The Lian Li DAN Cases A3-mATX Wood Edition in black combines modern design with an elegant walnut wood front panel. Thanks to excellent airflow through mesh panels, flexible configuration options, and space for high-end hardware, this case is the ideal choice for those seeking performance and style in a compact format. Perfect for demanding builds with a personal touch! Micro-ATX case by Lian Li in collaboration with DAN Cases Elegant front cover made from premium walnut wood and side panel of tempered glass Mesh panel on the top for excellent airflow Flexibly customizable: Let your imagination run wild Outstanding cooling thanks to space for 360 mm radiators Suitable for motherboards in Micro-ATX or Mini-ITX form factors Supports various power supplies from SFX to ATX A touch of luxury: The Lian Li DAN Cases A3-mATX Wood Edition in black If you're looking for a small form factor case for high-performance PC hardware, you should take a closer look at the Lian Li DAN Cases A3-mATX Wood Edition. This case combines a minimalist design with premium features: the elegant walnut wood front gives your setup an exclusive touch. With a capacity of about 26 liters, this Micro-ATX case is compact and space-saving. At the same time, the A3-mATX Wood Edition is perfect for high-end PC components, offering effective cooling despite its small size. With plenty of room for fans and radiators and generous ventilation openings, this mini tower easily meets the demands of powerful hardware. Flexibility meets performance: The fan and cooling options of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX Wood Edition offers space for up to 10 fans in the 120 mm format. These can be distributed as follows: three on the top, three on the side, three on the bottom, and one on the rear. Alternatively, two 140 mm fans can be mounted on both the top and side. With 25 mm thick fans on the case bottom, the GPU’s height is limited to 61 mm (3 slots). CPU air coolers can be up to 165 mm tall. Lian Li and Daniel Hansen also considered water cooling when developing the A3-mATX: A radiator can be installed in three locations inside the case: either a 360 mm (triple radiator) or 280 mm (dual radiator) on the top or the side. You must choose one of these two positions. The bottom of the case accommodates an additional 240 mm radiator. If you mount the fans below the radiator, you can even install a 360 mm radiator. Customizable configuration: The versatile possibilities of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX is suitable for a motherboard in Micro-ATX or Mini-ITX form factor. Unlike a Mini-ITX case, the PC case offers four expansion slots, allowing you to install a graphics card up to 4 slots tall and up to 415 mm long. You can install two 2.5-inch SSDs on a bracket. You can also install a 3.5-inch HDD or another 2.5-inch drive at the bottom of the case. You have the choice between an ATX, SFX-L, or SFX power supply, which you can mount flexibly at the front or side to create more space for your graphics card or the radiator—just as you prefer. In general, the smaller the power supply in the A3-mATX, the more room you have for the rest of your hardware. The I/O panel on the front of the Lian Li DAN Cases A3-mATX Wood Edition features two USB 3.0 Type A ports, one USB 3.1 Type C port, two 3.5 mm audio jacks (Mic-In/Audio-Out), and a power button. Note: The Lian Li DAN Cases A3-mATX Wood Edition offers numerous configuration options, but space inside this case is limited. The size and position of the power supply are crucial in selecting the right PC components. Therefore, we recommend careful planning using the manual in advance.
ATX-korpus • Esi- ja külgpaneel karastatud klaasist • Kahekordne kambristruktuur • Lihtne kaablite haldamine • Mahutab kuni 445 mm pikkuseid graafikakaarte
USB 3.0 x 2, Mic x1, Spk x1, White, Mini-Tower, Power supply included No Thermaltake Core V1 Side window, USB 3.0 x 2, Mic x1, Spk x1, White, Mini-ITX, CA-1B8-00S6WN-00
Tootekood: SST-TJ04B-E USB 3.0GTIN: 4710713968189Korpused
