Korpused

Midi Tower| czarna| bez zasilacza| 1 x USB 3.0 1 x USB C 3.2 1 X USB 2.0| 442×280×445|

With a 270° panoramic view through seamless tempered glass panels on the front and side surfaces, the Lucid 05 impressively presents your components from almost every angle. The Lucid 05 has a total of 11 fan mounts, ensuring effective air circulation not only for the CPU and GPU, but also for the system and storage drives. The top compartment supports a 360mm water cooling radiator for efficient heat dissipation in high performance systems. With the recent introduction of the RTX 50 series, the Lucid 05 has been designed to support graphics cards up to 410mm in length. Tower case type Color black EAN 4710679818986 Manufacturer no. SST-LD05-B-ARG Midi tower design Motherboard form factor ATX Material steel, plastic, tempered glass Window Kit Yes Internal dimensions plug-in card length CPU cooler height Power supply form factor Power supply length 3.5 inch drive bays 2.5 inches Slots full size Front connections 2x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Front 2 x 80 mm fans can be installed Rear 1 x 120mm ARGB fan pre-installed Notes Integrated 8+8 port ARGB/PWM hub, power supply cover cover: 3 x 120 mm fans can be installed, motherboard compartment: 2 x 120 mm ARGB reverse fans pre-installed, cover: 3 x 120 mm fans can be installed, alternatively 2 x 120 mm fans can be installed Water cooling possible Yes Supported radiators Rear connection of the mainboard No Note When installing two 2.5" SSDs in this position, ensure that the connectors face backwards to avoid interference.[When mounting a 360mm radiator in this position, ensure that the inlet and outlet pipes face forward to avoid interference.[When mounting a 240mm radiator in this position, the distance to the graphics card is 281mm (inclusive). power connectors). Make sure to install the fans between the radiator and the motherboard tray to accommodate this limitation. Volume 46 l Dimensions Width: 22 cm x Height: 49.15 cm x Depth/Length: 42.76 cm

With the TRYX FLOVA F50, you can build your perfect gaming PC. The midi-tower combines a sleek, modern design with thoughtful airflow. Whether you're creating a gaming PC, a creator workstation, or a powerful all-rounder, the FLOVA F50 provides the ideal foundation. Quiet operation: Optimized cooling system ensures low noise levels Outstanding airflow: Special cross-flow fan concept for excellent cooling Ample space for hardware: Graphics cards up to 420 mm in length Radiator support: Up to 360 mm space for AiO water cooling Well-equipped I/O panel: USB-C 3.2 on the side TRYX FLOVA F50: Midi-tower with stylish design TRYX FLOVA F50 Pink front view The FLOVA F50 has a clean and understated look. The front and side elements feature a fabric finish, giving it a cozy and minimalist appearance while ensuring plenty of fresh air inside. This case fits seamlessly into your gaming room, office, or living room. Powerful airflow with clever air circulation TRYX FLOVA F50 interior with fans Inside, the TRYX Cross-Flow System (TCF) provides a strong supply of fresh air. The fans direct air at a 90-degree angle through the case, efficiently cooling your graphics card and CPU. At the same time, your gaming system stays pleasantly quiet—around 20 dB(A) at 1,100 rpm. This means you get strong cooling without having your PC constantly audible during every task. Plenty of space for modern high-end hardware You can install even large components in the FLOVA F50. Graphics cards up to 420 mm long fit easily. Air coolers can be up to 170 mm high. For water cooling, the FLOVA F50 supports radiators up to 360 mm. Ready for current motherboard generations Supports ATX motherboards Compatible with back-connect designs (BTF / Project Zero) Clean cable management Tool-free assembly in many areas Especially with motherboards featuring rear connectors, you benefit from a particularly tidy interior. Cables disappear from view, giving your build a much cleaner look. I/O panel with USB-C On the side, you'll find an I/O panel with USB-C 3.2, allowing you to easily connect fast external devices without having to reach to the back of your case. It's easily accessible and matches the sleek overall concept of the case. Ideal for gaming, creative work, and quiet setups TRYX FLOVA F50 Pink in a setup Whether you’re planning a quiet creator PC or a powerful gaming machine, the TRYX FLOVA F50 gives you a case that reliably dissipates your components’ heat without being overly loud. It’s the perfect choice if you value quiet operation, strong airflow, and a subtle yet high-quality design. It doesn’t seek attention but impresses with its thoughtful details.

Kompaktne keskmise torniga ATX-tüüpi arvuti, tiheda võrguga esipaneel; 3 x 120 mm ARGB ventilaatorit, tugi kuni 10 ventilaatorile; 360 mm vedelikjahutuse tugi ja alumised sisendpesad graafikakaardile; Graafikakaart kuni 430 mm, ...

