With the Lian Li O11 Dynamic Mini V2 Flow, you can make your gaming setup a real eye-catcher: Despite its compact design, this mini case offers a spacious interior with enough room to make your visions a reality. Whether you prefer air cooling, water cooling with an AiO, or vertical installation of your graphics card, this case allows all that and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior for installing powerful hardware Clean cable management: Cable holders and support for motherboards with back-connect design for tidy routing Includes GPU brackets: Allows you to install your graphics card both vertically and horizontally Dust protection: Easy-to-clean dust filters at multiple locations Five pre-installed fans: Three 120 mm fans at the bottom and two 120 mm fans on the side with reverse blades The Lian Li O11 Dynamic Mini V2 Flow: Mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 Flow with sample hardware Equipped with tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 Flow allows you to showcase your hardware. Thanks to its compact size, it fits easily on your desk and instantly becomes the centerpiece of your gaming setup—without annoying cable clutter inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable holders, the case allows you to route cables cleanly. An integrated holder for the heavy 24-pin ATX cable ensures it stays neat and secure, while cleverly positioned straps keep all other cables bundled together. The drive cages can also be used to hide your cables. This makes cable management effortless—whether you're a beginner building your first gaming PC or a pro who doesn’t want to spend hours organizing cables. Flexible installation for motherboards and AiO water coolers With a vertically adjustable motherboard standoff, the case gives you more flexibility for installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The upper position allows you to mount 240 mm and 360 mm AiO coolers, while the lower position supports a 280 mm radiator as well. Well cooled even under full load Up to nine fans possible Space for two water cooling radiators Mesh panel on the top Dust filter on the bottom The fans and radiators ensure adequate cooling for your gaming hardware, even under full load. A mesh panel and dust filter help reduce dust buildup inside the case, extending the life of your hardware. Lian Li O11D Mini V2 Flow fans The Flow version of the O11D Mini V2 comes with five fans pre-installed. These 120 mm fans are equipped with reverse blades: so you always have a clean look without sacrificing precious airflow. Ready for top performance with space for large GPUs The case interior is designed so that even large graphics cards up to 400 mm fit comfortably—whether installed horizontally or vertically. The included GPU brackets ensure a secure hold in both scenarios. This gives you the freedom to choose your preferred GPU installation. Supports motherboards with Mini-ITX, mATX, and ATX form factors—including models with rear cable management (back-connect design). Combined with thoughtful cable holders and Velcro straps, this results in a tidy, clean look: All connectors are neatly concealed behind the motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O Panel The I/O panel module can be mounted both on top of the case and at the front bottom. This allows you to position the case exactly as you like while always having easy access to the power button and ports. If you mount the panel on top, the bottom cover is also removable—improving airflow.
The CORSAIR AIR 5400 LX-R RGB PC case is designed for enthusiasts seeking a high-performance case with a clear structure and well-thought-out cooling management. Its innovative three-chamber design deliberately separates hot components from each other, ensuring an organized build. Three separate chambers optimize airflow for the GPU, CPU, and power supply—ideal for powerful builds with high cooling requirements. The iCUE LINK system with pre-installed LX-R RGB fans offers directly controllable lighting and effective cooling right out of the box. Curved tempered glass doors elegantly open to the side, providing easy hardware access and stylish presentation. Compatible with E-ATX motherboards and large graphics cards—perfect for demanding configurations. RapidRoute 2.0 simplifies cable management for clean builds without compromise. Three-chamber design: structure meets cooling performance At the heart of the AIR 5400 LX-R is a thoughtfully designed layout with three thermally separated zones. GPU, CPU cooling, and the power supply all receive individual airflow, lowering temperatures and supporting component longevity. Stylish, systemized access The curved, side-opening tempered glass doors combine elegance with functionality. They offer tool-free access to hardware and clearly showcase your setup—without unsightly cable clutter. Ready for high-end configurations Thanks to iCUE LINK integration, the case comes equipped for intelligent fan control and RGB sync. Radiators up to 360 mm can be installed in all three main zones, while the thoughtful interior easily accommodates even large hardware.
Das View 270 Plus WS ARGB ist mit Hartglasplatten an der Vorder- und Seite des Gehäuses ausgestattet, um optimale Betrachtungswinkel für Ihr System im Inneren zu bieten. Das Gehäuse unterstützt Radiatoren von bis zu 360 mm auf der Oberseite des Gehäuses und kann den Kühldedarf einiger der anspruchsvolleren Systeme decken, während es gleichzeitig ein ansprechendes Erscheinungsbild beibehält, um Ihre Komponenten zur Geltung zu bringen. Das View 270 wird mit drei 120-mm-ARGB-Lite-Lüftern geliefert, von denen zwei seitlich angebracht sind, und ein weiterer an der Rückseite des Gehäuses, um eine Luftabfuhr zu bieten. Daisy-Chain Verbindungen vereinfachen die Verkabelung und die Beleuchtung kann über die Motherboard-Software von Asus, Gigabyte, MSI und ASRock gesteuert werden. Das View 270TG Plus kann bis zu zwei 2,5Zoll-SSDs oder zwei 3,5-Zoll-HDDs unterstützen, an jeweils einem dedizierten Speicherort und jeweils einem gemeinsam genutzten Speicherort. Zwei USB 3.0-Anschlüsse, ein USB 3.2 Gen 2 Typ C und HD-Audio Anschlüsse sind auf der Oberseite angebracht, um bei Bedarf direkten Zugriff zu ermöglichen.
