• USB 3.2 Gen 1x1 - USB-A • For two 8,89cm/3,5" SATA hard disk drives • RAID feature (0 / 1 / Large / Normal) • UASP support (Win 8 or higher) • Aluminium body • Fan controller • Chipset for SATA 5 Gb/s (SATA I/II/III) - • Plug‘n‘Play • Nominal data transfer rate: up to 5 Gb/s
This hub converts a single USB 2.0 9-pin header into four fully functional ports. This allows the system to be expanded flexibly—for example with digital cooling solutions, cases, or additional accessory components. The UH-04 is powered conveniently via the included SATA-to-USB Type-C cable with a 90° angled connector. Installation is particularly simple thanks to various mounting options: the UH-04 is magnetic and can be attached at any suitable location. Alternatively, the hub can be mounted in a 2.5" SSD drive bay using the included M3 screws.
Cooler Master Elite 502 Lite computer case (black).The Elite 502 Lite is a premium chassis designed for enthusiasts who want top performance and excellent temperature control. The advanced full mesh front panel guarantees maximum airflow, which helps maintain the ideal climate inside the case even under extreme load. The design is able to accommodate radiators up to 420 mm, powerful graphics cards up to 410 mm in length and back-connector motherboards, which translates into a minimalist look and easier, faster component installation.Thoughtful cable managementThe Elite 502 Lite focuses on order and ergonomics - back-connector motherboard support frees up front space, giving the interior a modern and neat look. With 33-35 mm of space behind the motherboard tray, cable management is intuitive, aesthetically pleasing and allows for perfectly organized components.Professional temperature controlThe case already offers a 120 mm rear fan as standard, which takes care of stable airflow from the very first launch. With the ability to install as many as seven additional 120 mm fans or configurations with three 140 mm fans at the front and three at the top, as well as powerful heatsinks - up to 420 mm at the front and 360 mm at the top - the Elite 502 Lite easily stands up to the most advanced cooling systems, whether air or water.Space for future upgradesThe Elite 502 Lite's design was created with the future in mind. The case will accommodate graphics cards up to 410 mm in length, CPU coolers up to 170 mm, and power supplies up to 210 mm in length (after removing the HDD cage). This is the ideal solution for those planning to expand their computer set-up - without any compromises or space limitations.New generation I/O panelThe top of the case features an I/O panel with a USB 3.2 Gen1 Type-C port, a USB 3.2 Gen1 Type-A port and a universal 3.5mm audio jack. Such a solution guarantees instant connection of modern accessories, convenient data transfer and seamless communication with peripherals.Modularity and purityThe Elite 502 Lite offers a fully removable HDD cage for easy installation and further expansion of the computer. Integrated dust filters located on the top, front and bottom of the case effectively protect the interior from debris, extending the life of components and keeping them in impeccable condition. The sturdy steel construction and tempered glass (TG) side panel emphasize the exclusive character of the case and allow you to fully display your components.Includedcomputer casepre-installed rear fandust filters (top, front, bottom)removable HDD cageset of mounting screwsuser manual ManufacturerCooler MasterModelElite 502 LiteDimensions474 × 230 × 481 mm (with protrusions), 465 × 230 × 465 mm (without protrusions)Capacity49,73 LSupported motherboard formatsITX, Micro-ATX, ATX (with back-connector support), E-ATX (up to 30.5 × 27.7 cm, may limit cable management)Expansion slots73.5" bays22.5" bays2 (max. 6)I/O panel1× USB 3.2 Gen1 Type-A, 1× USB 3.2 Gen1 Type-C, 1× 3.5mm audio comboFan support (front)3× 120 mm or 3× 140 mmFan support (top)3× 120 mm or 3× 140 mmFan support (rear)1× 120 mmPre-installed fans1× 120 mm (rear)Radiator support (front)120 / 140 / 240 / 280 / 360 / 420 mm (limit: 457×140×27 mm)Support for radiators (top)120 / 140 / 240 / 280 / 360 mmSupport for radiators (rear)120 mmMaximum height of CPU cooler170 mmPSU length170 mm, 210 mm (without HDD cage)GPU length360 / 410 mm (without front heatsink)Space for cabling behind the board tray33-35 mmMaterialsSteel (body and right panel), TG tempered glass (left panel)Dust filterstop, front, bottomSupported power suppliesATX
