Cabinet Form Factor: Midi Torn Mainboard Form Factor1Supported Mainboard Form Factor: ATXMicro ATX 3.5-inch Internal Drivesahtleid12.5-inch Internal Drivesahtleid: 2 Expansion pesasi1(3.5-mm minijack x 2) Power seadme tüüp: toiteplokk Optional Power Device Location1Lisatarvikud: Screws Chassis Features1kg Pieces in pack: 1Box kaal Brutto (kg): 3.62 kg Retail Packaging Netokaal Carton1kg Packs in Box: 1EAN Code: 42604556436031
Kompaktes Thin-Mini-ITX-Gehäuse von Akasa, 1x 2,5-Zoll HDD/SSD, 2x USB 3.0 Typ A-Buchse, 2x USB 2.0 Typ A-Buchse, 2x 3,5-mm-Audio-Buchse, VESA-kompatibel
Internal 2x 2.5 "/3.5" (transverse, drive rails), 1x 2.5 "/3.5", 4x 2.5 ", Front I / O 2x USB-A 3.0, 1x microphone, 1x headphones, PCI slots 10 (3x riser card), Fan (front) 1x 140mm (RGB illuminated) or 3x 140mm (optional), Fan (rear) 1x 140mm (RGB illuminated), Fan (top) 2x 140mm (optional), Radiator sizes 120/240/280 / 360mm in front, 120 / 240mm above, 120mm in the back, Mainboard up to ATX (E-ATX with unknown dimensions possible), Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6") / E-ATX (unknown dimensions), Power supply ATX (max. 233mm deep), PSU position below, CPU cooler max. 180mm height, Graphics cards max. 387mm (without radiator), Color black, inside black, Lighting RGB header 3-pin ARGB (+ 5V / DATA / GND), integrated LED control, integrated RGB-LED lighting, illuminated fans, Dimensions (WxHxD) 230x502x491mm, Volume 56.69l, Enclosure type miditower, Special features Cable management, dust filter, graphics card holder, incl. Fan control, viewing window made of glass, Note Mainboard and case manufacturers refer to different dimensions as E-ATX. This manufacturer does not provide any information on supported E-ATX dimensions. Mainboards with E-ATX / SSI EEB dimensions of 305x330mm or 12 "x13" may not be supported, w/o psu, AEROPGSVISOR-G-BK-V1
Internal 2x 2.5 "/3.5" (transverse, hard disk cage), 2x 2.5 ", Front I / O 1x USB-A 3.0, 2x USB-A 2.0, 1x microphone, 1x headphone, PCI slots 4, Fan (front) 2x 140mm (optional), Fan (rear) 1x 120mm, 1000rpm, 16dB (A), Fan (top) 1x 200mm (optional) or 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 330mm, Color black, inside black, Lighting integrated LED control, integrated RGB LED lighting, Dimensions (WxHxD) 220x411x441mm, Volume 39.88l, Weight 6.10kg, Housing type mini tower, Special features dust filter, viewing window made of glass, CA-1Q9-00S1WN-00
The DistroCase™ 350P is a multi-functional and truly unique open frame mid tower chassis. The body of the case is constructed with its own water loop, a D5 pump, and 48 LEDs that are compatible with TT RGB PLUS, NeonMaker Light Editing, and Motherboard RGB Software. The DistroCase™ 350P Mid Tower Chassis is a fully modular chassis with a distro plate as the chassis' main body made with SPCC & PMMA. This multi-functional PC enclosure is incorporated with its own water channels, reservoir (about 800ml coolant), a preinstalled D5 pump, and multiple inlets and outlets. The 48 LEDs on the DistroCase™ 350P Mid Tower Chassis are TT RGB PLUS and NeonMaker Light Editing Software compatible. Other than that, users also have an option to control the lights by synchronizing the case with motherboards including ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. The DistroCase™ 350P Mid Tower Chassis provides users, gamers, and enthusiasts with an easier way to design their water loops for the ultimate user experience. 