Spacious Micro-ATX case in black, for motherboards up to Micro-ATX, tempered glass side panel, up to 11x 120-mm fans possible, 2x radiators up to 360 mm possible, graphics cards up to 400 mm in length, dual-chamber design.
XPG INVADER X MID-TOWER CHASSIS INVADER X showcases your build's components and vibrant RGB lighting through bezel-less tempered glass panels. Its sleek design offers convenient visibility, while the magnetic dust filter ensures easy maintenance.
Full Tower CTE C750 TG ARGB case The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for Centralized Thermal Efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB is a high-end presentation case that allows you to imagine something outside the box. Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE C750 TG ARGB's versatile interior includes two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. Perfect protection against dust There are small details on the top, front, bottom, rear and right side of the housing, removable filters that provide excellent dust protection and can be easily removed for cleaning.
Tootekood: SKY TWO GX (B)GTIN: 4710562747751Korpused
Elegant airflow case in black by Montech, supports motherboards up to E-ATX, radiators up to 360 mm, tempered glass side panel with hinges, three 140 mm ARGB fans pre-installed.
The Antec FLUX White Midi Tower Case is a stylish and functional choice for your PC build. With a gross weight of 10.07 kg and dimensions of 31.2 cm in width and 57 cm in depth, this case provides ample space for your components. It supports a CPU cooler height of up to 180 mm and a maximum graphics card length of 408 mm, making it suitable for high-performance hardware. The sleek white design and ATX form factor ensure it fits seamlessly into any setup.
Showcase case in black, with curved tempered glass, up to 11x 140 mm fans, space for three 420 mm radiators simultaneously, motherboards up to E-ATX, and GPUs up to 480 mm, includes two PWM fan hubs
White midi-tower with wood decor, extravagant design with panoramic window, for motherboards up to ATX format, exceptionally good airflow, two different motherboard positions, 2x USB-A ports on the I/O panel, with wood front.
Zalman P30 V2 micro-ATX Case with Tempered Glass and Panoramic View - White The Zalman P30 V2 micro-ATX case in elegant white combines a modern design with high functionality, ideal for PC enthusiasts and gamers. The Panoramic View side panel made of tempered glass shows off your components in all their glory and gives the setup a clean, minimalist look. The V2 version comes with optimized features and improved cooling performance for demanding builds. Key features of the Zalman P30 V2 case in white: Panoramic Tempered Glass Side Panel : Provides a complete view of the hardware and showcases it in style. Compact micro-ATX format : Perfect for micro-ATX and mini-ITX motherboards, ideal for powerful builds in a small footprint. Improved cooling performance : Support for multiple fans and water cooling for efficient heat dissipation and reliable operation. Modern white finish : Matches minimalist and bright setups and gives the system a fresh, timeless look. The Zalman P30 V2 case in white is the perfect choice for those who value aesthetics and efficiency. The combination of panoramic view, high-quality tempered glass and the elegant white design make it the ideal choice for sophisticated and style-conscious PC builds.
Tootekood: HERITAGE PRO (W)GTIN: 4710562749175Korpused
Compact Midi-Tower with stylish designNine fans ensure efficient airflow, four 120-mm fans already installedSupport for motherboards up to Micro-ATXSpace for graphics cards up to 370 mm and CPU coolers with a height of up to 170 mmPractical carrying handle for transportThe Montech HERITAGE PRO: Stylish Midi-Tower with ample spaceThe Montech HERITAGE PRO is a Midi-Tower that stands out at first glance with its design. It offers you more than enough space to install your high-end components. Fans ensure very good airflow, which efficiently cools your hardware. Additionally, the tower can even be transported with the practical carrying handle.Efficiently cooled with fans and radiatorsEffective cooling is the most important thing in a high-end PC. That's why up to nine fans can be installed in the Montech HERITAGE PRO. The top can accommodate either three 120 mm fans or two 140 mm fans, while the bottom can accommodate three more 120 mm fans. The back also supports a 120 mm fan, as well as two 120 mm fans on the side. This ensures that your hardware stays cool even in performance-intensive games.For the installation of a custom water cooling system, a radiator up to 360 mm can be installed on the top.Space for your high-end hardwareThe Midi-Tower supports the installation of graphics cards up to a size of 370 mm. Motherboards up to the Micro-ATX format can be accommodated.The CPU cooler should not exceed a height of 170 mm. For storing programs and games, two 2.5-inch drives or one 3.5-inch drive can be installed.
