No. of drive bays: 4 MOLEX power connectors: 0 Floppy power connectors: 0 SATA power connectors: 0 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 0 Number of power supply connector 4+4-pin 12V: 0 8-pin 12V power connectors: 0 Dimensions: 390 x 205 x 380 mm Weight: 4.5 Other features: Fans included:- Back: 1 x 120mmMounting places for fans:- Front: 3 x 120mm or 2 x 140mm- Top: 2 x 120mm or 2 x 140mm- Back: 1 x 120 mmInstallation places for heat sinks:- Front: 1 x 360mm or 1x 280mm- Back: 1 x 120 mm- Maximum cooling height of the processor: 155mm- Maximum length of the graphics card: 350mm- Maximum length of the power supply: 220mm
Internal 4x 2.5 "/ 3.5" (cross, drive rails), 6x 2.5 "or 3x 3.5", Front I / O 2x USB-A 3.0, 2x USB-A 2.0, 1x microphone, 1x headphones, PCI slots 10 (2x riser card), Fan (front) 2x 140mm, 1400rpm (blue illuminated) or 3x 120mm (optional), Fan (rear) 1x 140mm, 1400rpm (blue illuminated), Fan (top) 3x 140mm (optional), Fan (below) 2x 120mm (optional), Motherboard up to E-ATX, Power supply ATX, Power supply position below, CPU cooler up to max. 190mm height, Graphic cards up to max. 310mm (410mm without HDD cage), Color white, inside white Dimensions (WxHxD) 274x592x577mm, Volume 93.59l, Weight 18.90kg, Special features Cable management, dust filter, glass viewing window, CA-1I7-00F6WN-00
Externally 3x 5.25 ", 1x 3.5", Internal 1x 2.5 "/ 3.5", 2x 3.5 ", Front I / O 1x USB-C 3.0, 2x USB-A 3.0, 2x USB-A 2.0, 1x headphone, 1x microphone, PCI slots 7, Fan (front) 1x 120mm (optional) or 1x 90mm (optional) or 1x 80mm (optional), Fan (rear) 1x 120mm (optional) or 1x 90mm (optional) or 1x 80mm (optional), Motherboard up to ATX, Power supply ATX, Power supply position above, CPU cooler up to max. 155mm height, Graphic cards up to max. 250mm, Dimensions (WxHxD) 185x412x450mm, Volume 34.30l, Weight 4.00kg, w/o PSU
Gembird FORNAX-960B - Torn - micro ATX Product Type: System cabinet Form Factor: Torn värv: must I/O Ühendusi: 2 x USB 3.0 1 x microphone 1 x kõrvaklapid Supported Motherboards: microATX, ITX System Cabinet Features: Translucent side panel Power Device: No toiteplokk Specification Compliance: ATX / PS/2 mõõtmed (WxDxH): 20 cm x 32.5 cm x 35.3 cm kaal: 2.6 kg
Fractal Design Pop Silent - Torn - ATX Product Type: System cabinet Form Factor: Torn värv: must solid I/O Ühendusi: 2 x USB 3.0 Audio sisend Audio joon-out Supported Motherboards: ATX, Mini-ATX, Mini-ITX System Cabinet Features: kaabel management system, toetab 120 mm radiator in rear, PSU dust filters, toetab Kuni 280 mm radiator in front panel Power Device: No toiteplokk (ATX) mõõtmed (WxDxH): 21.5 cm x 47.35 cm x 45.4 cm kaal: 7.3 kg Manufacturer Warranty: 2-year garantii Designed For: Fractal Design Model D, Type D
CORSAIR 3000D RGB mid-tower Tempered Glass Black The CORSAIR 3000D RGB AIRFLOW mid-tower ATX case features intensive airflow powered by three high-performance factory-mounted CORSAIR AR120 RGB fans for superior cooling and fantastic lighting effects. The addition of a tempered glass side panel turns your PC into a state-of-the-art computer technology display. The intelligently laid out interior holds up to 8 x 120mm fans or 4 x 140mm fans. With room for radiators up to 360mm in size, support for 3.5" and 2.5" drives, and support for four-slot graphics cards up to 360mm in length, you can create a high-performance system. The front I/O panel has two USB 3.2 Type A ports and a microphone and headphone jack. Outstanding Cooling Capabilities: Spacious interior holds up to 8 x 120mm cooling fans or 4 x 140mm fans with multiple heatsinks including one 360mm front and one 280mm on top (depending on the height of the memory modules) RAM). A complete mid-tower package: A mid-tower ATX case with a sleek, high-airflow design and three pre-installed CORSAIR AR120 RGB fans for superior cooling and compelling lighting effects. Dedicated graphics card cooling: The case accommodates the latest graphics cards and has two additional 120mm fan mounts on the PSU shroud that allow you to install fans directing the airflow directly to the graphics card. Three-slot graphics support: For an advanced, high-performance computing setup, you can freely install a three-slot graphics card up to 360mm in length into the chassis. Optimized front panel for intensive air circulation: The optimized steel front panel provides powerful airflow in the system for maximum cooling. Tempered glass side panel: Show off your internal components in elegant style All the storage you need: Holds up to 2 SSDs and 2 HDDs.
Full Tower CTE C750 TG ARGB case The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for Centralized Thermal Efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB is a high-end presentation case that allows you to imagine something outside the box. Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE C750 TG ARGB's versatile interior includes two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. Perfect protection against dust There are small details on the top, front, bottom, rear and right side of the housing, removable filters that provide excellent dust protection and can be easily removed for cleaning.
Well-equipped Midi-Tower, front and side panel made of Tempered Glass, left side panel and top with ventilation slots, space for up to 9x 120mm or 6x 140mm fans, GPU length up to 420mm, ARGB strip on the front, up to two power supplies possible
The CORSAIR iCUE LINK 3500X RGB mid-tower case is designed for enthusiasts seeking a high-performance, aesthetically pleasing PC build. With its versatile cooling options, it supports multiple fan and radiator configurations, ensuring that your components stay cool under heavy load. The case is designed to be compatible with a broad range of motherboards, from Mini-ITX to Extended ATX, making it a suitable choice for builders planning to upgrade their system. The elegant tempered-glass panels on the side and front not only allow you to showcase your RGB components but also elevate the overall look of your setup. Additionally, the case features comprehensive dust filtration and high-speed connection options, including USB-C 3.2 Gen 2, making it a suitable contender for gamers and professionals.
Well-equipped Midi-Tower, front and side panels made of Tempered Glass, left side panel and top with ventilation slots, space for up to 9x 120mm or 6x 140mm fans, GPU length of up to 420 mm, ARGB strip on the front, up to two power supplies possible
The Antec FLUX White Midi Tower Case is a stylish and functional choice for your PC build. With a gross weight of 10.07 kg and dimensions of 31.2 cm in width and 57 cm in depth, this case provides ample space for your components. It supports a CPU cooler height of up to 180 mm and a maximum graphics card length of 408 mm, making it suitable for high-performance hardware. The sleek white design and ATX form factor ensure it fits seamlessly into any setup.
Showcase case in black, with curved tempered glass, up to 11x 140 mm fans, space for three 420 mm radiators simultaneously, motherboards up to E-ATX, and GPUs up to 480 mm, includes two PWM fan hubs
Compact dual-chamber midi tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case lid for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 in the front panel
XPG Invader X BTF. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Understøttede diametre for sideventilatorer: 120 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 3.5", SSD-formfaktor: 2.5". Bredde: 245 mm, Dybde: 448 mm, Højde: 485 mm. Pakkevægt: 10,2 kg