5mm Thick Tempered Glass Window with Stunning Viewing The DistroCase™ 350P features one 5mm thick tempered glass panel which is designed to meet the highest standards in the industry. The enlarged glass windows permit users to fully display every RGB component in the system, and show off their dedication and skill sets. Rotational PCI-E Slots Rotational PCI-E slots gives you the option to display your graphics card either vertically or horizontally, creating plenty of flexible space in your system. Thermaltake TT Premium PCI-E 3.0 Extender (Optional) – Supports a wide range of GPU solutions with ultra-excellent quality. Features like, extreme high-speed cable with highly-routable design, EMI shielding with conducting polymer are crafted for meeting the most demanding system. Available in 300mm, 600mm and 1000mm length. Expansion and Liquid-Cooling Solution The DistroCase™ 350P Mid Tower Chassis can support up to an ATX motherboard, a CPU cooler with a maximum height of 130mm, two-way VGA placement of up to 320mm (with reservoir & radiator installed), a power supply with a length of up to 200mm, and up to two 3.5” or six 2.5” HDDs. When it comes to the cooling solution, the water loop in this case is built differently from traditional PC cases. The DistroCase™ 350P Mid Tower Chassis is a fully modular designed chassis with a distro plate as the chassis' main body. This multi-functional PC enclosure is incorporated with its own water channels, reservoir, and multiple inlets and outlets. You can house up to a 280mm or 360mm radiator at the front and 360mm radiator on the side. DMD – Dismantlable Modular Design The DistroCase™ 350P enables user to freely build the system from the ground up with given modular panels, racks, brackets, and pre-design mounting arrays. No more unreachable screw corners or gaps and enjoys installation in a breeze with Dismantlable Modular Design. Technical Data Case Type: Mid Tower Dimension: 567 x 333 x 490mm (H x W x D) Net Weight: 17.78 kg / 39.2 lbs Side Panel: 1x 5mm Tempered Glass Color: Black Material: SPCC & PMMA Drive Bays: ACCESSIBLE: 2 x 2.5”,HIDDEN: 2 x 3.5" or 4 x 2.5" Expansion Slots: 6 Motherboards:: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) I/O Port: USB 3.0 x 2, USB 2.0 x 2, HD Audio x 1 PSU: Standard PS2 PSU (optional) Radiator Support Front: 1 x 360mm or 1 x 240mm or 1 x 120mm 1 x 280mm or 1 x 140mm Left Side: 1 x 360mm or 1 x 240mm or 1 x 120mm Clearance CPU cooler height limitation: 130mm VGA length limitation: 320mm (With Reservoir & Radiator) PSU length limitation: 200mm
Fractal Design Torrent - Torn - extended ATX Product Type: System cabinet Form Factor: Torn värv: valge I/O Ühendusi: 1 x USB 3.1 Gen 1 2 x USB 3.0 X audio sisend X audio joon-out Supported Motherboards: ATX, microATX, Extended ATX, SSI CEB, SSI EEB, ITX System Cabinet Features: Front dust filter, bottom dust filter, toetab Kuni 420 mm radiator in front panel, PSU shroud, tool-less side panels (push-to-lock), clear tint tempered glass side panel, toetab Kuni 420 mm radiator in bottom panel Power Device: No toiteplokk Specification Compliance: ATX mõõtmed (WxDxH): 24.2 cm x 54.4 cm x 53 cm kaal: 10.8 kg
Elegant midi-tower in white, side doors made of tempered glass, addressable RGB LED lighting, space for 2x 360 mm radiators, maximum 420 mm radiator, supports graphics cards up to 435 mm long, extensive water cooling support, and three pre-installed fans.