Obudowa do budowy wydajnych komputerów mid tower 5000T Przyciągnij uwagę za pomocą wyjątkowej profilowanej konstrukcji obudowy CORSAIR 5000T, w której możesz zbudować idealny system oparty na płycie głównej z odwróconymi złączami. Elegancka stalowa obudowa o wyjątkowym kształcie Działa z płytami głównymi z odwróconymi złączami Zdejmowane panele przedni i górny z siateczki umożliwiające intensywny obieg powietrza Mieści do 10 wentylatorów 120 mm lub 4 wentylatorów 140 mm oraz kilka radiatorów 360 mm Czyste płótno - brak fabrycznie zamontowanych wentylatorów i podświetlenia System organizacji okablowania RapidRoute EFEKTOWNE LINIEZrób piorunujące wrażenie za pomocą tej eleganckiej obudowy o wyjątkowym wyglądzie. Rozwiązania ułatwiające budowę komputera pozwalają wykorzystać cały potencjał, aby konstrukcja była tam samo imponująca wewnątrz, jak i na zewnątrz. OGROMNY POTENCJAŁ CHŁODZENIAPrzestronne wnętrze pomieści nawet 10 wentylatorów 120 mm albo 4 wentylatory 140 mm, a także kilka radiatorów o wysokości 60 mm, w tym z przodu lub boku - o rozmiarze 360 mm oraz w górnej części o rozmiarze 360 mm w konfiguracji push/pull. PEŁNA FUNKCJONALNOŚĆTa obudowa ma wszystko, czego potrzeba do budowy bardzo wydajnego komputera. ZDEJMOWANE PANELE PRZEDNI I GÓRNYSiateczkowe panele o wyjątkowej konstrukcji, które można łatwo zdjąć, aby dostać się do środka, umożliwiają intensywny przepływ powietrza. DWA OBSŁUGIWANE BEZNARZĘDZIOWO PANELE BOCZNE NA ZAWIASACHŁatwy dostęp do systemu dzięki panelom na zawiasach: jednemu ze szkła hartowanego, eksponującemu wszystkie komponenty, oraz jednemu ze stali z drugiej strony. SYSTEM PROWADZENIA PRZEWODÓW CORSAIR RAPIDROUTEUmożliwia szybkie i łatwe poprowadzenie przewodów przez obszerny 46-milimetrowy ukryty kanał pod płytą główną. OBSŁUGA PŁYT GŁÓWNYCH Z ODWROTNYMI ZŁĄCZAMISprawdzona pod kątem zgodności z płytami głównymi ASUS BTF, MSI Project Zero oraz Gigabyte Project Stealth, które mają złącza z tyłu, dzięki czemu nie psują widoku przez podłączone kable. PROSTA KONSTRUKCJANowoczesna konstrukcja w popularnym formacie obudowy komputerowej 5000T ma wygodne rozwiązania, które ułatwią Ci pracę. PUDEŁKO NA ŚRUBY WIELOKROTNEGO UŻYTKUDzięki dodanemu w zestawie pudełku, w którym wszystkie potrzebne Ci śruby będą bezpiecznie zamknięte, nie zgubisz już żadnej ważnej śrubki. PRZELOTKI FORMOWANE W DWÓCH CYKLACHDzięki miękkim, gumowym przelotkom wewnętrznym umożliwiającym łatwe przeciąganie kabli oraz twardym gumowym przelotkom zewnętrznym, które pewnie trzymają się na miejscu, możesz uniknąć frustracji podczas instalowania przewodów. ŚRUBY QUICKTURN DO WENTYLATORÓWŚruby do wentylatorów CORSAIR QuikTurn są równie wytrzymałe i bezpieczne jak tradycyjne śruby, dzięki czemu montaż wentylatorów w systemie staje się niezwykle prosty. Przydaje się to, gdy wypełniasz obudowę tej wielkości. WIELE MOŻLIWOŚCI CHŁODZENIAStwórz odpowiedni do swoich potrzeb system chłodzenia dzięki miejscu na 10 wentylatorów 120 mm oraz różnorodnym opcjom montażu dwóch radiatorów o maksymalnym rozmiarze 360 mm. NOWOCZESNY PANEL WEJŚĆ/WYJŚĆ Z PRZODUUmożliwia łatwy dostęp do nowoczesnych złączy, w tym do portu USB 3.2 Gen 2 Type-C, 4 portów USB 3.2 Gen 1 Type-A oraz zintegrowanego gniazda audio i mikrofonowego typu jack.
PC case MasterFrame 500 Mesh black The MasterFrame 500 Mesh is a premium open-frame mid-tower chassis built for high-performance components, advanced cooling setups, and limitless customization. Embracing the FreeForm 2.0 design philosophy, it supports ATX to E-ATX motherboards and provides full access to modular design files. With enhanced mesh panels for improved airflow, it empowers builders, modders, and creators to push the boundaries of PC design.
