GIGABYTE C301 GLASS V2 - Optimized Airflow Design - RGB Fusion with ARGB Connector Hub - Support Motherboards up to E-ATX - Up to 360mm Liquid Cooling Compatible - Support Vertical GPU Installation - Full-Size Tempered Glass Side Panel - With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel - Pre-installed 4 ARGB fans
Compact dual-chamber midi tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case lid for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 in the front panel
Experience peak performance and vibrant RGB within an innovative compact dual-chamber. Prioritizing GPU cooling, the H6 Flow's panoramic glass showcases the interior while freeing up space for improved airflow. Wraparound glass panels with a seamless edge provides an unobstructed view of the inside to highlight key components. Compact dual-chamber design improves overall thermal performance and creates a clean, uncrowded aesthetic. Includes three pre-installed 120mm RGB fans positioned at an ideal angle for optimal out-of-the-box cooling and vibrant RGB lighting. The top and side panels feature an airflow-optimized perforation pattern to enhance overall performance and filter dust. An intuitive cable management system simplifies the build process by using wide channels and straps. Tool-free access to the top and side panels makes upgrading quick and convenient. Top panel supports radiators up to 360mm in length. Up to 365mm GPU and 200mm PSU clearance. Compact Dual-Chamber Improves cooling performance and creates an uncrowded aesthetic. Colorful Cooling 3 x 120mm RGB fans are angled for optimal out-of-the-box cooling with vibrant RGB lighting. High Performance Airflow Perforation pattern on the panels is optimized for maximum airflow. Cable Management Easily manage cables with the wide channels and included straps. Tool-Free Entry Access the top and side panels without tools for quick upgrades. Spacious Support Up to a 360mm radiator in the top and clearance for a 365mm GPU.
GIGABYTE C500 PANORAMIC STEALTH KEY FEATURE - Panoramic Tempered Glass Front and Side Panels - Optimized Airflow Design - Support Back-Connect Motherboard Design, Compatible with GIGABYTE Stealth Series - RGB Fusion with ARGB Connector Hub - Support Vertical GPU Installation - With USB 3.0 x2 and USB 3.2 Gen2 Type-C x1 on I/O panel - Pre-installed four ARGB fans
XG172 | MidiTower | PSU Not included | Cooling Fan Support (mm): Side:2x 120mm Top:3x120mm / 2x140mm Rear:1 x 120mm Bottom: up to 3 x 120mm | Dimensions 421 x 220 x 490mm
The MSI MPG VELOX 300R AIRFLOW PZ is a Midi Tower PC case in sleek black. It features a bottom-mounted power supply placement and supports ATX form factor PSUs. The case comes with 2x 160 mm front fans pre-installed and supports additional front fans of 120, 140, or 160 mm, as well as 120 mm side fans. Storage support includes both 2.5" and 3.5" HDDs, plus 2.5" SSDs. Dimensions are 235 mm (width) x 485 mm (depth) x 518 mm (height).
