With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Compared to the D32 PRO, the D32 STD PC case addresses the midrange and budget segment with key features such as back-connect support and minimal front I/O.Elegant and space-saving design for mATX motherboardsSeamless cable management with cutouts for back-connect motherboardsTempered glass side panel provides a subtle appearanceAmple space for cooling solutions allows the installation of high-performance hardwareDust filter protects your hardware from annoying dust particlesThe Jonsbo D32 STD White: Space-saving and subtle case for a wide range of hardwareWhether a midrange HTPC or a high-end PC, builds of all kinds comfortably fit into the D32 STD White from Jonsbo. This minimalistic case accommodates graphics cards up to 365 mm long and CPU coolers up to 164 mm high.Thus, even with the compact design of the case, adequate cooling of your hardware is ensured. In combination with up to six 120 mm fans, or one 120 mm fan and four 140 mm fans, the fans also provide enormous airflow inside the case.No cable clutter with back-connectWith back-connect motherboards such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case is virtually free of visible cable clutter despite having the same footprint.Because most power and connection cables can be connected at the rear of the motherboard, you save time on cable management while still enjoying a clean look inside your case. Combined with the tempered glass side window, the view of your hardware is especially appealing.Powerful cooling in a small spaceTo ensure your high-performance hardware is sufficiently cooled even in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AIO, your hardware will always remain cool, even under load.The dust filter on the bottom and mesh side panel design ensure your hardware stays free of dust and dirt. This keeps your temperatures optimal at all times and helps increase the lifespan of your hardware.
Darkflash DS900WS ATX computer case without fans (White)The Darkflash DS900WS ATX (Advanced Technology eXtended, a standard motherboard format) is a spacious midi tower case that supports ATX, M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format) motherboards, and its interior will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. The case allows the installation of up to 12 120 mm fans and water cooling. This makes the DS900WS ATX suitable for both gaming sets and heavy-duty computers. The tempered glass side panel allows you to expose the computer's interior, and the presence of 7 PCI-E (Peripheral Component Interconnect Express, an interface for expansion cards) slots and space for 4 drives (2x HDD, 2x SSD) gives you ample room for expansion.Compatibility and mounting spaceThe case supports ATX, Micro ATX and ITX format motherboards, with the power supply mounted at the bottom as standard. Inside, you'll find space for two 3.5" HDDs (Hard Disk Drives) and two 2.5" SSDs (Solid State Drives) - giving you ample space for data, system and games. The user can install a graphics card up to 425 mm long and a CPU cooler up to 170 mm high. There are also 7 PCI-E slots, making it easy to expand the kit with additional cards.Advanced cooling systemThe Darkflash DS900WS ATX offers extremely extensive cooling capabilities. The chassis can accommodate up to 12 120 mm fans, allowing for effective temperature management even under intense load. It is also possible to mount water cooling - up to 240 mm in the front and up to 360 mm on the top. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation.Practical portsThe top panel features all the necessary connectors: one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), two USB 2.0 ports, and an HD (High Definition Audio) audio connector for headphones and microphone. In addition, there is a power and reset button, making it easier to use the computer on a daily basis. The whole thing is designed for convenience and quick access to the most important functions.Durable construction and thoughtful interiorThe case is made of 0.5 mm SPCC (Steel, Plate, Cold Rolled, Commercial Quality - cold rolled structural steel), which ensures stability and resistance to damage. Its dimensions are 470 x 218 x 454 mm, making it compact, but still very roomy. The interior is designed in a way that makes it easier to mount components and run cables, resulting in better airflow and a more organized look. In addition, part of the right panel is made of metal mesh, which not only protects the hardware from dust, but also helps air circulation. On the other hand, the top and bottom parts of the case made of mesh further promote ventilation, and their magnetic design ensures quick and convenient installation/removal.Tempered glass and stylish designThe left side of the case features a tempered glass panel to expose the computer's interior - including fan backlighting and components. An additional wood-style accent on the front adds a subtle but original touch. ManufacturerDarkflashModelDS900WS ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installedNo fans installedType of fansINF24TButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorWhiteHeight454 mmWidth218 mmDepth470 mm
