Mini tower in black, supports up to 7 fans, room for a radiator up to 240mm, motherboards up to mATX, GPU length up to 410mm, and CPU cooler height up to 171mm, accommodates up to two drives, with a display at the bottom of the front panel The Jonsbo D200 mini case offers you maximum performance in minimal space. Thanks to its compact design, it fits easily on any desk or in your living room without compromising hardware compatibility. Perfect for anyone looking for a powerful gaming PC in a space-saving format. Black mini tower with panoramic design Effective cooling performance with support for seven fans and radiator up to 240mm Supports motherboards up to mATX Space for graphics cards up to 410mm and CPU coolers up to 171mm in height Small front display to show CPU system data Jonsbo D200: Compact mini tower with tempered glass sides and front The Jonsbo D200 is a mini tower that, despite its small size, offers enough space for powerful hardware. Whether high-end graphics cards or an AiO water cooling system—the possibilities are extensive. Extensive cooling options with fans and radiators To keep your hardware cool under any load, the Jonsbo D200 can accommodate up to seven fans simultaneously. The top supports three 120mm or two 140mm fans. Three 120mm fans can be installed on the power supply cover, while one additional 120mm fan can be fitted at the rear. An AiO water cooling system can also be installed if you prefer water cooling for your powerful hardware. There is space at the top for a radiator up to 240mm. Hardware installation The case offers plenty of space for powerful gaming hardware. It supports the installation of large graphics cards up to 410mm, allowing even the latest high-end GPUs from the RTX 5000 series to be installed. Motherboards up to mATX format are supported. The CPU cooler should not exceed a height of 171mm. For storage, up to two drives can be installed. CPU display on the front The built-in display in the Jonsbo D200 always shows you the current temperature of your CPU—for maximum control.
Mini tower in white, supports up to 7 fans, space for a radiator up to 240mm, motherboards up to mATX, GPU up to 410mm, and CPU cooler up to 171mm in height, supports up to two drives, with a display at the bottom of the front panel The Jonsbo D200 mini case offers you maximum performance in minimal space. Thanks to its compact design, it fits effortlessly on any desk or in your living room without compromising on hardware compatibility. Perfect for anyone looking for a powerful gaming PC in a space-saving format. Black mini tower with panorama design Effective cooling performance thanks to seven fans and radiator up to 240mm Motherboards up to mATX Space for graphics cards up to 410mm and CPU coolers up to 171mm in height Small display on the front to show CPU system data Jonsbo D200: Compact Mini Tower with Tempered Glass on Side and Front The Jonsbo D200 is a mini tower that, despite its small size, offers enough space for powerful hardware. Whether high-end graphics cards or an AiO water cooling system – the possibilities are numerous. Extensive Cooling Options with Fans and Radiators To keep your hardware cool under any load, the Jonsbo D200 can accommodate up to seven fans simultaneously. The top supports three 120mm or two 140mm fans. Three 120mm fans can be installed on the power supply cover, while one additional 120mm fan can be fitted at the rear. An AiO water cooling system can also be easily installed if you prefer to cool your powerful hardware with water cooling. There is space on the top for a radiator up to 240mm. Installing Your Hardware The case provides enough room for powerful gaming hardware. It supports the installation of large graphics cards up to 410mm, so even the latest high-end GPUs from the RTX 5000 series can be installed. Motherboards up to the mATX format are supported. The CPU cooler should not exceed a height of 171mm. To store programs and games, a total of two drives can be installed. CPU Display on the Front The integrated display in the Jonsbo D200 shows you the current temperature of your CPU at all times – for maximum control.
Baltimore 530 Mini tower case 1x USB 3.0 + 2x USB 2.0 + HD audio ABS with hair-line & shinny finish Optional: 1 x 80mm at rear, 120mm at front PCI length/CPU cooler height: 270mm/140mm
Build Visibility and Hardware Management, Perfectly BalancedThe dual-chamber design of the FV150 RGB aligns aesthetics with functionality: the glass panels of one chamber are perfect for a clean view of your build while cables, storage and PSU are discreetly hidden in a second chamber. A bottom fan bracket lets you secure fans to the bracket prior to installation, allowing for a completely stress-free setup. GPU and ATX motherboard compatibility offers unlimited flexibility for multiple build configurations.Dual chamber design lets you show off your build while hiding cables, storage drives, and PSU.Supports up to 400mm GPUs and vertical GPU orientation.Supports Mini-ITX, Micro-ATX, ATX motherboards.Engineered bottom fan bracket allows you to attach fans prior to installation.
