Midi tower with optimized airflow, mesh front, compatible with up to E-ATX, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels The HAVN BF 360 is perfect for gamers and hardware enthusiasts who want no compromises: robust cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and innovative SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUSpace for up to seven fans or two 360 mm radiatorsCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm clearance – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360HAVN BF 360: Airflow meets styleThe front features a distinctive ribbed mesh that draws in air precisely and reduces flow resistance. An integrated guide with a 135° angle directs fresh airflow straight to the GPU and CPU – for maximum cooling without heat buildup. Flexible mounts for fans or radiators support both air and water cooling solutions.HAVN BF 360 side viewCooling power for your high-end hardwareThe interior accommodates up to seven fans. Alternatively, you can install radiators up to 420 mm at the front. With clearance for CPU coolers up to 195 mm tall and a spacious interior, there is plenty of room for large air coolers or custom water-cooling loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation at peak performance.HAVN BF 360 side rearCompatibility without compromiseThe BF 360 offers ample space for motherboards up to E-ATX (maximum 277 mm wide). It provides a generous 410 mm clearance for graphics cards – perfect for current RTX and Radeon models.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restrictions. Two modular drive trays can accommodate either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you get pre-defined cable routes, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grip edges and a practical pull tab – maintenance and upgrades have never been so effortless.HAVN BF 360 I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C port, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re ready for the future, whether gaming or working.
The HYTE X50 is a stylish mid-tower case designed for demanding PC enthusiasts who want to combine design and functionality. With its innovative internal structure and high-quality workmanship, it is aimed at gamers, streamers, and builders with an eye for detail. Three-chamber layout separates heat sources for optimal airflow Supports up to ten 120 mm RGB fans for immense cooling performance 360 mm radiator support on both the top and bottom for powerful water cooling Panoramic glass side panel showcases your setup Magnetic cable management system for clean builds without effort HYTE X50: Innovative cooling concept with clear separation The HYTE X50 utilizes an intelligent three-chamber design that spatially separates the GPU, motherboard, and power supply. This provides unobstructed airflow, efficiently dissipating heat from the case. Direct airflow to your graphics card keeps it cool even during graphics-intensive games or 3D rendering, ensuring a constant supply of fresh air. Design meets functionality The case impresses with a curved glass side panel that elegantly showcases your system. The clear, symmetrical design is not only eye-catching but also thoughtfully constructed. Radiators up to 360 mm can be installed on the top and bottom, providing space even for high-end water-cooling setups. Modular interior and easy installation Building your system is made extremely simple thanks to well-designed details such as magnetically sealed cable guides, tool-less front and side panels, and flexible mounting options. Additionally, the USB-C port on the front provides lightning-fast access with up to 20 Gbit/s—ideal for modern peripherals and quick data transfers.
Das Inter-Tech ODS-716 für Raspberry Pi 4B ist komplett aus Aluminium gefertigt und bietet, zusammen mit den beiden integrierten Wärmeleitern für CPU und RAM ideale Wärmeleitfähigkeiten. Der Boden und Deckel des Gehäuses werden miteinander verschraubt, was zur Stabilität des gesamten Aufbaus beiträgt.
