With the D32 series, Jonsbo targets anyone looking to build a space-saving setup. The D32 PRO PC case, unlike the D32 STD, is aimed at the high-end segment with special and practical features such as Back-Connect or an improved front I/O.Elegant and space-saving design for mATX motherboardsSeamless cable management with cutouts for back-connect motherboardsMesh side panel creates a discreet appearanceAmple space for cooling solutions allows installation of powerful hardwareThree dust filters protect your hardware from annoying dust particlesThe Jonsbo D32 PRO Mesh: Space-saving and discreet case for high-end hardwareWhether mid-range HTPC or high-end PC – builds of all types can comfortably fit in the D32 PRO Mesh from Jonsbo. In this minimal case, graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height can be accommodated. In back-connect mode, the maximum height of the CPU cooler is reduced by just under seven millimeters.Thus, adequate cooling for your hardware is ensured even with the compact design of the case. Combined with up to six 120-mm fans, or one 120-mm fan and four 140-mm fans, the fans also provide tremendous airflow inside the case.No cable clutter with Back-ConnectWith back-connect motherboards such as the BTF series from ASUS, the PROJECT ZERO series from MSI, or the Stealth series from GIGABYTE, the case in B-mode, with about six to seven millimeters more space required, is virtually free of visible cable clutter.Since most power and connection cables can be attached to the back of the motherboard, you save on cable management and still maintain a clean look inside your case.Powerful cooling in a small spaceTo ensure your high-performance hardware stays properly cooled in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120-mm fans for sufficient airflow, a large dual-tower CPU cooler, or even a 240-mm AiO that can be installed, your hardware remains cool even under load.Three dust filters on the front, top, and bottom ensure your hardware stays free from dust and dirt. This way, your temperatures remain at an optimal level and the service life of your hardware is extended.
Mini tower in white, supports up to 7 fans, space for a radiator up to 240mm, motherboards up to mATX, GPU up to 410mm, and CPU cooler up to 171mm in height, supports up to two drives, with a display at the bottom of the front panel The Jonsbo D200 mini case offers you maximum performance in minimal space. Thanks to its compact design, it fits effortlessly on any desk or in your living room without compromising on hardware compatibility. Perfect for anyone looking for a powerful gaming PC in a space-saving format. Black mini tower with panorama design Effective cooling performance thanks to seven fans and radiator up to 240mm Motherboards up to mATX Space for graphics cards up to 410mm and CPU coolers up to 171mm in height Small display on the front to show CPU system data Jonsbo D200: Compact Mini Tower with Tempered Glass on Side and Front The Jonsbo D200 is a mini tower that, despite its small size, offers enough space for powerful hardware. Whether high-end graphics cards or an AiO water cooling system – the possibilities are numerous. Extensive Cooling Options with Fans and Radiators To keep your hardware cool under any load, the Jonsbo D200 can accommodate up to seven fans simultaneously. The top supports three 120mm or two 140mm fans. Three 120mm fans can be installed on the power supply cover, while one additional 120mm fan can be fitted at the rear. An AiO water cooling system can also be easily installed if you prefer to cool your powerful hardware with water cooling. There is space on the top for a radiator up to 240mm. Installing Your Hardware The case provides enough room for powerful gaming hardware. It supports the installation of large graphics cards up to 410mm, so even the latest high-end GPUs from the RTX 5000 series can be installed. Motherboards up to the mATX format are supported. The CPU cooler should not exceed a height of 171mm. To store programs and games, a total of two drives can be installed. CPU Display on the Front The integrated display in the Jonsbo D200 shows you the current temperature of your CPU at all times – for maximum control.