Das Thermaltake TR100 ist ein 18,4-Liter-SFF-Gehäuse (Small Form Factor), das mit vielen Details aufwartet. In der rechten Kammer befinden sich das Mini-ITX-Motherboard und das SFX-Netzteil, während die Grafikkarte in der linken Kammer untergebracht ist und über das beiliegende PCI-e 4.0 Riser-Kabel mit dem Motherboard verbunden ist. Über diesen wichtigen Komponenten befindet sich das Kühlsystem: Das TR100 ist in der Lage, einen 280 mm AIO zu beherbergen, um die Wärme von der CPU abzuführen. Alle Paneele sind gut belüftet und abnehmbar, um die Kühlleistung in einem kompakten Formfaktor zu bieten, und die Benutzererfahrung beim Aufbau eines PC-Systems mit TR100 zu vereinfachen. TR100 hat zwei separat erhältliche Zubehörteile: das 3,9“ LCD-Bildschirm-Kit das an der Vorderseite des TR100 installiert werden kann, und das TT Traveling Suite Case, das das System sicher schützt, wenn Sie unterwegs spielen wo auch immer Sie sind.
Der Masterframe 360 STAGE LCD wurde für Kreative und Enthusiasten entwickelt, die sowohl Leistung als auch Ästhetik verlangen. Der integrierte, nach vorne gerichtete LCD-Bildschirm verwandelt das Gehäuse in ein visuelles Schaufenster - ideal für die Anzeige Ihrer Lieblingsinhalte oder Medien, die das von der Bühne inspirierte Thema ergänzen. Um eine außergewöhnliche Wärmeleistung zu bieten, unterstützt das Gehäuse Lüftergrößen von 120 mm bis 200 mm und bietet Platz für bis zu zwölf 120-mm-Lüfter - sechs an der Oberseite und sechs an der Unterseite. Außerdem unterstützt es Radiatoren bis zu 360 mm und erfüllt damit die Kühlungsanforderungen von High-End-Flüssigkeitskühlungs-Setups. Auf der Vorderseite bietet das integrierte STAGE LCD zwei verschiedene Modi: Erweiterter Anzeigemodus - Funktioniert als echter zweiter Monitor zur Erweiterung Ihres Desktops oder zur Präsentation von Live-Systeminhalten. Benutzerdefinierter Wiedergabemodus - Enthält 2 vorinstallierte Animationseffekte, die zur Ergänzung von Figuren- und Sammeldisplays entwickelt wurden. Benutzer können auch Inhalte über eine MicroSD-Karte hochladen (JPG- und MP4-Formate), um ein einzigartiges visuelles Erlebnis zu schaffen. Das Gehäuse ist kompatibel mit Mini-ITX-, Micro-ATX- und ATX-Motherboards, einschließlich BTF-Layouts (Back-Connect) innerhalb des ATX-Formfaktors. Es enthält ein hochwertiges PCIe 5.0-Riser-Kabel, das eine vertikale GPU-Montage ermöglicht und sowohl Leistung der nächsten Generation als auch eine verbesserte Präsentation direkt nach dem Auspacken bietet. Der Stage Mirror bietet Platz für bis zu 430 mm lange GPUs und 210 mm lange Netzteile, die für den Einsatz von Flaggschiff-Komponenten ohne Kompromisse ausgelegt sind. Mit USB 4.0 Gen 2x2 Typ C (bis zu 20 G) und 2x USB 3.2 Gen 1 Typ A-Anschlüssen (bis zu 5 G) für ultraschnelle Datenübertragung und zukunftssichere Zugänglichkeit.
As the latest mid-tower case in the Tower Series, the Tower 600 is an ATX case featuring a classic vertical chassis design and an octagonal prism shape, compatible with the latest motherboards with hidden connectors. It supports up to a 420 mm AIO radiator on the right side and a 360 mm AIO radiator on the left side, and offers space for up to thirteen 120 mm fans or nine 140 mm fans. If you want to make the Tower 600 visually more appealing, you can purchase the separately available 3.9" LCD screen kit and chassis stand kit to upgrade the case; the former displays real-time component information and the latter offers a unique look with a special horizontal placement. With its unique design and ample space, the Tower 600 is ready to unleash the full potential of your configuration. The Tower 600 features three 3 mm thick tempered glass panels on the front and two perforated panels on each side. All panels are easily removable without tools. The Tower 600 is equipped with well-designed filters on the top, rear, inner sides, and inner bottom layer to protect your system from dust. It supports a CPU cooler with a maximum height of 210 mm, a GPU with a maximum length of 400 mm (without PSU cover), a power supply up to 220 mm in length, and three 2.5" SSDs or a total of one 3.5" HDD.
