DarkFlash DS900G computer case (white)The DarkFlash DS900G is a mid-tower case that offers extensive functionality for demanding users. It supports ATX, Micro-ATX, and ITX motherboards, and its interior allows for the installation of graphics cards up to 425 mm in length and CPU coolers up to 170 mm in height. The interior space has been designed for easy access to components and convenient expansion. The DS900G also offers full support for various cooling systems, making it easy to handle demanding gaming or work setups.Full interior exposureThe curved side panel made of transparent tempered glass allows a full view of the components installed inside. The slightly rounded surface of the glass creates a panoramic effect that sets the case apart from standard models and allows the lighting and aesthetics of the assembly to be fully exposed.Effective coolingThe case has been designed for optimal air circulation. It allows for the installation of up to 10 120 mm fans or a combination of 2 140 mm fans on the top panel. The design provides for 3 fans at the top, 3 on the side, 1 at the rear, and 3 at the bottom, allowing for a highly efficient cooling system. Additionally, water cooling up to 360 mm in length can be installed on the top panel, and up to 240 mm in length on the side.Optimized airflow and noise reductionThe DS900G case has densely spaced ventilation holes that not only improve airflow but also effectively trap larger dust particles. The rear panel is equipped with a steel mesh that improves cooling efficiency by up to 15% while reducing noise levels by approximately 10%.Magnetic dust filtersMagnetically attached dust filters are located at the top and bottom of the case. This makes them easy to remove and clean without having to disassemble other components. This type of solution facilitates daily computer maintenance and helps to maintain optimal operating conditions for the components.Various expansion optionsThe interior of the case has been designed for users who want to maintain aesthetics and order while having space for all the necessary components. The DS900G offers 7 PCIe slots, giving you the freedom to install long graphics cards and additional expansion cards. The mounting space has been designed to ensure adequate airflow, space for cable management, and quick access to the most important components.Flexible drive mounting optionsThe DarkFlash DS900G allows you to install 2 3.5" HDDs and 2 2.5" SSDs. Depending on your needs, various configurations are possible, such as two HDDs and one SSD, or one HDD and two SSDs. This allows each user to tailor the storage layout to their preferences and the specifics of their setup.Convenient access to ports and buttonsThe case offers a practical set of ports and buttons on the front panel. The user has at their disposal one USB 3.0 connector and two USB 2.0 ports, as well as an HD Audio connector. The front panel also features Power and Reset buttons and a button to control the backlight. ManufacturerDarkFlashModelDS900GCase typeMiddle TowerSide panelTempered glassMotherboard standardATX, Micro-ATX, ITXPower supply standardATXInternal drive bays2 × 3.5" (HDD)2 × 2.5" (SSD)Expansion card slots7 PCIe slotsMaximum graphics card length425 mmMaximum CPU cooler height170 mmMaximum number of fansUp to 10 120 mm fansAdditionally: 2 140 mm fans (top)Fan mounting optionsTop: 3 × 120 mm or 2 × 140 mmSide: 3 × 120 mmRear: 1 × 120 mmBottom: 3 × 120 mmWater cooling mounting optionsTop: up to 360 mm or 240 mmSide: up to 240 mmNumber of fans installedNo fans installedButtons and controlsPower, ResetConnectors1 × USB 3.02 × USB 2.01 × HD AudioMaterialSPCC 0.5 mmColorWhiteHeight454 mmWidth218 mmDepth434 mm
Tootekood: DB330M WHITE +3FGTIN: 4711527001864Korpused
Darkflash DB330M computer case + 3 fans (white)The Darkflash DB330M is a small and stylish case designed for powerful configurations for office work and more. It is compatible with M-ATX and ITX motherboards and can accommodate graphics cards up to 305 mm in length. With its compact dimensions of 400 x 218 x 333 mm, it is perfect for places where space is at a premium, without compromising on functionality. The set also includes three ARGB fans.Effective coolingThe DB330M case is equipped with three ARGB fans, which not only provide optimal cooling, but also look great. Thanks to them, you can give your workstation an original, gaming character! In addition, numerous ventilation openings and vertical air channels guarantee optimal heat dissipation. Don't worry about your computer overheating! What's more, depending on your needs, the case can accommodate up to 5 fans or water cooling (240 mm at the top and 120 mm at the rear).Ample space for componentsDespite its compact dimensions, the DB330M offers space for a graphics card with a maximum length of 305 mm and CPU cooling up to 180 mm in height. It easily accommodates modern, high-performance components, making it the perfect choice for those building their first gaming and high-performance computers. But that's not all. The case offers four slots for graphics cards – you don't have to limit yourself to just one!Flexible drive installationThe case supports various SSD and HDD configurations – you can install one SSD and one HDD or two HDDs. This allows you to flexibly customize the system to your needs! Thanks to this, you don't have to worry about running out of space for your files.Several useful portsThe case offers one USB 2.0 port and one USB 3.0 port for fast data transfer. In addition, there is an audio jack socket for convenient connection of headphones or a microphone.Minimalist designThe DB330M case will not only allow you to build a powerful computer, but also decorate your workstation. It stands out with its minimalist, modern design with transparent panels. Combine it with RGB-backlit components for a unique visual effect! There are also numerous cable grommets to help you organize your cables. And if necessary, you can easily remove the left and right panels of the case – no additional tools are required. ManufacturerDarkflashModelDB330MCase typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardATX at the bottomInternal drive bays3.5'HDD x2, 2.5'SSD x1Expansion card slots4Max power supply length240 mmMax graphics card length305 mmMax CPU cooler height180 mmMax number of fans5Fan mounting optionsTop: 120 mm x2/140 mm x2; Rear: 120 mm x1; Bottom: 120 mm x2Water cooling mounting optionsTop 240 mm; Side 120 mmNumber of fans installedNo fans installedFan typeNo fans installedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x1, HD AudioMaterial0.8 mm SPCCColorBlackHeight400 mmWidth218 mmDepth333 mmWeight5.3 kg
Striking, spacious PC case with glass front and side panel, plus stunning backlighting. The Krux Empero is perfect for anyone who values futuristic design as well as plenty of space for components and long radiators. With the Krux Empero case, you get not only a classic glass side panel, but also a fully glassed front. The tempered glass panels (side, front, and corner) are easy to remove without tools. The set includes four illuminated Krux 120 mm ARGB PWM fans with PWM speed control, which help maintain optimal operating temperatures while providing the entire unit with eye-catching lighting effects. Additionally, easily removable dust filters keep the interior free from dirt and debris. The included splitter for up to 6 fans not only controls fan operation and backlighting but also makes cable management easier. The Krux Empero PC case offers plenty of space for components, including full-size ATX motherboards (or smaller microATX and mini-ITX), GPUs up to 420 mm in length, tower CPU coolers up to 155 mm in height, power supplies up to 205 mm long, five storage drives, and AiO coolers with lengths of 120, 240, 280, and even 360 mm. The standard set of four 120 mm fans can be expanded to a total of ten fans. The I/O panel of the Krux Empero features a range of practical and functional ports. It includes a 3.5 mm combo audio jack (for headphones, speakers, and microphones), buttons to control power and LED backlighting, two standard USB-A ports, and a third, modern USB-C port.
DarkFlash DS950 computer case with display (white) + 6 fansDo you dream of a PC that stands out from the crowd and attracts attention? Use the Darkflash DS950 computer case with display! The 270° panoramic design with two tempered glass panels allows you to showcase your components, and the 6-inch IPS screen adds an extra element of personalization – you can display system information or your own photos or videos on it. Give your configuration a unique character! What's more, the spacious interior measuring 450 × 222 × 465 mm can easily accommodate ATX, Micro-ATX, and ITX motherboards, as well as modern components, including graphics cards up to 400 mm long and CPU coolers up to 180 mm high. This allows you to easily build a powerful computer for gaming or work. The set also includes 6 fans.270° panoramic designThe case is equipped with two transparent tempered glass panels that provide a panoramic view of the interior. The vertical-profile-free design allows you to showcase your computer components in an interesting way – for example, a set of RGB-backlit fans or water cooling with a display. Create an original configuration and show everyone that you can also be creative when building a PC!Integrated IPS display – express yourselfA distinctive feature of this case version is the built-in 6-inch IPS screen with a resolution of 480 × 960. You can display your own content (in JPG, PNG, or MP4 formats) or selected system information, such as CPU and GPU temperatures. Express yourself and be sure that your PC is one of a kind! It's a great option for gamers, streamers, and more.Efficient ventilation and extensive cooling capabilitiesThe DS950 offers an extensive ventilation system based on dense meshes that are responsible for effectively dissipating heat from inside the case. What's more, the design allows for the installation of up to 9 fans or 240/280/360 mm water cooling in the upper part. This prevents the computer from overheating, even during intensive work.Space for powerful componentsCreate a configuration that perfectly suits your needs. The DS950 case allows for the installation of graphics cards up to 400 mm in length and CPU coolers up to 180 mm in height. There is also space for one SSD or two HDDs, allowing