Limited hololive edition, panorama glass with Suisei design, vertical GPU with PCIe 4.0 riser, powerful cooling, dual-chamber construction The HYTE Y70 Suisei Edition is a limited showcase case for fans of hololive V-Tuber Suisei and discerning PC enthusiasts. It combines the renowned Y70 design with exclusive Suisei graphics, high-quality materials, and maximum hardware compatibility. Limited Suisei Edition featuring Hoshimachi Suisei design and collector’s value Three-piece panoramic glass wonderfully displays hardware and graphics cards Vertical GPU mounting with PCIe 4.0 riser for a clean look and optimal presentation Dual-chamber interior separates hardware and cables for improved airflow Extensive cooling options for both air and water cooling, suitable even for high-end systems Limited design for hololive fans The Suisei Edition brings detailed character graphics and an elegant midnight blue design to the Y70 case. Gold accents and lettering highlight the nocturnal aesthetic. The panoramic glass makes the case a centerpiece of any desk or setup. Plenty of space for powerful hardware The Y70 supports motherboards up to E-ATX and can accommodate graphics cards up to 422 mm in length. With 4-slot GPU support, there is also room for especially large graphics cards. CPU coolers up to 180 mm and power supplies up to 235 mm fit easily inside the case. Strong cooling and thoughtful design Up to ten fans or multiple 360 mm radiators ensure efficient cooling. The dual-chamber design simplifies cable management and keeps the showcase area neat. Tool-less panels and modular mounts make assembly and maintenance especially convenient.
The LC Power 2004MB-V3 Tower Chassis is designed for users looking for a reliable and functional case that supports various components while maintaining efficient airflow. Crafted from both plastic and metal, this chassis provides durability and features a well-organized internal layout thanks to the integrated cable management system, making it easier to build and maintain a clean setup. With support for multiple motherboard formats including micro ATX and Mini-ITX, this chassis offers versatility for different builds.
The Akyga AK36BK housing is a product in the Micro ATX standard, which advantage is minimalism that allows you to complete a computer that occupies a small space both in the office or at home. Light and small in sized, the product has an aesthetic look. It supports motherboards in the following formats: Micro ATX, Flex ATX and Mini ATX. The housing allows mounting a graphics card up to 250 mm long and up to 3 additional fans supporting cooling. The product architecture is adapted to the installation of disks and drives in 3 internal bays. Two 3.5 "and one 2.5" or two 2.5 "and one 3.5". The front panel of the housing has two USB A ports, one in 2.0 standard and one in a much faster 3.0 version. Above them there are sockets for connecting a microphone and audio equipment.
The View 390 TG Mid-Tower case stands out with its striking design and improved visibility, thanks to a curved panel and a tempered glass panel, allowing users to showcase their system. The View 390 TG Mid-Tower case is designed for next-gen builds and supports both standard and hidden-connector motherboards from ASUS, MSI, and GIGABYTE. The View 390 TG comes with two 120mm PWM fans at the rear to ensure effective cooling performance. For optimal cooling, users can install a 360mm radiator on the right side of the View 390 TG Mid-Tower case. The rotatable PCI-E slots support both horizontal and vertical GPU mounting. An included GPU holder and riser cable bracket also help to support the GPU and prevent sagging. Maximize the visual effects of your View 390 TG Mid-Tower case by upgrading it with our LCD screen kit. For storage capacity, the View 390 TG Mid-Tower case offers maximum support for up to three 2.5-inch SSDs or two 3.5-inch HDDs. Two USB 3.0 ports, one USB 3.2 Gen 2 Type-C port, and one HD audio port are conveniently located on the top for direct access when needed.