Introduced in 2004, the TJ04 has been a main stable of SilverStone’s prestigious Temjin series of tower chassis. Its excellent original design needed only a few minor tweaks and improvements over the years to keep up with the demands of modern PC hardware. An important equation in keeping the TJ04 a popular choice among system builders was its understated and classic styling. So in designing the TJ04-E (Evolution), SilverStone engineers kept the exterior styling largely unchanged while vastly improving the internals.The power supply is now bottom-mounted with the ability to accommodate up to four 5.25” drives, nine 3.5” hard drives and six SSDs, raising the bar significantly for storage capacity in a mid tower format. In addition to increased storage capacity, the TJ04-E can also install cards up to 17 inches without the need to remove any hard drive cage, a feat usually accomplished in full towers. To make sure the myriad of component can operate effectively, the TJ04-E includes a custom cooling solution to reduce hard drive temperatures and two custom cables with built-in capacitors to facilitate cable management and improve drive stability.To finish up TJ04-E’s already impressive layout efficiency, design details borrowed from other great SilverStone products such as positive pressure and quick removable filters will enable users to easily maintain consistently high performance for years to come. So it is possible that TJ04-E, like its predecessor, will again be able to outlast many generations of PC builds.- Positive pressure design for effective dust reduction- Support eight expansion slots and extra long graphic cards up to 17 inches- Classically styled 7mm thick aluminum front panel- Quick access and removal for fan filters- Smart backside cable routing design- Motherboard back plate opening for quick CPU cooler assembly- Support up to nine 3.5” hard drives and multiple 2.5” drive slots- Built-in innovative hard drive cooler- Includes two custom SATA cable for improved cable managementFormat AT
Cabinet Form Factor: Midi Torn Mainboard Form Factor13.5-inch Internal Drivesahtleid: 2 2.5-inch Internal Drivesahtleid1Audio Line-Out: 1Lisatarvikud: RGB LED Strip Chassis Features15 mm Nominal kaal: 6.26 kg garantii Term (month)1Box kaal Brutto (kg): 7.59 kg Retail Packaging Netokaal Carton1kg Retail Packaging Netokaal Plastic: 0.05 kg Packs in Box1EAN Code: 4260455641
Extrem kleiner digital adressierbarer RGB-LED-Controller von aqua computer, für bis zu 90 LEDs, inkl. 32 cm RGB-LED-Strips mit 15 LEDs, mit internem USB-Kabel
Umrüstkit für gängige Tower-Gehäuse, bestehend aus einem Riser-Kabel und einer PCI-Slot-Blende, für den vertikalen Einbau der Grafikkarte, nicht kompatibel mit Mini-ITX-Gehäusen
Kompaktes Mini-ITX-Gehäuse von Raijintek, aus eloxiertem Aluminium, Silber mit schwarzem Innenraum und Rückseite, Zwei Seitenteile aus Temperglas für tiefe Einblicke, für Mini-ITX-Mainboards und kleiner, 2x 2,5"- & 2x 2,5/3,5"-Slots, GPUs bis 28 cm & CPU-Kühler bis 13,5 cm
Tootjakoduleht: http://kolink.eu/Home/case-1/midi-tower-2/observatory-lite.html Mõõtmed: 190 x 440 x 400 mm (L x K x S) Kasti mõõtmed: 258 x 498 x 440 mm (L x K x S) Materjal: Teras, karastatud klaas, plastik Pakend: EPE vaht Kaal: umbes 5,5 kg Värv: must Kujutegur: ATX, Micro-ATX, Mini-ITX Võimalikke fänne kokku: 3x 120 mm (ees) 2x 120 mm (katus) 1x 120 mm (taga) Eelinstallitud: 3x 120 mm (ees) ARGB LED 1x 120 mm (taga) ARGB LED Radiaatori kinnitus: 1x 280 mm (ees) Filter: katus, põhi Sõidupesad: 2x 3,5 / 2,5 "(sisemine) 3x 2,5 "(sisemine) PSU: 1x tavaline ATX (valikuline) Laienduspesad: 7 I / O-paneel: 2x USB 2.0 (sisemine ühendus) 1x USB 3.0 (sisemine ühendus) 1x heli sisse / välja RGB / lähtestamise lüliti GPU maksimaalne pikkus: 335 mm (AIO kasutamisel 310 mm) Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU pikkus: 180 mm
Showcase-Gehäuse aus Aluminium von Jonsbo, Open-Frame-Design mit futuristischem Look, Seitenteile aus Tempered Glass, bis zu 6x 120-mm-Lüfter möglich, Platz für einen 360er-Radiator, Schwarz
Tootjainfo: http://kolink.eu/Home/case-1/midi-tower-2/inspire-k7.html Mõõtmed: 190 x 440 x 400 mm (L x K x S) Kasti mõõtmed: 242 x 481 x 437 mm (L x K x S) Materjal: Teras, karastatud klaas, võrk, plastik Kaal: umbes 5,0 kg Värv: must Kujutegur: ATX, Micro-ATX, Mini-ITX Võimalikke fänne kokku: 3x 120 mm (ees) 2x 120 mm (katus) 1x 120 mm (taga) Eelinstallitud: 1x 120 mm (tagumine) ARGB Radiaatori kinnitus: 1x 280 mm (ees) Filter: katus, põhi Sõidupesad: 2x 3,5 / 2,5 "(sisemine) 3x 2,5 "(sisemine) PSU: 1x standardne ATX (valikuline) Laienduspesad: 7 I / O-paneel: 2x USB 2.0 (sisemine ühendus) 1x USB 3.0 (sisemine ühendus) 1x heli sisse / välja RGB / lähtestamise lüliti GPU maksimaalne pikkus: 335 mm (AIO kasutamisel 310 mm) Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU pikkus: 180 mm
Showcase-Gehäuse für WaKü-Enthusiasten, für Mini-ITX/DTX-Mainboards, mit integrierter Distroplate aus Acryl, vertikale Installation von GPUs bis 300 mm, für 240 mm x 30 mm Radiatoren, 13x 2,5-Zoll- und 1x 3,5-Zoll-Festplatten, Seitenwände aus Aluminium
Kompaktes Mini-ITX-Gehäuse, viel Mesh für optimierten Airflow, Platz für 280er Radiatoren, 4-Slot-GPUs bis 336 mm, für ATX- oder SFX-Netzteile, bis zu sieben 2,5-Zoll-Laufwerke möglich