for flexible data storage configuration. Also noteworthy is its compatibility with ITX, M-ATX, and ATX motherboards. The spacious interior allows for easy installation and replacement of components, so you can easily build a powerful computer for gaming or work.Convenient access to ports and buttonsThe case is equipped with various connectors that are useful in everyday work. You have USB-A 2.0, USB-A 3.0, and USB-C 3.2 Gen 2 ports at your disposal, allowing you to transfer files at speeds of up to 10 Gbit/s. There is also an HD Audio jack, a reset button, and a power button.Quick panel removal and dust protectionThe DS950 is designed to provide convenient access to the interior and allow for easy upgrades. The side panels use a snap-fit quick-release mechanism that allows them to be removed efficiently without the use of tools, and additional hand-tightened screws increase the stability of the structure. The whole is complemented by magnetic dust filters, which limit the ingress of contaminants into the interior and make it easier to keep the components clean. ManufacturerDarkFlashModelDS950VCase typeMidi towerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardATXInternal drive baysSSD x1 / HDD x2Expansion card slots7Max power supply length200 mmMax graphics card length400 mmMax CPU cooler height180 mmMax number of fans9Fan mounting optionsTop: 120 mm x3 / 140 mm x2Side: 120 mm x2Rear: 120 mm x1Bottom: 120 mm x3Water cooling mounting optionsTop: 360 mm / 280 mm / 240 mmRear 120 mmNumber of installed fans6Fan type120 mmButtons and controlsPower, ResetConnectorsUSB-C 3.2 Gen 2 x1, USB-A 3.0 x1, USB-A 2.0 x1, HD AudioMaterial0.5 mm SPCCColorWhiteHeight465 mmWidth222 mmDepth450 mmWeightApprox. 6.5 kg
Tootekood: LANCOOL 205 MESH C WHITEGTIN: 4718466012159Korpused
Midi-Tower in white, optimized for airflow with mesh inserts, for motherboards up to ATX form factor, three ARGB-PWM fans pre-installed, installation of 280mm radiators possible, removable dust filters included.
Das Chenbro RM24100-L ist ein robustes und ausbaubares Gehäuse für professionelle und platzsparende Server-Lösungen. Sein benutzerfreundliches Design bietet einfache Installationen. Mit seiner guten Belüftung bleibt es auf lange Zeit zuverlässig.
Der AeroCool P500C Evo setzt mit seinem nahtlos gebogenen Glaspanel, dem Zweikammer-Design und der lebendigen ARGB-Beleuchtung ein ästhetisches Statement. Er bietet Panoramablick und optimiertes Kabelmanagement für ein schlankes, übersichtliches Gehäuse. Ausgestattet mit vier 12-cm-ARGB-Lüftern mit beidseitiger Beleuchtung und Unterstützung für 360-mm-Flüssigkeitskühlung sorgt er für außergewöhnlichen Luftstrom und Kühlleistung. Mit 450 mm GPU-Freiraum, einem modernen Typ-C-Anschluss und einem 10-Port-ARGB-Hub unterstützt der P500C Evo High-End-Komponenten und ermöglicht mühelose Anpassungen für Gamer und Kreative. Das Gehäuse unterstützt ASUS- und MSI-m-ATX-Motherboards mit nach hinten gerichteten Anschlüssen, um Ihre Kabel zu verbergen und Ihrem System ein elegantes Aussehen zu verleihen. Das P500C Evo unterstützt bis zu zehn Lüfter und ermöglicht so eine optimale Kühlleistung. Die Lüftungsschlitze im Seitenteil sorgen für eine effiziente Luftzirkulation. Die Lüfter an der Unterseite sorgen für eine gezielte Kühlung Ihrer GPU.
The Viewport Mini in its elegant white version is a mini-tower case featuring front and side panels made of tempered glass, providing a panoramic view of the high-performance interior components. It supports Micro ATX and Mini-ITX motherboards and offers advanced cooling options with 7 fan slots and liquid cooling support for 240/280 mm and 120 mm radiators. The included ARGB fans draw air through mesh ventilation to optimize airflow. Ideal for gaming and high-performance applications, it accommodates GPUs up to 355 mm and CPU coolers up to 165 mm.
The 3U rackmount server case SST-RM31 is designed for demanding computing environments, combining high compatibility, flexible power supply options, and exceptionally strong cooling performance. It supports motherboards up to the SSI-EEB form factor, making it suitable for both standard ATX and E-ATX platforms as well as professional server boards. For power supply, the case offers a choice between two SFX-L power supplies or redundant 2U-CRPS units, making it ideal for mission-critical systems where high availability is crucial. Inside, there is ample space for up to eight full-height PCI expansion cards, allowing for extensive GPU, network, or storage configurations without compromise. For efficient cooling, the case supports 360 mm water cooling radiators, which can be operated with up to six 120 mm fans in a push-pull configuration. Alternatively, CPU air coolers up to 110 mm in height can be installed, allowing for classic cooling solutions without limitations. The case is rounded out by modern connectivity, including an integrated USB Type-C port on the front, providing quick access to current devices and storage media. Overall, this server case offers an ideal foundation for high-performance workstations, virtualization servers, storage-intensive applications, or compact compute clusters that require both expandability and maximum cooling performance.
