The outstanding and eye-catching hair-line design of the front panel of this brand new mATX chassis, transports a brushed aluminum feeling thereby blending perfectly into both Home and Office environments. mATX, CHIEFTEC case Driver bay ext.: 3x 5,25"/ 1x 3,5" - int.: 3x 3,5" / 1x 2,5" 2x USB 3.0, Mic-in, Audio-out (AZALIA / HD-Audio) Cooling (optional): 1x 92mm on the rear, 1x 120mm on the front, 2x 120mm on the left side panel install VGA card lenght (max): 280mm
The Jonsbo D31 MESH mATX case is a sleek and versatile option for building a powerful computer. Its front mesh design allows for optimal airflow and its tempered glass side panel adds a touch of elegance. The case can accommodate up to 8 fans and 3 radiators, and can fit GPUs up to 400mm in length. The versatile layout allows for a customizable and optimized use of space.
With the Lian Li O11 Dynamic Mini V2 Flow, you can make your gaming setup a real eye-catcher: Despite its compact design, this mini case offers a spacious interior with enough room to make your visions a reality. Whether you prefer air cooling, water cooling with an AiO, or vertical installation of your graphics card, this case allows all that and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior for installing powerful hardware Clean cable management: Cable holders and support for motherboards with back-connect design for tidy routing Includes GPU brackets: Allows you to install your graphics card both vertically and horizontally Dust protection: Easy-to-clean dust filters at multiple locations Five pre-installed fans: Three 120 mm fans at the bottom and two 120 mm fans on the side with reverse blades The Lian Li O11 Dynamic Mini V2 Flow: Mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 Flow with sample hardware Equipped with tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 Flow allows you to showcase your hardware. Thanks to its compact size, it fits easily on your desk and instantly becomes the centerpiece of your gaming setup—without annoying cable clutter inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable holders, the case allows you to route cables cleanly. An integrated holder for the heavy 24-pin ATX cable ensures it stays neat and secure, while cleverly positioned straps keep all other cables bundled together. The drive cages can also be used to hide your cables. This makes cable management effortless—whether you're a beginner building your first gaming PC or a pro who doesn’t want to spend hours organizing cables. Flexible installation for motherboards and AiO water coolers With a vertically adjustable motherboard standoff, the case gives you more flexibility for installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The upper position allows you to mount 240 mm and 360 mm AiO coolers, while the lower position supports a 280 mm radiator as well. Well cooled even under full load Up to nine fans possible Space for two water cooling radiators Mesh panel on the top Dust filter on the bottom The fans and radiators ensure adequate cooling for your gaming hardware, even under full load. A mesh panel and dust filter help reduce dust buildup inside the case, extending the life of your hardware. Lian Li O11D Mini V2 Flow fans The Flow version of the O11D Mini V2 comes with five fans pre-installed. These 120 mm fans are equipped with reverse blades: so you always have a clean look without sacrificing precious airflow. Ready for top performance with space for large GPUs The case interior is designed so that even large graphics cards up to 400 mm fit comfortably—whether installed horizontally or vertically. The included GPU brackets ensure a secure hold in both scenarios. This gives you the freedom to choose your preferred GPU installation. Supports motherboards with Mini-ITX, mATX, and ATX form factors—including models with rear cable management (back-connect design). Combined with thoughtful cable holders and Velcro straps, this results in a tidy, clean look: All connectors are neatly concealed behind the motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O Panel The I/O panel module can be mounted both on top of the case and at the front bottom. This allows you to position the case exactly as you like while always having easy access to the power button and ports. If you mount the panel on top, the bottom cover is also removable—improving airflow.