Water cooling The housing is suitable for water cooling installation. At the top of the case there is space for a radiator up to 360 mm. The same size cooler will also fit in place of the factory-installed fans on the front of the case. The same cooler (360 mm) can also be mounted on a dedicated frame of the motherboard wall, but its thickness cannot be greater than 52 mm. At the back, there is space for 120/140 mm water cooling. The introduced solutions are intended to create a real gaming machine for every game. And all this in a solid, airy construction. Without screws The times when you had to unscrew panels are long gone. In the Volcano Expanse case, we offer pleasant and simple solutions so that you can build your dream computer with a smile. All panels are mounted with snaps - you don't need any tools to remove the panel and conveniently install the components. Need to add RAM sticks? Blow out the dust from the interior? You can remove the panels with a smooth movement of your hand without having to unscrew them. Controller The case is equipped with an ARGB fan controller. Thanks to this, you can manage their speed and backlight. A total of 9 fans can be connected. At your fingertips The panel with USB/Audio inputs is placed at the top of the case, giving you convenient access to the connectors when the case is placed under the desk. There are 2 USB 3.0 connectors and one USB-C connector on the panel. Classically, there is also a microphone and headphone input, as well as a power button and fan control. Dust filter There is a dust filter under the power supply. You can easily remove and install the filter, which will keep your computer clean while increasing the efficiency and safety of the power supply and other installed components. It was designed for ease of assembly and disassembly, which is facilitated by structural elements equipped with magnets. Access to the filter is possible both from the front and back of the housing. Dust filters are also installed on the top and side panels. A place for your favorite games There will be plenty of space for your favorite games. The housing allows the installation of two 2.5 drives on the motherboard tray. Additionally, you can install two 3.5 mm in the power supply tunnel. With this amount of disk space, you can easily plan to install new games. Removable caps and vertical GPU mounting All PCI/PCIe expansion card caps are removable. Players will also appreciate the possibility of vertically mounting the graphics card, because the metal frame in which the caps are placed can be unscrewed.
Tootekood: HERITAGE PRO (W)GTIN: 4710562749175Korpused
Compact Midi-Tower with stylish designNine fans ensure efficient airflow, four 120-mm fans already installedSupport for motherboards up to Micro-ATXSpace for graphics cards up to 370 mm and CPU coolers with a height of up to 170 mmPractical carrying handle for transportThe Montech HERITAGE PRO: Stylish Midi-Tower with ample spaceThe Montech HERITAGE PRO is a Midi-Tower that stands out at first glance with its design. It offers you more than enough space to install your high-end components. Fans ensure very good airflow, which efficiently cools your hardware. Additionally, the tower can even be transported with the practical carrying handle.Efficiently cooled with fans and radiatorsEffective cooling is the most important thing in a high-end PC. That's why up to nine fans can be installed in the Montech HERITAGE PRO. The top can accommodate either three 120 mm fans or two 140 mm fans, while the bottom can accommodate three more 120 mm fans. The back also supports a 120 mm fan, as well as two 120 mm fans on the side. This ensures that your hardware stays cool even in performance-intensive games.For the installation of a custom water cooling system, a radiator up to 360 mm can be installed on the top.Space for your high-end hardwareThe Midi-Tower supports the installation of graphics cards up to a size of 370 mm. Motherboards up to the Micro-ATX format can be accommodated.The CPU cooler should not exceed a height of 170 mm. For storing programs and games, two 2.5-inch drives or one 3.5-inch drive can be installed.
Midi tower with optimized airflow, mesh front, compatible with up to E-ATX, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels The HAVN BF 360 is perfect for gamers and hardware enthusiasts who want no compromises: robust cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and innovative SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUSpace for up to seven fans or two 360 mm radiatorsCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm clearance – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360HAVN BF 360: Airflow meets styleThe front features a distinctive ribbed mesh that draws in air precisely and reduces flow resistance. An integrated guide with a 135° angle directs fresh airflow straight to the GPU and CPU – for maximum cooling without heat buildup. Flexible mounts for fans or radiators support both air and water cooling solutions.HAVN BF 360 side viewCooling power for your high-end hardwareThe interior accommodates up to seven fans. Alternatively, you can install radiators up to 420 mm at the front. With clearance for CPU coolers up to 195 mm tall and a spacious interior, there is plenty of room for large air coolers or custom water-cooling loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation at peak performance.HAVN BF 360 side rearCompatibility without compromiseThe BF 360 offers ample space for motherboards up to E-ATX (maximum 277 mm wide). It provides a generous 410 mm clearance for graphics cards – perfect for current RTX and Radeon models.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restrictions. Two modular drive trays can accommodate either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you get pre-defined cable routes, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grip edges and a practical pull tab – maintenance and upgrades have never been so effortless.HAVN BF 360 I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C port, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re ready for the future, whether gaming or working.