Midi tower with three glass panels, GPUs up to 380 mm, CPU coolers up to 170 mm, motherboards up to E-ATX compatible, featuring back-connect designs With the Phanteks Evolv X2 Matrix, you can build a striking gaming system with ample space for modern high-end hardware. The case supports E-ATX motherboards, large graphics cards, and powerful cooling. Motherboards with back-connect features such as ASUS BTF and MSI Project Zero help keep the interior tidy. Three glass panels offer an unobstructed view of your setup. There is also a 900-LED pixel matrix at the base of the case. Spacious mid-tower: Perfect for modern hardware Compatible with back-connect boards: ASUS BTF & MSI Project Zero Vertical cooling: Space for up to seven 120 mm fans GPU compatibility: Graphics cards up to 380 mm in length Clean look: Three large glass panels to showcase your hardware Matrix with 900 LEDs: Fully customizable display & effects Phanteks Evolv Series X2: Showcase case for powerful hardware The interior fits motherboards from Mini-ITX to E-ATX and supports boards with back connectors. This keeps the inside neat and organized. Eight PCIe slots and 380 mm of space for your GPU make installing large graphics cards easy. A PC case that wants to be seen Three large exterior glass panels provide an unobstructed view of your components. Metal covers conceal fans and accessories, making your hardware look as if it is floating. The LED matrix display runs along the front and right side of the case floor, showing system information or animations. Whether temperature display, time, or custom texts – you can easily customize the screen to your style, making it a real highlight in your gaming setup. Powerful cooling with vertical airflow The case employs a vertical cooling design: cool fresh air enters from below and warm exhaust air exits at the top. Up to seven 120 mm fans can be installed, all hidden within the panels for a clean look. Powerful & quiet cooling options Bottom: three 120 mm fans Top: three 120 mm fans / radiator up to 360 mm Rear: one 120 mm fan With a CPU cooler height of up to 170 mm, large tower coolers are also possible. A 360 mm radiator will fit perfectly in the top panel for AiO users. NEXLINQ: Simple fan & lighting control The Evolv X2 Matrix is part of the NEXLINQ ecosystem. Fans, coolers, and RGB components connect via a hub and can be conveniently controlled through software. You can use automatic or custom fan curves and adjust lighting colors. Mid-tower supporting back-connect motherboards Additionally, motherboards from Mini-ITX up to E-ATX are supported – including back-connect models such as ASUS BTF, MSI Project Zero, and GIGABYTE Project STEALTH. This keeps the interior especially tidy. Modular I/O panel The I/O panel is located on the bottom side. This allows the case to fit perfectly with your desk and provides easy access to the ports.
Tootekood: DB330M WHITE +3FGTIN: 4711527001864Korpused
Darkflash DB330M computer case + 3 fans (white)The Darkflash DB330M is a small and stylish case designed for powerful configurations for office work and more. It is compatible with M-ATX and ITX motherboards and can accommodate graphics cards up to 305 mm in length. With its compact dimensions of 400 x 218 x 333 mm, it is perfect for places where space is at a premium, without compromising on functionality. The set also includes three ARGB fans.Effective coolingThe DB330M case is equipped with three ARGB fans, which not only provide optimal cooling, but also look great. Thanks to them, you can give your workstation an original, gaming character! In addition, numerous ventilation openings and vertical air channels guarantee optimal heat dissipation. Don't worry about your computer overheating! What's more, depending on your needs, the case can accommodate up to 5 fans or water cooling (240 mm at the top and 120 mm at the rear).Ample space for componentsDespite its compact dimensions, the DB330M offers space for a graphics card with a maximum length of 305 mm and CPU cooling up to 180 mm in height. It easily accommodates modern, high-performance components, making it the perfect choice for those building their first gaming and high-performance computers. But that's not all. The case offers four slots for graphics cards – you don't have to limit yourself to just one!Flexible drive installationThe case supports various SSD and HDD configurations – you can install one SSD and one HDD or two HDDs. This allows you to flexibly customize the system to your needs! Thanks to this, you don't have to worry about running out of space for your files.Several useful portsThe case offers one USB 2.0 port and one USB 3.0 port for fast data transfer. In addition, there is an audio jack socket for convenient connection of headphones or a microphone.Minimalist designThe DB330M case will not only allow you to build a powerful computer, but also decorate your workstation. It stands out with its minimalist, modern design with transparent panels. Combine it with RGB-backlit components for a unique visual effect! There are also numerous cable grommets to help you organize your cables. And if necessary, you can easily remove the left and right panels of the case – no additional tools are required. ManufacturerDarkflashModelDB330MCase typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardATX at the bottomInternal drive bays3.5'HDD x2, 2.5'SSD x1Expansion card slots4Max power supply length240 mmMax graphics card length305 mmMax CPU cooler height180 mmMax number of fans5Fan mounting optionsTop: 120 mm x2/140 mm x2; Rear: 120 mm x1; Bottom: 120 mm x2Water cooling mounting optionsTop 240 mm; Side 120 mmNumber of fans installedNo fans installedFan typeNo fans installedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x1, HD AudioMaterial0.8 mm SPCCColorBlackHeight400 mmWidth218 mmDepth333 mmWeight5.3 kg
The TR300 WS Mid-Tower Case is an ATX case with a front-mounted power supply for optimal space utilization, supporting AIO water cooling solutions up to 360 mm for maximum cooling performance. It accommodates up to eight 120 mm fans and supports a radiator up to 360 mm on the top, enabling flexible cooling solutions. The case supports Mini-ITX, Micro-ATX, and ATX motherboards; the power supply can be installed at four mounting points inside the case depending on the motherboard size. Maximize the visual impact of your TR300 WS Mid Tower Case by upgrading with our LCD Screen Kit. The 6-inch LCD display allows you to monitor real-time information and upload any images or GIFs for extra flair with the latest TT RGB Plus software. Removable dust filters help keep your system clean while providing optimal airflow. For maximum storage compatibility, the case supports up to two 3.5-inch HDDs and three 2.5-inch SSDs for flexible installation.