The Jonsbo X400 combines a striking design with maximum cooling performance – ideal for high-end setups with modern back-connect motherboards. The mix of steel, tempered glass, and technical ABS ensures a robust case with showroom appeal. Supports ATX, M-ATX, and ITX – also with back-connect layout Up to 13 fans: 3 top, 3 side, 2 rear, 2 back, 3 bottom Dual radiator support up to 360 mm – e.g. for AiO & custom loop GPU up to 427 mm, CPU cooler up to 176 mm – maximum hardware freedom USB-C (Gen 2) + 2× USB-A & audio/mic on the front panel Maximum space for high-end hardware The X400 offers uncompromising space for large GPUs, tall air coolers, and power supplies up to 180 mm. Perfectly suited for builds with powerful hardware and modern cable management via back-connect motherboards. Massive cooling capacity With up to 13 fans, the case provides an enormous airflow foundation. In addition, two radiators up to 360 mm can be installed – ideal for push/pull configurations or dual AiO setups. Elegant design meets technology Reinforced ABS frame, tempered glass, and a functional I/O panel make the X400 an eye-catcher with well-thought-out features. Thanks to USB-C, you are also perfectly equipped for modern peripherals.

DarkFlash DS950 computer case with display (white) + 6 fansDo you dream of a PC that stands out from the crowd and attracts attention? Use the Darkflash DS950 computer case with display! The 270° panoramic design with two tempered glass panels allows you to showcase your components, and the 6-inch IPS screen adds an extra element of personalization – you can display system information or your own photos or videos on it. Give your configuration a unique character! What's more, the spacious interior measuring 450 × 222 × 465 mm can easily accommodate ATX, Micro-ATX, and ITX motherboards, as well as modern components, including graphics cards up to 400 mm long and CPU coolers up to 180 mm high. This allows you to easily build a powerful computer for gaming or work. The set also includes 6 fans.270° panoramic designThe case is equipped with two transparent tempered glass panels that provide a panoramic view of the interior. The vertical-profile-free design allows you to showcase your computer components in an interesting way – for example, a set of RGB-backlit fans or water cooling with a display. Create an original configuration and show everyone that you can also be creative when building a PC!Integrated IPS display – express yourselfA distinctive feature of this case version is the built-in 6-inch IPS screen with a resolution of 480 × 960. You can display your own content (in JPG, PNG, or MP4 formats) or selected system information, such as CPU and GPU temperatures. Express yourself and be sure that your PC is one of a kind! It's a great option for gamers, streamers, and more.Efficient ventilation and extensive cooling capabilitiesThe DS950 offers an extensive ventilation system based on dense meshes that are responsible for effectively dissipating heat from inside the case. What's more, the design allows for the installation of up to 9 fans or 240/280/360 mm water cooling in the upper part. This prevents the computer from overheating, even during intensive work.Space for powerful componentsCreate a configuration that perfectly suits your needs. The DS950 case allows for the installation of graphics cards up to 400 mm in length and CPU coolers up to 180 mm in height. There is also space for one SSD or two HDDs, allowing for flexible data storage configuration. Also noteworthy is its compatibility with ITX, M-ATX, and ATX motherboards. The spacious interior allows for easy installation and replacement of components, so you can easily build a powerful computer for gaming or work.Convenient access to ports and buttonsThe case is equipped with various connectors that are useful in everyday work. You have USB-A 2.0, USB-A 3.0, and USB-C 3.2 Gen 2 ports at your disposal, allowing you to transfer files at speeds of up to 10 Gbit/s. There is also an HD Audio jack, a reset button, and a power button.Quick panel removal and dust protectionThe DS950 is designed to provide convenient access to the interior and allow for easy upgrades. The side panels use a snap-fit quick-release mechanism that allows them to be removed efficiently without the use of tools, and additional hand-tightened screws increase the stability of the structure. The whole is complemented by magnetic dust filters, which limit the ingress of contaminants into the interior and make it easier to keep the components clean. ManufacturerDarkFlashModelDS950VCase typeMidi towerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardATXInternal drive baysSSD x1 / HDD x2Expansion card slots7Max power supply length200 mmMax graphics card length400 mmMax CPU cooler height180 mmMax number of fans9Fan mounting optionsTop: 120 mm x3 / 140 mm x2Side: 120 mm x2Rear: 120 mm x1Bottom: 120 mm x3Water cooling mounting optionsTop: 360 mm / 280 mm / 240 mmRear 120 mmNumber of installed fans6Fan type120 mmButtons and controlsPower, ResetConnectorsUSB-C 3.2 Gen 2 x1, USB-A 3.0 x1, USB-A 2.0 x1, HD AudioMaterial0.5 mm SPCCColorWhiteHeight465 mmWidth222 mmDepth450 mmWeightApprox. 6.5 kg