Dieses 3U-Rackmount-Servergehäuse SST-RM31-MINI kombiniert hohe Flexibilität mit einer durchdachten, professionellen Konstruktion. Es unterstützt Mainboards bis zum SSI-CEB-Formfaktor und bietet damit genügend Raum für leistungsstarke Serverplattformen. Durch die Nutzung von SFX-L-Netzteilen lässt sich ein effizientes, platzsparendes Stromversorgungskonzept umsetzen. Mit insgesamt acht vollwertigen PCI-Erweiterungssteckplätzen ist das Gehäuse ideal für vielfältige Anwendungen wie RAID-Controller, Netzwerkkarten oder GPU-Beschleuniger. Für optimale Kühlleistung sorgt die Unterstützung von 360-mm-Wasserkühlungsradiatoren, während gleichzeitig CPU-Luftkühler mit einer Höhe von bis zu 110 mm eingesetzt werden können. Eine moderne USB-Type-C-Schnittstelle an der Gehäusefront rundet das Design ab und ermöglicht schnellen Zugriff auf aktuelle Geräte und Speichermedien. Dieses Rackmount-Gehäuse eignet sich perfekt für professionelle Serverumgebungen, High-Performance-Workstations und anspruchsvolle Dauerlast-Szenarien, in denen Zuverlässigkeit und effiziente Kühlung entscheidend sind.
Das APNX V2-F ist ein Premium-PC-Gehäuse, das für hervorragende Kühlung, elegante Ästhetik und Flexibilität entwickelt wurde. Seine drei abnehmbaren Hartglasplatten bieten einen rahmenlosen Panoramablick, während das X-Pand Flow Design die gesamte Luftströmungsdynamik erheblich verbessert. Mit Unterstützung für bis zu 13 Lüfter, 360-mm-Kühler und zwei 16-cm-Lüfter an der Unterseite sorgt es für eine erstklassige Wärmeleistung. Das V2-F unterstützt gängige Mainboards mit Reverse-Anschluss für ein übersichtlicheres Kabelmanagement. Funktionen wie eine GPU-Halterung, eine abnehmbare Mainboard-Kabelabdeckung und ein austauschbares PSU/HDD-Fach verbessern die Haltbarkeit und Anpassungsmöglichkeiten. Mit vertikaler oder horizontaler 360-mm-AIO-Montage und Unterstützung für den APNX 10-Port-Lüfter-Hub bietet das APNX V2-F eine effiziente Kühlung und mühelose Anpassungsmöglichkeiten für Hochleistungs-Builds.
Black case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Room for graphics cards up to 460 mm and CPUs up to 170 mm in height Installation of up to nine SSDs enables extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that convinces not only with its wide range of hardware possibilities, but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to receive true admiration. With the LUCA L70, you’re perfectly equipped to assemble your gaming PC exactly as you wish. This midi-tower offers more than enough space to keep your hardware cool, and is also extremely easy to take apart and put back together. Building your high-end setup has never been so easy! Comprehensive cooling options for your new build When building your own PC, cooling is one of the most important factors to consider. The LUCA L70 allows the installation of up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that with this combination, the power supply unit must be mounted on the top of the case. If you prefer mounting the PSU on the bottom, three fans can be installed on the top and only one on the bottom. Water cooling enthusiasts will also not be disappointed: radiators up to 420 mm can be installed in several locations. If the power supply is on the top, only a 240 mm radiator is possible there and a maximum 360 mm radiator on the bottom. If you mount the PSU at the bottom, there is room for a 420 mm radiator on the top as well as on the side. To prevent unnecessary dust buildup inside the case, there are dust filters on the top and bottom. This ensures a much longer lifespan for your hardware and saves you time and annoying cleaning. Thanks to the many options for installing fans and radiators, effective cooling is ensured so your high-end hardware always performs at its peak. In addition, the tower stands 4 mm above the ground on X-shaped legs, which further improves airflow. Case for powerful hardware So you can play even the most demanding games smoothly at high settings, the LUCA L70 accommodates a high-performance graphics card up to 460 mm in length. An included GPU bracket ensures it’s not subject to gravity. Vertical GPU installation is also possible—appropriate accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX with a width of up to 280 mm. To avoid cable clutter, it also supports motherboards with back-facing connectors when the PSU is on top, but only in ATX or micro-ATX format. The CPU height must not exceed 170 mm, and the power supply should be no longer than 190 mm. For plenty of storage for your programs and games, you can attach up to nine 2.5-inch drives to the side of the LUCA L70. Tool-free assembly and disassembly To make installing and swapping hardware as easy as possible, the LUCA L70 is fully modular. The front, side, and other parts can be taken apart and reassembled without any additional tools, plus the motherboard tray can be moved so you can install the motherboard, CPU, and CPU cooler independently.