The MasterFrame 360 PANORAMA is an open showcase case designed for users who demand both performance and presentation. Featuring panoramic tempered glass side panels, modular component support, and next-generation connectivity, it provides an impressive platform to display your hardware and creativity. With an integrated PCIe 5.0 riser and ARGB spotlights, it is ready to shine straight out of the box. Introducing the first 360-degree showcase case on the market—specially developed for open-loop liquid cooling. Create a complete cooling loop around your system, with dedicated space and mounting options allowing tubes to run around all sides like a custom roller coaster. Display your setup—and your collectible items—from every angle with ultra-clear tempered glass panels on three sides. Like a 360-degree display case, it showcases every detail of your components and figures with stunning clarity. Whether you want to highlight an open-loop liquid cooling system or custom hardware configurations, this case transforms your rig into a breathtaking centerpiece with story and style. The mirrored front platform allows you to display your favorite collectibles, figures, or themed accessories, merging your personal style with your system's aesthetics. Combined with the forward-facing ARGB effects, your setup becomes a vibrant and playful showcase. To deliver outstanding thermal performance, the case supports fan sizes from 120 mm to 200 mm and accommodates up to twelve 120 mm fans—six at the top and six at the bottom. It also supports radiators up to 360 mm in length, meeting the cooling requirements of high-end, custom liquid cooling setups. Compatible with Mini-ITX, Micro-ATX, and ATX motherboards, including BTF (Back-Connect) layouts within the ATX form factor. The case accommodates GPUs up to 430 mm in length and PSUs up to 210 mm, designed to support flagship components without compromise. Additionally, it features a USB 3.2 Gen 2x2 Type-C (up to 20G) port and 2x USB 3.2 Gen 1 Type-A ports (up to 5G).
Das ENDORFY Signum M30 Air ist ein kompaktes microATX-Gehäuse mit vielseitigen Konfigurationsmöglichkeiten. Das luftige Design mit Mesh-Front, drei vorinstallierten Stratus 120 PWM-Lüftern und Staubfiltern hilft dabei, stabile Temperaturen zu halten. Das Seitenteil aus gehärtetem Glas sowie der schnelle USB-C-Anschluss unterstreichen den modernen Charakter des Gehäuses. Das Signum M30 Air wurde für eine effiziente Kühlung der Komponenten entwickelt. Die vordere Mesh-Front wird von zwei vorinstallierten Lüftern unterstützt, was für einen ungehinderten Luftstrom ins Innere sorgt. Die warme Luft wird durch den hinteren Lüfter sowie den perforierten oberen Bereich des Gehäuses effektiv abgeführt, was stabile Temperaturen im Betrieb unterstützt. Das Gehäuse bietet Platz für bis zu sieben 120-mm-Lüfter. Zwei magnetische Staubfilter sowie die Mesh-Front, die ebenfalls als Staubfilter fungiert, lassen sich werkzeuglos abnehmen und leicht reinigen. Im Lieferumfang des Signum M30 Air sind drei werkseitig montierte Stratus 120 PWM-Lüfter enthalten, die an einen vorinstallierten PWM-Splitter angeschlossen sind. Dadurch reicht ein einzelner 4-Pin-PWM-Anschluss aus, um die Lüfter über das Mainboard zu steuern. Die gemeinsam mit Synergy Cooling entwickelten Lüfter verbinden hohe Leistung mit leisem Betrieb. Das hochwertige FDB-Lager sorgt für eine lange Lebensdauer, während die PWM-Steuerung eine präzise Regelung der Drehzahl ermöglicht – inklusive Fan-Stop-Modus. Das Seitenteil aus gehärtetem Glas verleiht dem Gehäuse ein modernes Erscheinungsbild und setzt die verbauten Komponenten gekonnt in Szene. Der Raum hinter dem Mainboard-Tray sowie sinnvoll platzierte Kabeldurchführungen und Befestigungspunkte für Kabelbinder erleichtern eine saubere Kabelführung. Eine ordentliche Verlegung der Kabel verbessert nicht nur die Optik im Inneren, sondern unterstützt auch einen besseren Luftstrom. Das schlanke Zweikammer-Design wurde für microATX-Mainboards konzipiert und ist zudem mit den kleineren Formaten Mini-ITX und FlexATX kompatibel. Das Signum M30 Air bietet Platz für moderne Komponenten, darunter lange Grafikkarten mit bis zu 345 mm Länge, leistungsstarke Kühllösungen wie Luftkühler bis 159 mm Höhe sowie 240-mm-Radiatoren. Zusätzlich lassen sich mehrere Datenträger verbauen:zwei 2,5"- und zwei 3,5"-Laufwerke. Vier Erweiterungsslots mit verschraubbaren Slotblenden erleichtern die individuelle Konfiguration des Systems. Auf der Oberseite des Gehäuses befindet sich ein funktionales I/O-Panel für den schnellen Zugriff auf häufig genutzte Anschlüsse. Zur Verfügung stehen zwei USBA 3.2 Gen 1 Ports, zwei 3,5-mm-Audiobuchsen für Kopfhörer oder Lautsprecher und Mikrofon sowie ein besonders schneller USB-C 3.2 Gen 2×2 Anschluss mit bis zu 20 Gbit/s. So kannst du moderne Geräte und Zubehör bequem anschließen –ganz ohne Adapter.