With the S25-W2 ARGB, powerful hardware is specifically showcased: ARGB lighting, a side panel made of tempered glass and pre-installed PWM fans create the basis for impressive setups. Support for 360 millimeter radiators, an external 5.25-inch installation bay and modern connections such as USB Type-C ensure high flexibility and contemporary features. The S25-W2 combines ARGB lighting with a side panel made of tempered glass to make the installed hardware optimally visible. Using the integrated 2-port ARGB controller, compatible LEDs can be easily controlled and individual lighting effects can be created, allowing the system to be visually adapted. A pre-installed 120 millimeter ARGB PWM fan on the back and a 120 millimeter PWM fan on the front ensure balanced air circulation. A total of up to seven fans can be installed. In addition, the housing supports the installation of a 360 millimeter radiator and thus also offers suitable cooling options for high-performance systems. With an external 5.25-inch bay on the front, the case offers a convenient expansion option for compatible drives or accessories. This means the system remains flexible and can continue to integrate classic components. The I/O panel is equipped with a USB Type-C port and two USB 3.0 ports and enables quick access to the latest peripheral devices. A magnetic dust filter on the top protects the system from dirt and can be easily removed for cleaning. This means that the installed hardware remains efficient and maintained in the long term. The S25-W2 offers installation options for up to two 3.5-inch or four 2.5-inch drives. Graphics cards with a length of up to 38 centimeters, CPU coolers with a height of up to 17.2 centimeters and power supplies with a length of up to 22 centimeters can be easily integrated. Tower case type Color black EAN 4044951045709 Made in China S25 series Midi tower design Motherboard form factor E-ATX Material tempered glass, steel Window Kit Yes Internal dimensions plug-in card length maximum 380 mm Internal dimensions CPU cooler height maximum 172 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 220 mm Drive bays 5.25 inch external Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Front 1 x 120mm PWM fan pre-installed Back 1 x 120 mm ARGB-PWM fan pre-installed Notes Magnetic dust filter: top, cable management system, quick-release fasteners, top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed Lighting Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Water cooling possible Supported radiators Top: 120/140/240/280/360 mm, back: 120 mm Rear connection of the mainboard No Note Install the 360mm radiator on either top or front Accessories available accessory set Volume 49 l Dimensions Width: 22 cm x Height: 48.8 cm x Depth/Length: 46 cm Weight 7.3kg
The latest generation NZXT H6 combines modern design, outstanding cooling performance and an exceptionally user-friendly design in a compact mid-tower format. With its seamless, curved tempered glass panorama, the case offers a clear view of the built-in hardware and impressively showcases powerful components. NZXT's new design language combines elegant aesthetics with functional improvements, making the H6 an ideal choice for demanding gaming and enthusiast systems. The sophisticated dual-chamber layout separates the power supply and cable management from the main system area, creating a tidy interior and optimizing air circulation. The angled air inlets ensure targeted airflow to the most important components and support efficient cooling even under high system load. The concept is complemented by large mesh elements, which ensure a maximum supply of fresh air. Despite its compact design, the NZXT H6 offers generous space for modern high-end hardware. It supports ATX, Micro-ATX and Mini-ITX motherboards as well as graphics cards with a length of up