Tootekood: D32 PRO BLACKGTIN: 6970620554327Korpused
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Unlike the D32 STD, the D32 PRO PC case is aimed at the high-end segment with special and practical features such as Back-Connect or improved front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for Back-Connect motherboards Tempered glass side panel ensures a subtle appearance Plenty of room for cooling solutions allows installation of high-performance hardware Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Black: Space-saving and subtle case for high-end hardware Whether you’re building a midrange HTPC or a high-end PC – the D32 PRO Black from Jonsbo comfortably accommodates all kinds of builds. This minimal case fits graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In Back-Connect mode, the maximum CPU cooler height is reduced by around seven millimeters. This ensures that, even with the case’s compact design, your hardware gets adequate cooling. Working together with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the fans ensure enormous airflow inside the case. No cable clutter with Back-Connect With Back-Connect motherboards like ASUS’s BTF series, MSI’s PROJECT ZERO series, or GIGABYTE’s Stealth series, the case in B-mode—with about six to seven millimeters more space—remains almost completely free of visible cable clutter. Since most power and connection cables can be connected at the back of the motherboard, you save time on cable management and still have a clean look inside your case. Combined with the tempered glass side window, your hardware is always on display in an especially appealing way. Powerful cooling in a small space To ensure your powerful hardware stays adequately cooled in this compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for plenty of airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware always stays cool, even under load. Three dust filters on the front, top, and bottom make sure your hardware stays free from dust and dirt. This keeps your temperatures at optimal levels and, among other things, helps extend your hardware’s lifespan.
The Phanteks XT M3 impresses with a space-saving design that offers you more than enough room for high-end components. With effective cooling and tidy cable management, the case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact size: Space-saving case for high-end hardware Effective cooling: Space for up to nine fans Large radiator: Supports installation of a 360 mm radiator on the top Tidy build: Room for excellent cable management Back-connect support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini-case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SFF case built for big things. Compatible with high-end graphics cards and motherboards supporting back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports the installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360-mm radiator can be fitted on top if you prefer water cooling. Besides fans and a radiator, the mesh front also ensures very good airflow. This helps prevent hot air from accumulating inside your case. Your new gaming PC with clean cable management Managing cables neatly is not easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also improves airflow. Mini-ITX case built for powerful hardware Even a large graphics card fits in effortlessly—the case offers space for a GPU up to 430 mm in length. Note that you cannot install fans at the front if you use the maximum GPU length. The CPU cooler should not exceed a height of 175 mm, and the power supply should not be longer than 150 mm.
Das CG530U 4F verfügt über eine einteilige, gebogene Sicherheitsglasscheibe, die nahtlos um die Ecke verläuft. Da keine Fugen die Sichtlinie unterbrechen, bietet sie einen offenen, ungestörten Blick auf das Innere des Systems. Vier ARGB-Lüfter sind vorinstalliert: drei seitlich angebrachte Lüfter mit umgekehrten Rotorblättern und ein Standardlüfter an der Rückseite. Die ausgewogene Anordnung von Lufteinlass und -Auslass sorgt von Anfang an für einen starken Luftstrom und zuverlässige Kühlung. Die Zweikammerkonstruktion trennt Netzteil und Speicherlaufwerke vom Hauptluftstrom. Große Mesh-Einsätze maximieren die Belüftung: Seitlich angebrachte, nach hinten gerichtete Lüfter saugen Frischluft an, während der rückseitige Lüfter die Wärme abführt. So entsteht ein direkter, horizontaler Luftstrom durch das Gehäuse. Das CG530U 4F wurde für anspruchsvolle Hardware entwickelt und unterstützt CPU-Kühler mit einer Höhe von bis zu 160 mm, GPUs mit einer Länge von bis zu 410 mm und Netzteile mit einer Länge von bis zu 210 mm. Es bietet somit eine breite Kompatibilität für leistungsstarke Systeme. Das obere I/O-Panel bietet bequemen Zugriff mit zwei USB 3.0-Anschlüssen, einem Gen2 Typ-C-Anschluss und einer kombinierten Audio-/Mikrofonbuchse.