Стильно и эффективно защитите ваш Raspberry Pi 5 с этим высококачественным алюминиевым корпусом в элегантном черном цвете. Прецизионно изготовленный корпус сочетает современный дизайн с превосходной функциональностью, обеспечивая оптимальное охлаждение и защиту вашего мини-компьютера.
Chenbro bietet mit dem RM14300 ein nur 41cm tiefes und sehr hochwertiges 19" Gehäuse mit 1HE, welches für den Einsatz mit mini ITX und micro ATX Mainboards geeignet ist. Das Gehäuse lässt sich auch um 180 Grad gedreht einbauen, so dass die normalerweise rückwärtigen Ports des Mainboards frontseitig erreichbar sind. Neben dem Mainboard können intern im Gehäuse noch bis zu 2 x 3,5" HDDs und 2 x 2,5" HDDs/SSDs verbaut werden. Drei 40mm Turbofan Lüfter von NMB mit bis zu 12.000upm und 4-poligem PWM Anschluss sind bereits im Gehäuse vorinstalliert. Frontseitig sind zwei USB 3.0 Ports verfügbar. Intern lässt sich via optionaler Riserkarte noch eine PCIe Steckkarte mit voller Bauhöhe integrieren.
The Thermaltake TR100 is an 18.4-liter SFF (Small Form Factor) case packed with many details. The right chamber houses the Mini-ITX motherboard and the SFX power supply, while the graphics card is located in the left chamber and connected to the motherboard via the included PCI-e 4.0 riser cable. Above these essential components is the cooling system: the TR100 can accommodate a 280 mm AIO to dissipate heat from the CPU. All panels are well-ventilated and removable to provide optimal cooling performance in a compact form factor and to simplify the user experience when building a PC system with the TR100. The TR100 has two separately available accessories: the 3.9" LCD screen kit, which can be installed at the front of the TR100, and the TT Traveling Suite Case, which keeps your system protected when gaming on the go wherever you are.
Das APNX V2 ist ein Premium-PC-Gehäuse, das für hervorragende Kühlung, elegante Ästhetik und Anpassungsfähigkeit entwickelt wurde. Seine drei abnehmbaren Hartglasplatten bieten einen rahmenlosen Panoramablick, während das X-Pand Flow Design die Gesamtluftströmungsdynamik erheblich verbessert. Mit Unterstützung für bis zu 10 Lüfter, 360-mm-Kühler und zwei 16-cm-Lüfter an der Unterseite sorgt es für eine erstklassige Wärmeleistung. V2 unterstützt gängige Mainboards mit Reverse-Anschluss für eine übersichtlichere Kabelverwaltung. Funktionen wie eine GPU-Halterung, eine abnehmbare Motherboard-Kabelabdeckung und ein austauschbares PSU/HDD-Fach verbessern die Haltbarkeit und Anpassungsmöglichkeiten. Mit vertikaler oder horizontaler 360-mm-AIO-Montage und Unterstützung für den APNX 10-Port-Lüfter-Hub bietet das APNX V2 effiziente Kühlung und mühelose Anpassungsmöglichkeiten für Hochleistungs-Builds.
Das RM53-502 unterstützt Mainboards mit einem Formfaktor bis zu SSI EEB und besitzt zudem insgesamt 8 PCI-Erweiterungssteckplätze, die problemlos bis zu 4 Grafikkarten in Servergüte aufnehmen. Die von der Vorderseite zugänglichen Anschlüsse für Erweiterungssteckkarten und das Design der E/A-Komponenten sind für diese Ausrichtungsweise mit untereinander austauschbaren Griffleisten und Einschubschienen ausgestattet. Im Inneren sind Optionen in vorder- und rückseitigen Konfigurationen für untereinander austauschbare Montagepositionen des 5,25-Zoll-Käfigs und des Netzteils vorhanden. Entsprechend der SilverStone-Designphilosophie für Gehäuseeinschübe ist das RM53-502 zur Verbesserung der Kühlleistung von Servergehäusen mit Flüssigkeitskühlern in Größen bis zu 360 mm kompatibel, die für eine effiziente Wärmeableitung und optimale Leistung sorgen.