to 390 millimeters. In addition, up to ten 120 mm fans and radiators up to 360 millimeters can be integrated, meaning that both air and water-cooled systems can be easily implemented. For additional stability, the case has an integrated GPU holder that reliably supports even heavy graphics cards. At the same time, side panels that can be removed without tools, generous cable routing channels and pre-installed cable ties make it easier to set up the system cleanly and conveniently. The compatibility with modern back-connect mainboards also enables particularly tidy builds with almost invisible cabling. Tower case type Color black EAN 5056547209333 Manufacturer no. CC-H62FB-01 H6 series Midi tower design Motherboard form factor ATX Material steel, tempered glass Window Kit Yes Mesh front Yes Internal dimensions plug-in card length maximum 390 mm Internal dimensions CPU cooler height maximum 165 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 200 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Slots Slots Tool-free Yes Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. 1 x 120 mm fan can be installed on the back Notes Cable management: 90 mm, nylon dust filter: bottom, front right: 3 x 120 mm fans can be installed, top: 3 x 120 mm fans can be installed, 2 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed Water cooling possible Yes Water cooling possible Supported radiators Top: 360 mm (up to 400 mm), back: 120 mm Rear connection of the motherboard Yes Accessories available, user manual, mounting accessories Volume 55 l Dimensions Width: 29.2 cm x Height: 44.8 cm x Depth/Length: 42 cm Weight 7.5kg
The Grandia GD04 is an incredible product that combines years of SilverStone's expertise in SFF (Small form factor) and HTPC (Home Theater Personal Computer) chassis design. It has a beautifully proportioned exterior and powerful thermal capability that rivals the best tower chassis. From the front, the GD04 is shaped similarly to most home theater components, but the depth was reduced to a mere 323mm. This overall size of 21.5 liters in volume actually makes the case one liter smaller than SilverStone’s own Micro-ATX Sugo cases! Even though GD04’s diminutive size allows it to easily integrate into any home theater cabinet, it can still accommodate an impressive list of standard components such as 5.25” optical drive, two 3.5” hard drives, a 2.5” SSD, a standard ATX power supply, and two high-end graphics cards up to 11 inches. Cooling duty in the GD04 is handled by three filtered 120mm fans designed with the same positive air pressure as the Fortress FT01, this enables class-leading cooling efficiency, reduced dust buildup, and silent operation. To make installation simpler, there is even enough space for cable management to be easily accomplished without the need for short cabled or modular power supply. Coupled with the special attention given to the order of installation, any user can quickly assemble or upgrade the GD04 and devote more time to enjoying a personalized digital life with an HTPC.Format microATXMaximum graphics card lenght 279 mmMaximum CPU-Cooler Height 75 mmSpecial Featuress Luftöffnungen an der Oberseite and an der Seite, three 120-mm-Fan an den Seiten, Luftöffnung for ein Netzteil an der Unterseite, Vibrationsdämpfer for die Festplatten, ein Netzteil with einer Länge von up to180 mm einbaubarPower Supply SlotDesign ATXDrive Baysexternal 5,25 inches 1internal 3,5 inches 32,5 inches 2FansIncluded 3x 120 mmInstallable 2x 80 mmFront-SideSpecial Featuress Power- and Reset-button, Power-LEDPorts USB 3.0 2Audio 2Back-SideSlots Full-Size 4additional Full-Size 1Product dimensions 440 x
Elegant Midi-Tower by Jonsbo, understated design with brushed aluminum, for motherboards up to ATX size, 1x pre-installed 120mm fan, 2x USB 3.0 ports, silver
Tootekood: OBSERVATORY LITE MESHGTIN: 5999094003491Korpused
