Mounting bracket allows Akasa ITX chassis with Vesa design to be mounted on the wall.The mounting bracket can also work with all kind of VESA mounting device like monitors, LCD TV etc.Toote värvMustMaterjalSPCCKaal215 gLaius134 mmSügavus123 mmKõrgus8,5 mm
Tootekood: SST-TJ04B-E USB 3.0GTIN: 4710713968189Korpused
Introduced in 2004, the TJ04 has been a main stable of SilverStone’s prestigious Temjin series of tower chassis. Its excellent original design needed only a few minor tweaks and improvements over the years to keep up with the demands of modern PC hardware. An important equation in keeping the TJ04 a popular choice among system builders was its understated and classic styling. So in designing the TJ04-E (Evolution), SilverStone engineers kept the exterior styling largely unchanged while vastly improving the internals.The power supply is now bottom-mounted with the ability to accommodate up to four 5.25” drives, nine 3.5” hard drives and six SSDs, raising the bar significantly for storage capacity in a mid tower format. In addition to increased storage capacity, the TJ04-E can also install cards up to 17 inches without the need to remove any hard drive cage, a feat usually accomplished in full towers. To make sure the myriad of component can operate effectively, the TJ04-E includes a custom cooling solution to reduce hard drive temperatures and two custom cables with built-in capacitors to facilitate cable management and improve drive stability.To finish up TJ04-E’s already impressive layout efficiency, design details borrowed from other great SilverStone products such as positive pressure and quick removable filters will enable users to easily maintain consistently high performance for years to come. So it is possible that TJ04-E, like its predecessor, will again be able to outlast many generations of PC builds.- Positive pressure design for effective dust reduction- Support eight expansion slots and extra long graphic cards up to 17 inches- Classically styled 7mm thick aluminum front panel- Quick access and removal for fan filters- Smart backside cable routing design- Motherboard back plate opening for quick CPU cooler assembly- Support up to nine 3.5” hard drives and multiple 2.5” drive slots- Built-in innovative hard drive cooler- Includes two custom SATA cable for improved cable managementFormat AT
The new ITX-6xx line is impressive owning to its modern and timeless design and fit perfectly to modern living areas.The good cooling characteristics of the ITX-601 can be optimized by installing an additional 50mm fan. It supports two 2.5" or hard drives which will be fixed on a removable tray. The option to mount a Slimline DVD offers the opportunity to assemble a compact Multimedia PC.The serial, external 60W power supply makes the offer complete.KujutegurLauaarvutiTüüpPCEmaplaadi toetatud kujuteguridMini-ATXToote värvMustAknagaEi2,5" salvede arv2SobilikKodu/kontorSisseehitatud kõlar(id)EiKaasas toiteplokkJahToiteallikas60 WToiteploki asukohtVälineSATA-ühenduste arv2ATX-toitepistmik (20 + 4 kontakti)JahVälisseadmete (Molex) toitepistmikud (4 kontakti)1Toetatud küljeventilaatorite läbimõõt50 mmToetatud kõvakettasuurused2.5"Laius195 mmSügavus215 mmKõrgus82 mmKaal1,17 kgPakendi laius235 mmPakendi sügavus255 mmPakendi kõrgus120 mmPakendi kaal1,68 kgOptilise seadme tüüpDVD-ROM
Tootja: AKYGA Tootegrupp: arvutikorpus arvutikorpuse tüüp: Frame Ümbrise tüüp (motherboard type): ATX Supported toiteploki standards: ATX external 3,5"sahtleid: 0 external 5,25"sahtleid: 0 external 5,25" väikseid sahtleid: 0 internal 2,5"sahtleid: 1 internal 3,5"sahtleid: 0 intenal 5,25"sahtleid: 0 paigaldatud toiteplokk(ies): Ei maksimum toiteplokke: 2 toiteploki võimsus: andmed puuduvad elektripesade pistikuid Serial ATA: andmed puuduvad ATX toiteploki ühenduspesa tüüp: ei puuduta +12V elektripesa tüüp: ei puuduta I/O Ühendusi: andmed puuduvad ventilaatori kiiruse regulaator: Ei paigaldatud ventilaatoreid: 0 maksimaalne kogus of fans: 4 laius: 390 mm pikkus: 545 mm kõrgus: 420 mm pesade arv korpuses: 6 tk külje õhukanal: Ei tööriistavaba kokkupanek: Ei värv: must Lisaomadused: -Allen screws, button I/O included, -for 6 GPU units Lisainfo: Product Site
Tootja: AKYGA Tootegrupp: arvutikorpus arvutikorpuse tüüp: Frame Ümbrise tüüp (motherboard type): ATX Supported toiteploki standards: ATX external 3,5"sahtleid: 0 external 5,25"sahtleid: 0 external 5,25" väikseid sahtleid: 0 internal 2,5"sahtleid: 1 internal 3,5"sahtleid: 1 intenal 5,25"sahtleid: 0 paigaldatud toiteplokk(ies): Ei maksimum toiteplokke: 2 toiteploki võimsus: andmed puuduvad elektripesade pistikuid Serial ATA: andmed puuduvad ATX toiteploki ühenduspesa tüüp: ei puuduta +12V elektripesa tüüp: ei puuduta I/O Ühendusi: andmed puuduvad ventilaatori kiiruse regulaator: Ei paigaldatud ventilaatoreid: 0 maksimaalne kogus of fans: 8 laius: 390 mm pikkus: 710 mm kõrgus: 420 mm pesade arv korpuses: 8 tk külje õhukanal: Ei tööriistavaba kokkupanek: Ei värv: must Lisaomadused: -Allen screws, button I/O included, -for 8 GPU units Lisainfo: Product Site
Dimensions: 201 x 435 x 435 mm (W x H x D) Material: Steel, Tempered Glass Weight: approx. 5.75 kg Colour: Black Form Factor: E-ATX (up to 279 mm wide), ATX, Micro-ATX, Mini-ITX Total Possible Fans: 3x 120 mm (Front) 2x 120 mm (Top) 1x 120 mm (Rear) Pre-Installed: 1x 120 mm Molex (Front) 1x 120 mm Molex (Rear) Radiator Mountings: 1x 240 mm (Front) 1x 240 mm (Top) Filter: Top, Bottom Drive Bays: 3x 3.5/2.5" (internal) Power Supply: 1x Standard ATX up to 200 mm (optional) Expansion Slots: 7 I/O Panel: 2x USB 2.0 (internal connection) 1x USB 3.0 (internal connection) 1x Audio In/Out Maximum GPU Length: 380 mm Maximum CPU Cooler Height: 160 mm
Internal 2x 2.5 "/ 3.5" (cross, drive rails), 2x 2.5 ", Front I / O 1x USB-A 3.0, 2x USB-A 2.0, 1x headphones, 1x microphone, PCI slots 7, Fan (front) 2x 120mm or 3x 120mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 120mm (optional), Fan (other) 2x 120mm (optional), Radiator sizes 120 / 240mm front, Motherboard up to ATX, Power supply ATX (max 180mm deep), Power supply position below, CPU cooler up to max. 156mm height, Graphic cards up to max. 330mm, Color black, inside black, Dimensions (WxHxD) 189x451x412mm, Volume 35.12l, Weight 4.00kg, Special features cable management, dust filter, W/O PSU
Professional, high quality ABS case designed specifically for the Raspberry Pi 4. The case keeps your device safe whilst maintaining full access to all the pins and ports. Rugged 3-piece ABS construction. Ventilated base for passive cooling. Full access to all ports and pins.