Das Elite 481 Wood bringt eine warme, wohnliche Ästhetik in leistungsstarke PC-Builds. Mit einem kompakten mATX-Layout mit zwei Kammern und einer aus echtem Naturholz gefertigten Frontblende verbindet es moderne Leistung mit organischen Designelementen. Mit nahtlosem Hartglas, vertikaler Kühlungsunterstützung und Kompatibilität mit Full-Size-Radiatoren ist das Elite 481 Wood ein vielseitiges Gehäuse, das mühelos in Wohnräume, Kreativstudios oder stilvolle Gaming-Setups passt. Die einzigartige Frontblende aus echtem Holz sorgt für einen natürlichen, warmen Farbton, der zu Wohnräumen, kreativen Umgebungen und Spielzimmern gleichermaßen passt und Technologie mit Lifestyle verbindet. Zwei Scheiben aus gehärtetem Glas mit abgeschrägten 45°-Kanten ermöglichen einen klaren Panoramablick auf Ihre Komponenten und Ihre Beleuchtungseinrichtung. Getrennte Bereiche für Hardware und Kabel sorgen für einen effizienten Luftstrom und ein übersichtliches Layout. Die rechte Kammer enthält ein oben montiertes Netzteil und 95 mm Platz für das Kabelmanagement. Unterstützt bis zu 9 Lüfter mit einem von unten nach oben verlaufenden Luftstrom, der die Wärmeabfuhr beschleunigt und eine optimale Systemleistung bietet. Trotz seiner kompakten Größe unterstützt das Elite 481 Wood zwei 360-mm-Radiatoren (oben und unten) und einen 280-mm-Radiator an der Seite - eine flexible Kühlung auf ATX-Niveau. Das Gehäuse enthält 3 ARGB-Lüfter - 2 seitliche Ansauglüfter mit umgekehrten Blättern und 1 rückwärtiger Abluftlüfter. Jeder Lüfter verfügt über Daisy-Chain-Anschlüsse für ein sauberes Kabelmanagement und eine optimierte Einrichtung und ist vollständig kompatibel mit der ARGB-Software der wichtigsten Motherboards für eine synchronisierte Beleuchtungssteuerung. Mesh-Paneele an der Ober- und Unterseite sorgen für eine ausreichende Luftzirkulation und verbessern die thermische Effizienz. Mit zwei USB 3.0 Typ-A-Anschlüssen und einem USB 3.2 Gen 2x2 Typ-C-Anschluss mit einer Übertragungsgeschwindigkeit von bis zu 20 Gbit/s - perfekt für schnellen Datenzugriff und moderne Gerätekonnektivität
The View 390 TG Snow Mid-Tower Case stands out with a striking design and enhanced visibility thanks to its curved panel and tempered glass panel, allowing users to showcase their systems. The View 390 TG Mid-Tower Case is engineered for next-gen builds and supports both standard and hidden-connector motherboards from ASUS, MSI, and GIGABYTE. The View 390 TG comes equipped with two 120mm PWM fans at the rear, ensuring efficient cooling performance. For optimal cooling, users can install a 360mm radiator on the right side of the View 390 TG Mid-Tower Case. The rotatable PCI-E slots support both horizontal and vertical GPU installation. A supplied GPU holder and riser cable bracket also help support the GPU and prevent sagging. Maximize the visual effects of your View 390 TG Mid-Tower Case by upgrading it with our LCD screen kit. For storage capacity, the View 390 TG Mid-Tower Case offers maximum support for up to three 2.5" SSDs or two 3.5" HDDs in total. Two USB 3.0 ports, one USB 3.2 Gen 2 Type-C port, and one HD audio port are located on the top for easy direct access when needed.
The View 390 TG Mid-Tower case stands out with its striking design and improved visibility, thanks to a curved panel and a tempered glass panel, allowing users to showcase their system. The View 390 TG Mid-Tower case is designed for next-gen builds and supports both standard and hidden-connector motherboards from ASUS, MSI, and GIGABYTE. The View 390 TG comes with two 120mm PWM fans at the rear to ensure effective cooling performance. For optimal cooling, users can install a 360mm radiator on the right side of the View 390 TG Mid-Tower case. The rotatable PCI-E slots support both horizontal and vertical GPU mounting. An included GPU holder and riser cable bracket also help to support the GPU and prevent sagging. Maximize the visual effects of your View 390 TG Mid-Tower case by upgrading it with our LCD screen kit. For storage capacity, the View 390 TG Mid-Tower case offers maximum support for up to three 2.5-inch SSDs or two 3.5-inch HDDs. Two USB 3.0 ports, one USB 3.2 Gen 2 Type-C port, and one HD audio port are conveniently located on the top for direct access when needed.