Product kirjeldus: RaidSonic ICY BOX IB-RP108 - case Product Type: Case Category: Enclosures Package Content: Screw driver, heatsinks, screws, 4 x footpad stickers, 40mm cooling fan Parameters: seinale kinnitatav Product Material: plastik, aluminium värv: Translucent, anthracite/must mõõtmed (WxDxH): 9.3 cm x 6.7 cm x 3 cm kaal: 85 g
MAG FORGE 112R TAKE THE BATTLEFIELD The MAG Series hardware, computers and components were born out of rigorous quality testing and are designed to stand for strength and durability. Our designers have focused on making the hardware as user-friendly as possible, so the MAG series products feature a simple installation process that, combined with a user-friendly interface, makes them the best choice for first-time gamers. ARGB LIGHT SHOW Create your own ARGB battle station with the MAG FORGE 110 series chassis, which is fully compatible with MSI Mystic Light technology. OPTIMISED AIRFLOW The MAG FORGE 110 series cases are optimised for, large and efficient airflow to cool the system. The MAG FORGE 110 series allows for the installation of up to 6 fans. Insta-Light Loop Button Quickly control the colours of the fan backlighting, the colours of the LED strip on the front panel of the case and the light animation effects with just one Insta-Light Loop button. Now you can easily browse through the profiles and choose your favourite case illumination. MAGNETIC DUST FILTER There is a magnetically mounted filter on the top vents to prevent dust from getting inside the case, yet it can be easily removed for cleaning. TOOL-FREE FASTENING SIDE PANEL The light grey shade of the 4mm side panel, made of tempered glass, is ideal for displaying RGB light effects. At the same time, it provides a very good view of the components inside the PC. The well-thought-out design of the MAG FORGE 112R case allows users to install and remove the tempered glass side panel very easily and safely. Simply place the side panel into the corresponding groove of the case base before installing it.
Tootekood: AIR 1000 PREMIUM BKGTIN: 4710562745689Korpused
Feature-rich mid-tower from Montech, for Mini-ITX / Micro-ATX / ATX motherboards, supports radiators up to 360 mm, tempered glass side panel with hinges, four pre-installed ARGB fans.
XPG INVADER X MID-TOWER CHASSIS INVADER X showcases your build's components and vibrant RGB lighting through bezel-less tempered glass panels. Its sleek design offers convenient visibility, while the magnetic dust filter ensures easy maintenance.
Tootekood: Z10 DUO WHITEGTIN: 8809213766121Korpused
Zalman Z10 DUO MID ATX Case with Tempered Glass and Full Mesh Front Panel - White The Zalman Z10 DUO ATX-Midi case combines modern design, exceptional functionality, and outstanding cooling performance. With its elegant white finish, a panoramic tempered glass side panel, and a mix of full mesh and tempered glass on the front, the Z10 DUO provides the perfect foundation for premium builds and high-performance gaming systems. Pre-installed are four Infinity Mirror ARGB fans that deliver stunning lighting effects. The included ARGB controller with 6 ports allows for easy lighting control and customization of your setup. All air filters can be effortlessly removed for cleaning thanks to a convenient sliding mechanism or magnetic holders. Whether as the centerpiece of your gaming rig or as a stylish case for your custom system, the Zalman Z10 DUO leaves nothing to be desired. Key Features of the Zalman Z10 DUO Case: Panoramic Tempered Glass Side Panel: Showcase your hardware with a clear view of the internal components—perfect for RGB lighting and high-end builds. Full Mesh Front Panel: Maximizes airflow and enhances cooling performance, ideal for demanding applications. Front Tempered Glass: Behind the glass panel, the pre-installed Zalman Infinity Mirror ARGB fans shine brilliantly. Spacious ATX Format: Compatible with ATX, Micro-ATX, and Mini-ITX motherboards, offering space for extensive high-end components. Coolers up to 173mm: The Z10 DUO supports air coolers with a height of up to 17.3cm! Optimized Cooling: Three pre-installed Zalman 120mm Infinity Mirror ARGB fans in the front and one 120mm ARGB fan in the rear ensure efficient heat dissipation. Elegant White Design: Timeless and modern, it fits seamlessly into any environment while giving your system a professional appearance. Additional Advantages: Support for water cooling systems and large GPU installations. Clean cable management with intelligent routing options. Space for multiple drives and SSDs to optimize storage options. The Zalman Z10 DUO in white is the ideal choice for PC enthusiasts, gamers, and system builders who value aesthetics, functionality, and quality. With its thoughtful interior layout and optimized cooling, the Z10 DUO is the perfect foundation for your stylish PC build. Discover it now and lay the groundwork for your ultimate gaming setup!
Stylish mid-tower in black, large mesh front, includes 4x 120-mm FRGB fans pre-installed, tempered glass side panel, graphics cards up to 345 mm & CPU coolers up to 158 mm
Versatile midi-tower, front and side panel made of tempered glass, large mesh areas on the left side panel and top, 2x 140mm & 1x 120mm ARGB PWM fans pre-installed, GPU length of up to 420mm, CPU cooler height up to 175mm
