv3Toetatud ülemiste ventilaatorite läbimõõt120,140,200 mmMaksimaalne alumiste ventilaatorite arv2Toetatud alumiste ventilaatorite läbimõõt120,140 mmVentilaatori kiirus1200VedelikjahutusJahToetatud eesmise radiaatori ventilaatori suurused240 mmToetatud tagumise radiaatori ventilaatori suurused140 mmToetatud ülemise radiaatori ventilaatori suurused420 mmToetatud kõvakettasuurused2.5"Laius235 mmSügavus550 mmKõrgus535 mmKaal11,4 kgPakendi kaal13,3 kgMüratase19 dB
The Grandia GD10, along with GD09, is a culmination of SilverStone’s decade-long experience in HTPC case design and manufacturing into a product that every PC enthusiast can enjoy. The incredible efficiency in which it utilizes all available space results in a case that is close in size externally to Micro-ATX based GD04 and GD05, yet capable of fitting most important full size standard components including wider ATX motherboards (SSI-CEB) such as ROG or other gaming-centric models. All drive cages have been designed similarly to those from the popular ML03 case to provide maximum flexibility in drive configuration without the need for additional adapters. For cooling, all positive pressure and smooth airflow designs were retained from previous Grandia models while improvements were made to filter access for even easier maintenance. With the addition of a lockable front door, the GD10 offers an attractively sized case that is capable and user-friendly for those interested in building a system with extra security and application that exceeds typical PC or HTPC environments.- Lockable front door ensures security of system and drives- Positive air pressure design for excellent cooling/quietness and dust-prevention- Support expansion cards up to 12.2 inches- Support ATX motherboards- Quick access filters included- Incredible 362mm depth to fit comfortably inside home theater cabinet- Drive cages with multi-purpose mounts eliminate need for adaptersFormat ATX, SSI-CEBMaximum graphics card lenght 310 mmMaximum CPU-Cooler Height 138 mmSpecial Featuress two 120-mm-Fan auf der rechten Seite included (900 U/min, 18 dB(A)); ein 120-mm-Fan auf der linken Seite included (900 U/min, 18 dB(A)), compatible with 80-mm-FanPower Supply SlotDesign ATXDrive Baysexternal 5,25 inches 1internal 3,5 inches 22,5 inches 1FansIncluded 3x 120 mmInstallable 2x 80 mmFront-SidePorts USB 3.0 2Audio 2Back-SideSlots Full-Size 7additional Full-Size 1Product dimensions 442 x 171 x 362 mmWeight 4.8 kg
Internal 2x 2.5 "/3.5" (transverse, drive rails), 1x 2.5 "/3.5", 4x 2.5 ", Front I / O 2x USB-A 3.0, 1x microphone, 1x headphones, PCI slots 10 (3x riser card), Fan (front) 1x 140mm (RGB illuminated) or 3x 140mm (optional), Fan (rear) 1x 140mm (RGB illuminated), Fan (top) 2x 140mm (optional), Radiator sizes 120/240/280 / 360mm in front, 120 / 240mm above, 120mm in the back, Mainboard up to ATX (E-ATX with unknown dimensions possible), Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6") / E-ATX (unknown dimensions), Power supply ATX (max. 233mm deep), PSU position below, CPU cooler max. 180mm height, Graphics cards max. 387mm (without radiator), Color black, inside black, Lighting RGB header 3-pin ARGB (+ 5V / DATA / GND), integrated LED control, integrated RGB-LED lighting, illuminated fans, Dimensions (WxHxD) 230x502x491mm, Volume 56.69l, Enclosure type miditower, Special features Cable management, dust filter, graphics card holder, incl. Fan control, viewing window made of glass, Note Mainboard and case manufacturers refer to different dimensions as E-ATX. This manufacturer does not provide any information on supported E-ATX dimensions. Mainboards with E-ATX / SSI EEB dimensions of 305x330mm or 12 "x13" may not be supported, w/o psu, AEROPGSVISOR-G-BK-V1
Product kirjeldus: MSI MAG Forge 100M - Torn - ATX Product Type: System cabinet Form Factor: Torn värv: must I/O Ühendusi: 2 x USB 3.2 Gen 1 1 x microphone 1 x kõrvaklapid Supported Motherboards: ATX, microATX, Mini-ITX System Cabinet Features: Supports 240 mm radiator in front panel, toetab 240 mm radiator in top, toetab 120 mm radiator in rear, tempered glass side panel, bottom dust filter, top magnetic dust filter, LED control button Power Device: No toiteplokk Specification Compliance: ATX mõõtmed (WxDxH): 21 cm x 42.1 cm x 49.9 cm kaal: 5.64 kg
Fractal Design Torrent - Torn - extended ATX Product Type: System cabinet Form Factor: Torn värv: valge I/O Ühendusi: 1 x USB 3.1 Gen 1 2 x USB 3.0 X audio sisend X audio joon-out Supported Motherboards: ATX, microATX, Extended ATX, SSI CEB, SSI EEB, ITX System Cabinet Features: Front dust filter, bottom dust filter, toetab Kuni 420 mm radiator in front panel, PSU shroud, tool-less side panels (push-to-lock), clear tint tempered glass side panel, toetab Kuni 420 mm radiator in bottom panel Power Device: No toiteplokk Specification Compliance: ATX mõõtmed (WxDxH): 24.2 cm x 54.4 cm x 53 cm kaal: 10.8 kg
The NZXT H7 enclosures are adaptable, easy to build and have plenty of room for components. Perforated top and front panels improve air circulation and the front and side panels open without tools. Intuitive cable management ...