Xtender VG (White) | PSU Not included | 2x P12 Pro A-RGB (pre-installed at rear), 3x P14 Pro Reverse A-RGB (pre-installed at side) | Dimensions 529 x 231 x 529 mm
With the Lian Li LANCOOL 217 INF, you'll get a PC case that cleverly combines aesthetics and airflow. Based on the LANCOOL 217, it offers you practical features such as tool-free fan installation, flexible power supply positions, and a repositionable front I/O. The front features tempered glass with mirror, infinity effect, and RGB lighting—there are two integrated 170 mm fans at the front to deliver fresh air directly into the system. There's plenty of space: Mini-ITX to SSI-EEB motherboards, large GPUs, multiple drives, and ATX power supplies are all supported. Elegant glass front: Tempered glass with surrounding RGB infinity effect High airflow: Two 170 mm ARGB fans integrated into the front glass Versatile compatibility: Supports motherboards from Mini-ITX to SSI-EEB Fits large graphics cards: Seven PCIe slots, space for GPUs up to 380 mm Flexible adjustments: Variable PSU installation & repositionable front I/O Stylish design: RGB lighting for a unique look Lian Li LANCOOL 217 INF: Strong airflow despite glass front LANCOOL 217 INF glass front with infinity mirror The glass front combines showcase aesthetics with effective airflow. The mirror with infinity effect and RGB lighting runs over the edges, while two 170 mm ARGB fans are positioned directly at the front. They provide high airflow at a pleasant noise level—ideal to reliably keep your components cool. Midi tower for modern hardware LANCOOL 217 INF side view The Lian Li LANCOOL 217 INF has space for Mini-ITX up to SSI-EEB motherboards—even for boards with back-connect. Thanks to 7 PCIe slots and 380 mm clearance for GPUs, your powerful high-end graphics card will easily fit into the case. There are also enough fan mounts for you to expand your components' cooling as needed. Flexible cooling & customizable I/O The top supports up to three 120 mm or two 140 mm fans, with one 120 mm or 140 mm fan at the rear. A 140 mm RGB fan is pre-installed at the rear. The front I/O module with 2× USB-A, USB-C, and 3.5 mm combo can be mounted at the top or side—so it’s easily accessible in any setup, no matter how your build is arranged. Easily controllable, powerful RGB lighting LANCOOL 217 INF interior view Lighting control: Two RGB buttons directly on the case 15 lighting effects: Selectable by button press Software control: Synchronizable via L-Connect 3 Wireless ready: Can connect to Lian Li Wireless Controller Quiet performance: 170 mm fans at max. 34 dB(A) The Lian Li LANCOOL 217 INF offers you striking RGB highlights: a large infinity mirror at the front plus pre-installed ARGB fans. Control effects and colors directly via two buttons next to the power button without needing any software. Optionally, you can synchronize everything with Lian Li Wireless and L-Connect 3—including fan curves for the perfect balance of noise and cooling. For RGB fans, airflow enthusiasts, and tinkerers: The LANCOOL 217 INF combines powerful cooling, a flexible layout, and eye-catching design in one case.
Das Elite 481 Wood bringt eine warme, wohnliche Ästhetik in leistungsstarke PC-Builds. Mit einem kompakten mATX-Layout mit zwei Kammern und einer aus echtem Naturholz gefertigten Frontblende verbindet es moderne Leistung mit organischen Designelementen. Mit nahtlosem Hartglas, vertikaler Kühlungsunterstützung und Kompatibilität mit Full-Size-Radiatoren ist das Elite 481 Wood ein vielseitiges Gehäuse, das mühelos in Wohnräume, Kreativstudios oder stilvolle Gaming-Setups passt. Die einzigartige Frontblende aus echtem Holz sorgt für einen natürlichen, warmen Farbton, der zu Wohnräumen, kreativen Umgebungen und Spielzimmern gleichermaßen passt und Technologie mit Lifestyle verbindet. Zwei Scheiben aus gehärtetem Glas mit abgeschrägten 45°-Kanten ermöglichen einen klaren Panoramablick auf Ihre Komponenten und Ihre Beleuchtungseinrichtung. Getrennte Bereiche für Hardware und Kabel sorgen für einen effizienten Luftstrom und ein übersichtliches Layout. Die rechte Kammer enthält ein oben montiertes Netzteil und 95 mm Platz für das Kabelmanagement. Unterstützt bis zu 9 Lüfter mit einem von unten nach oben verlaufenden Luftstrom, der die Wärmeabfuhr beschleunigt und eine optimale Systemleistung bietet. Trotz seiner kompakten Größe unterstützt das Elite 481 Wood zwei 360-mm-Radiatoren (oben und unten) und einen 280-mm-Radiator an der Seite - eine flexible Kühlung auf ATX-Niveau. Das Gehäuse enthält 3 ARGB-Lüfter - 2 seitliche Ansauglüfter mit umgekehrten Blättern und 1 rückwärtiger Abluftlüfter. Jeder Lüfter verfügt über Daisy-Chain-Anschlüsse für ein sauberes Kabelmanagement und eine optimierte Einrichtung und ist vollständig kompatibel mit der ARGB-Software der wichtigsten Motherboards für eine synchronisierte Beleuchtungssteuerung. Mesh-Paneele an der Ober- und Unterseite sorgen für eine ausreichende Luftzirkulation und verbessern die thermische Effizienz. Mit zwei USB 3.0 Typ-A-Anschlüssen und einem USB 3.2 Gen 2x2 Typ-C-Anschluss mit einer Übertragungsgeschwindigkeit von bis zu 20 Gbit/s - perfekt für schnellen Datenzugriff und moderne Gerätekonnektivität