The STAGE MIRROR is more than just a PC case—it is a stage for your personal expression. With its distinctive, forward-facing mirrored platform, the STAGE MIRROR is designed for creatives, collectors, and enthusiasts who value both performance and individual style. This unique design transforms your system into a personal gallery, putting story and style at the forefront. To deliver exceptional thermal performance, the case supports fan sizes from 120 mm up to 200 mm and can accommodate up to twelve 120 mm fans—six on top and six on the bottom. It also supports radiators up to 360 mm, meeting the cooling requirements of high-end, custom liquid cooling setups. The case is compatible with Mini-ITX, Micro-ATX, and ATX motherboards, including BTF layouts (Back-Connect) within the ATX form factor. It includes a high-quality PCIe 5.0 riser cable, enabling vertical GPU installation and offering both next-generation performance and enhanced presentation right out of the box. The Stage Mirror supports GPUs up to 430 mm long and power supplies up to 210 mm long, making it suitable for flagship components with no compromises. With USB 4.0 Gen 2x2 Type C (up to 20 G) and 2x USB 3.2 Gen 1 Type A ports (up to 5 G), you get ultra-fast data transfer and future-proof accessibility.
The Jonsbo X400 Pro is the premium variant of the X400 series and is aimed at enthusiasts who value excellent material quality. In contrast to the base version, the outer frame is made of real aluminum – for maximum stability, a premium feel, and a durable finish. Aluminum frame for an elegant appearance and high torsional rigidity 13 fan mounts – extreme cooling capacity for high-end builds Support for 360 mm radiators on the top and side Spacious interior for GPUs up to 427 mm and CPU coolers up to 176 mm USB-C (Gen 2), 2x USB-A, and audio/mic on the front I/O Case with a premium character The Pro version of the X400 uses an aluminum frame instead of plastic like the standard model. This not only ensures a more elegant appearance, but also greater robustness and better heat dissipation – ideal for demanding setups. Maximum air and water cooling Up to 13 fans can be installed in the case – three on the top, three on the side, two at the rear, two on the back side, and three on the bottom. In addition, two 360 mm radiators can be installed simultaneously – optimal for push/pull or dual-AiO systems. Compatible, spacious, and future-proof Whether classic or back-connect motherboards: the X400 Pro supports all common form factors and offers enough space for high-end graphics cards, power supplies up to 180 mm, and modern cooling concepts – all packaged in a high-quality aluminum chassis.
Das FLP02 kombiniert Retro-inspiriertes Design mit klassisch-beigem Finish, modernen Kühlmöglichkeiten und flexiblen Einbauoptionen. Die klassisch gestaltete Front ist mit der von 5,25"-Floppy-Laufwerken inspirierten Abdeckung für Laufwerke, den ikonischen Reset- und Turbo-Tasten und dem als typischer Kippschalter gestalteten Power-Button genau das Richtige für Retro-Fans. Der Turbo-Knopf sorgt dabei für die sofortige Beschleunigung der Lüfter auf volle Drehzahl, was auch über das LED-Feld angezeigt wird. Drei Lüfter sind im Auslieferungszustand bereits enthalten - weitere Kühlmöglichkeiten lassen sich als Lüfter oder als Radiatoren flexibel hinzufügen. Dabei nimmt das FLP02 CPU-Kühler bis zu einer Höhe von 182 Millimetern auf und unterstützt den Einbau von Steckkarten bis zu einer Länge von 386 Millimetern (nach Entfernung des Laufwerkskäfigs in der Front). Außerdem mit dabei: Eine Halterung für lange GPUs und Unterstützung für Mainboards mit Formfaktor SSI-CEB. Das Schlüsselschloss an der Vorderseite trägt zum Retro-Look bei und verhindert unbeabsichtigtes Ein- und Ausschalten oder Zurücksetzen. Die 5,25"-Einschübe an der Front sind kompatibel mit Hot-Swap-Adapterkäfigen, so dass das FLP02 auch für Server-Builds gut geeignet ist.