Darkflash DS900 Mesh fanless computer case (Black)The Darkflash DS900 Mesh is an ATX (Advanced Technology eXtended, a standard for the size of a motherboard and computer case) case that offers great customization possibilities. It supports the installation of up to 12 fans and cooling of up to 360 mm, effectively reducing the temperature of even the most loaded kit. The spacious interior accommodates large GPUs (Graphics Processing Unit, the graphics card) and tall CPU (Central Processing Unit, the processor) coolers, while the side panel with quick release and the top I/O panel with a USB 3.0 port (Universal Serial Bus, a connector standard used for connecting and charging devices, as well as transferring data) make everyday use easy. The chassis looks sleek and modern, and the mesh back panel ensures quieter and more efficient operation. It's a solid base for an expanded kit - both for gaming and work.Mesh panel - more air, better coolingOne of the main features of the DS900 Mesh chassis is the mesh front panel, which provides very good airflow to the interior. Combined with the side air ducts, it improves circulation and supports the maintenance of low temperatures even when the system is fully loaded. Although the chassis does not include fans from the factory, the design allows the installation of up to 12 120mm fans, giving you full control over cooling. The chassis also supports water cooling - it will accommodate up to 240mm cooling on the front and up to 360mm on the top.Thoughtful rear panel designThe rear panel of the case has not been overlooked. It uses a large steel ventilation mesh, which improves air circulation and protects components, while reducing noise by up to 10%. Such a design also improves cooling efficiency by 15% compared to traditional solutions, which is noticeable with intensive use of the computer.Spacious interior and easy expansionThe Darkflash DS900 Mesh gives you a lot of freedom in mounting components. Inside you can fit a graphics card up to 425 mm long and a CPU cooling up to 170 mm high. With 7 PCI (Peripheral Component Interconnect, a type of connector used to connect expansion cards) slots, it is possible to install larger graphics cards or additional expansion cards. The chassis design itself (470 × 218 × 454 mm) allows for seamless installation of ATX, micro-ATX (Micro Advanced Technology eXtended, a motherboard size standard smaller than the standard ATX) and ITX (Information Technology eXtended, a very compact motherboard standard) motherboards.Convenience of use and easy access to the interiorThe tempered glass side panel opens on a hinge and features a quick release. This allows you to quickly access the interior without having to unscrew screws, which greatly facilitates servicing, upgrades and presentation of the built kit. Inside, you'll also find cable grommets with rubber covers, which help to aesthetically guide cables and increase safety of use.Modern I/O panel and tidinessThe top of the case features a clean, organized panel with the most important connectors. Among other things, there is a USB 3.0 port for fast data transfer and convenient charging of mobile devices. This layout ensures that access to ports is always quick and convenient, no matter where your case is located.Tailored to the gaming workstationA uniform color scheme and a simple yet modernistic design make the DS900 Mesh fit well with both a gaming setup and a more minimalist office. The transparent side panel allows to expose the interior, which will be appreciated by users who focus on aesthetics and order inside the case.Includedmotherboard screws x18power supply screws x6hard drive screws x9copper post x3 (6 pieces installed)fan coverclamp x5fan screws x12copper spacerHD audio support x2USB cap x3USB cap x2Type-C capuser manual ManufacturerDarkFlashModelDS900 MeshHousing typeMidi TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX, bottom mountSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots7Max PSU lengthTop: 360mm, 240mm; Front: 240mmMax length of graphics card425mmMax height of CPU cooler170 mmMax number of fans12Fan mounting optionsTop: 120 mm x3/140 mm x2; Front: 120 mm x3; Side: 120 mm x2; Rear: 120 mm x1; Bottom: 120 mm x3Water cooling mounting optionsFront: 240 mm; Top: 360 mmNumber of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB2.0 x2; USB3.0, HD AudioMaterial0.5 mm SPCCColorBlackHeight470 mmWidth218 mmDepth454 mm
The Phanteks XT M3 impresses with a space-saving design that offers you more than enough room for high-end components. With effective cooling and tidy cable management, the case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact size: Space-saving case for high-end hardware Effective cooling: Space for up to nine fans Large radiator: Supports installation of a 360 mm radiator on the top Tidy build: Room for excellent cable management Back-connect support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini-case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SFF case built for big things. Compatible with high-end graphics cards and motherboards supporting back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports the installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360-mm radiator can be fitted on top if you prefer water cooling. Besides fans and a radiator, the mesh front also ensures very good airflow. This helps prevent hot air from accumulating inside your case. Your new gaming PC with clean cable management Managing cables neatly is not easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also improves airflow. Mini-ITX case built for powerful hardware Even a large graphics card fits in effortlessly—the case offers space for a GPU up to 430 mm in length. Note that you cannot install fans at the front if you use the maximum GPU length. The CPU cooler should not exceed a height of 175 mm, and the power supply should not be longer than 150 mm.
