großer Midi-Tower, mit Tempered Glass an Seite, bis zu 11 Lüfter, Platz für Radiatoren bis 360 mm, Mainboards bis ATX, GPU bis 400 mm und CPU-Kühler bis 171 mm Höhe, bis zu sechs Laufwerke möglich
Small case for simple systems Two fans installed Supports ITX size motherboards and CPU cooler height up to 38 mm Up to four 2.5-inch SSDs possible Power supply: 1U Flex up to 150 mm The Jonsbo N10 in detail The Jonsbo N10 is a small case that can be placed on the desk due to its light weight and fits into any setup thanks to its simple silver design. Cooling The mini-tower already comes with two small fans installed, providing sufficient cooling. Additional fans cannot be installed. For this reason, the tower does not support the installation of graphics cards, as these require more cooling. Nevertheless, a processor with integrated graphics can be installed without any problems. Hardware options The mini-tower supports the installation of ITX size motherboards. The CPU cooler should not exceed a height of 38 mm. To store programs and games, up to four 2.5-inch SSDs can be installed. For the power supply, note that only a 1U Flex power supply is possible, which should not exceed 150 mm in length.
Small case for simple systems Two fans installed Supports ITX-size motherboards and CPU cooler height up to 38 mm Up to four 2.5-inch SSDs possible Power supply: 1U Flex up to 150 mm The Jonsbo N10 in detail The Jonsbo N10 is a small case that can be placed on a desk thanks to its low weight and fits into any setup with its silver, minimalist design. Cooling The mini-tower already has two small fans installed, providing sufficient cooling. Additional fans are not possible. For this reason, the tower does not support the installation of graphics cards, as they require more cooling. However, a processor with integrated graphics can be installed without any problems. Hardware options The mini-tower supports the installation of ITX-size motherboards. The CPU cooler should not exceed a height of 38 mm. For saving programs and games, up to four 2.5-inch SSDs can be installed. For the power supply, make sure only a 1U Flex unit is possible, and it should not be larger than 150 mm.
O11 VISION COMPACT Two top panel options: mesh or tempered glass Vision mode with tempered glass for an uninterrupted view of components Mesh mode with fan bracket for additional radiator or fan support Supports up to 11 fans and a maximum of 360mm large radiator Compatible with back-connect ATX motherboards Hidden AIO tube design for a streamlined appearance Dual-chamber layout with cable management compartment and cable holders
Conceptronic DONN19G. Ühenduvustehnoloogia: Juhtmega ühendatud, Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C, USB Power Delivery kuni: 100 W. Toote värv: Hall, Ühilduvad mälukaardid: MicroSD (TransFlash), SD, Andmeedastuskiirus: ...
XG172 | MidiTower | PSU Not included | Cooling Fan Support (mm): Side:2x 120mm Top:3x120mm / 2x140mm Rear:1 x 120mm Bottom: up to 3 x 120mm | Dimensions 421 x 220 x 490mm
The Lian Li DAN Cases A3-mATX Wood Edition in black combines modern design with an elegant walnut wood front panel. Thanks to excellent airflow through mesh panels, flexible configuration options, and space for high-end hardware, this case is the ideal choice for those seeking performance and style in a compact format. Perfect for demanding builds with a personal touch! Micro-ATX case by Lian Li in collaboration with DAN Cases Elegant front cover made from premium walnut wood and side panel of tempered glass Mesh panel on the top for excellent airflow Flexibly customizable: Let your imagination run wild Outstanding cooling thanks to space for 360 mm radiators Suitable for motherboards in Micro-ATX or Mini-ITX form factors Supports various power supplies from SFX to ATX A touch of luxury: The Lian Li DAN Cases A3-mATX Wood Edition in black If you're looking for a small form factor case for high-performance PC hardware, you should take a closer look at the Lian Li DAN Cases A3-mATX Wood Edition. This case combines a minimalist design with premium features: the elegant walnut wood front gives your setup an exclusive touch. With a capacity of about 26 liters, this Micro-ATX case is compact and space-saving. At the same time, the A3-mATX Wood Edition is perfect for high-end PC components, offering effective cooling despite its small size. With plenty of room for fans and radiators and generous ventilation openings, this mini tower easily meets the demands of powerful hardware. Flexibility meets performance: The fan and cooling options of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX Wood Edition offers space for up to 10 fans in the 120 mm format. These can be distributed as follows: three on the top, three on the side, three on the bottom, and one on the rear. Alternatively, two 140 mm fans can be mounted on both the top and side. With 25 mm thick fans on the case bottom, the GPU’s height is limited to 61 mm (3 slots). CPU air coolers can be up to 165 mm tall. Lian Li and Daniel Hansen also considered water cooling when developing the A3-mATX: A radiator can be installed in three locations inside the case: either a 360 mm (triple radiator) or 280 mm (dual radiator) on the top or the side. You must choose one of these two positions. The bottom of the case accommodates an additional 240 mm radiator. If you mount the fans below the radiator, you can even install a 360 mm radiator. Customizable configuration: The versatile possibilities of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX is suitable for a motherboard in Micro-ATX or Mini-ITX form factor. Unlike a Mini-ITX case, the PC case offers four expansion slots, allowing you to install a graphics card up to 4 slots tall and up to 415 mm long. You can install two 2.5-inch SSDs on a bracket. You can also install a 3.5-inch HDD or another 2.5-inch drive at the bottom of the case. You have the choice between an ATX, SFX-L, or SFX power supply, which you can mount flexibly at the front or side to create more space for your graphics card or the radiator—just as you prefer. In general, the smaller the power supply in the A3-mATX, the more room you have for the rest of your hardware. The I/O panel on the front of the Lian Li DAN Cases A3-mATX Wood Edition features two USB 3.0 Type A ports, one USB 3.1 Type C port, two 3.5 mm audio jacks (Mic-In/Audio-Out), and a power button. Note: The Lian Li DAN Cases A3-mATX Wood Edition offers numerous configuration options, but space inside this case is limited. The size and position of the power supply are crucial in selecting the right PC components. Therefore, we recommend careful planning using the manual in advance.