Kaardus karastatud klaaspaneelid • Eelpaigaldatud PWM jahutusventilaatorid • Õhuvoolule optimeeritud korpuse konstruktsioon • Toetab suuri graafikakaarte ja jahuteid • Ruumikas sisemus ja kaablite haldus
Kaardus karastatud klaaspaneelid • Eelpaigaldatud PWM jahutusventilaatorid • Õhuvoolule optimeeritud korpuse konstruktsioon • Toetab suuri graafikakaarte ja jahuteid • Ruumikas sisemus ja kaablite haldus
Zestaw ekranu LCD Thermaltake to ekskluzywne akcesorium rozszerzające do obudowy Tower 300 i Ceres 330 Hydrangea Blue. Dzięki wyświetlaczowi LCD użytkownicy mogą uzyskać pełną kontrolę nad monitorowaniem wydajności i indywidualnymi efektami za pomocą oprogramowania TT RGB Plus 2.0. Ponadto zestaw ekranu LCD 3,9 cala można łączyć z innymi produktami z serii Thermaltake Ultra, aby zapewnić wyjątkowe wrażenia z korzystania z wyświetlacza LCD. Typ panelu bocznego Kolor czarny EAN 4711475642386 Nr producenta AC-073-OO1NAN-A1 Pasuje do obudowy The Tower 300 / Ceres 330 Hydrangea Blue Interfejs funkcji: Micro USB na Micro USB (9 pinów), Zgodność systemu: Windows 10/11 Wymiary Szerokość: 120,5 mm x Wysokość: 44 mm x Głębokość/Długość: 18 mm
The Silentware Air 2000 ARGB case isn't just another tower, but a carefully considered masterpiece of thermal engineering, designed for the most demanding gaming setups and professional workstations. In a world where modern graphics cards and processors generate ever-increasing heat, the Air 2000 becomes a true oasis of coolness. Its designers have departed from standard conventions, opting for an innovative approach to airflow that sets new standards in the midi-tower category. The focal point of this design is a mesh-patterned front panel, which, combined with an impressive array of seven pre-installed fans, ensures unprecedented airflow from the moment the case is removed from the box. The greatest innovation that sets the Air 2000 apart from the competition is its advanced system utilizing the so-called chimney effect. In addition to traditional front-to-back airflow, Silentware designers have integrated three specialized reverse-flow fans into the bottom of the case. This draws fresh, cool air from the lower chamber and forces it directly onto the graphics card, which is the most thermally stressed component in modern systems. This vertical airflow allows heat to naturally rise to the top where it is efficiently removed, drastically reducing operating temperatures even with the most powerful GPUs available on the market. Space and versatility are other features that make the Silentware Air 2000 an investment in the future of your system. The case is designed to easily accommodate E-ATX motherboards and massive graphics cards up to nearly 40 centimeters long. Whether you favor extreme air cooling or advanced water cooling, the Air 2000 gives you complete freedom of choice. It's one of the few designs in its class that allows for the installation of powerful 420 mm radiators in the front while also providing space for an additional 360 mm radiator at the top. These are ideal conditions for ambitious enthusiasts planning complex, custom liquid cooling loops. The Silentware Air 2000 ARGB is also a feast for the eyes and a prime example of user comfort. All seven fans are equipped with addressable RGB lighting, which can be fully customized and synchronized with the rest of your components using popular systems like AURA Sync or Mystic Light. The tempered glass side panel allows you to proudly showcase your rig's interior, while the intelligent daisy-chain fan system makes cable management easier than ever. By choosing this case, you receive a complete product that combines raw cooling performance with elegant design, giving your components the best possible conditions for breaking performance records. Housing type: Tower black EAN code 4262483960226 Manufacturer number AIR2000BLACK Made in China Midi-Tower Form Factor Motherboard format E-ATX Material: tempered glass, steel Window kit Yes Mesh front Yes Internal dimensions: Maximum plug-in card length 395 mm Supported radiators: Front: 240/360/420 mm, Top: 240/360 mm Internal 3.5-inch drive bays (2 pieces) Full-size slots, 7 pieces Front connectors: 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) Front Panel: 3 x 140mm ARGB RF140 with pre-installed hydrostatic bearing fans Back Panel: 1 x 140mm ARGB RF140 with pre-installed hydro-bearing fan Cable Management Notes, Bottom: 3 x 120mm ARGB RF120 reverse flow fans with pre-installed hydrostatic bearing Lighting: Yes, RGB RGB connectors addressable RGB connector Standard RGB AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling option: Yes Rear Motherboard Connection: Yes Note: The four 140mm and three 120mm fans are connected in series (daisy chain). Therefore, a total of two 4-pin PWM connectors and two 3-pin 5V RGB connectors are required for full motherboard control of all case fans. Capacity 59 liters Dimensions: Width: 23.8 cm x Height: 53.5 cm x Depth/Length: 46.4 cm