Professional gaming PC case NOCTIS GLASS RGB X1 NOCTIS GLASS RGB X1 a case that combines gaming style with stable performance NOCTIS GLASS RGB X1 is a case designed for gamers who value not only high functionality but also impressive, modern aesthetics.The front panel made entirely of tempered glass highlights the RGB (Red Green Blue) lighting of the fans and creates a minimalist, clean design. Four RGB fans included full 4-pin PWM control The set includes four 120 mm RGB (Red Green Blue) fans they not only look modern but are also highly functional.Thanks to 4-pin PWM (automatic speed control), the system increases fan speed exactly when your processor or graphics card starts working harder. Enhanced AIO cooling system installation wide compatibility In NOCTIS GLASS RGB X1 you have complete freedom to install AIO (All in One) water cooling: on the top, front, rear, and most importantly in the dedicated zone next to the motherboard.This allows you to prepare a setup that best suits your graphics card, processor, and gaming style. NOCTIS GLASS RGB X1 offers extended radiator installation options, including space next to the motherboard. Supported configurations: top: 120 / 240 mm front: 120 / 240 / 280 / 360 mm next to the motherboard: 120 / 240 mm rear: 120 mm This flexible solution lets you tailor the cooling system to your specific hardware configuration. Compatibility with large components no upgrade limitations The case supports CPU coolers up to 170 mm, graphics cards up to 350 mm, and power supplies up to 180 mm (or 230 mm after removing the HDD cage).This means you can choose exactly the GPU and cooling system that delivers the best performance without worrying about fitting issues. Optimized airflow layout up to 10 fans NOCTIS GLASS RGB X1 allows you to configure cooling that fits your style of gameplay: maximum airflow maximum silence perfectly balanced operation With up to 10 fan mounting spots, you have full control over your temperature management. Available positions: 3 × front 2 × top 1 × rear 2 × next to the motherboard 2 × in the PSU chamber This layout makes it easy to achieve the perfect balance between cooling efficiency and acoustic comfort. Compatibility with ATX / mATX / Mini-ITX motherboards The case supports three popular motherboard formats: ATX (Advanced Technology eXtended) full-size, most expandable mATX (Micro ATX) compact but still highly functional Mini-ITX smallest, ideal for compact gaming builds Flexible drive system configuration tailored to the user Adapt your storage configuration to your game library and workflow: more SSDs faster load times and system responsiveness more HDDs more space for projects, recordings, or streaming archives The choice is yours the case supports both setups. NOCTIS GLASS RGB allows installing: 2 × HDD 3.5 + 2 × SSD 2.5or 1 × HDD 3.5 + 3 × SSD 2.5 A practical solution to expand storage for games, video materials, or fast system drives. Case protected with filters and designed for clean airflow The case maintains high airflow while protecting components with two dust filters (top + bottom), helping extend the lifespan of your hardware. The tempered-glass front panel is complemented by additional dust filters: top PSU chamber As a result, the inside of your PC stays clean, and components run longer and more reliably. Ergonomic I/O panel quick access to essential ports The top panel includes: USB-A 3.1 Gen 1 2 × USB-A 2.0 HD Audio The ports are easily accessible, making it convenient to connect USB drives, accessories, or headphones without reaching behind the computer.
The Ubiquiti keystone blank insert is a crucial system accessory for anyone looking to enhance the security and integrity of their desktop computer or server network. Designed specifically to block LAN ports, it prevents unauthorized access through open RJ-45 connectors, ensuring your network remains secure. Made from flame-retardant ABS, this product not only promises durability but also contributes to a safer network environment. Its easy installation process makes it an ideal solution for maintaining a secure and organized network infrastructure. Whether you're managing a small home network or a large server room, the Ubiquiti keystone blank insert is an essential tool for network security.
