With the TRYX FLOVA F50, you can build your perfect gaming PC. This midi tower combines a calm, modern design with well-thought-out airflow. Whether it's a gaming PC, creator workstation, or powerful all-rounder, the FLOVA F50 gives you the right foundation. Quiet operation: Optimized cooling system ensures low noise levels Outstanding airflow: Special cross-flow fan concept for effective cooling Plenty of room for hardware: Graphics cards up to 420 mm long Radiator support: Space for AiO liquid coolers up to 360 mm Well-equipped I/O panel: USB-C 3.2 on the side TRYX FLOVA F50: Midi tower with stylish design TRYX FLOVA F50 Black front view The FLOVA F50 looks clean and understated. The front and side elements feature a fabric finish. This gives it a homely, minimalist look while also ensuring enough fresh air inside. That means the case fits not only in your gaming room, but also in your office or living room. Powerful airflow with clever air routing TRYX FLOVA F50 interior Inside, the TRYX Cross-Flow System (TCF) provides a strong supply of fresh air. The fans direct the air through the case at a 90-degree angle. This delivers fresh air directly to your graphics card and CPU. At the same time, your gaming system stays pleasantly quiet, at around 20 dB(A) at 1,100 rpm. So you get strong cooling without your PC being constantly audible during every task. Plenty of room for modern high-end hardware The FLOVA F50 can also accommodate large components. Graphics cards up to 420 mm long fit without problems. Air coolers can be up to 170 mm high. For liquid cooling, the FLOVA F50 supports radiators up to 360 mm. Ready for current motherboard generations Supports ATX motherboards Compatible with back-connect designs (BTF / Project Zero) Clean cable management Tool-free installation in many areas Especially with motherboards that have rear-side connectors, you benefit from a particularly tidy interior. Cables disappear from view and your build looks much cleaner. I/O panel with USB-C On the side, you'll find an I/O panel with USB-C 3.2. This lets you connect fast external devices without having to reach around to the back of your case. It is easy to access and fits the case's clean overall concept. Ideal for gaming, creative work, and quiet setups TRYX FLOVA F50 right side Whether you're planning a quiet creator PC or a powerful gaming machine, the TRYX FLOVA F50 gives you a case that reliably dissipates the heat from your components without becoming excessively loud. It is the perfect choice for you if you value quiet operation, strong airflow, and a subtle, high-quality design. It doesn't demand attention, but it impresses in the details.
The TR300 WS Mid-Tower Case is an ATX chassis with a front-mounted power supply for optimal space utilization, and supports AIO liquid coolers up to 360 mm for maximum cooling performance. It accommodates up to eight 120 mm fans and supports a radiator up to 360 mm on the top, offering flexible cooling solutions. The case supports Mini-ITX, Micro-ATX, and ATX motherboards; the power supply can be installed at four mounting points within the case, depending on the motherboard size. Maximize the visual effects of your TR300 WS Mid-Tower Case with an upgrade to our LCD screen kit. The 6-inch LCD display allows real-time monitoring and the upload of custom images or GIFs, adding extra flair with the latest TT RGB Plus software. Removable dust filters help keep your system clean while maintaining optimal airflow. For maximum storage compatibility, the case supports up to two 3.5-inch HDDs and three 2.5-inch SSDs for flexible installation.
With the Jonsbo TK-5, your gaming setup becomes a real eye-catcher. Thanks to the open design, you have a full view of your installed hardware. White mid tower with panoramic glass design Numerous fan and radiator mounts for effective cooling performance Motherboards up to ATX Space for graphics cards up to 460 mm and CPU coolers with a height of up to 180 mm Jonsbo TK-5: PC case with panoramic design The Jonsbo TK-5 mid tower offers the perfect balance between size and functionality. With ample space for high-performance hardware and efficient cooling, it is the ideal choice for gaming builds. Extensive cooling options with fans and radiators To keep your hardware cool under any load, up to ten fans can be installed in the Jonsbo TK-5 at the same time. The case offers space on the top and bottom for three 120 or 140 mm fans each. On the side, you can install three 120 mm fans, and one at the rear. An AiO liquid cooling system can also be installed without any problems if you prefer to cool your high-performance hardware with water cooling. There is space for a 360 mm water cooling system on the top and bottom. Installing your hardware The case offers enough space for powerful gaming hardware. It supports the installation of long graphics cards up to 460 mm. The CPU cooler should not exceed a height of 180 mm. A total of eight drives can be installed to store programs and games.