The NZXT H6 RGB+ (2026) in the elegant all-black version combines modern design, powerful cooling and impressive RGB lighting in a case that was specially developed for demanding gamers and PC enthusiasts. The striking panoramic glass front with seamless corner glazing offers an impressive view of the installed hardware and makes every system a visual highlight on the desk. Thanks to the innovative dual-chamber layout, the power supply, drives and cables are neatly separated from the main system. This not only ensures a tidy look, but also improves the airflow within the case. The angled front fans direct fresh air specifically to the most important components and ensure efficient cooling of the processor and graphics card, even under high load. The H6 RGB+ is equipped with powerful RGB fans ex works, which ensure an optimal balance of cooling performance and impressive lighting effects. The integrated RGB control enables easy synchronization of the lighting and creates individual color accents that perfectly match your own setup. Generous mesh areas and support for numerous additional fans and large water cooling radiators offer maximum flexibility for powerful gaming and high-end systems. With support for ATX, Micro-ATX and Mini-ITX motherboards as well as enough space for modern high-end graphics cards and powerful CPU coolers, the case is ideal for current and future hardware generations. Thoughtful details such as side panels that can be removed without tools, an integrated cable management system and a GPU support make assembly easier and ensure a professional appearance. Tower case type Color white EAN 5056547209364 Manufacturer no. CC-H62FW-P1 H6 series Midi tower design Motherboard form factor ATX Material steel, tempered glass Window Kit Yes Mesh front Yes Internal dimensions plug-in card length maximum 390 mm Internal dimensions CPU cooler height maximum 165 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 200 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Slots Slots Tool-free Yes Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x F120mm RGB fan pre-installed Notes Cable management: 90 mm, Nylon dust filter: Bottom, Front Right: 1 x F360 mm RGB reverse fan pre-installed, Top: 3 x 120 mm fans can be installed, 2 x 140 mm fans can be installed, Bottom: 1 x F360 mm RGB reverse fan pre-installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: 360 mm (up to 400 mm), back: 120 mm Rear connection of the motherboard Yes Further information The H6 RGB+ comes with pre-installed RGB fans and Control Hub Lite. Accessories included User manual, mounting accessories, Control Hub Lite, 2 x F360 RGB reverse fans, 1 x F120 RGB fan Volume 55 l Dimensions Width: 29.2 cm x Height: 44.8 cm x Depth/Length: 42 cm Weight 9.3kg
We designed the Silentware Core 100 ARGB to make PC building a breeze, even for beginners, eliminating concerns about space, airflow, or cabling. Our standard mesh case comes with four pre-installed Silentware RF120 120mm ARGB PWM fans, ensuring good airflow and effective component cooling. Our front fans are also daisy-chained, allowing for easy connection to the motherboard – no annoying adapters, additional controllers, or software required. Inside, you'll find ample space for your hardware – graphics cards up to 380mm in length and CPU tower coolers up to 165mm in height fit in the Core 100, meaning virtually no limitations on your build. The integrated adjustable graphics card support bracket ensures that even heavy graphics cards (up to 380mm in length) remain perfectly level. The CPU can optionally be cooled with air coolers (up to 165mm height) or an AiO liquid cooling system (radiator up to 360mm). Tower case type color black EAN code 4262483960233 Manufacturer No. CORE100BLACK Made in China Midi-Tower form factor Motherboard form factor ATX Material tempered glass, steel Window Kit Yes Mesh front Yes Internal dimensions: Maximum card length 380 mm Supported radiators (top): 240/280/360 mm 3.5-inch internal drive bays, 1 piece Full-size slots, 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s) Front panel: 3 x 120 mm ARGB PWM fans with hydro bearing pre-installed, alternatively 3 x 140 mm fans can be installed. Rear panel: 1 x 120 mm ARGB PWM fan with hydro bearing pre-installed Notes: Top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed; Power supply cover: 2 x 120 mm fans can be installed Lighting: Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible: Yes Rear motherboard connector: No Volume 50 l Dimensions: Width: 21.5 cm x Height: 49.5 cm x Depth/Length: 46.8 cm