Mõõtmed: 190 x 440 x 400 mm (L x K x S) Kasti mõõtmed: 258 x 498 x 440 mm (L x K x S) Materjal: Teras, karastatud klaas, võrk, plastik Pakend: EPE vaht Kaal: u. 5,5 kg Värv: must Kujutegur: ATX, Micro-ATX, Mini-ITX Võimalikke fänne kokku: 3x 120 mm (ees) 2x 120 mm (katus) 1x 120 mm (taga) Eelinstallitud: 3x 120 mm (ees) ARGB LED 1x 120 mm (taga) ARGB LED Radiaatori kinnitus: 1x 280 mm (ees) Filter: katus, põhi Sõidupesad: 2x 3,5 / 2,5 "(sisemine) 3x 2,5 "(sisemine) PSU: 1x tavaline ATX (valikuline) Laienduspesad: 7 I / O-paneel: 2x USB 2.0 (sisemine ühendus) 1x USB 3.0 (sisemine ühendus) 1x heli sisse / välja RGB / lähtestamise lüliti GPU maksimaalne pikkus: 335 mm (AIO kasutamisel 310 mm) Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU pikkus: 180 mm
Internal 6x 2.5 "/3.5", 2x 2.5 ", 8x 2.5" /3.5 "(optional), 2x 2.5" (optional), Front I / O 1x USB-C 3.1 (20-pin Key-A header), 2x USB-A 3.0, 1x microphone, 1x headphones, PCI slots 9 (2x riser card), Fan (front) 2x 140mm, 1000rpm, 18.9dB (A) or 3x 140mm (optional), Fan (rear) 1x 140mm, 1000rpm, 18.9dB (A), Fan (top) 3x 140mm (optional), Fan (other) 2x 140mm (optional), Radiator sizes 120/140/240/280 / 360mm in front, 120/140/240/280/360 / 420mm above, 120/140/240 / 280mm below, 120mm in the back, Mainboard up to ATX (285mm wide), Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6") / E-ATX (12 "x11.2"), Power supply ATX (max. 250mm deep), PSU position below, CPU cooler max. 185mm height, Graphics cards max. 315mm (491mm without HDD cage without front fan, 467mm without HDD cage with front fan), Color black, inside black, Lighting without lighting, Dimensions (WxHxD) 240x475x541mm, Volume 61.67l, Weight 10.50kg, Enclosure type miditower, Special features Cable management, dust filter, integrated fan control, window made of glass, Note Mainboard and case manufacturers refer to different dimensions as E-ATX. Mainboards with E-ATX / SSI EEB dimensions of 305x330mm or 12 "x13" are not supported, w/o psu, FD-C-MES2A-03
Tootekood: M2 MINI GRAYGTIN: 8809213766343Korpused
Product kirjeldus: Zalman M2 mini - MT - mini ITX Product Type: System cabinet Form Factor: Mini Torn värv: Grey I/O Ühendusi: 1 x USB 3.0 1 x USB 3.1 Gen 2 Supported Motherboards: Mini-ITX System Cabinet Features: Acrylic side panel, vertikaalne graphic kaart orientation Power Device: No toiteplokk mõõtmed (WxDxH): 15 cm x 32.8 cm x 23.5 cm kaal: 2.8 kg
Fractal Design Pop Silent - Torn - ATX Product Type: System cabinet Form Factor: Torn Windowed Side Panel: Jah, tempered glass värv: must TG clear tint I/O Ühendusi: 2 x USB 3.0 Audio sisend Audio joon-out Supported Motherboards: ATX, Mini-ATX, Mini-ITX System Cabinet Features: kaabel management system, toetab 120 mm radiator in rear, PSU dust filters, toetab Kuni 280 mm radiator in front panel Power Device: No toiteplokk (ATX) mõõtmed (WxDxH): 21.5 cm x 47.35 cm x 45.4 cm kaal: 7.3 kg Manufacturer Warranty: 2-year garantii
The LC Power Classic 7040B is a mid-tower chassis designed for users seeking a reliable and functional solution for their desktop setup. It features a spacious interior capable of accommodating a variety of motherboard types including ATX, microATX, and Mini-ITX. The chassis incorporates side metal mesh ventilation and a vented side panel, ensuring efficient airflow for optimized cooling performance. With four internal bays and two front accessible bays, this chassis offers ample storage options while maintaining easy access for your devices. For connectivity, the front panel includes USB 3.2 Gen 1 and USB audio ports, allowing for quick connections to peripherals. With a maximum video card length of 360 mm and CPU cooler height of 145 mm, this chassis supports many components. The plastic and metal materials combine to offer a sturdy build that meets various user needs in a compact form factor.
