Die North XL Momentum Edition ist eine neue, leistungsorientierte Version des ikonischen North-Gehäuses und ermöglicht verbesserte Kühlung direkt ab Werk. Das charakteristische offene Holzfront-Design und die fein gemusterte Mesh-Belüftung werden durch drei leistungsstarke Momentum-14-Lüfter mit LCP-Lamellen für einen leisen und effizienten Luftstrom ergänzt. Eine Front aus geschwärzter Eiche in Kombination mit dunklen Metallakzenten erzeugt eine stimmige, komplett schwarze Optik, die sich nahtlos in jedes Gaming-Setup einfügt. Im Innenraum bietet das geräumige und durchdachte Layout des Gehäuses Unterstützung für Grafikkarten bis zu 413 mm Länge oder bis zu 380 mm bei Verwendung eines 420-mm-Frontradiators. Dadurch ist das North XL Momentum Edition die ideale Basis für leistungsstarke Gaming-Systeme.
The FSP U530-BS comes with four high-density, sound-dampening side panels that significantly reduce ambient noise. Reinforced with 0.7 mm thick SPCC steel plates, it keeps noise levels to a minimum, so you can focus undisturbed on your work or gaming. The front fan is equipped with special fan covers that ensure targeted airflow and additional noise dampening. Thanks to the four pre-installed quiet 120 mm fans (three at the front and one at the rear), the case delivers outstanding cooling performance. Even with the most demanding components, the system stays cool and efficient. It supports radiators up to 360 mm and ensures your components are reliably cooled even under heavy load. The FSP U530-BS case offers enough space for high-performance graphics cards up to 375 mm in length and a CPU cooler height of up to 175 mm. An integrated graphics card support keeps even heavy components stable without wobbling. The spacious interior allows easy installation of EEB, E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards and provides ample room for a versatile system configuration. In addition to its excellent functionality, the U530-BS impresses with a minimalist and elegant design. It offers excellent air circulation, optimized by mesh dust filters and fan covers. With practical support for ATX power supplies and various drive sizes (3.5" and 2.5" SSD), this case can be perfectly adapted to your needs.
The Jonsbo D401 combines a modern, almost futuristic design with sharp lines and a showcase design that visually puts your hardware center stage. Aside from its design, the case also offers plenty of functionality: support for up to ten fans, two 360 mm radiators, and enormous space for powerful graphics cards. Modern mid-tower with showcase design that highlights your hardware Versatile radiator options provide strong cooling performance Sufficient space for large high-end components Subtle and futuristic look with glass and metal accents Flexible fan configuration for optimal airflow Modern design with panorama effect The case combines an exoskeleton design with two large glass panels for a clear view of the installed components. The 270-degree viewing angle ensures an open and premium presentation. At the same time, textured metal surfaces emphasize the elegant appearance. Optimized cooling for high-end systems With support for multiple fans and up to two 360 mm radiators, the D401 offers strong cooling capabilities. This makes it ideal for powerful gaming or workstation systems. The flexible layout enables efficient air and water cooling. High compatibility and flexibility The case supports ATX, Micro-ATX, and Mini-ITX motherboards as well as large graphics cards up to 439 mm in length. Powerful power supplies and CPU coolers also fit without issue. This makes it possible to build a custom and future-proof system.