The Chieftec Visio tower chassis combines functionality with style, making it a choice for PC enthusiasts looking to create a sleek and efficient build. With a well-designed cable management system, the interior remains organized, allowing for optimal airflow and cooling performance. The tempered-glass windowed side panel showcases the internal components, illuminated by customizable ARGB lighting from the included PWM connector hub.Featuring ample internal bays, this chassis supports up to 4 storage devices, accommodating both 2.5" and 3.5" drives. The cooling system offers configurations, allowing for the installation of multiple fans or even a 240mm radiator. Compatibility with various motherboard form factors such as ATX, microATX, and Mini-ITX ensures that users can easily tailor their setup to meet their needs while benefiting from essential front panel connectors like USB and audio.
The Lian Li DAN Cases A3-mATX Wood Edition in white combines minimalist design with luxurious functionality. With its elegant beech wood front, excellent airflow through mesh panels, and flexible customization options, it is the perfect choice if you want a powerful, compact setup. White Micro-ATX case by Lian Li in collaboration with DAN Cases Elegant front cover made of noble beech wood Mesh panels on the sides and top for excellent airflow Flexibly customizable: Let your imagination run wild Excellent cooling thanks to space for 360 mm radiators Suitable for motherboards in Micro-ATX or Mini-ITX form factor Supports various power supplies from SFX to ATX
PURE BASE 501 DX | MidiTower | PSU Not included | Fan at top 1x Pure Wings 3 140mm PWM White; Fan at front 1x Pure Wings 3 140mm PWM White; Fan at rear 1x Pure Wings 3 140mm PWM White | Dimensions 450 x 231 x 463
The CORSAIR FRAME 4000D RS ARGB is a fully-modular and spacious mid-tower PC case featuring InfiniRail™ Fan Mounting System and compatible with reverse connector motherboards.Includes: Fully-modular design for next-level customization InfiniRail™ Fan Mounting System for easier building Includes three RS120 ARGB performance fans Dual 360mm radiator support GPU anti-sag stabilization arm Compatible with reverse connector motherboards
The Lian Li DAN Cases A3-mATX Wood Edition in black combines modern design with an elegant walnut wood front panel. Thanks to excellent airflow through mesh panels, flexible configuration options, and space for high-end hardware, this case is the ideal choice for those seeking performance and style in a compact format. Perfect for demanding builds with a personal touch! Micro-ATX case by Lian Li in collaboration with DAN Cases Elegant front cover made from premium walnut wood and side panel of tempered glass Mesh panel on the top for excellent airflow Flexibly customizable: Let your imagination run wild Outstanding cooling thanks to space for 360 mm radiators Suitable for motherboards in Micro-ATX or Mini-ITX form factors Supports various power supplies from SFX to ATX A touch of luxury: The Lian Li DAN Cases A3-mATX Wood Edition in black If you're looking for a small form factor case for high-performance PC hardware, you should take a closer look at the Lian Li DAN Cases A3-mATX Wood Edition. This case combines a minimalist design with premium features: the elegant walnut wood front gives your setup an exclusive touch. With a capacity of about 26 liters, this Micro-ATX case is compact and space-saving. At the same time, the A3-mATX Wood Edition is perfect for high-end PC components, offering effective cooling despite its small size. With plenty of room for fans and radiators and generous ventilation openings, this mini tower easily meets the demands of powerful hardware. Flexibility meets performance: The fan and cooling options of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX Wood Edition offers space for up to 10 fans in the 120 mm