The HYTE Y70 Touch Infinite GUNDAM WING is an exclusive, limited edition premium ATX case co-developed with Bandai Namco to celebrate the 30th anniversary of Mobile Suit Gundam Wing. The unique design combines the iconic aesthetic of Wing Gundam Zero with cutting-edge PC case technology, making each configuration a real eye-catcher in gaming, anime and enthusiast builds. The focus is on the integrated 14.9-inch 2.5K multi-touch display with IPS technology and a 60Hz refresh rate, which can be individually adjusted via HYTE Nexus. Exclusive Gundam Wing animations, high-quality UV prints and thematic design elements give the case a unique collector's edition character. Technically, the special edition is based on the powerful HYTE Y70 Touch Infinite Mid-Tower model with a dual-chamber layout and enormous cooling capacity. The case supports current high-end components, including E-ATX motherboards, vertical 4-socket GPUs up to 422 mm in length, and radiators up to 360 mm in length. The included PCIe 4.0 x16 riser cable ensures a sleek vertical display of the GPU and optimized airflow. With space for up to ten fans, extensive cable management features and a modern design with panoramic glass, the HYTE Y70 Touch Infinite GUNDAM WING is ideal for high-end gaming PCs, show builds and individual creator systems. The combination of performance-oriented design and iconic anime design makes this case a unique highlight for Gundam fans and PC enthusiasts alike.
The SilverStone RM43-324-RS Rackmount Case is the perfect candidate for a mass storage solution in 4U rackmount format. With 24 hot-swap trays, you can expand or replace storage at any time - ideal for a flexible server or high-capacity workstation. Everyone has the dream of a powerful server or a powerful workstation. With this rackmount case from SilverStone you come one step closer to fulfillment: The RM43-324-RS offers a total of 24 hot-swap trays for HDDs and SSDs, a powerful cooling system, space for up to three 2-slot GPUs and large server and workstation motherboards. So that you never lose track of the 24 hard drives that can be installed, each individual tray is equipped with a status LED. This way you can immediately see whether one or more hard drives are refusing to work. There are also separate status LEDs for the network connection and the power status. A conventional mainboard is usually not sufficient for a workstation or server. This case therefore offers enough space for SSI-EEB, SSI-CEB and E-ATX mainboards. This allows you to integrate more RAM and additional storage media and exploit the full performance potential of your hardware. To ensure that your powerful hardware is adequately cooled, this case contains three industrial 120 mm fans with a thickness of a whopping 38 millimeters. Since these are also hot-swappable, you can replace them directly in the event of a defect. Rack type, server enclosure Color black/red EAN 4710679818566 Manufacturer no. SST-RM43-324-RS Made in China Rack design Mainboard form factor ATX, E-ATX, µATX, Mini-ITX, SSI-CEB, SSI-EEB Material aluminum, plastic, SPCC (steel): 1.0mm ~ 1.2mm Internal dimensions plug-in card length CPU cooler height Power supply form factor Height units 3.5 inch drive bays 2.5 inches Slots full size Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Rear 2 x 80mm fans pre-installed Notes Cable management, Internal: 3 x 120 x 38 mm hot-swappable PWM ball bearing fan pre-installed, Max supported weight: 80 kg Rear connection of the mainboard No Feature Supports 24 x 2.5"/3.5" SAS/SATA hard drives/SSD, hot swappable Further information Backplane: 24-port SAS / SATA to Mini SAS HD-SFF-8643 x 6 + SGPIO, Interface: SAS III / II / I, SATA III / II / I Volume 51 l Dimensions Width: 44.2 cm x Height: 17.5 cm x Depth/Length: 66 cm Weight 16.8kg