Das Hyte Y70HYTE Y70 HSR Firefly ist ein verbessertes, modernes, ästhetisches ATX-Mid-Tower-Gehäuse mit zwei Kammern, das Gaming-Erlebnisse der nächsten Generation mit massiven vertikalen 4 Steckplätzen bietet und maximale Leistung durch enorme Kühlkapazität ermöglicht. Gleichzeitig feiern Sie Ihre Lieblingshardware, indem Sie Ihren PC so präsentieren, wie er gesehen werden sollte. Im Lieferumfang des Gehäuses ist ein luxuriöser PCIE 4.0 x 16-Riser mit einer farblich abgestimmten Haube für einen ununterbrochenen visuellen Fluss enthalten, der für eine schmerzlose GPU-Installation und einen reibungslosen Build-Prozess sorgt. Es ermöglicht auch eine Fülle von PCIE-Karten mit halber Höhe, die hinter dem Thron der vertikalen Grafik sitzen. Ein geräumiger Innenraum bietet Platz für einen bis zu 360 mm langen und 125 mm dicken Heizkörper an der Seite und eine verstellbare obere Halterung, die oben einen 360-mm-Kühler mit einer Dicke von bis zu 68 mm aufnehmen kann. Zusammen mit der kalten Bodenkühlung an der Unterseite und einem zusätzlichen Lüfter an der Rückseite des Gehäuses verfügt das Y70 über eine Gesamtkapazität von 10 Lüftern in einem vollständig bestückten Gehäuse. Mit über 180 mm Abstand zum Seitenglas werden Enthusiasten von Luft- und Wasserkühlung gleichermaßen die Flexibilität zu schätzen wissen, die ihnen das Gehäuse bietet, um die robustesten Kühlkonfigurationen zu schaffen, die möglich sind.
Die AGOS MAX-Serie ist ein Premium-Mid-Tower-Gehäuse, das speziell für Gamer entwickelt wurde, die Wert auf Leistung und Stil und legen. Die Frontplatte mit abnehmbaren Holzdekorstreifen bietet eine einzigartige Ästhetik, die sich individuell an Ihr persönliches Setup anpassen lässt. Diese Serie ist in zwei Versionen erhältlich, um unterschiedlichen Vorlieben gerecht zu werden. Das AGOS MAX -MS4 ist mit drei vorinstallierten 140-mm-ARGB-Lüftern an der Vorderseite und einem vorinstallierten 140-mm-ARGB-Lüfter an der Rückseite ausgestattet. Diese sorgen für einen kraftvollen Luftstrom und beeindruckende Lichteffekte für ein immersives Gaming-Erlebnis. Die Standardversion des AGOS MAX verfügt über einen einzelnen 140-mm-Lüfter an der Rückseite – perfekt für Nutzer, die ein klares und dezentes Design bevorzugen. Beide Versionen verfügen über eine vorinstallierte, bewegliche GPU-Halterung für Grafikkarten unterschiedlicher Länge, die ein Durchhängen verhindert und für langfristige Stabilität von High-End-Komponenten sorgt. Egal, ob Sie Wert auf maximale Kühlleistung, die Präsentation Ihrer Hardware oder den Bau eines optisch unverwechselbaren Systems legen – die AGOS MAX-Serie - Ihre ultimative Kampfstation.
The AeroCool P500D combines aesthetics and performance at the highest level. Thanks to the front and side panels made of tempered glass, this midi-tower case perfectly showcases your components, making it ideal for systems that are meant to be the center of attention. With support for high-end graphics cards up to 418 mm in length and CPU air coolers up to 165 mm in height, it provides the necessary space and compatibility for high-end gaming and professional content creation. Supporting up to nine 120 mm fans, the P500D delivers comprehensive cooling performance even for the most demanding systems. Low temperatures and high performance are ensured even during intensive use or gaming sessions. The case includes easily removable dust filters for quick cleaning and improved airflow—so your system runs optimally and dust build-up is prevented.
This highly expandable professional workstation case is designed for users who require maximum flexibility, high data security, and reliable cooling performance. It features eight hot-swap bays that support both 2.5-inch and 3.5-inch SAS or SATA SSDs and HDDs. The integrated backplane is designed for eight SAS/SATA drives, with 12 Gb/s Mini-SAS HD SFF-8643 connectors and SGPIO support, enabling fast and secure drive swaps during operation. The WS380-E is ideal for high-performance hardware configurations, accommodating both E-ATX and SSI-EEB motherboards and offering up to eight PCI expansion slots—providing ample space for multi-GPU setups. Expansion cards up to 370 millimeters long can be installed, ensuring that even large high-end graphics or accelerator cards fit easily. For reliable power supply, both standard ATX (PS2) power supplies and 2U redundant power supplies are supported, giving the system additional redundancy. The case is also highly versatile in cooling, supporting radiators up to 360 millimeters, making it ideally suited for powerful water cooling systems. Additionally, it offers two 5.25-inch bays and another 3.5-inch bay for extra drives or accessories. A lockable front door enhances the security of installed components, while the front I/O features USB-C and two USB 3.0 ports for fast and convenient access.