The Jonsbo D401 combines a modern, almost futuristic design with sharp lines and a showcase design that visually puts your hardware center stage. Aside from its design, the case also offers plenty of functionality: support for up to ten fans, two 360 mm radiators, and enormous space for powerful graphics cards. Modern mid-tower with showcase design that highlights your hardware Versatile radiator options provide strong cooling performance Sufficient space for large high-end components Subtle and futuristic look with glass and metal accents Flexible fan configuration for optimal airflow Modern design with panorama effect The case combines an exoskeleton design with two large glass panels for a clear view of the installed components. The 270-degree viewing angle ensures an open and premium presentation. At the same time, textured metal surfaces emphasize the elegant appearance. Optimized cooling for high-end systems With support for multiple fans and up to two 360 mm radiators, the D401 offers strong cooling capabilities. This makes it ideal for powerful gaming or workstation systems. The flexible layout enables efficient air and water cooling. High compatibility and flexibility The case supports ATX, Micro-ATX, and Mini-ITX motherboards as well as large graphics cards up to 439 mm in length. Powerful power supplies and CPU coolers also fit without issue. This makes it possible to build a custom and future-proof system.

Clear lines, strong cooling, uncompromising look: With the Steel Shark, Sharkoon presents a stylish two-chamber ATX case that combines modern design with a particularly tidy look. Tempered glass on the front and side, four pre-installed ARGB PWM fans as well as extensive cooling options and BTF support make the Steel Shark the ideal basis for powerful and visually impressive gaming systems. Thanks to the well-thought-out two-chamber design, the Steel Shark clearly separates hardware and power supply including cable management. This creates an extra tidy look in the main area, while cables, drives and power supply can be discreetly stored at the back. The front and side panels of the Steel Shark are made of tempered glass and provide a clear view of the built-in hardware and the integrated lighting. This makes the case perfect for users who want to present their system not only powerfully, but also visually impressively. The Steel Shark is equipped with four 120 mm ARGB PWM fans ex works. These not only ensure an effective airflow, but also skillfully showcase the system visually. A practical ARGB control and a PWM fan hub with five positions are included! A total of up to eleven fans can be installed in the Steel Shark. In addition, the housing supports the simultaneous installation of two radiators and is therefore also aimed at water cooling enthusiasts who want to cool their system particularly efficiently and quietly. In addition to classic ATX motherboards, the Steel Shark also supports models with a BTF design. The rear connection technology further optimizes cable management and further underlines the clean look of the system. The Steel Shark is also flexible when it comes to selecting powerful hardware: It supports graphics cards with a length of up to 424 mm, CPU coolers with a height of up to 168 mm and power supplies with a length of up to 244 mm. Tower case type Color black EAN 4044951044924 Made in China Midi tower design Motherboard form factor ATX Tempered glass material Window Kit Yes Internal dimensions Plug-in card length maximum 424 mm Internal dimensions CPU cooler height maximum 168 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 244 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Front 3 x 120 mm ARGB-PWM fans pre-installed Back 1 x 120 mm ARGB-PWM fan pre-installed Notes Cable management system, graphics card holder, top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed Lighting Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Water cooling possible Supported radiators Front: 360 mm, Top: 360/280 mm Rear connection of the motherboard Yes Note If the graphics card is longer than 270 mm, there may be conflicts when installing a radiator in the side Accessories available accessory set Volume 59 l Dimensions Width: 28.5 cm x Height: 45.2 cm x Depth/Length: 46 cm