The SilverStone RM4A 4U Rackmount Chassis sets new standards in flexibility for workstation and server configurations, offering support for everything from compact Mini-ITX boards to full-size SSI-EEB motherboards. With eight full-height expansion slots and a removable expansion card bracket, it's built to easily accommodate high-performance components - no sagging, no strain, just solid support for multi-GPU setups or demanding expansion needs. Excellent temperature control is the strength of the RM4A. The front panel offers space for a 360 mm radiator, enabling the use of highly efficient liquid cooling systems for CPUs or GPUs. Complemented by two 80 mm fans on the back, the case offers a consistent airflow to all important components, ensuring reliable cooling even under continuous load. Rack type, server enclosure Color black EAN 4710679819501 Manufacturer no. SST-RM4A Made in China Rack design Mainboard form factor ATX, E-ATX, µATX, Mini-ITX, SSI-CEB, SSI-EEB Material steel Internal dimensions Plug-in card length maximum 424 mm Internal dimensions CPU cooler height maximum 148 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 255 mm Internal dimensions height units 4 U Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 8 pieces Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Front 3 x 120 mm fans can be installed, or a 360 mm radiator 2 x 80 mm fans can be installed on the back Water cooling possible Yes Water cooling possible. Supported radiators front: 360 mm Rear connection of the mainboard No Volume 35 l Dimensions Width: 44 cm x Height: 17.6 cm x Depth/Length: 44.6 cm Weight 7.6kg
With the Jonsbo TK-5, your gaming setup becomes a real eye-catcher. Thanks to the open design, you have a full view of your installed hardware. Black mid-tower with panoramic glass design Numerous fan and radiator mounts for effective cooling performance Supports motherboards up to ATX Space for graphics cards up to 460 mm and CPU coolers with a height of up to 180 mm Jonsbo TK-5: PC case with panoramic design The Jonsbo TK-5 mid-tower offers the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it is the ideal choice for gaming builds. Extensive cooling options with fans and radiators To keep your hardware cool under any load, up to ten fans can be installed in the Jonsbo TK-5 at the same time. The case provides space on the top and bottom for three 120 or 140 mm fans each. On the side, you can install three 120 mm fans, and one at the rear. An AiO liquid cooler can also be installed without any problems if you prefer to cool your powerful hardware with water cooling. There is space on the top and bottom for a 360 mm water cooling system. Installing your hardware The case offers enough space for powerful gaming hardware. It supports the installation of long graphics cards up to 460 mm. The CPU cooler should not exceed a height of 180 mm. A total of eight drives can be installed to store programs and games.
Our Silentware View A-RGB combines modern glass optics with ample space for high-end systems and impressive airflow, ensuring that your hardware is kept cool at all times. To achieve this, we have pre-installed three 120 mm reverse airflow fans and a conventional 120 mm case fan with A-RGB lighting and high-quality HDB bearings. The air intake on the front right of the Silentware View is slightly angled to direct the flow of fresh air to the graphics card and CPU cooler as quickly as possible, despite the glass front panel. The newly developed case body naturally has all the necessary cable grommets for systems based on ASUS BTF, MSI Project Zero and similar hardware, making it particularly future-proof. For systems with conventional cable routing, there are (partly rubberised) cable grommets for the motherboard, GPU, CPU and fan power supply, as well as ample space for cable management. With space for graphics cards up to 410 millimetres long and CPU coolers up to 160 millimetres high, the