The AeroCool P300D combines a sleek design with strong functionality for gamers and creatives. Thanks to its full glass side panels, this mini-tower case showcases your hardware perfectly—ideal for RGB lighting and high-performance components. The front and side panels made from tempered glass provide a crystal-clear view of your components. Display your high-end hardware in stunning detail and enjoy a premium look from any angle. With support for up to nine 120 mm fans, the P300D offers comprehensive cooling performance, even for the most demanding systems. Low temperatures and high performance are ensured even during intensive use or long gaming sessions. Support for graphics cards up to 418 mm in length ensures the case is ready for the most powerful GPUs, whether you're gaming, editing, or rendering 3D content. Smart maintenance features include easily removable dust filters for quick cleaning and improved airflow—keeping your system running optimally and preventing dust buildup.
Das AeroCool B509A Flow ist ein Midi-Tower-Gehäuse, das hohe Leistung mit elegantem, funktionalem Design vereint. Die Frontblende aus Mesh optimiert den Luftstrom und setzt Ihre Komponenten perfekt in Szene. Dank Unterstützung für Grafikkarten bis zu 340 mm und Wasserkühlungen bis zu 360 mm ist es bestens für High-End-Hardware gerüstet. Ausgestattet mit acht Lüfterplätzen, magnetischen Staubfiltern und einer Seitenwand aus gehärtetem Glas hält das B509A Flow Ihr System kühl, sauber und optisch ansprechend.
The SilverStone RM32 is a 3U rackmount case designed specifically for high-performance rackmount workstations and servers with large-format high-end GPUs. It supports motherboards up to the SSI-EEB standard, features four full-height PCIe expansion slots for graphics cards up to 177 mm wide (or 162 mm with a redundant CRPS power supply), is compatible with redundant SFX-L or 2U-CRPS power supplies, offers space for radiators up to 360 mm in a push-pull configuration with six fans, and includes a PCIe riser cable. This makes it the ideal solution for rendering workstations, deep learning workstations, virtualization servers, and rackmount AI systems that require GPU expansion in a 3U form factor. The main distinguishing feature of the RM32 compared to other SilverStone 3U cases is the use of a PCIe riser cable, which rotates the expansion slots by 90 degrees. This allows even high-end dual or triple-slot graphics cards (up to 177 mm in width) to be installed in a compact 3U enclosure. This solution—common in high-end workstation cases—enables the installation of GPUs like the NVIDIA RTX 4090, RTX 4080, and their AMD counterparts in rack configurations without the need for a 4U or 5U case. The maximum height for the CPU cooler is reduced to 86 mm if it is positioned below the riser cable; in standard positions, it remains at 110 mm. The front cooling system supports up to six 120 mm fans in a push-pull configuration (3+3) with AIO radiators up to 360 mm and a maximum total thickness of 80 mm (fan + radiator). Two 60 mm fans on the rear I/O panel ensure warm air is expelled. The SFX-L power supply or redundant 2U-CRPS module can be up to 250 mm long (unlimited if the 3.5" drive bays are removed) and is thus compatible with high-performance units like the 1200 W SFX-L power supply. The front I/O panel features a USB Type-C port and two USB 3.0 ports, as well as four status LEDs for immediate visual monitoring. Compatibility with SilverStone RMS01/RMS09-20 rails allows for professional installation in any standard 19" rack.
Das Pureline 270 ist mit Hartglasplatten an der Vorder- und Seite des Gehäuses ausgestattet, um optimale Betrachtungswinkel für Ihr System im Inneren zu bieten. Das Gehäuse unterstützt Radiatoren von bis zu 360 mm auf der Oberseite des Gehäuses und kann den Kühldedarf einiger der anspruchsvolleren Systeme decken, während es gleichzeitig ein ansprechendes Erscheinungsbild beibehält, um Ihre Komponenten zur Geltung zu bringen. Das Pureline 270 wird mit drei 120-mm-Lüftern geliefert, von denen zwei seitlich angebracht sind, und ein weiterer an der Rückseite des Gehäuses, um eine Luftabfuhr zu bieten. Das Gehäuse kann bis zu zwei 2,5Zoll-SSDs oder zwei 3,5-Zoll-HDDs unterstützen, an jeweils einem dedizierten Speicherort und jeweils einem gemeinsam genutzten Speicherort. Zwei USB 3.0-Anschlüsse, ein USB 3.2 Gen 2 Typ C und HD-Audio Anschlüsse sind auf der Oberseite angebracht, um bei Bedarf direkten Zugriff zu ermöglichen.