The Thermaltake Midi Tower Retro 360 TG combines the distinctive style of classic designs with the performance and flexibility of modern PC technology. The eye-catching retro-look front panel gives the case a special look and makes it a stylish centerpiece of any setup. In the spacious interior, the midi tower case offers support for motherboards up to the ATX standard, creating ideal conditions for powerful gaming or workstation systems. The well thought-out design allows for clean installation and optimal use of the available space. The case also sets standards when it comes to cooling: up to twelve 120 mm fans can be installed, while there is space on the top for a powerful 360 mm AIO water cooling system. This means that even demanding hardware stays reliably cool and works efficiently. Additionally, the Retro 360 TG is compatible with the optional 6-inch LCD screen kit, which allows for custom displays of system data, animations or your own designs, adding a personal touch to the system. The Thermaltake Midi Tower Retro 360 TG is the perfect choice for anyone who wants to combine nostalgic design with modern performance and maximum expandability. Tower case type Color beige EAN 4711658548030 Manufacturer no. CA-11Q-00MQWN-00 Made in China Retro series Midi tower design Motherboard form factor ATX Material tempered glass, steel Window Kit Yes Internal dimensions plug-in card length maximum 400 mm Internal dimensions CPU cooler height maximum 170 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 180 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 7 pieces Front connections 1x audio, 1x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Front 1 x 120 mm fan pre-installed, another 120 mm fan can be installed, alternatively 2 x 140 mm fans can be installed Rear 1 x 120mm fan pre-installed Notes Top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed, power supply cover: 3 x 120 mm fans can be installed, side mainboard: 3 x 120 mm fans can be installed Water cooling possible Yes Water cooling possible Supported radiators Top: 120/140/240/280/360 mm, MB side: 120/240/360 mm, back: 120 mm. Rear connection of the mainboard No Accessories optional 6 inch LCD screen kit Volume 55 l Dimensions Width: 23.5 cm x Height: 47.9 cm x Depth/Length: 49.25 cm
A front panel adapter like the IB-HUB1419-i3 from ICY BOX offers convenience by placing important ports and connections directly within reach. You no longer have to search the back of your PC for USB ports—instead, everything you need is available right on the front. This accessibility not only saves time, but also helps protect the rear ports of your system. The IB-HUB1419-i3 brings a wide range of connection options directly to the front of your PC. It features USB Type-C ports (20 Gbit/s and 5 Gbit/s), USB Type-A ports (5 Gbit/s), and two card readers for SD and microSD cards. Create a comfortable workspace by combining multiple connection types in a hub that’s easy to access. The IB-HUB1419-i3 is equipped with a USB Type-E connector that can be integrated directly into the motherboard and enables data transfer speeds of up to 20 Gbit/s. The Type-E connector is designed to meet current and future hardware standards, making it a valuable addition for users who need fast and stable connectivity in their systems.
MC-QUANTUM ATX Gaming CaseThe MC-QUANTUM brings together interior spaciousness, advanced cooling and ARGB lighting. It includes 3 front 120mm fans with FDB bearings, 1 rear ARGB fan synchronized with the front LED strip and a tempered glass side panel that enhances the lighting and the interior of the equipment. Its structure allows installing up to 335 mm graphics cards, up to 170 mm heatsinks, up to 8 x 120 mm or 5 x 140 mm fans, plus up to 240 mm top liquid cooling with up to 31.5 mm RAM. In addition, it incorporates USB-C, USB 3.0, USB 2.0 and HD Audio. Front Mesh with ARGB LED strip Full side tempered glass 3x front 120 mm FDB fans + 1x ARGB 120 mm fan Advanced connectivity with USB-C PREMIUM DESIGN WITH TEMPERED GLASSCompatible with ATX, Micro-ATX and Mini-ITX motherboards, the MC-QUANTUM combines interior spaciousness, thermal performance and a gaming aesthetics that has been taken care of in every detail. Its full tempered glass side panel enhances lighting and system components, while providing a sturdy structure and convenient access to the interior.SYNCHRONIZABLE ARGB LIGHTINGBeyond its thermal performance, it incorporates a front ARGB LED strip with multiple preset lighting effects, synchronized with the pre-installed rear ARGB fan. Thanks to its compatibility with motherboards and ARGB controllers, the lighting can be synchronized with the rest of the components for a harmonious, immersive and fully customized visual ensemble.OPTIMIZED AIRFLOWThe MC-QUANTUM integrates a mesh front that favors a direct and efficient airflow inside the chassis. It incorporates 3 front 120mm fans with ultra-quiet high-performance FDB bearings and 1 rear 120mm ARGB fan, generating a constant and balanced airflow throughout the interior. This configuration improves heat dissipation and helps maintain a stable temperature even in demanding gaming configurations.MAXIMUM THERMAL PERFORMANCEPrepared for high performance equipment, it allows installing up to 8 120mm fans or up to 5 140mm fans, adapting to different cooling needs. In addition, it supports liquid cooling systems up to 240mm at the top.COMPATIBILITY WITH GAMING HARDWAREDesigned for powerful and versatile configurations, the MC-QUANTUM offers wide compatibility with high performance components: Graphics cards up to 335mm CPU coolers up to 170mm Up to 8x 120mm fans or 5x 140mm fans Liquid cooling up to 240mm on top (with RAM up to 31.5mm high) Compatible with ATX, MicroATX and Mini-ITX boards ADVANCED CONNECTIVITYIts top panel integrates USB-C, USB 3.0, USB 2.0 and HD Audio, offering modern and versatile connectivity for convenient use of peripherals, headphones, external memory and other essential devices.