format. These can be distributed as follows: three on the top, three on the side, three on the bottom, and one on the rear. Alternatively, two 140 mm fans can be mounted on both the top and side. With 25 mm thick fans on the case bottom, the GPU’s height is limited to 61 mm (3 slots). CPU air coolers can be up to 165 mm tall. Lian Li and Daniel Hansen also considered water cooling when developing the A3-mATX: A radiator can be installed in three locations inside the case: either a 360 mm (triple radiator) or 280 mm (dual radiator) on the top or the side. You must choose one of these two positions. The bottom of the case accommodates an additional 240 mm radiator. If you mount the fans below the radiator, you can even install a 360 mm radiator. Customizable configuration: The versatile possibilities of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX is suitable for a motherboard in Micro-ATX or Mini-ITX form factor. Unlike a Mini-ITX case, the PC case offers four expansion slots, allowing you to install a graphics card up to 4 slots tall and up to 415 mm long. You can install two 2.5-inch SSDs on a bracket. You can also install a 3.5-inch HDD or another 2.5-inch drive at the bottom of the case. You have the choice between an ATX, SFX-L, or SFX power supply, which you can mount flexibly at the front or side to create more space for your graphics card or the radiator—just as you prefer. In general, the smaller the power supply in the A3-mATX, the more room you have for the rest of your hardware. The I/O panel on the front of the Lian Li DAN Cases A3-mATX Wood Edition features two USB 3.0 Type A ports, one USB 3.1 Type C port, two 3.5 mm audio jacks (Mic-In/Audio-Out), and a power button. Note: The Lian Li DAN Cases A3-mATX Wood Edition offers numerous configuration options, but space inside this case is limited. The size and position of the power supply are crucial in selecting the right PC components. Therefore, we recommend careful planning using the manual in advance.
Keep your components at optimal temperature with the Corsair Frame 5000D RS ARGB, the perfect choice for anyone who values powerful cooling. Its air-permeable design and optimized airflow architecture ensure ideal cooling, even during long gaming sessions or high system loads – a case that perfectly combines performance and cooling. White midi-tower with a breathable steel cover at the front Effective cooling performance with up to 14 fans and radiators up to 420 mm Supports motherboards up to E-ATX and back-connect design support Space for graphics cards up to 450 mm and CPU coolers up to 175 mm in height Four pre-installed RS140 ARGB fans Corsair Frame 5000D RS ARGB: Midi-Tower for High-Performance Hardware The Corsair Frame 5000D midi-tower offers the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it is the ideal choice for gaming builds. Comprehensive Cooling Options To keep your hardware cool under any load, the Corsair Frame 5000D RS ARGB can be equipped with up to 14 fans simultaneously. The top panel supports three 120 mm or 140 mm fans. At the front, you can also install up to three 120 mm or 140 mm fans, or even two 200 mm fans. The fan mounts on the top and front are adjustable, giving you much more flexibility when installing your fans. At the bottom, you can install another four 120 mm fans, while the side supports three fans, either 120 mm or 140 mm. At the rear, you can install one 120 mm or 140 mm fan. Four high-quality 140 mm RS ARGB fans from Corsair come pre-installed – three at the front and one at the back. The daisy-chained connectors ensure an easy setup. If you prefer water cooling – whether an AiO or a custom water cooling system – radiators can also be installed. The top can accommodate a radiator up to 420 mm, while the front and side support a 360 mm radiator. There is also room at the rear for a small 140 mm or 120 mm radiator. Installing Your Hardware The case offers plenty of space for high-performance gaming hardware. It supports the installation of large graphics cards up to 450 mm. An included support arm ensures your GPU doesn’t sag. Additionally, vertical installation is possible with a suitable riser cable, which can be purchased separately. Motherboards up to E-ATX format are supported – including boards with a back-connect design. Thanks to hidden cables, the interior of your gaming PC looks much tidier. The CPU cooler should not exceed a height of 175 mm. To store programs and games, you can install a total of eight drives – six 2.5-inch SSDs and two 3.5-inch HDDs.