case is perfect for high-end hardware. Stylish showcase systems are therefore particularly easy to implement with the Silentware View. Ambitious buyers, on the other hand, have the option of implementing complex custom loop water cooling systems with up to 2x 360mm, 1x 280mm and 1x 120mm radiators. Type Tower case Colour: black EAN 4262483960127 Manufacturer no. VIEWBLACK Manufactured in China Series View Design Midi tower Mainboard form factor ATX Material Tempered glass, steel Window kit Yes Internal dimensions Maximum plug-in card length 410 mm Supported radiators Side: 120/240/280 mm, Top: 120/240/280/360 mm, Bottom: 120/240/280/360 mm, Rear: 120 mm Drive bays 3.5-inch internal 1 piece Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 1 (5 Gbit/s) Rear 1 x 120 mm ARGB fan with hydro bearing pre-installed Notes Side: 3 x 120 mm ARGB fans with hydro bearings pre-installed, Top: 3 x 120 mm fans can be installed, Bottom: 3 x 120 mm fans can be installed Lighting Yes, RGB RGB connections Addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Rear connection of the motherboard Yes Feature lighting can be controlled directly via the motherboard using a 3-pin A-RGB connector, while the speed can be regulated via a 4-pin connector using PWM and/or DC via the motherboard Further information The high-quality real glass front panel and side window made of tempered glass allow you to see inside your case so you can keep an eye on your stylish PC components at all times. The power supply chamber is located behind the motherboard tray. This is also where 2.5-inch SSDs and hard drives are installed. The visual focus of the build is therefore on the graphics card, motherboard and cooling. Volume 50 l Dimensions Width: 28.5 cm x Height: 41.5 cm x Depth/Length: 42.5 cm
Case Edition: V200 RGB Case Form Factor: Mid Tower Motherboard Form Factor: ATX, MicroATX, Mini-ITX Front/Side/Top Panel I/O: 1 x Headphone 1 x Mic In 2 x USB 2.0 1 x USB 3.0 Drive Bays: 3 x 2.5" Internal (Accessible) 2 x 3.5" Internal (Hidden) Standard Expansion Slots: 7 Fan Bays: 2 x 120/140mm 1 x 120mm 3 x 120mm / 2x 140mm Fans Included: 4 x 120mm w/ RGB LEDs Fan Controller/Hub: Built-in Fan Controller Liquid Cooling Support: Front Radiator 1 x 240/280mm Rear Radiator Compatibility 1 x 120mm Clearances: Max CPU Cooler Height 160 mm Max GPU Card Length 380 mm Window/s: Yes Window Configuration: 1 x Main Side Window Construction: Tempered Glass LED Lighting: Yes LED Lighting Emitters: Included LED Fan/s LED Lighting Colour: RGB LED Lighting Support & Control: Compatible with ASRock PolyChromeSync Compatible with ASUS AURA Sync Compatible with Gigabyte RGB Fusion Compatible with MSI Mystic Light Sync PSU Support: ATX PSU Mounting Location: Bottom Mount, Rear Max PSU Length: 170 mm Colour: Black Chassis Contruction Materials: SPCC Dimensions: 204 x 446 x 439 (WxHxD mm) Weight: 7.1 kg (Approx)
Internal 4x 2.5 ", 3x 3.5" (cross, hard drive cage), Front I / O 2x USB-A 3.0, 1x headphone / microphone, PCI slots 4, Fan (front) 1x 120mm or 3x 120mm (optional) or 2x 140mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm front, 120 / 240mm top, 120mm rear, Mainboard to μATX, Supported Motherboards Mini-ITX (6.7 "x6.7") / μATX (9.6 "x9.6"), Power supply ATX (max 325mm deep without front radiator and without HDD cage), Power supply position below, CPU cooler up to max. 166mm height Graphic cards up to max. 346mm, Color black, inside black, Dimensions (WxHxD) 210x411x411mm, volume 35.47l, weight 5.72kg, Special features Cable management, dust filter, glass viewing window, MCB-NR400-KGNN-S00
Unique Design & Powerful Heat Dissipation The AX90 features a unique mesh front panel design and excellent cooling performance. The full-view tempered glass side panel design allows you to show off your gaming configurations without any obstacles. 11 x 120mm fans can be installed simultaneously.