The HYTE Y70 Touch Infinite GUNDAM WING is an exclusive, limited edition premium ATX case co-developed with Bandai Namco to celebrate the 30th anniversary of Mobile Suit Gundam Wing. The unique design combines the iconic aesthetic of Wing Gundam Zero with cutting-edge PC case technology, making each configuration a real eye-catcher in gaming, anime and enthusiast builds. The focus is on the integrated 14.9-inch 2.5K multi-touch display with IPS technology and a 60Hz refresh rate, which can be individually adjusted via HYTE Nexus. Exclusive Gundam Wing animations, high-quality UV prints and thematic design elements give the case a unique collector's edition character. Technically, the special edition is based on the powerful HYTE Y70 Touch Infinite Mid-Tower model with a dual-chamber layout and enormous cooling capacity. The case supports current high-end components, including E-ATX motherboards, vertical 4-socket GPUs up to 422 mm in length, and radiators up to 360 mm in length. The included PCIe 4.0 x16 riser cable ensures a sleek vertical display of the GPU and optimized airflow. With space for up to ten fans, extensive cable management features and a modern design with panoramic glass, the HYTE Y70 Touch Infinite GUNDAM WING is ideal for high-end gaming PCs, show builds and individual creator systems. The combination of performance-oriented design and iconic anime design makes this case a unique highlight for Gundam fans and PC enthusiasts alike.
ELITE 302 LITE High in value and attention to detail, Cooler Master's Elite 302 lite offers users a cost effective, space conscious solution to gaming and computing needs. Elite 302 features a large intake grill to ensure a smooth, and efficient running system. The fully black coating and included PSU cover allows for clean builds that are visually appealing as well as functional. TOOL-LESS INTAKE PANELConstructed with a substantially large, unrestricted intake grill to ensure that the system runs cool and efficiently. The front panel could be easily removed by magnets, making it easier for daily maintenance. LARGE SUPPORT, MINIMIZED FOOTPRINTDespite its compact size, Elite 302 supports up to 365mm graphics cards, 163.5mm CPUCoolers, providing solid potential for future upgrades. VERSATILE THERMAL OPTIONSSupports up to six fans and 280/360mm radiator to ensure that performance is not compromised. BREATHABLE POWER SUPPLY SHROUDThe PSU cover is ventilated on top of the power supply location, allowing actively cooled units to be installed in multiple orientations, while maintaining support for passively cooled power supplies. USB TYPE-C SUPPORTUSB Type C port built into the I/O panel allows multi-purpose, streamlined data transmission.
The SilverStone RM43-324-RS Rackmount Case is the perfect candidate for a mass storage solution in 4U rackmount format. With 24 hot-swap trays, you can expand or replace storage at any time - ideal for a flexible server or high-capacity workstation. Everyone has the dream of a powerful server or a powerful workstation. With this rackmount case from SilverStone you come one step closer to fulfillment: The RM43-324-RS offers a total of 24 hot-swap trays for HDDs and SSDs, a powerful cooling system, space for up to three 2-slot GPUs and large server and workstation motherboards. So that you never lose track of the 24 hard drives that can be installed, each individual tray is equipped with a status LED. This way you can immediately see whether one or more hard drives are refusing to work. There are also separate status LEDs for the network connection and the power status. A conventional mainboard is usually not sufficient for a workstation or server. This case therefore offers enough space for SSI-EEB, SSI-CEB and E-ATX mainboards. This allows you to integrate more RAM and additional storage media and exploit the full performance potential of your hardware. To ensure that your powerful hardware is adequately cooled, this case contains three industrial 120 mm fans with a thickness of a whopping 38 millimeters. Since these are also hot-swappable, you can replace them directly in the event of a defect. Rack type, server enclosure Color black/red EAN 4710679818566 Manufacturer no. SST-RM43-324-RS Made in China Rack design Mainboard form factor ATX, E-ATX, µATX, Mini-ITX, SSI-CEB, SSI-EEB Material aluminum, plastic, SPCC (steel): 1.0mm ~ 1.2mm Internal dimensions plug-in card length CPU cooler height Power supply form factor Height units 3.5 inch drive bays 2.5 inches Slots full size Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Rear 2 x 80mm fans pre-installed Notes Cable management, Internal: 3 x 120 x 38 mm hot-swappable PWM ball bearing fan pre-installed, Max supported weight: 80 kg Rear connection of the mainboard No Feature Supports 24 x 2.5"/3.5" SAS/SATA hard drives/SSD, hot swappable Further information Backplane: 24-port SAS / SATA to Mini SAS HD-SFF-8643 x 6 + SGPIO, Interface: SAS III / II / I, SATA III / II / I Volume 51 l Dimensions Width: 44.2 cm x Height: 17.5 cm x Depth/Length: 66 cm Weight 16.8kg
FULL ATX 3X14CM FANS NOISE ABSOR A new Full-ATX Case with aluminum front panel and great airflow, silence and plenty of space for a whole lot of HDD's and opticals...
