Tutvustame Win EM-013, keerukat ja mitmekülgset elektroonilist metronoomi, mis on loodud selleks, et aidata muusikutel kõigil tasemetel parandada oma ajastust ja rütmioskusi. Selles elegantses ja kompaktses seadmes on ühendatud uuenduslik tehnoloogia ja kasutajasõbralikud funktsioonid, mis teeb sellest asendamatu vahendi nii harjutamiseks kui ka live-esinemiseks. Win EM-013 on intuitiivse kasutajaliidesega, mis muudab selle kasutamise lihtsaks, ning selge digitaalne ekraan võimaldab teil määrata täpseid temposeadeid vahemikus 30 kuni 250 lööki minutis. See pakub laia valikut erinevatele muusikastiilidele sobivaid taktimärke ja rütmimustreid, nii et muusikud algajatest kuni professionaalideni leiavad oma harjutusvajaduste jaoks sobiva rütmi. Win EM-013 konstruktsiooni keskmes on vastupidavus ja kaasaskantavus. Tänu kergele konstruktsioonile ja mugavale suurusele on seda lihtne kanda pilli kohvris, reisikotis või taskus, nii et saate selle asendamatu tööriista kõikjale kaasa võtta. Metronoomil on sisseehitatud kõlar, mis annab selget ja tugevat heli, mida saab reguleerida vastavalt erinevatele keskkondadele, nii et saate rütmi kuulda ka valjemas keskkonnas. Samuti on sellel kõrvaklapipesa privaatseks harjutamiseks, nii et kasutajad saavad keskenduda ilma häireteta. Win EM-013 on varustatud ka tap tempo funktsiooniga, mis võimaldab kasutajatel tempo seadistada lihtsalt nupule vajutades - see on mugav funktsioon muusikutele, kes soovivad tempot kuulmise järgi sobitada. Lisaks võimaldab mälufunktsioon salvestada eelistatud seaded, mis tagab kiire ja lihtsa seadistamise tulevaste seansside jaoks. Win EM-013 on mõeldud pikaajaliseks kasutamiseks, seega töötab see usaldusväärselt alati, kui inspiratsioon tabab. Olenemata sellest, kas olete õpilane, õpetaja või kogenud esineja, Win EM-013 on usaldusväärne ja asendamatu tööriist veatu ajastuse ja muusikalise esituse täiustamiseks. Tänu oma täpsusele, kasutusmugavusele ja kaasaskantavusele on see metronoom loodud selleks, et aidata ja inspireerida muusikuid saavutama rütmilist tipptaset.
The Raspberry Pi 5 case is made of ABS construction with cut-outs for the dual HDMI, Audio/Video, USB, Ethernet ports, as well as the USB-C power connector and access to the microSD card. The status LED can be easily visible through the rubber reflector. An optional clip-on lid can be removed to provide access to your Raspberry Pi's GPIO pins or connect a HAT. The case is a refinement of the Raspberry Pi 4 case, with improved thermal features to support the higher peak power consumption of Raspberry Pi 5. It integrates a variable-speed fan which is controlled by a dedicated connector on the Raspberry Pi 5 PCB. The case is available in Pi's signature red-white combination.