The Grandia GD04 is an incredible product that combines years of SilverStone's expertise in SFF (Small form factor) and HTPC (Home Theater Personal Computer) chassis design. It has a beautifully proportioned exterior and powerful thermal capability that rivals the best tower chassis. From the front, the GD04 is shaped similarly to most home theater components, but the depth was reduced to a mere 323mm. This overall size of 21.5 liters in volume actually makes the case one liter smaller than SilverStone’s own Micro-ATX Sugo cases! Even though GD04’s diminutive size allows it to easily integrate into any home theater cabinet, it can still accommodate an impressive list of standard components such as 5.25” optical drive, two 3.5” hard drives, a 2.5” SSD, a standard ATX power supply, and two high-end graphics cards up to 11 inches. Cooling duty in the GD04 is handled by three filtered 120mm fans designed with the same positive air pressure as the Fortress FT01, this enables class-leading cooling efficiency, reduced dust buildup, and silent operation. To make installation simpler, there is even enough space for cable management to be easily accomplished without the need for short cabled or modular power supply. Coupled with the special attention given to the order of installation, any user can quickly assemble or upgrade the GD04 and devote more time to enjoying a personalized digital life with an HTPC.Format microATXMaximum graphics card lenght 279 mmMaximum CPU-Cooler Height 75 mmSpecial Featuress Luftöffnungen an der Oberseite and an der Seite, three 120-mm-Fan an den Seiten, Luftöffnung for ein Netzteil an der Unterseite, Vibrationsdämpfer for die Festplatten, ein Netzteil with einer Länge von up to180 mm einbaubarPower Supply SlotDesign ATXDrive Baysexternal 5,25 inches 1internal 3,5 inches 32,5 inches 2FansIncluded 3x 120 mmInstallable 2x 80 mmFront-SideSpecial Featuress Power- and Reset-button, Power-LEDPorts USB 3.0 2Audio 2Back-SideSlots Full-Size 4additional Full-Size 1Product dimensions 440 x
Dimensions: 202 x 438 x 384 mm (W x H x D) Material: steel, acrylic glass, plastic Weight: 3.2 kg Color: Black Form factor: ATX, Micro-ATX, Mini-ITX Fan possible: 3x 120 mm (front) 1x 120 mm (rear) 2x 120 mm (cover) 2x 120 mm (bottom) Fan pre-installed: 1x 120 mm (front) 1x 120 mm (rear) Drives: 2x 3.5 / 2.5 inches (internal) 4x 2.5 inches (internal) Power supply (optional): standard ATX Expansion slots: 7 I / O panel: 1x USB 3.0 2x USB 2.0 1x per audio in / out Maximum graphics card length: 305 mm Maximum power supply length: 150 mm Maximum CPU cooler height: 160 mm
No. of drive bays: 6 MOLEX power connectors: 0 Floppy power connectors: 0 SATA power connectors: 0 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 0 Number of power supply connector 4+4-pin 12V: 0 8-pin 12V power connectors: 0 Weight: 5.8
The CORSAIR 2000D AIRFLOW is a Mini-ITX small-form-factor case with phenomenal cooling thanks to steel mesh front, side, and rear panels that deliver plentiful ventilation to your system.
ANTILA 39 Computer Midi Tower ATX PC Case. The computer case is equipped with three USB ports. The structure of the housing in black color gives elegance and the cable arrangement system allows you to organize the interior. At the top there is a ventilation grille with space for additional 120 mm fans and at the bottom there is a pollen filter.