Tootekood: F1 BLACK + 6 FANSGTIN: 4711527006081Korpused
Darkflash F1 computer case (Black) + 6 fansDarkflash F1 is a midi tower computer case created for gamers and custom build enthusiasts. Its modern design with a large tempered glass panel allows to display components in an interesting way and looks great on gaming workstations. It is also distinguished by its spacious interior, which can easily accommodate selected components. It is a combination of elegant design and practical solutions that make assembling and using the computer a real pleasure. The kit also includes six ARGB fans.Spacious interiorDespite its compact size (436 x 240 x 436 mm), the case offers plenty of space for components. It will accommodate graphics cards up to 350 mm in length and CPU coolers up to 200 mm in height. There are also five slots for expansion cards. You can also fit an M-ATX or ITX motherboard and three HDDs or SSDs. So you can easily build both a high-performance gaming PC and a workstation for creative work.Efficient coolingThe Darkflash F1 case supports extensive cooling systems - both air and water. It allows the installation of up to nine fans or a 360/280 mm heatsink. In addition, holes located on the top and rear panels ensure optimal airflow. So you can play dynamic games or use demanding programs without worrying that your computer will overheat! In addition, you will find six ARGB fans in the set, which not only guarantee effective cooling, but also look great - they will give your configuration a unique character.Useful connectors at your disposalA set of useful connectors - two USB-A 3.0 ports, one USB-C port and HD Audio - is located at the bottom of the case. So you can freely connect peripherals, transfer files or use headphones! This makes everyday computer use even more convenient, whether you are gaming, working or streaming.Solid construction and designThe case is made of high-quality SPCC steel with a thickness of 0.8 mm, which guarantees its durability and stability. In addition, tempered glass panels expose the interior, and the whole unit looks extremely modern - a solution that looks great on a gamer's desk and beyond.IncludedComputer caseFan x6 ManufacturerDarkflashModelF1Housing typeMidi TowerSide panelTempered glassMotherboard standardM-ATX, ITXSlots for internal drives3.5" HDD x3, 2.5" SSD x3Expansion card slots5Max PSU length200 mmMax length of graphics card350 mmMax height of CPU cooler200 mmMax number of fans9Fan mounting optionsSide: 120 mm x2; Rear: 120 mm x1/140 mm x1; Top: 120 mm x3/140 mm x2; Bottom: 120 mm x3;Water cooling mounting optionsTop: 360 mm / 280 mmNumber of fans installed6Type of fansARGBButtons and controlsPower, ResetConnectorsUSB-A 3.0 x2, USB-C x1, HD audioMaterial0.8 mm SPCCColorBlackHeight436 mmWidth240 mmDepth436 mm
Tootekood: DY460 BLACK + 4 FANSGTIN: 4711527006142Korpused
Darkflash DY460 computer case (Black) + 4 fansThe Darkflash DY460 case will allow you to build not only a powerful, but also a great-looking computer. It combines tempered glass panels with a vertical dual-chamber layout, so you can install many different components in it and display them in an interesting way. The model allows rear mounting of selected motherboards, provides space for heatsinks up to 360 mm, and has a built-in USB-C 3.2 Gen 2 port. The compact dimensions (452 x 238 x 541 mm) hide a spacious compartment that can accommodate a graphics card up to 400 mm long and CPU cooling up to 185 mm high. In addition, you'll find four ARGB fans included.Unprecedented cooling performanceThe case allows the installation of up to 10 120 mm fans, providing excellent airflow for the most demanding components. It is also possible to install a 360 mm heatsink on the top or 120/240 mm on the rear. Also noteworthy are the numerous ventilation holes. All this means that you can play AAA games or use demanding software without worry - your computer will not overheat. The kit includes four ARGB fans.Wide expansion possibilitiesBuild a computer perfectly suited to your needs. The Darkflash DY460 case allows you to install a graphics card up to 400 mm horizontally or up to 385 mm vertically (using optional mounting accessories, which are not included). You can also accommodate one SSD and two HDDs. In addition, back-connect mounting of ATX and M-ATX motherboards is possible, which simplifies cable management and improves the aesthetics of the entire setup.Useful portsThe built-in USB-C 3.2 Gen 2 port with up to 10 Gbit/s enables lightning-fast data transfers - useful for graphic designers, video editors, photographers and more. In addition, you'll find USB-A 3.0 and HD Audio connectors on the case, as well as Power and Reset buttons. This makes using the computer convenient and hassle-free!Delightful designTempered glass on three sides of the case provides a 330° panoramic view of the computer's interior, perfectly