With the TRYX FLOVA F50, you can build your perfect gaming PC. This mid-tower combines a calm, modern design with well-thought-out airflow. Whether it's a gaming PC, creator workstation, or powerful all-rounder, the FLOVA F50 gives you the right foundation. Quiet operation: Optimized cooling system ensures low noise levels Outstanding airflow: Special cross-flow fan concept for effective cooling Plenty of space for hardware: Graphics cards up to 420 mm in length Radiator support: Space for AiO liquid cooling radiators up to 360 mm Well-equipped I/O panel: USB-C 3.2 on the side TRYX FLOVA F50: Mid-tower with stylish design TRYX FLOVA F50 White front view The FLOVA F50 looks tidy and understated. The front and side panels feature a fabric finish. This gives it a homely, minimalist look while also providing enough fresh air inside. That means the case fits not only in your gaming room, but also in your office or living room. Powerful airflow with clever air routing TRYX FLOVA F50 interior Inside, the TRYX Cross-Flow System (TCF) ensures a strong supply of fresh air. The fans direct the airflow through the case at a 90-degree angle. This delivers fresh air directly to your graphics card and CPU. At the same time, your gaming system stays pleasantly quiet - at around 20 dB(A) at 1,100 rpm. So you get strong cooling without your PC being constantly audible during every task. Plenty of room for modern high-end hardware You can also install large components in the FLOVA F50. Graphics cards up to 420 mm long fit without issue. Air coolers can be up to 170 mm tall. For liquid cooling, the FLOVA F50 supports radiators up to 360 mm. Ready for current motherboard generations Supports ATX motherboards Compatible with back-connect designs (BTF / Project Zero) Clean cable management Tool-free installation in many areas Especially with motherboards featuring rear-side connectors, you benefit from an especially tidy interior. Cables disappear from view and your build looks much cleaner. I/O panel with USB-C On the side, you'll find an I/O panel with USB-C 3.2. This lets you connect fast external devices without having to reach around to the back of your case. It is easy to access and matches the case's clean overall concept. Ideal for gaming, creative work, and quiet setups TRYX FLOVA F50 White in a setup Whether you're planning a quiet creator PC or a powerful gaming machine, the TRYX FLOVA F50 gives you a case that reliably dissipates heat from your components without becoming excessively loud. It is the perfect choice for you if you value quiet operation, strong airflow, and a subtle, premium design. It does not demand attention - but impresses in the details.

The NZXT H6 RGB+ (2026) in the elegant all-black version combines modern design, powerful cooling and impressive RGB lighting in a case that was specially developed for demanding gamers and PC enthusiasts. The striking panoramic glass front with seamless corner glazing offers an impressive view of the installed hardware and makes every system a visual highlight on the desk. Thanks to the innovative dual-chamber layout, the power supply, drives and cables are neatly separated from the main system. This not only ensures a tidy look, but also improves the airflow within the case. The angled front fans direct fresh air specifically to the most important components and ensure efficient cooling of the processor and graphics card, even under high load. The H6 RGB+ is equipped with powerful RGB fans ex works, which ensure an optimal balance of cooling performance and impressive lighting effects. The integrated RGB control enables easy synchronization of the lighting and creates individual color accents that perfectly match your own setup. Generous mesh areas and support for numerous additional fans and large water cooling radiators offer maximum flexibility for powerful gaming and high-end systems. With support for ATX, Micro-ATX and Mini-ITX motherboards as well as enough space for modern high-end graphics cards and powerful CPU coolers, the case is ideal for current and future hardware generations. Thoughtful details such as side panels that can be removed without tools, an integrated cable management system and a GPU support make assembly easier and ensure a professional appearance. Tower case type Color black EAN 5056547209357 Manufacturer no. CC-H62FB-P1 H6 series Midi tower design Motherboard form factor ATX Material steel, tempered glass Window Kit Yes Mesh front Yes Internal dimensions plug-in card length maximum 390 mm Internal dimensions CPU cooler height maximum 165 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 200 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Slots Slots Tool-free Yes Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x F120mm RGB fan pre-installed Notes Cable management: 90 mm, Nylon dust filter: Bottom, Front Right: 1 x F360 mm RGB reverse fan pre-installed, Top: 3 x 120 mm fans can be installed, 2 x 140 mm fans can be installed, Bottom: 1 x F360 mm RGB reverse fan pre-installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: 360 mm (up to 400 mm), back: 120 mm Rear connection of the motherboard Yes Further information The H6 RGB+ comes with pre-installed RGB fans and Control Hub Lite. Accessories included User manual, mounting accessories, Control Hub Lite, 2 x F360 RGB reverse fans, 1 x F120 RGB fan Volume 55 l Dimensions Width: 29.2 cm x Height: 44.8 cm x Depth/Length: 42 cm Weight 9.3kg

The HYTE Y70 Touch Infinite GUNDAM WING is an exclusive, limited edition premium ATX case co-developed with Bandai Namco to celebrate the 30th anniversary of Mobile Suit Gundam Wing. The unique design combines the iconic aesthetic of Wing Gundam Zero with cutting-edge PC case technology, making each configuration a real eye-catcher in gaming, anime and enthusiast builds. The focus is on the integrated 14.9-inch 2.5K multi-touch display with IPS technology and a 60Hz refresh rate, which can be individually adjusted via HYTE Nexus. Exclusive Gundam Wing animations, high-quality UV prints and thematic design elements give the case a unique collector's edition character. Technically, the special edition is based on the powerful HYTE Y70 Touch Infinite Mid-Tower model with a dual-chamber layout and enormous cooling capacity. The case supports current high-end components, including E-ATX motherboards, vertical 4-socket GPUs up to 422 mm in length, and radiators up to 360 mm in length. The included PCIe 4.0 x16 riser cable ensures a sleek vertical display of the GPU and optimized airflow. With space for up to ten fans, extensive cable management features and a modern design with panoramic glass, the HYTE Y70 Touch Infinite GUNDAM WING is ideal for high-end gaming PCs, show builds and individual creator systems. The combination of performance-oriented design and iconic anime design makes this case a unique highlight for Gundam fans and PC enthusiasts alike.