MC-VECTOR MicroATX caseOptimized Airflow and integrated ARGB in a compact Micro-ATX form factor. The MC-VECTOR is designed for compact gaming configurations with excellent airflow and efficient cooling. It includes 4 120mm ARGB fans with FDB bearings, multiple preset lighting effects and ARGB cable for synchronization with compatible motherboards and ARGB controllers. Its mesh front panel optimizes system ventilation, while the tempered glass side panel allows to show the inside of the equipment. Its compact design allows the installation of graphics cards up to 282 mm, CPU coolers up to 163 mm, up to 8 120 mm fans and 120 mm liquid cooling systems. The case is compatible with ATX power supplies up to 157 mm in length. Compact Micro-ATX case with tempered glass 4x ARGB 120mm FDB 120mm fans included Airflow optimized with mesh front panel Next-Gen connectivity COMPACT DESIGN WITH TEMPERED GLASSThe MC-VECTOR is designed for Micro-ATX and Mini-ITX configurations, offering an ideal balance between compact size, performance and gaming aesthetics. Its tempered glass side panel allows to show the interior of the equipment and highlight the lighting of the components, also providing greater strength and easy access to the interior of the system.OPTIMIZED AIR FLOW WITH MESH FRONTThe mesh front panel allows efficient airflow into the case, improving overall system ventilation and helping to maintain stable temperatures during long sessions of use.ARGB LIGHTINGThe MC-VECTOR includes four 120mm ARGB fans with pre-installed FDB bearings, designed for efficient cooling, quiet operation and increased durability.The fans feature multiple preset lighting effects and have ARGB cable for synchronization with compatible motherboards or ARGB controllers, allowing the lighting to be integrated with the rest of the system.HIGH COOLING CAPACITYThe case incorporates 4 pre-installed 120mm ARGB fans, three on the front and one on the rear, and allows to install up to a total of 8 120mm fans, allowing to optimize the airflow according to the needs of each configuration.DUAL CHAMBER DESIGN AND CABLE MANAGEMENTThe MC-VECTOR incorporates a dual-chamber design that separates the main power supply components and cabling. This structure facilitates cleaner and more organized cable management, improves internal airflow and simplifies system assembly, while maintaining a tidy and visually appealing interior.COMPATIBILITY WITH GAMING HARDWAREWith a compact size and designed for efficient configurations, the MC-VECTOR supports: Graphics cards up to 282 mm CPU coolers up to 163 mm Up to 8x 120 mm fans 120 mm liquid cooling radiators ATX power supplies up to 157 mm NEXT-GEN CONNECTIVITYThe MC-VECTOR includes USB-C, USB 3.0, USB 2.0 and HD Audio ports, allowing you to easily connect peripherals, headphones, external memory and other devices quickly and conveniently.