The IT-5905 is a modern Midi-Tower with a robust and compact design. It knows to convince due to its user-friendly assembly of front connectors in the upper part of the front panel.Besides the design, the IT-5905 convinces with space for up to four optional coolers, several mounting options for 3.5" and 2.5" HDD´s and space for graphics cards with a length of 32cm.Two USB 3.0 front connectors and a depot in the cap (for USB-sticks for example) complete the offer and make this case a real all-rounder.KujutegurMiditornTüüpPC5,25" lahtrite arv33,5" lahtrite arv4Emaplaadi toetatud kujuteguridATX,Micro-ATXToote värvMustAknagaJah2,5" salvede arv2Sisemiste 3,5" salvede arv3Väliste 5,25" kettalahtrite arv3SobilikKodu/kontorGraafikakaardi maksimaalne pikkus32 cmKaasas toiteplokkEiUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahMaksimaalne esiventilaatorite arv1Toetatud esiventilaatorite läbimõõt120 mmMaksimaalne küljeventilaatorite arv2Toetatud küljeventilaatorite läbimõõt120 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt80,120 mmToetatud kõvakettasuurused2.5,3.5"JuhtmehaldusJahLähtestusnuppJahLaius200 mmSügavus415 mmKõrgus410 mm
Classic 19" Rack with a lot of space for different drivesYou can remove the HDD cages with a few steps for easy mounting of internal devices.5 mounting slots with full height and the possibility to mount an ATX PSU ensures a professional and cost efficient solution.The lockable doors in front of the slots prevent, unauthorized access.Integrated air filters ensure clean air and a flawless cooling.KujutegurPüstikTüüpServerMaterjalTeras5,25" lahtrite arv43,5" lahtrite arv5Emaplaadi toetatud kujuteguridATX,Micro-ATX,uATX,Mini-ITXToote värvMustAknagaEi2,5" salvede arv2Sisemiste 3,5" salvede arv5Väliste 5,25" kettalahtrite arv4Püstikmontaaž3UMaterjali paksus1,2 mmSertifikaatRoHS, CEKaasas toiteplokkEiUSB 2.0 portide arv2AudiosisendEiAudioväljundEiInstallitud tagaventilaatorid2x 80 mmMaksimaalne tagaventilaatorite arv2Toetatud tagaventilaatorite läbimõõt80 mmToetatud kõvakettasuurused2.5,3.5"LED-indikaatoridVõimsus, HDDLähtestusnuppJahLaius485 mmSügavus530 mmKõrgus133 mmKaal9,34 kgPakendi laius560 mmPakendi sügavus630 mmPakendi kõrgus225 mmPakendi kaal11,1 kg
Cabinet Form Factor: Midi Torn Mainboard Form Factor1Supported Mainboard Form Factor: ATXMicro ATX 3.5-inch Internal Drivesahtleid12.5-inch Internal Drivesahtleid: 2 Expansion pesasi1(3.5-mm minijack x 2) Power seadme tüüp: toiteplokk Optional Power Device Location1Lisatarvikud: Screws Chassis Features1kg Pack kaal Netto (kg): 2.8 kg Pieces in pack1Box kaal Brutto (kg): 3.61kg Retail Packaging Netokaal Carton: 0.5 kg Retail Packaging Netokaal plastik1kg Packs in Box: 1EAN Code: 42604556435971
Riesiger Dual-Chamber Big-Tower, Seitenteil und Front aus Tempered Glass, Grafikkarten bis 446 mm, 3x 360-mm-Radiatoren gleichzeitig möglich, Deckel und Seitenwand aus Aluminium, bis zu 10x 120-mm-Lüfter, 1x USB Typ C und 4x USB 3.0 im Frontpanel
Edler Big-Tower von PHANTEKS, Seitenteil aus Tempered Glass, optimiert für Luft- und Wasserkühlung, bis zu 503 mm lange Grafikkarten, adressierbare RGB-LED-Beleuchtung, für Dual-Systeme und Dual-PSU-Systeme geeignet
DIMENSIONS : (D)420mm X (W)269.5mm X (H)380mm MOTHERBOARD : E-ATX (Max 280 mm wide)/ATX/ Micro-ATX/ Mini-ITX PSU : SFX/ SFX-L MATERIAL : Steel 4 mm Tempered Glass 2mm Aluminum (top and left panel) FAN SUPPORT : Top: 3x 120mm or 2x 140mm Side: 2x 120mm or 2x 140mm Bottom: 3x 120mm or 2x 140mm Rear: 1x 120mm RADIATOR SUPPORT : Top: 360mm or 280mm or 240mm radiator Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator GPU LENGTH CLEARANCE : 395mm CPU COOLER HEIGHT CLEARANCE : 170mm VGA Length : 370mm DRIVES : Right side 2 x 2.5″ SSD + back plate 2 x 3.5″ HDD (or SSD) EXPANSION SLOTS : 3 or 5 or 7 slots (depends on back panel) IO PORTS : 2 x USB 3.0, 1 x USB 3.1 TYPE-C, 1 x HD Audio, Power Button DUST FILTERS : 1 x Top, 1 x Bottom, 2 x Side