Neli eelpaigaldatud PWM jahutusventilaatorit • Heliisolatsiooniga külgpaneelid • Võrgust paneel parema õhuvoolu jaoks • Toetab kuni 405 mm pikkuseid graafikakaarte • Esipaneeli USB-C kiire andmeedastus
Kaardus karastatud klaaspaneelid • Eelpaigaldatud PWM jahutusventilaatorid • Õhuvoolule optimeeritud korpuse konstruktsioon • Toetab suuri graafikakaarte ja jahuteid • Ruumikas sisemus ja kaablite haldus
Kaardus karastatud klaaspaneelid • Eelpaigaldatud PWM jahutusventilaatorid • Õhuvoolule optimeeritud korpuse konstruktsioon • Toetab suuri graafikakaarte ja jahuteid • Ruumikas sisemus ja kaablite haldus
The Thermaltake TR100 is an 18.4-liter SFF (Small Form Factor) case packed with many details. The right chamber houses the Mini-ITX motherboard and the SFX power supply, while the graphics card is located in the left chamber and connected to the motherboard via the included PCI-e 4.0 riser cable. Above these essential components is the cooling system: the TR100 can accommodate a 280 mm AIO to dissipate heat from the CPU. All panels are well-ventilated and removable to provide optimal cooling performance in a compact form factor and to simplify the user experience when building a PC system with the TR100. The TR100 has two separately available accessories: the 3.9" LCD screen kit, which can be installed at the front of the TR100, and the TT Traveling Suite Case, which keeps your system protected when gaming on the go wherever you are.
The RM53-502 supports motherboards with a form factor up to SSI EEB and also has a total of 8 PCI expansion slots that can easily accommodate up to 4 server-grade graphics cards. The front-accessible connectors for expansion cards and the design of the I/O components are equipped with interchangeable pull handles and slide rails for this orientation. Inside, there are options in front and rear configurations for interchangeable mounting positions of the 5.25-inch cage and power supply. In line with SilverStone's design philosophy for chassis bays, the RM53-502 is compatible with liquid coolers up to 360 mm in size to improve the cooling performance of server chassis, ensuring efficient heat dissipation and optimal performance. Type Rack case Colour: black EAN 4710679819174 Manufacturer no. SST-RM53-502 Design Rack Mainboard form factor E-ATX, SSI-CEB, SSI-EEB Material Steel Internal dimensions Maximum plug-in card length 454 mm Supported radiators Front: 120/240/360 mm, rear: 120 mm Drive bays 5.25 inch external 2 pieces Slots Full-size 8 Front connections: 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 1 (5 Gbit/s) Front 2 x 80 mm fans included, one additional 80 mm fan can be installed, alternatively 3 x 120 mm fans can be installed Rear I/O: 1 x 140 mm fan included, alternatively 1 x 120 mm fan can be installed Notes Rear fan mount: 2 x 80 mm fans can be installed Water cooling possible Yes Rear connection of the motherboard No Features Removable front panel with security lock, supports two power supplies: PS2 (ATX) + SFX, mini-redundant or 2U CRPS redundant Further information Drive support: External 2 × 5.25" (compatible with 4 × 2.5" or 2 × 3.5"), Internal: 1 × 3.5" (compatible with 2 × 2.5"), 2 × 3.5" (compatible with 1 ×SFX PSU), 5 × 2.5" (two expansion cards occupy the 8th slot) Note For installing a cooler in dual CPU configurations, please refer to the detailed restrictions in the manual Accessories included Manual Volume 51 l Dimensions Width: 44 cm x Height: 22 cm x Depth/Length: 53 cm Weight 11.5 kg
With a 270° panoramic view through seamless tempered glass panels on the front and side surfaces, the Lucid 05 impressively presents your components from almost every angle. The Lucid 05 has a total of 11 fan mounts, ensuring effective air circulation not only for the CPU and GPU, but also for the system and storage drives. The top compartment supports a 360mm water cooling radiator for efficient heat dissipation in high performance systems. With the recent introduction of the RTX 50 series, the Lucid 05 has been designed to support graphics cards up to 410mm in length. Tower case type Color black EAN 4710679818986 Manufacturer no. SST-LD05-B-ARG Midi tower design Motherboard form factor ATX Material steel, plastic, tempered glass Window Kit Yes Internal dimensions plug-in card length CPU cooler height Power supply form factor Power supply length 3.5 inch drive bays 2.5 inches Slots full size Front connections 2x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Front 2 x 80 mm fans can be installed Rear 1 x 120mm ARGB fan pre-installed Notes Integrated 8+8 port ARGB/PWM hub, power supply cover cover: 3 x 120 mm fans can be installed, motherboard compartment: 2 x 120 mm ARGB reverse fans pre-installed, cover: 3 x 120 mm fans can be installed, alternatively 2 x 120 mm fans can be installed Water cooling possible Yes Supported radiators Rear connection of the mainboard No Note When installing two 2.5" SSDs in this position, ensure that the connectors face backwards to avoid interference.