Tootekood: SST-GD06B USB 3.0GTIN: 4710713967649Korpused
Building off the successful GD04 and GD05, two chassis models that set benchmarks in 2009, SilverStone created the Grandia GD06 to again raise the expectation enthusiasts have for HTPC (Home Theater Personal Computer) chassis. SilverStone engineering team’s expertise in SFF (Small Form Factor) and HTPC are again in full display with GD06’s expanded capability in storage and cooling performance. These improvements were made with the compact depth maintained (340mm) and exterior visuals enhanced as the GD06 is stunningly beautiful as a computer chassis and fits perfectly in the living room. Its five hard drive storage is augmented by two hot-swappable bays for maximum flexibility while a front door lock and a rear Kensington Security Slot ensure security for the installed drives. Cooling is provided by three 120mm silent fans with filters for exceptional performance, quietness and effective dust prevention. For those in doubt that a small footprint HTPC chassis can be used to build a powerful and fully loaded media server, the Grandia GD06 will change their mind.- Positive air pressure design for excellent cooling/quietness and dust-prevention;- Incredible 340mm depth to fit comfortably inside home theater cabinet;- Designed with cable routing for easy installation;- Support 4 x 3.5” hard drives and 2.5” hard drive or SSD (Solid-state drive);- Support expansion cards up to 11 inches;- Includes two front USB 3.0 ports.Format microATXMaximum graphics card lenght 280 mmMaximum CPU-Cooler Height 70 mmSpecial Featuress 120-mm-Fan in der linken Seite (Fanrecording auch with 80-mm-Fan compatible), two 120-mm-Fan in der rechten Seite, Luftöffnung in der linken Seite and im chassisoberteil, ein CPU-Kühler up to 120 mm Höhe einbaubar wenn ein ODD weggelassen wird, maximale Netzteiltiefe von 150 mm, Netzteil-Ansaug-Luftöffnung im Boden with Staubfilter, es können alternativ auch three 3,5"- and two 2,5"-Festplatten eingebaut werden, Anti-Vibrations-Gummis for eine FestplattePower Supply SlotDesign ATXDrive Baysex
Kompaktes Mini-ITX-Gehäuse mit USB 3.0, Rahmen aus stabilem Stahl, Platz für 30,9 cm lange Grafikkarten, zwei vorinstallierte Lüfter, zahlreiche Luftdurchlässe für Airflow, herausnehmbare Staubfilter
Spacious Micro-ATX case in white, for motherboards up to Micro-ATX, side panel made of Tempered Glass, up to 11x 120-mm fans possible, 2x radiators up to 360 mm possible, graphics cards up to 400 mm in length, dual-chamber design.
XPG INVADER X MID-TOWER CHASSIS INVADER X showcases your build's components and vibrant RGB lighting through bezel-less tempered glass panels. Its sleek design offers convenient visibility, while the magnetic dust filter ensures easy maintenance.