With the Lian Li LANCOOL 217 INF, you get a PC case that cleverly combines aesthetics and airflow. Based on the LANCOOL 217, it offers you practical features such as tool-less fan installation, flexible PSU positioning, and a movable front I/O. The front features tempered glass with a mirror, infinity effect, and RGB lighting—integrated into the front are two 170 mm fans that direct fresh air straight into the system. There's plenty of space: anything from Mini-ITX to SSI-EEB motherboards, large GPUs, multiple drives, and ATX PSUs fit easily. Elegant glass front: Tempered glass with all-around RGB infinity effect High airflow: Two integrated 170 mm ARGB fans in the front glass Versatile compatibility: Supports motherboards from Mini-ITX up to SSI-EEB Room for large graphics cards: Seven PCIe slots, supports GPUs up to 380 mm in length Highly adaptable: Variable PSU installation & movable front I/O Stylish design: RGB lighting for a unique look Lian Li LANCOOL 217 INF: Strong airflow despite a glass front LANCOOL 217 INF glass front with infinity mirror The glass front combines showcase appeal with effective airflow. The mirror with infinity effect and RGB lighting runs along the edges, while two 170 mm ARGB fans are installed directly in the front. They deliver high airflow at pleasant noise levels—perfect for reliably keeping your components cool. Midi-Tower for today's hardware LANCOOL 217 INF side view The Lian Li LANCOOL 217 INF can accommodate motherboards from Mini-ITX up to SSI-EEB—including boards with back-connect. Thanks to 7 PCIe slots and 380 mm of clearance for GPUs, your powerful high-end graphics card will fit with ease. In addition, there are enough fan mounting spots, so you can expand cooling for your components as needed. Flexible cooling & I/O as you like The top can fit up to three 120 mm or two 140 mm fans, and the rear supports either a 120 mm or 140 mm fan. A 140 mm RGB fan comes pre-installed in the rear. The front I/O module with 2× USB-A, USB-C, and a 3.5 mm combo jack can be mounted either on the top or the side—ensuring easy access in any setup, no matter how you configure it. Easy-to-control, powerful RGB lighting LANCOOL 217 INF interior view Lighting control: Two RGB buttons directly on the case 15 lighting effects: Selectable with a button press Software control: Synchronizable via L-Connect 3 Wireless ready: Compatible with Lian Li Wireless Controller Quiet performance: 170 mm fans at a maximum of 34 dB(A) The Lian Li LANCOOL 217 INF offers powerful RGB highlights: a large infinity mirror on the front and pre-installed ARGB fans. Using two buttons next to the power button, you can control effects and colors directly—without the need for additional software. Optionally, you can synchronize everything via Lian Li Wireless and L-Connect 3—including fan curves for the ideal balance between noise and cooling. For RGB fans, airflow enthusiasts, and tinkerers alike: the LANCOOL 217 INF combines strong cooling, a flexible layout, and eye-catching design in a single case.
Das Elite 690 verfügt über zwei gehärtete Glasscheiben, die Ihr System in Szene setzen, während eine holzstrukturierte Front und ein Mesh-Einlass Wärme mit effizientem Luftstrom verbinden. Dank der oberen und unteren Belüftung für vertikale Kühlung unterstützt es vielseitige Lüfter- und Kühlerkonfigurationen – perfekt für leistungsorientierte oder stilvolle Systeme. Die vertikale Anordnung trennt die Wärmezonen für eine bessere Luftzirkulation und eine sauberere Kabelführung. Bis zu 10 Lüfter in einer von unten nach oben verlaufenden Anordnung maximieren den Luftstrom und die Kühlung. Die aus echtem Holz gefertigte Frontplatte verleiht jedem Raum eine warme, organische Note. Das Gehäuse enthält 3 in Reihe schaltbare ARGB-Lüfter mit vollständiger Unterstützung für die Beleuchtungssynchronisierung des Motherboards. Das Elite 690 verfügt über einen USB 3.2 Gen 2x2 Typ-C und zwei USB 3.0-Anschlüsse für blitzschnelle Konnektivität.