Optimized Airflow Design RGB Fusion with ARGB Connector Hub Support Motherboards up to E-ATX Up to 360mm Liquid Cooling Compatible Support Vertical GPU Installation Full-Size Tempered Glass Side Panel With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel Pre-installed 4 ARGB fans C301 GLASS CPU Height : 170mm GPU Length : 400mm PSU Length : 180mm, MidiTower PSU Not included, Front : 120mm x3 (ARGB); Rear : 120mm x1 (ARGB) Dimensions H=486 W=220 D=473 mm
MAG FORGE 112R TAKE THE BATTLEFIELD The MAG Series hardware, computers and components were born out of rigorous quality testing and are designed to stand for strength and durability. Our designers have focused on making the hardware as user-friendly as possible, so the MAG series products feature a simple installation process that, combined with a user-friendly interface, makes them the best choice for first-time gamers. ARGB LIGHT SHOW Create your own ARGB battle station with the MAG FORGE 110 series chassis, which is fully compatible with MSI Mystic Light technology. OPTIMISED AIRFLOW The MAG FORGE 110 series cases are optimised for, large and efficient airflow to cool the system. The MAG FORGE 110 series allows for the installation of up to 6 fans. Insta-Light Loop Button Quickly control the colours of the fan backlighting, the colours of the LED strip on the front panel of the case and the light animation effects with just one Insta-Light Loop button. Now you can easily browse through the profiles and choose your favourite case illumination. MAGNETIC DUST FILTER There is a magnetically mounted filter on the top vents to prevent dust from getting inside the case, yet it can be easily removed for cleaning. TOOL-FREE FASTENING SIDE PANEL The light grey shade of the 4mm side panel, made of tempered glass, is ideal for displaying RGB light effects. At the same time, it provides a very good view of the components inside the PC. The well-thought-out design of the MAG FORGE 112R case allows users to install and remove the tempered glass side panel very easily and safely. Simply place the side panel into the corresponding groove of the case base before installing it.
Atos ARGB Mini White Logic Atos is a chassis created to build an efficient and modern gaming PC. Optimal airflow, practical solutions and pre-installed ARGB fans make up its gaming character. READY FOR GAMES Logic Atos is a chassis created to build an efficient and modern gaming PC. Optimal airflow, practical solutions and pre-installed ARGB fans make up its gaming character. INDUSTRIAL STYLE The front panel designed in a confusingly similar industrial style not only fits well with a gaming PC, but also provides great airflow. TEMPERED GLASS As befits a gaming PC case, Logic Atos features tempered glass on the side Cases. It was intentionally limited to the side panel only, in favor of an airy front panel. 160 mm CPU COOLING Space for mounting an air cooler for a CPU with a maximum height of 160 mm is the optimal amount of space for high-performance cooling systems, especially for such a compact case. In addition, the ability to mount graphics cards up to 290 mm allows the installation of most high-performance components available on the market. OPTIMUM AIR SUPPLY The ventilated front panel provides airflow with two, efficiently operating 120mm fans. This allows you to effectively cool the installed components of the computer's interior, positively influencing the culture of their operation and service life. As an option, it is possible to mount two 140 millimeter fans on the front of Cases on your own, in place of the factory-installed ones. ARGB BEAUTY Case for gamers must look nice. That's why the pre-installed ARGB fans add beauty to the case and the gaming stand. The backlight color can be changed at will from the predefined settings using the RESET button on the control panel Cases. HOME & OFFICE Despite its gaming pedigree, Case will also perform well in office tasks and everyday work. The ability to build a versatile and powerful computer is undoubtedly its advantage. OPTIMAL AND PRACTICAL SOLUTIONS The mounting of HDD or SSD drives is obviously thought out here as well. Inside Cases at tunnel level there is a basket for 2 x 3.5" or 2.5" drives. On the motherboard tray, on the other hand, there is the possibility of mounting an additional 1 x 2.5'' drive (installation before mounting the motherboard). SIMPLE INSTALLATION Everything here is well thought out and intuitive. Building a computer in this case is a pleasure and is child's play. CONVENIENT ACCESS TO THE TOP PANEL Convenient access to the top panel, and there are two USB 2.0 and one USB 3.0 connectors, plus HD audio jacks for headphones and a microphone, a power button and a reset button (which allows control of ARGB backlighting). POWER SUPPLY IN THE TUNNEL The small holes under the PSU's mounting location serve a filtering function by restricting dust and dirt from entering Cases. At the same time, they provide air flow to the power supply. 4 PCIe expansion card slots Four slots for PCIe expansion cards. This is the optimal number for mounting, for example, a graphics card and a network card. IDEAL FOR ANY ROOM Supporting mini-ITX and Micro-ATX motherboards, it is a compact solution for building a computer for study, work and play. It takes up less space in the room than other standard Cases ATX motherboards, yet is highly functional.