[When mounting a 360mm radiator in this position, ensure that the inlet and outlet pipes face forward to avoid interference.[When mounting a 240mm radiator in this position, the distance to the graphics card is 281mm (inclusive). power connectors). Make sure to install the fans between the radiator and the motherboard tray to accommodate this limitation. Volume 46 l Dimensions Width: 22 cm x Height: 49.15 cm x Depth/Length: 42.76 cm
The TR300 WS Mid-Tower Case is an ATX chassis with a front-mounted power supply for optimal space utilization, and supports AIO liquid coolers up to 360 mm for maximum cooling performance. It accommodates up to eight 120 mm fans and supports a radiator up to 360 mm on the top, offering flexible cooling solutions. The case supports Mini-ITX, Micro-ATX, and ATX motherboards; the power supply can be installed at four mounting points within the case, depending on the motherboard size. Maximize the visual effects of your TR300 WS Mid-Tower Case with an upgrade to our LCD screen kit. The 6-inch LCD display allows real-time monitoring and the upload of custom images or GIFs, adding extra flair with the latest TT RGB Plus software. Removable dust filters help keep your system clean while maintaining optimal airflow. For maximum storage compatibility, the case supports up to two 3.5-inch HDDs and three 2.5-inch SSDs for flexible installation.
The NZXT H6 RGB+ (2026) in the elegant all-black version combines modern design, powerful cooling and impressive RGB lighting in a case that was specially developed for demanding gamers and PC enthusiasts. The striking panoramic glass front with seamless corner glazing offers an impressive view of the installed hardware and makes every system a visual highlight on the desk. Thanks to the innovative dual-chamber layout, the power supply, drives and cables are neatly separated from the main system. This not only ensures a tidy look, but also improves the airflow within the case. The angled front fans direct fresh air specifically to the most important components and ensure efficient cooling of the processor and graphics card, even under high load. The H6 RGB+ is equipped with powerful RGB fans ex works, which ensure an optimal balance of cooling performance and impressive lighting effects. The integrated RGB control enables easy synchronization of the lighting and creates individual color accents that perfectly match your own setup. Generous mesh areas and support for numerous additional fans and large water cooling radiators offer maximum flexibility for powerful gaming and high-end systems. With support for ATX, Micro-ATX and Mini-ITX motherboards as well as enough space for modern high-end graphics cards and powerful CPU coolers, the case is ideal for current and future hardware generations. Thoughtful details such as side panels that can be removed without tools, an integrated cable management system and a GPU support make assembly easier and ensure a professional appearance. Tower case type Color black EAN 5056547209357 Manufacturer no. CC-H62FB-P1 H6 series Midi tower design Motherboard form factor ATX Material steel, tempered glass Window Kit Yes Mesh front Yes Internal dimensions plug-in card length maximum 390 mm Internal dimensions CPU cooler height maximum 165 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 200 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Slots Slots Tool-free Yes Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x F120mm RGB fan pre-installed Notes Cable management: 90 mm, Nylon dust filter: Bottom, Front Right: 1 x F360 mm RGB reverse fan pre-installed, Top: 3 x 120 mm fans can be installed, 2 x 140 mm fans can be installed, Bottom: 1 x F360 mm RGB reverse fan pre-installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: 360 mm (up to 400 mm), back: 120 mm Rear connection of the motherboard Yes Further information The H6 RGB+ comes with pre-installed RGB fans and Control Hub Lite. Accessories included User manual, mounting accessories, Control Hub Lite, 2 x F360 RGB reverse fans, 1 x F120 RGB fan Volume 55 l Dimensions Width: 29.2 cm x Height: 44.8 cm x Depth/Length: 42 cm Weight 9.3kg