Darkflash DS900WD ATX computer case (White) + 4 fansDarkflash DS900WD is an enclosure designed for users who want practical solutions. The tempered glass side panel and wooden front panel provide good visibility of components and give the whole case a distinct look. It allows the installation of motherboards in ATX (Advanced Technology eXtended, a standard motherboard format), M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format) formats, giving you great flexibility when building your computer. With a spacious design and multiple mounting options, it provides convenience in assembling the kit and good air circulation. The kit comes with 4 fans.Various cooling optionsThe DS900WD offers space to install 12 120 mm fans or 2 140 mm fans and water cooling at the top 360 mm or 240 mm, and at the front 240 mm. This allows you to build an effective cooling system for powerful configurations. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation. As standard, the chassis is equipped with 4 fans to promote air circulation right from installation.Thoughtful layout and ample spaceThe chassis will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. There are seven PCI-E (Peripheral Component Interconnect Express, an interface for expansion cards) slots, allowing the kit to be expanded with additional expansion cards. For storage media, space is provided for two HDDs (Hard Disk Drive, hard drive) or one SSD (Solid State Drive, solid state drive) and one HDD, so you won't run out of space for games and files.Built-in portsThe Darkflash DS900WD chassis is equipped with a set of the most commonly used ports that make everyday use of the computer easier. On the top panel you'll find one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), while 2 additional USB 2.0 ports are ideal for connecting a mouse, keyboard, headphones or other accessories. There is also an HD Audio (High Definition Audio, a high-quality audio connector) for convenient connection of headphones and a microphone.Refined detailsOn the right side of the case is a metal mesh that not only provides adequate ventilation, but also blocks larger dust particles from entering the case. What's more, the top and bottom mesh panels also protect your equipment from debris, and their magnetic design makes them easy to install and remove.Durable construction and stylish designThe body of the case is made of 0.5 mm SPCC (Steel, Plate, Cold Rolled, Commercial Quality - structural steel), which ensures high durability. The whole thing measures 470 x 218 x 454 mm and fits into standard under-desk spaces. The stylish design and the ability to illuminate the fans make the set look modern.Includedcomputer casefan x4user manual ManufacturerDarkflashModelDS900WD ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installed4Type of fansINF24T ARGBButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorWhiteHeight454 mmWidth218 mmDepth470 mm

Enables vertical GPU installation, including PCIe 5.0 riser cable, high-quality steel bracket, compatible with current Lian Li cases With the Lian Li Vertical GPU Mounting Kit, you can elegantly and securely mount your graphics card vertically inside your case. The set consists of a sturdy metal bracket and a high-quality PCIe riser cable. This way, your graphics card is perfectly showcased while remaining optimally ventilated. Vertical GPU installation: For a tidy, stylish system High-quality materials: Robust steel bracket ensures stability Includes PCIe riser cable: Secure and stable signal transmission Easy installation: Precisely designed for Lian Li O11 Dynamic, O11D XL, and O11 Air Mini Optimised cooling: More distance from the side panel for better airflow Vertical graphics card mounting for a clean look With this bracket, you position your graphics card vertically – perfect for visually enhancing your system. The elegant design ensures the GPU becomes the centrepiece of your setup, while simultaneously allowing better air circulation around the card. Precisely designed for Lian Li cases The mounting kit is tailor-made for the Lian Li cases O11 Dynamic, O11D XL, and O11 Air Mini. It can be easily attached to existing mounting points without requiring any additional modifications. Thanks to the sturdy steel construction, the bracket securely holds even heavy high-end graphics cards in place. This keeps your hardware protected, even during transport or frequent upgrades. Includes PCIe riser cable The supplied PCIe 5.0 riser cable reliably connects your vertically mounted graphics card to the motherboard. Made from high-quality materials, it ensures stable signal transmission and is designed for current GPUs with high bandwidth. Quick and straightforward installation Tool-free bracket insertion Matching cutouts and screw holes Mounted within minutes Installation is hassle-free: install the bracket, connect the riser cable, insert the graphics card – done. This allows you to quickly redesign and visually enhance your system without much effort. The Lian Li Vertical GPU Mounting Kit is the ideal solution to make your system cleaner, safer, and more visually appealing. Whether you own an existing O11 case or are starting a new project – with this kit, you showcase your graphics card in the best light.