The IPC SC-4100 is a case for Mini ITX Mainboards with a quadruple Hot-Swap rack for hard drives.One included 80mm fan, as well as an optional 40mm fan, cares for clean air and therefore for an impeccable cooling system.One Flex ATX or 1HU server power supply can be mounted. The slot opening is suitable for the mounting of a short flat graphic card. One 2.5" hard drive or one SSD can also be mounted. One lockable door completes this total package.KujutegurPüstikTüüpServerMaterjalTeras3,5" lahtrite arv4Emaplaadi toetatud kujuteguridMini-ITXToote värvMustAknagaEiPüstikmontaaž1UMaterjali paksus1 mmSisseehitatud kõlar(id)EiKaasas toiteplokkEiUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendEiAudioväljundEiMaksimaalne esiventilaatorite arv1Toetatud esiventilaatorite läbimõõt40 mmInstallitud tagaventilaatorid1x 80 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt80 mmToetatud kõvakettasuurused2.5,3.5"KäigultvahetusJahLED-indikaatoridJahLähtestusnuppJahLaius194 mmSügavus200 mmKõrgus270 mmKaal2,66 kgPakendi laius315 mmPakendi sügavus245 mmPakendi kõrgus237 mmPakendi kaal3,08 kgKogus aluse kohta4 tk
Tootja: AKYGA Tootegrupp: arvutikorpus arvutikorpuse tüüp: ATX Ümbrise tüüp (motherboard type): ATX, MicroATX, Flex ATX, MINI ITX Supported toiteploki standards: ATX external 3,5"sahtleid: 0 external 5,25"sahtleid: 1 external 5,25" väikseid sahtleid: 0 internal 2,5"sahtleid: 3 internal 3,5"sahtleid: 3 intenal 5,25"sahtleid: 1 paigaldatud toiteplokk(ies): Ei maksimum toiteplokke: 1 toiteploki võimsus: andmed puuduvad elektripesade pistikuid Serial ATA: andmed puuduvad ATX toiteploki ühenduspesa tüüp: andmed puuduvad +12V elektripesa tüüp: andmed puuduvad I/O Ühendusi: 1x stereo mini-jack (kõrvaklappide väljund), 1x stereo mini-jack (mikrofon input), 2x USB 3.0, 1x USB 2.0 ventilaatori kiiruse regulaator: Ei paigaldatud ventilaatoreid: 0 maksimaalne kogus of fans: 3 laius: 200 mm pikkus: 418 mm kõrgus: 412 mm pesade arv korpuses: 7 tk külje õhukanal: Jah tööriistavaba kokkupanek: Ei värv: must Lisaomadused: andmed puuduvad Lisainfo: Product Site
Internal 4x 2.5 "/ 3.5" (cross, drive rails), 6x 2.5 "or 3x 3.5", Front I / O 2x USB-A 3.0, 2x USB-A 2.0, 1x microphone, 1x headphones, PCI slots 10 (2x riser card), Fan (front) 2x 140mm, 1400rpm (blue illuminated) or 3x 120mm (optional), Fan (rear) 1x 140mm, 1400rpm (blue illuminated), Fan (top) 3x 140mm (optional), Fan (below) 2x 120mm (optional), Motherboard up to E-ATX, Power supply ATX, Power supply position below, CPU cooler up to max. 190mm height, Graphic cards up to max. 310mm (410mm without HDD cage), Color white, inside white Dimensions (WxHxD) 274x592x577mm, Volume 93.59l, Weight 18.90kg, Special features Cable management, dust filter, glass viewing window, CA-1I7-00F6WN-00
Dimensions: 212 x 465 x 398 mm (W x H x D) Material: steel, acrylic glass, plastic Weight: 5.8 kg Color: white, black Form factor: ATX, Micro-ATX, Mini-ITX Fan possible: 3x 120 mm (front) 1x 120 mm (rear) 2x 120/140 mm (cover) 2x 120 mm (bottom) 2x 120 mm (vertical bracket) Fan pre-installed: 1x 120 mm (front) 1x 120 mm (rear) Radiator mountings: 1x 240 mm (cover) 1x 240 mm (vertical bracket) Drives: 2x 3.5 / 2.5 inches (internal) 4x 2.5 inches (internal) Power supply (optional): standard ATX Expansion slots: 7 I / O panel: 1x USB 3.0 2x USB 2.0 1x per audio in / out 1x LED control button 1x power button 1x reset button Maximum graphics card length: 340 mm Maximum power supply length: 190 mm Maximum CPU cooler height: 163 mm
Cabinet Form Factor: Micro Torn Mainboard Form Factor1sisseehitatud Devices: LED Indicator Power Button Supported Mainboard Form Factor15.25-inch External Drivesahtleid: 12.5-inch Internal Drivesahtleid: 3 Maksimum Fans toetatud Quantity1(USB 3.0 (type A)) USB 2.0: 1(USB 2.0 (type A)) mikrofon-In: 1(3.5-mm minijack) Headphones: 1(3.5-mm minijack) Power seadme tüüp: toiteplokk Optional CPU Cooler Maksimum kõrgus140 mm Expansion Card Max pikkus: 290 mm kaasastarvikud180 mm Nominal kaal: 2.26 kg garantii Products Returnable1Box kaal Brutto (kg): 2.75 kg Retail Packaging Netokaal Carton1EAN Code: 42604556458981