displaying selected components - such as those with RGB backlighting. Such a solution makes each configuration a real desktop ornament. What's more, the case was created from durable 0.8 mm thick SPCC steel and is effectively protected against dust - it will serve you well for many years.IncludedComputer caseFan x4 ManufacturerDarkflashModelDY460Housing typeBig TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x1Expansion card slots7Max graphics card lengthHorizontal mounting: 400 m; Vertical mounting: 385 mm;Max CPU cooling height185 mmMax number of fans10Fan mounting optionsSide: 120 mm x3; Rear: 120 mm x1; Top: 120 mm x3; Bottom: 120 mm x3;Water cooling mounting optionsTop: 360 mm; Rear: 120 mm / 140 mm;Number of fans installed4Type of fansARGBButtons and controlsPower, ResetConnectorsUSB-C 3.2 Gen 2 x1, USB-A 3.0 x1, HD audioMaterial0.8 mm SPCCColorBlackHeight541 mmWidth238 mmDepth452 mm
ATX-korpus • Esi- ja külgpaneel karastatud klaasist • Kahekordne kambristruktuur • Lihtne kaablite haldamine • Mahutab kuni 445 mm pikkuseid graafikakaarte
ASUS ROG Strix Helios II. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Frontventiler installeret: 3x 140 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 250 mm, Dybde: 565 mm, Højde: 591 mm
Mini tower in white, supports up to 7 fans, space for a radiator up to 240mm, motherboards up to mATX, GPU up to 410mm, and CPU cooler up to 171mm in height, supports up to two drives, with a display at the bottom of the front panel The Jonsbo D200 mini case offers you maximum performance in minimal space. Thanks to its compact design, it fits effortlessly on any desk or in your living room without compromising on hardware compatibility. Perfect for anyone looking for a powerful gaming PC in a space-saving format. Black mini tower with panorama design Effective cooling performance thanks to seven fans and radiator up to 240mm Motherboards up to mATX Space for graphics cards up to 410mm and CPU coolers up to 171mm in height Small display on the front to show CPU system data Jonsbo D200: Compact Mini Tower with Tempered Glass on Side and Front The Jonsbo D200 is a mini tower that, despite its small size, offers enough space for powerful hardware. Whether high-end graphics cards or an AiO water cooling system – the possibilities are numerous. Extensive Cooling Options with Fans and Radiators To keep your hardware cool under any load, the Jonsbo D200 can accommodate up to seven fans simultaneously. The top supports three 120mm or two 140mm fans. Three 120mm fans can be installed on the power supply cover, while one additional 120mm fan can be fitted at the rear. An AiO water cooling system can also be easily installed if you prefer to cool your powerful hardware with water cooling. There is space on the top for a radiator up to 240mm. Installing Your Hardware The case provides enough room for powerful gaming hardware. It supports the installation of large graphics cards up to 410mm, so even the latest high-end GPUs from the RTX 5000 series can be installed. Motherboards up to the mATX format are supported. The CPU cooler should not exceed a height of 171mm. To store programs and games, a total of two drives can be installed. CPU Display on the Front The integrated display in the Jonsbo D200 shows you the current temperature of your CPU at all times – for maximum control.
USB 3.0 x 2, Mic x1, Spk x1, White, Mini-Tower, Power supply included No Thermaltake Core V1 Side window, USB 3.0 x 2, Mic x1, Spk x1, White, Mini-ITX, CA-1B8-00S6WN-00
No. of drive bays: 4 Dimensions: 492 x 208 x 471 mm Weight: 8.05 Other features: Fan options:- Front: 3 x 120mm, 2 x 140mm- Top: 1 x 120mm, 1 x 140mm- Rear: 1 x 120mm- Bottom: 1x 120mm
Extrem kleiner digital adressierbarer RGB-LED-Controller von aqua computer, für bis zu 90 LEDs, inkl. 32 cm RGB-LED-Strips mit 15 LEDs, mit internem USB-Kabel
Umrüstkit für gängige Tower-Gehäuse, bestehend aus einem Riser-Kabel und einer PCI-Slot-Blende, für den vertikalen Einbau der Grafikkarte, nicht kompatibel mit Mini-ITX-Gehäusen
Tootekood: OBSERVATORY LITE MESHGTIN: 5999094003491Korpused
Mõõtmed: 190 x 440 x 400 mm (L x K x S) Kasti mõõtmed: 258 x 498 x 440 mm (L x K x S) Materjal: Teras, karastatud klaas, võrk, plastik Pakend: EPE vaht Kaal: u. 5,5 kg Värv: must Kujutegur: ATX, Micro-ATX, Mini-ITX Võimalikke fänne kokku: 3x 120 mm (ees) 2x 120 mm (katus) 1x 120 mm (taga) Eelinstallitud: 3x 120 mm (ees) ARGB LED 1x 120 mm (taga) ARGB LED Radiaatori kinnitus: 1x 280 mm (ees) Filter: katus, põhi Sõidupesad: 2x 3,5 / 2,5 "(sisemine) 3x 2,5 "(sisemine) PSU: 1x tavaline ATX (valikuline) Laienduspesad: 7 I / O-paneel: 2x USB 2.0 (sisemine ühendus) 1x USB 3.0 (sisemine ühendus) 1x heli sisse / välja RGB / lähtestamise lüliti GPU maksimaalne pikkus: 335 mm (AIO kasutamisel 310 mm) Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU pikkus: 180 mm