Wall-mountable showcase case, ATX form factor, designed for custom water cooling, vertical GPU mounting, radiator up to 360 mm, graphics cards up to 400 mm in length.
The Ubiquiti OCD series is designed to streamline cabling in network environments, offering a reliable blank rack panel. This 2U blank panel provides a clean and professional appearance while effectively managing cabling solutions. Built with unshielded twisted pair (UTP) technology, it supports efficient installation and organization of cables, serving as a component in any structured cabling system.
XPG BATTLECRUISER II ST. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Frontventiler installeret: 3x 120 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 506 mm, Højde: 550 mm. Pakkebredde: 339 mm, Pakkedybde: 643 mm, Pakkehøjde: 615 mm
Der ToughArmor MB839SP-B ist ein robuster Wechselrahmen für eine 2,5” SATA Festplatte oder SSD (9,5 mm Bauhöhe). Durch die Verwendung eines herkömmlichen PCIe 2.0 Interfaces und eines flachen Designs, welches nur einen PCIe-Erweiterungsslot benötigt, erlaubt der MB839SP-B das Hinzufügen eines Hot Swap Schachtes für eine HDD oder SSD, auch wenn der Computer keinen freien SATA Anschluss oder Laufwerksschacht hat. Da der PCIe Anschluss sowohl Stromversorgung als auch Datenübertragung erlaubt, werden keine zusätzlichen Daten- oder Stromkabel benötigt. Darüber hinaus wird Hot Swap durch das Tray Design optimal unterstützt. Der MB839SP-B stellt über das PCIe 2.0/3.0 Interface volle Hot Swap Funktionalität zur Verfügung und erlaubt es in sekundenschnelle Laufwerke auszuwechseln, ohne das System herunterfahren oder das PC-Gehäuse öffnen zu müssen. Die Hot-Swap Unterstützung verhindert Downtimes, wenn man den Massenspeicher aufrüsten oder ein schadhaftes Laufwerk austauschen möchte. Ein auf Hot-Swap ausgelegter SATA-Anschluss für 10.000 Steckzyklen erlaubt das häufige und regelmäßige Wechseln von Laufwerken.
With the Icy Dock ToughArmor MB852M2PO-B, you can replace the old slim CD/DVD drive bay with 2x high-speed M.2 NVMe SSDs. It fits into the 9.5 mm ultra-slim internal mounting bay for optical drives (ODD) and features removable M.2 trays for quick access and effortless maintenance. It is a perfect storage solution for custom industrial PCs, rackmount servers, and embedded systems.TypeHot-swap frameColorblackEAN4713227445320Manufacturer No.MB852M2PO-BIntended useHot-swap frameUseDrive frameSuitable forSSD sizes: 2x M.2 PCIe NVMe SSD (2230/2242/2260/2280/22110)MaterialMetal, partly ABS plasticInstalled drives2x M.2Required mounting bays1x 5.25-inch slimExternal connections2x SFF-8612Internal connectionsM2Further information1x 15-pin SATA power connectorAccessories includedManual, screwsDimensionsWidth: 128.1 mm x Height: 9.5 mm x Depth/Length: 159.3 mmWeight263 g