"Phanteks Enthoo Pro Full Tower Black on kõrgekvaliteediline arvutikapp, mis on mõeldud entusiastidele, kes otsivad oma arvutisüsteemis esteetilisust ja funktsionaalsust. Sellel Full Toweri korpusel on elegantne ja kaasaegne disain, massiivne teraskorpus ja harjatud alumiiniumist viimistlus, mis lisab professionaalset ja elegantset puudutust. Enthoo Pro korpuse ruumikas sisemus pakub ruumi kõige nõudlikumatele komponentidele, sealhulgas laiendatud ATX emaplaatidele, mitmele videokaardile ja mitmetele jahutusvõimalustele. See toetab mitmesuguseid vesijahutuskonfiguratsioone ning selles on palju ruumi suurte radiaatorite ja ventilaatorite jaoks, tagades optimaalse õhuvoolu ja soojusjuhtimise. Korpusel on modulaarsed kõvakettapuurid ja eemaldatavad kettamahutid, mistõttu on seda lihtne paigaldada ja kohandada vastavalt kasutaja vajadustele. Täiendava mugavuse tagamiseks on Enthoo Pro-l mitu kaablijuhtimise võimalust koos strateegiliselt paigutatud tihendite ja velcro-rihmadega, mis hõlbustavad puhast ja organiseeritud kokkupanekut. Esikülje I/O-paneelil on USB 3.0 pordid, audiopistikud ja hõlpsasti ligipääsetav toitenupp, mis parandab kasutajakogemust oma ligipääsetavuse ja funktsionaalsusega. Tänu suurele külgmisele aknapaneelile saavad kasutajad oma sisemisi komponente esitleda, kaitstes neid samal ajal tolmu ja prahi eest. Olenemata sellest, kas oled mängur, professionaal või amatöör-ehitaja, Phanteks Enthoo Pro Full Tower Black pakub täiuslikku tasakaalu disaini, funktsioonide ja jõudluse vahel, et saada oma unistuste arvutiks.
Horizon ARGB FLOW Midi White Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
Das Externes Gehäuse für 2.5" SATA HDD / SSD mit SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) aus Kunststoff dient dem Einbau einer 2.5″ SATA Festplatte oder SSD. Trotz der schlanken Bauform können Festplatten bis zu einer Höhe von 9,5 mm eingebaut werden. Über eine am Gehäuse verbaute USB Type-C Buchse wird das externe Gehäuse mit einem PC oder Notebook verbunden. Das beiliegende USB Type-C zu USB Typ-A Kabel ermöglicht den Anschluss an eine freie USB Typ-A Buchse. Selbstverständlich kann das Gehäuse auch via optionalem USB Type-C Kabel an eine freie USB Type-C Buchse oder einen freien Thunderbolt Port angeschlossen werden. Dank des VIA Chipsatzes unterstützt dieses Festplattengehäuse SuperSpeed USB mit bis zu 10 Gbps Übertragungsgeschwindigkeit. Somit kann die volle SATA 6 Gb/s Übertragungsrate der Festplatte ausgenutzt werden.
XPG BATTLECRUISER II ST. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Frontventiler installeret: 3x 120 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 506 mm, Højde: 550 mm. Pakkebredde: 339 mm, Pakkedybde: 643 mm, Pakkehøjde: 615 mm
The chassis stand for the Tower 600 Light-year Green includes a base cover for the case and a display stand. It allows users to set up their Tower 600 Light-year Green horizontally, making it easy to customize the case and create a unique experience. A dust filter is also attached to the base plate to provide protection against dust. The chassis stand comes with rubber pads to prevent scratching the chassis during installation. The abrasion-resistant material ensures long-lasting protection without affecting the finish of the tower. The small raised sections of the anti-slip design are strategically placed to provide secure grip and prevent unwanted slipping during use.
Small case for simple systems Two low-profile expansion slots for graphics cards Supports ITX-sized motherboards and CPU cooler height up to 38 mm Power supply: 1U Flex up to 150 mm One USB-C port on the I/O panel The Jonsbo NV10 in detail The Jonsbo NV10 is a small case that can be placed on a desk thanks to its lightweight design, and its simple black aesthetic fits into any setup. You can connect an external device to the USB-C port on the I/O panel. Hardware options The mini-tower supports installing ITX-sized motherboards. The CPU cooler should not exceed a height of 38 mm. The two low-profile expansion slots allow the installation of a low-profile graphics card up to 190 mm in length. When it comes to the power supply, only a 1U Flex power supply is supported, which should not be larger than 150 mm.
The LCD Panel Kit is an exclusive expansion accessory for the The Tower 200 Turquoise case. With its 3.9-inch LCD display, users can use the TT RGB Plus 2.0 software to gain full control over performance monitoring and customized effects. In addition, the LCD Panel Kit can be combined with other Thermaltake Ultra series products, providing an optimal visual LCD experience.