Unique Design & Powerful Heat Dissipation The AX90 features a unique mesh front panel design and excellent cooling performance. The full-view tempered glass side panel design allows you to show off your gaming configurations without any obstacles. 11 x 120mm fans can be installed simultaneously.
XPG INVADER X. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Placering af strømforsyning: Bund. Understøttede diametre for sideventilatorer: 120 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 245 mm, Dybde: 475 mm, Højde: 448 mm
XPG INVADER X. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Placering af strømforsyning: Bund. Understøttede diametre for sideventilatorer: 120 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 245 mm, Dybde: 475 mm, Højde: 448 mm
Midi-tower with improved integrated 4K screen including touch function688 x 2,560 (2.5K) resolution and 60 Hz refresh rateSide panel and front made of tempered glassFresh air intake at the bottomVertical mounting of the graphics card possiblePCIe 4.0 riser cable includedRadiators can be mounted on the side, top, or rearGraphics cards up to a length of 390 mm possibleMaximum CPU cooler height of 180 mm
Tootekood: AIR 100 LITE (B)GTIN: 4710562740691Korpused
Small midi tower with tempered glass on the side, up to eight fans, space for a radiator up to 280mm, motherboards up to Micro-ATX, GPU up to 330mm and CPU cooler up to 161mm in height, up to four drives possible, two 120mm fans includedSmall case with tempered glass side panel Efficient cooling options with up to eight fans and radiators up to 280mm Support for motherboards up to Micro-ATX Space for graphics cards up to 330mm and CPU coolers with a height of up to 161mm Up to four drives possible Two 120mm fans included The Montech AIR 100 LITE: Minimalist case with high cooling performance The Montech AIR 100 LITE is the smaller variant of the Montech AIR 100 and impresses with its lightweight and minimalist design. Nevertheless, this midi tower offers extensive options for installing your hardware - particularly a variety of fans to keep your system cool. Well-cooled with fans and radiators Despite its small size, up to eight fans can be installed in the tower. The front supports a maximum of three 120mm or two 140mm fans. You can install two 120mm or 140mm fans at the top. A further 120mm fan can be installed at the rear, as well as up to two more 120mm fans above the power supply chamber. Two 120mm fans are already included at the front and rear. If you prefer water cooling - whether an all-in-one water cooler or a custom-built water cooling system - there are several locations where a radiator can be installed. The front supports a radiator up to a maximum of 280mm, the top supports a 240mm radiator, and another 120mm radiator can be installed at the rear. Hardware options The midi tower supports the installation of graphics cards up to 330mm in size. Motherboards up to Micro-ATX format are feasible. The CPU cooler should not exceed a height of 161mm. To store programs and games, up to four drives can be installed.
Dieses Aluminium-Gehäuse von Delock dient dem Einbau einer 2.5″ SATA Festplatte oder SSD. Trotz der schlanken Bauform können Festplatten bis zu einer Höhe von 9,5 mm eingebaut werden. Dank des VIA Chipsatzes unterstützt dieses Festplattengehäuse SuperSpeed USB mit bis zu 10 Gbps Übertragungsgeschwindigkeit. Somit kann die volle SATA 6 Gb/s Übertragungsrate der Festplatte ausgenutzt werden. Über eine am Gehäuse verbaute USB Type-C Buchse wird das externe Gehäuse mit einem PC oder Notebook verbunden. Das beiliegende USB Type-C zu USB Typ-A Kabel ermöglicht den Anschluss an eine freie USB Typ-A Buchse. Selbstverständlich kann das Gehäuse auch via optionalem USB Type-C Kabel an eine freie USB Type-C Buchse oder einen freien Thunderbolt Port angeschlossen werden.