Zalman T4 PLUS Black The Zalman T4 PLUS Black is a Micro-ATX case with a sophisticated design for efficient cooling and clever space utilization. With its sleek, matte black look, it fits perfectly into any setup—whether home office, gaming, or business PC. Highlights: Optimized air circulation: Pre-installed 120 mm fan at the rear and space for additional fans at the front, top and sides – for reliable cooling. Compact design: Supports Micro-ATX and Mini-ITX motherboards. Ideal for space-saving builds without compromise. Good expandability: space for graphics cards up to 300 mm long and CPU coolers up to 150 mm high. Front ports: 2x USB 2.0, 1x USB 3.0, HD audio – everything at your fingertips. Easy installation: Tool-free mounting for HDDs/SSDs, sophisticated cable management. Whether as an affordable entry-level model or for compact builds – the T4 PLUS offers reliable quality and functionality at a fair price at Aquatuning
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Compared to the D32 PRO, the D32 STD PC case addresses the midrange and budget segment with key features such as back-connect support and minimal front I/O.Elegant and space-saving design for mATX motherboardsSeamless cable management with cutouts for back-connect motherboardsTempered glass side panel provides a subtle appearanceAmple space for cooling solutions allows the installation of high-performance hardwareDust filter protects your hardware from annoying dust particlesThe Jonsbo D32 STD White: Space-saving and subtle case for a wide range of hardwareWhether a midrange HTPC or a high-end PC, builds of all kinds comfortably fit into the D32 STD White from Jonsbo. This minimalistic case accommodates graphics cards up to 365 mm long and CPU coolers up to 164 mm high.Thus, even with the compact design of the case, adequate cooling of your hardware is ensured. In combination with up to six 120 mm fans, or one 120 mm fan and four 140 mm fans, the fans also provide enormous airflow inside the case.No cable clutter with back-connectWith back-connect motherboards such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case is virtually free of visible cable clutter despite having the same footprint.Because most power and connection cables can be connected at the rear of the motherboard, you save time on cable management while still enjoying a clean look inside your case. Combined with the tempered glass side window, the view of your hardware is especially appealing.Powerful cooling in a small spaceTo ensure your high-performance hardware is sufficiently cooled even in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AIO, your hardware will always remain cool, even under load.The dust filter on the bottom and mesh side panel design ensure your hardware stays free of dust and dirt. This keeps your temperatures optimal at all times and helps increase the lifespan of your hardware.
Darkflash DS900WS computer case (black) + 4 fansDarkflash DS900WS is a modern solution for demanding users who value both aesthetics and functionality. The distinctive design with a panoramic design without an A-pillar, equipped with a single transparent glass wall and a wood and metal front, not only looks impressive, but also provides excellent visibility of components. The case is designed to provide optimal cooling, performance and versatility, while offering ease of modification and expansion of computer systems. The kit includes 4 fans.Durability and aestheticsThe Darkflash DS900WS stands out for more than just its looks. It is an enclosure built with durability in mind. The support mechanism and solid construction ensure stability and security for all computer components, which is especially important when expanding the system.Effective coolingEvery computer needs a good cooling system, and the DS900WS provides it without question. The ability to mount up to 10 120 mm fans and a large 360 mm heatsink makes the case ideal for those who expect high performance and reliability, especially during intensive use. In addition, 4 high-performance fans are included, which blend perfectly with the interior of the case.Protection and ease of useThe case is designed to protect the computer's interior from dust, which is important for maintaining cleanliness and performance. In addition, its clever design makes it easy to upgrade and expand components, which is especially useful for users who want to build exactly the system they want.Compatibility and expansionThe Darkflash DS900WS is compatible with a wide range of motherboards, including ATX, M-ATX and ITX, giving users freedom of choice and flexibility in configuring their systems. Additionally, seven PCI slots allow for further expansion and customization of the chassis. ManufacturerDarkflashModelDS900Enclosure typeMidi TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x2Expansion card slots7Max PSU length250 mmMax length of graphics card425 mmMax height of CPU cooler170 mmMax number of fans10 (120 mm) or 2 (140 mm)Fan mounting optionsTop: 120 mm fan x3 or 140 mm fan x2; Rear: 120 mm fan x1; Side: 120 mm fan x3; Bottom: 120 mm x3Water cooling mounting optionsTop: 240 / 360 mm; Side: 240 mmNumber of fans installed4Type of installed fansARGBButtons and controlsPower, Reset, LEDConnectorsUSB 3.0 x1, USB2.0 x2, HD AudioMaterialTempered glass, 0.5 mm SPCC, wood, metalColorblackHeight454 mmWidth218 mmDepth434 mmWeight6.53 kg