MasterFrame 500 Mesh Premium open-frame ATX case designed for modular builds, extreme cooling, and total customization through the FreeForm 2.0 platform. MasterFrame 500 MeshThe MasterFrame 500 Mesh is a premium open-frame mid-tower chassis built for high-performance components, advanced cooling setups, and limitless customization. Embracing the FreeForm 2.0 design philosophy, it supports ATX to E-ATX motherboards and provides full access to modular design files. With enhanced mesh panels for improved airflow, it empowers builders, modders, and creators to push the boundaries of PC design. Versatile & Maker-DrivenIts open source design and interchangeable panels offer endless personalization possibilities, transforming your chassis into a unique expression of style. Flexible Motherboard SupportSupports Mini-ITX to E-ATX motherboards, offering compatibility with a wide range of builds and configurations. Extensive Cooling SupportCan house up to eight fans and multiple radiator sizes (up to 360mm), ensuring superior thermal performance. Ample GPU ClearanceAccommodates graphics cards up to 390mm, offering plenty of space for high-end GPUs. Tool-Free Panel RemovalEasily remove side panels and other components without tools for quick access and modifications during build or upgrades. Included GPU support bracketThe included GPU support bracket prevents GPU sag and ensures stability during intense gaming or high-performance workloads, maintaining a clean and secure build.
The CORSAIR AIR 5400 RS‑R ARGB is designed for PC enthusiasts who want to combine maximum cooling performance with stylish design. It features a sophisticated three-chamber design that specifically isolates hot components for optimal thermals. The three chambers ensure targeted airflow: GPU, CPU, and power supply operate separately – for consistently low temperatures. The three pre-installed RS‑R ARGB fans use reverse rotor technology, delivering strong airflow with elegant ARGB lighting. Curved tempered glass doors provide an unobstructed view of your hardware and open smoothly with hinges – perfect for showcasing your build. The modern front I/O panel is equipped with both USB-C and USB Type-C ports, offering convenient access for modern peripherals. RapidRoute 2.0 significantly simplifies cable management – resulting in a tidy and aesthetically pleasing interior. Three-Chamber Design in Focus Inside, the AIR 5400 separates main components into three clearly defined areas. This prevents heat generated by individual hardware segments from spreading to others – ensuring stable performance even under full load. Performance & Airflow The GPU chamber receives efficient cool air intake through dual air channels, while the CPU chamber offers enough space for large coolers. The result is a continuous, powerful airflow and low temperatures, even in overclocked systems. Design & User-Friendliness The curved glass panels and thoughtful cable management make the case not only high-performing, but also visually appealing. Even complex builds remain organized and clean – perfect for show setups or streaming builds.
DIMENSIONS : (D)420mm X (W)269.5mm X (H)380mm MOTHERBOARD : E-ATX (Max 280 mm wide)/ATX/ Micro-ATX/ Mini-ITX PSU : SFX/ SFX-L MATERIAL : Steel 4 mm Tempered Glass 2mm Aluminum (top and left panel) FAN SUPPORT : Top: 3x 120mm or 2x 140mm Side: 2x 120mm or 2x 140mm Bottom: 3x 120mm or 2x 140mm Rear: 1x 120mm RADIATOR SUPPORT : Top: 360mm or 280mm or 240mm radiator Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator GPU LENGTH CLEARANCE : 395mm CPU COOLER HEIGHT CLEARANCE : 170mm VGA Length : 370mm DRIVES : Right side 2 x 2.5″ SSD + back plate 2 x 3.5″ HDD (or SSD) EXPANSION SLOTS : 3 or 5 or 7 slots (depends on back panel) IO PORTS : 2 x USB 3.0, 1 x USB 3.1 TYPE-C, 1 x HD Audio, Power Button DUST FILTERS : 1 x Top, 1 x Bottom, 2 x Side
No. of drive bays: 4 Dimensions: Product dimension: (L x W x H) 407 x 215 x 455 mm Weight: 5.39 Other features: PCI expension slots: 7 Dust filter: 1 x top, 1 x bottom(PSU), 1 x front Fans control by: Motherboardremote controllerLED buttonVoice control/ Fans included: 4 x 120 mm ARGB, 6 pin, 1200 RPM (3 x front, 1 x rear) connected to the controller Fan support: front: 3 x 120/140 mm lub 2 x 200 mm rear: 1 x 120 mm top: 2 x 120 (140) mm bottom: 2 x 120 mm Watercooling support: front: 1 x 120/240/360 mm rear: 1 x 120 mm top: 1 x 120/240 mm Product dimension: (L x W x H) 407 x 215 x 455 mm Chassis material: SPCC 0.6 mm Front Panel Material: Big hole mesh Net/gross weight: 5.39 / 6.04 kg