Enables vertical GPU installation, including PCIe 5.0 riser cable, high-quality steel bracket, compatible with current Lian Li cases With the Lian Li Vertical GPU Mounting Kit, you can elegantly and securely mount your graphics card vertically inside your case. The set consists of a sturdy metal bracket and a high-quality PCIe riser cable. This way, your graphics card is perfectly showcased while remaining optimally ventilated. Vertical GPU Installation: For a tidy, stylish system High-Quality Materials: Robust steel bracket ensures stability Includes PCIe Riser Cable: Secure and stable signal transmission Easy Installation: Precisely fitted for Lian Li O11 Dynamic, O11D XL, and O11 Air Mini Optimised Cooling: More distance from the glass panel for better airflow Vertical Graphics Card Mounting for a Clean Look With this bracket, you position your graphics card vertically – perfect for visually enhancing your system. The elegant design ensures the GPU becomes the focal point of your setup while allowing better air circulation around the card. Precisely Fitted for Lian Li Cases The mounting kit is tailor-made for the Lian Li cases O11 Dynamic, O11D XL, and O11 Air Mini. It can be easily attached to the existing mounting points without the need for any additional modifications. Thanks to the sturdy steel construction, the bracket securely holds heavy high-end graphics cards in place. This keeps your hardware protected, even during transport or frequent upgrades. Includes PCIe Riser Cable The supplied PCIe 5.0 riser cable reliably connects your vertically mounted graphics card to the motherboard. Made from high-quality materials, it ensures stable signal transmission and is designed for current high-bandwidth GPUs. Quick and Easy Installation Tool-free bracket insertion Matching cutouts and screw holes Mounted in just a few minutes Installation is straightforward: insert the bracket, connect the riser cable, install the graphics card – done. This allows you to quickly redesign and visually enhance your system with minimal effort. The Lian Li Vertical GPU Mounting Kit is the ideal solution to make your system cleaner, safer, and more visually appealing. Whether you own an existing O11 case or are starting a new project – with this kit, you present your graphics card in the best light.

MC-VECTOR MicroATX caseOptimized Airflow and integrated ARGB in a compact Micro-ATX form factor. The MC-VECTOR is designed for compact gaming configurations with excellent airflow and efficient cooling. It includes 4 120mm ARGB fans with FDB bearings, multiple preset lighting effects and ARGB cable for synchronization with compatible motherboards and ARGB controllers. Its mesh front panel optimizes system ventilation, while the tempered glass side panel allows to show the inside of the equipment. Its compact design allows the installation of graphics cards up to 282 mm, CPU coolers up to 163 mm, up to 8 120 mm fans and 120 mm liquid cooling systems. The case is compatible with ATX power supplies up to 157 mm in length. Compact Micro-ATX case with tempered glass 4x ARGB 120mm FDB 120mm fans included Airflow optimized with mesh front panel Next-Gen connectivity COMPACT DESIGN WITH TEMPERED GLASSThe MC-VECTOR is designed for Micro-ATX and Mini-ITX configurations, offering an ideal balance between compact size, performance and gaming aesthetics. Its tempered glass side panel allows to show the interior of the equipment and highlight the lighting of the components, also providing greater strength and easy access to the interior of the system.OPTIMIZED AIR FLOW WITH MESH FRONTThe mesh front panel allows efficient airflow into the case, improving overall system ventilation and helping to maintain stable temperatures during long sessions of use.ARGB LIGHTINGThe MC-VECTOR includes four 120mm ARGB fans with pre-installed FDB bearings, designed for efficient cooling, quiet operation and increased durability.The fans feature multiple preset lighting effects and have ARGB cable for synchronization with compatible motherboards or ARGB controllers, allowing the lighting to be integrated with the rest of the system.HIGH COOLING CAPACITYThe case incorporates 4 pre-installed 120mm ARGB fans, three on the front and one on the rear, and allows to install up to a total of 8 120mm fans, allowing to optimize the airflow according to the needs of each configuration.DUAL CHAMBER DESIGN AND CABLE MANAGEMENTThe MC-VECTOR incorporates a dual-chamber design that separates the main power supply components and cabling. This structure facilitates cleaner and more organized cable management, improves internal airflow and simplifies system assembly, while maintaining a tidy and visually appealing interior.COMPATIBILITY WITH GAMING HARDWAREWith a compact size and designed for efficient configurations, the MC-VECTOR supports: Graphics cards up to 282 mm CPU coolers up to 163 mm Up to 8x 120 mm fans 120 mm liquid cooling radiators ATX power supplies up to 157 mm NEXT-GEN CONNECTIVITYThe MC-VECTOR includes USB-C, USB 3.0, USB 2.0 and HD Audio ports, allowing you to easily connect peripherals, headphones, external memory and other devices quickly and conveniently.