Die North Momentum Edition ist eine neue, leistungsorientierte Version des ikonischen North-Gehäuses und ermöglicht verbesserte Kühlung direkt ab Werk. Das charakteristische offene Holzfront-Design und die fein gemusterte Mesh-Belüftung werden durch drei leistungsstarke Momentum-12-Lüfter mit LCP-Lamellen für einen leisen und effizienten Luftstrom ergänzt. Eine Front aus geschwärzter Eiche in Kombination mit dunklen Metallakzenten erzeugt eine stimmige, komplettschwarze Optik, die sich nahtlos in jedes Gaming-Setup einfügt. Im Innenraum bietet das geräumige und durchdachte Layout des Gehäuses Unterstützung für Grafikkarten bis zu 355 mm Länge oder 300 mm bei Verwendung eines 360-mmFrontradiators. Dadurch ist das North Momentum Edition die ideale Basis für leistungsstarke Gaming-Systeme.
Three-chamber design for maximum thermal performance Dedicated CPU cooling chamber Two airflow channels for efficient circulation in the main compartment Two curved French-door tempered glass panels Compatible with motherboards with reversed connectors RapidRoute 2.0 cable management system Three iCUE LINK LX-R RGB 120mm fans with reversed blades and system hub THREE IS BETTER THAN TWOTHREE-CHAMBER DESIGN The innovative three-chamber design isolates hot components, ensuring effective cooling and maximum performance under any condition. Separate chambers for the CPU, GPU/motherboard, and PSU, cables, and storage deliver exceptional thermals and simplify the building process. WORLD-CLASS ENGINEERINGUNMATCHED PERFORMANCE Engineered from the ground up by our world-class designers, the AIR 5400 case is a masterpiece of precision, performance, and thoughtful construction. BIG GRAPHICS CARDS WELCOMEOPTIMAL AIRFLOW TO THE GPU The spacious interior is designed to accommodate even the most powerful graphics cards. Two dedicated airflow channels direct cool air across the GPU, ensuring peak performance. UNLOCK THE VIEWiCUE LINK LX-R FANS WITH REVERSED BLADE Factory-installed iCUE LINK LX-R RGB 120mm fans with reversed blades at the bottom provide efficient, quiet cooling and uninterrupted RGB lighting. The included system hub supports up to 24 iCUE LINK devices, allowing you to power additional fans with just one cable. STUNNING VISUALSTWO CURVED FRENCH-STYLE GLASS DOORS Two glass panels meet at the corner and swing outward on hidden hinges for a seamless look and easy access to your components. ADVANCED CABLE MANAGEMENTRAPIDROUTE 2.0 RapidRoute 2.0 makes cable management effortless. The new motherboard tray with a perforated wall allows cable ties to be easily repositioned, keeping your build clean and organized. MULTIPLE COOLING OPTIONS The AIR 5400 comes with three 120mm intake fans with reversed blades at the bottom and offers seven times more space in the CPU chamber, top, and rear for highly efficient airflow throughout the case. MODERN FRONT I/O PANEL Provides easy access to ports, including a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 1 Type-A ports, and integrated 3.5mm audio and microphone jacks.
The Lian Li LANCOOL 216 RGB White E-ATX Case is a stylish mid-tower case designed for E-ATX motherboards. It features three radiator mounts for water cooling (1x 240mm / 2x 360mm), a tempered glass side panel, and comes with three pre-installed fans (2x 160mm ARGB / 1x 120mm). It also includes a fan and ARGB hub for easy customization and control.
MAG PANO 100R PZ / WHITE - Supported ATX and Micro-ATX Back-connect motherboard. - Supports 360 mm radiator on the top, side and bottom - 270-degree panoramic tempered glass. - Pre-installed with 3 x 120 mm ARGB Reverse-blade fan at the side and 1 x 120 mm ARGB fan at the rear. - 1-to-4 ARGB-Fan control board. - Synergize with a compatible MSI motherboard through bridging with a USB 20Gbps Type-C (20Gbps) port for high speed data transmission. - Removable dust filter at the top, side and bottom being easily removed for cleaning. - UNI front panel cable make your DIY process easier and create more possibilities to your system.