Die einzigartige dreiteilige Front aus gehärtetem Glas ermöglicht eine freie Sicht auf die PC-Komponenten und die RGB-Beleuchtung. Das macht Ihr Gehäuse zu einem einzigartigen Mittelpunkt im Pool der überfluteten PC-Gehäuse im Aquarium-Stil. Das View 370 TG ARGB ist mit einem SF360 ARGB PWM Reverse-Lüfter auf der MB-Seite und einem SF120 ARGB PWM-Lüfter auf der Rückseite vorinstalliert. Die speziellen Aussparungen im Motherboard-Tray unterstützen die neuesten Motherboards mit versteckten Anschlüssen (sowohl ATX als auch Micro-ATX) der wichtigsten Marken, darunter: ASUS BTF Serie, MSI PROJECT ZERO Serie, und GIGABYTE PROJECT STEALTH Serie. Das View 370 TG ARGB verfügt über drehbare PCIe-Steckplätze, die es dem Benutzer ermöglichen, die Grafikkarte mit Hilfe eines Riser-Kabels (separat erhältlich) vertikal zu installieren. Bei diesem Setup ist die GPU mit der Lüfterseite zur Gehäuseseite ausgerichtet, was eine andere visuelle Darstellung ermöglicht. View 370 TG ARGB ist mit dem 6-Zoll-Bildschirm-Kit (separat erhältlich) kompatibel, das an der Vorderseite der Netzteilabdeckung montiert werden kann. Mit dem LCD-Display können Benutzer die TT RGB Plus-Software verwenden, um die volle Kontrolle über die Leistungsüberwachung zu erhalten. Wenn es um die thermische Leistung geht, stellt sich oft die Frage nach Staub. Das View 370 TG ARGB ist mit abnehmbaren Staubfiltern ausgestattet, um Ihr System vor Staub und kleinen Partikeln zu schützen. Die Laufwerksplatte unterstützt eine 3,5„-HDD sowie eine 2,5“- oder zwei 2,5"-SSDs.
The Krux Helio is a compact microATX case featuring a modern design with dark wood accents on the front, inspired by the Palum model. Its appearance makes it a great fit for offices, living rooms, or gaming setups. Despite its small size, it offers space for up to eight 120mm fans (three at the front, two at the bottom, two at the top — 140mm also possible — and one at the rear), and it comes with a 120mm PWM fan pre-installed at the back. A tempered glass side panel provides a view of the interior, while rounded edges emphasize its modern look. Thoughtfully designed dust filters and an easily removable front panel simplify cleaning and fan installation. Inside, it accommodates graphics cards up to 320mm, power supplies up to 170mm, and CPU coolers up to 175mm. There are also mounts for two 3.5" and one 2.5" drives, as well as radiator support up to 280mm. The I/O ports are located on the lower side and include USB-C 2.0, USB-A 3.0, a 3.5mm combo audio jack, as well as power and reset buttons — especially convenient if the case is placed on a desk.
FULL ATX 3X14CM FANS NOISE ABSOR A new Full-ATX Case with aluminum front panel and great airflow, silence and plenty of space for a whole lot of HDD's and opticals...
Riesiger Dual-Chamber Big-Tower, Seitenteil und Front aus Tempered Glass, Grafikkarten bis 446 mm, 3x 360-mm-Radiatoren gleichzeitig möglich, Deckel und Seitenwand aus Aluminium, bis zu 10x 120-mm-Lüfter, 1x USB Typ C und 4x USB 3.0 im Frontpanel