The FSP U660 is a powerful server and workstation case for professional systems with high storage and performance requirements. It was developed specifically for users who want to combine extensive storage capacity, powerful hardware and flexible configuration options in one housing. With space for up to 18 3.5-inch hard drives and additional mounting options for 2.5-inch SSDs, the U660 is ideal for storage servers, backup systems, high-performance workstations and data-intensive applications. The generously sized housing supports motherboards in EEB, E-ATX, ATX, Micro-ATX and Mini-ITX formats and thus offers a high level of flexibility when selecting components. Up to 420 mm of space is available for powerful graphics cards, while CPU coolers can reach a maximum height of 180 mm. With nine expansion slots and the option of vertically mounting a graphics card, the system can be individually adapted to different requirements. The FSP U660 also offers extensive cooling options. In addition to numerous positions for case fans, the case supports radiators up to 360 mm in size. This makes it also suitable for powerful processors and systems that operate under high continuous load. The well-thought-out interior design supports efficient airflow and makes it easier to build powerful hardware. The U660 combines its high storage capacity with a robust construction made of 0.8 mm thick SPCC steel. With dimensions of 450 × 258 × 568 mm and a weight of around 11.6 kg, the case offers enough space for extensive hardware configurations, but remains comparatively compact for a case of this configuration. Two USB 3.0 ports and one USB Type-C port are available on the front for modern peripheral devices. The U660 combines its high storage capacity with a robust construction made of 0.8 mm thick SPCC steel. With dimensions of 450 × 258 × 568 mm and a weight of around 11.6 kg, the case offers enough space for extensive hardware configurations, but remains comparatively compact for a case of this configuration. Two USB 3.0 ports and one USB Type-C port are available on the front for modern peripheral devices. Whether as a powerful storage server, backup system, media workstation or basis for sophisticated AI and rendering applications - the FSP U660 offers a versatile basis for professional systems. Big tower case type Color black EAN 4711498482594 Manufacturer no. POC0000310 Server tower design Mainboard form factor E-ATX, SSI-CEB, SSI-EEB Material 0.8mm SPCC Internal dimensions plug-in card length maximum 420 mm Internal dimensions CPU cooler height maximum 180 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 230 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 9 pieces Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Front 4 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed Rear 1 x 120 mm fan can be installed, alternatively 1 x 140 mm fan can be installed Notes Vertical mounting of a graphics card possible, side: 4 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed, 3 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed Water cooling possible. Supported radiators top: 360 mm Rear connection of the mainboard No Volume 66 l Dimensions Width: 25.8 cm x Height: 56.8 cm x Depth/Length: 45 cm Weight 11.6kg

The SilverStone RM4A 4U Rackmount Chassis sets new standards in flexibility for workstation and server configurations, offering support for everything from compact Mini-ITX boards to full-size SSI-EEB motherboards. With eight full-height expansion slots and a removable expansion card bracket, it's built to easily accommodate high-performance components - no sagging, no strain, just solid support for multi-GPU setups or demanding expansion needs. Excellent temperature control is the strength of the RM4A. The front panel offers space for a 360 mm radiator, enabling the use of highly efficient liquid cooling systems for CPUs or GPUs. Complemented by two 80 mm fans on the back, the case offers a consistent airflow to all important components, ensuring reliable cooling even under continuous load. Rack type, server enclosure Color black EAN 4710679819501 Manufacturer no. SST-RM4A Made in China Rack design Mainboard form factor ATX, E-ATX, µATX, Mini-ITX, SSI-CEB, SSI-EEB Material steel Internal dimensions Plug-in card length maximum 424 mm Internal dimensions CPU cooler height maximum 148 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 255 mm Internal dimensions height units 4 U Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 8 pieces Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Front 3 x 120 mm fans can be installed, or a 360 mm radiator 2 x 80 mm fans can be installed on the back Water cooling possible Yes Water cooling possible. Supported radiators front: 360 mm Rear connection of the mainboard No Volume 35 l Dimensions Width: 44 cm x Height: 17.6 cm x Depth/Length: 44.6 cm Weight 7.6kg

No. of drive bays: 6 Dimensions: 455 x 205 x 475 mm Weight: 5.27 Other features: - Side panel with window YES- Filter under the YES power supply- Filter on the upper panel YES- Filter on the front panel YES- Steel thickness: 0.7 mm- Space for PSU: 240 mm- Rubber flanges for cable entry holes- All herrings twisted in place of the broken ones- The radiator can not be installed on the front panel

Mini Tower - Mini-ITX 250 Watt - black - USB/Audio

SilverStone korpus SST-GD09B

Internal 4x 2.5 ", 3x 3.5" (cross, hard drive cage), Front I / O 2x USB-A 3.0, 1x headphone / microphone, PCI slots 4, Fan (front) 1x 120mm or 3x 120mm (optional) or 2x 140mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm front, 120 / 240mm top, 120mm rear, Mainboard to μATX, Supported Motherboards Mini-ITX (6.7 "x6.7") / μATX (9.6 "x9.6"), Power supply ATX (max 325mm deep without front radiator and without HDD cage), Power supply position below, CPU cooler up to max. 166mm height Graphic cards up to max. 346mm, Color black, inside black, Dimensions (WxHxD) 210x411x411mm, volume 35.47l, weight 5.72kg, Special features Cable management, dust filter, glass viewing window, MCB-NR400-KGNN-S00

Midi ATX Tower, 3x3.5&quot , 5x2.5&quot , 233x533x462mm, 7.86kg, SPCC, Black

Aerocool korpus CS-103 must mATX

Chassis INTER-TECH A-3411 Creek Gaming Tower, ATX, 1xUSB3.0, 2xUSB2.0, PSU optional, Window side panel, LED light on the front, integrated RGB LED, Black

Thermaltake korpus AH T600 must

No. of drive bays: 8 Weight: 8.23

DIMENSIONS : (D)420mm X (W)269.5mm X (H)380mm MOTHERBOARD : E-ATX (Max 280 mm wide)/ATX/ Micro-ATX/ Mini-ITX PSU : SFX/ SFX-L MATERIAL : Steel 4 mm Tempered Glass 2mm Aluminum (top and left panel) FAN SUPPORT : Top: 3x 120mm or 2x 140mm Side: 2x 120mm or 2x 140mm Bottom: 3x 120mm or 2x 140mm Rear: 1x 120mm RADIATOR SUPPORT : Top: 360mm or 280mm or 240mm radiator Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator GPU LENGTH CLEARANCE : 395mm CPU COOLER HEIGHT CLEARANCE : 170mm VGA Length : 370mm DRIVES : Right side 2 x 2.5″ SSD + back plate 2 x 3.5″ HDD (or SSD) EXPANSION SLOTS : 3 or 5 or 7 slots (depends on back panel) IO PORTS : 2 x USB 3.0, 1 x USB 3.1 TYPE-C, 1 x HD Audio, Power Button DUST FILTERS : 1 x Top, 1 x Bottom, 2 x Side

Kolink VOID WHITE

Product kirjeldus: MSI MAG Forge 100M - Torn - ATX Product Type: System cabinet Form Factor: Torn värv: must I/O Ühendusi: 2 x USB 3.2 Gen 1 1 x microphone 1 x kõrvaklapid Supported Motherboards: ATX, microATX, Mini-ITX System Cabinet Features: Supports 240 mm radiator in front panel, toetab 240 mm radiator in top, toetab 120 mm radiator in rear, tempered glass side panel, bottom dust filter, top magnetic dust filter, LED control button Power Device: No toiteplokk Specification Compliance: ATX mõõtmed (WxDxH): 21 cm x 42.1 cm x 49.9 cm kaal: 5.64 kg

Corsair korpus 7000D AIRFLOW Tempered Glass, valge Full-Tower ATX Case

Lian Li Lancool III

Thermaltake korpus Versa T26 ARGB | CA-1W1-00M1WN-01

Thermaltake korpus Divider 370 TG ARGB, CA-1S4-00M1WN-00, must

Fractal Design Meshify 2 Compact Clear Tempered Glass White

Fractal Design korpus Pop Air RGB TG Clear Tint, ATX, mATX, Mini ITX, valge

Geh Antec PerformanceOne P20CE Midi Tower schwarz retail

Inter-Tech korpus IP-40, Mini-ITX, 88887371, must

B-42, ATX, micro-ATX, 1x 5.25&quot , 3x 8.89 cm (3.5&quot ) , 2x 6.35 cm (2.5&quot ) , 2x USB 2.0, 425x200x420 mm

Geh Antec Gamer AX20 Midi Tower schwarz retail

GEMBIRD Computer office case Fornax 160

MASTERBOX 520 MESH BLACKOUT EDITION EMBRACING DARKNESS

Cougar Airface RGB (CGR-5ZD1W-AIR-RGB)