Midi tower with airflow optimization, mesh front, compatible up to E-ATX, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels, three pre-installed fans The HAVN BF 360 Flow is ideal for gamers and hardware enthusiasts who demand no compromises: solid cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUThree pre-installed fans: 2x 180 mm & 1x 140 mmCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm space – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360 FlowHAVN BF 360 Flow: Airflow meets styleThe front features a distinctive ribbed mesh that draws in air precisely and reduces flow loss. An integrated guide with a 135° angle directs fresh airflow straight onto the GPU and CPU – providing maximum cooling without heat buildup. Flexible mounts for fans or radiators are included, supporting both air and water cooling solutions.HAVN BF 360 Flow side viewCooling power for your high-end hardwareUp to six fans can be installed. The three pre-installed fans deliver plenty of fresh air right out of the box. Alternatively, radiators up to 360 mm can be mounted at the front and top. With a CPU cooler height of 195 mm and a spacious interior, there’s ample room for large air coolers or custom water cooling loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation, even at peak performance.HAVN BF 360 Flow rear side viewCompatibility without compromiseThe BF 360 offers enough space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm clearance for graphics cards – perfect for current RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restriction. Two modular drive trays can accommodate either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 Flow rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you benefit from pre-routed cables, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grips and a practical pull tab – maintenance and upgrades have never been easier.HAVN BF 360 Flow I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re well equipped for the future, whether you’re gaming or working.
Compact gaming case, made of high-quality steel, for SFX PSUs and Mini-ITX/Micro-ATX motherboards (Intel and AMD), GPU up to 363 mm and 2x 2.5-inch drives.
Darkflash M305 fanless computer case (Black)Darkflash M305 is a meticulously designed Micro-ATX computer case that combines compact dimensions with functionality and futuristic design. It was created for users looking for good value for money, without compromising on airflow, hardware compatibility and aesthetics. A transparent side panel made of tempered glass allows you to effectively display your components, which is sure to be appreciated by fans of RGB backlighting (Red, Green, Blue, a backlighting system based on three colors: red, green and blue) or elegant kits. From now on, your gaming space will look classy and stylish!Practical solutions for everyday useThe case is equipped with a side panel made of tempered glass, fixed with convenient thumb screws. This gives you quick and easy access to the computer's interior, without the need to reach for tools. This solution works great for both hardware upgrades and regular cleaning of the cooling system. The front of the case has a modern, openwork panel with vents, which not only gives the whole case a dynamic character, but most importantly helps air circulation, protecting components from overheating.Efficient cooling systemDarkflash M305 offers a lot of freedom when planning cooling - you can fit as many as 7 120 mm fans inside. Such an arrangement allows you to build a very efficient air cooling system, which translates into stable operation of the processor, graphics card and other components, even during intensive gaming or work on graphics programs. The layout of the fans can be customized to ensure even airflow throughout the case.Compact format, big possibilitiesAlthough the case has small external dimensions (325 × 195 × 387 mm), its interior has been designed for maximum space utilization. It will easily accommodate a graphics card up to 300 mm in length and a CPU (Central Processing Unit, CPU) cooling system up to 160 mm in height. The case supports M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than the standard ATX) and ITX (Information Technology eXtended, an ultra-compact motherboard format) motherboards, allowing you to choose the right configuration for both an office and gaming PC.Thoughtful interior and space for dataInside you'll find a specially designed mounting bracket that allows you to install two SSDs (Solid State Drive, solid state drive) and two traditional HDDs (Hard Disk Drive, hard drive). This arrangement gives you a lot of flexibility in scheduling your operating system, games and data storage. The entire interior has been designed with order in mind - cables can be routed aesthetically, which promotes both appearance and better cooling.Quick access to portsOn the top edge of the case is an intuitive panel of inputs and outputs, including an advanced USB 3.0 connector (Universal Serial Bus, a connector standard for powering and charging electronic devices, as well as for data transfer). It allows fast file transfer and convenient charging of mobile devices. The top location of the ports makes it convenient to use them no matter where the computer stands - on or under the desk.Includedmotherboard screws x12hard drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelM305Housing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPSU standardM-ATX, bottom mountSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots4Max PSU length160 mmMax length of graphics card300 mmMax height of CPU cooler160 mmMax number of fans7Fan mounting optionsRear: 120 mm x1; Top: 120 mm x2; Front: 120 mm x2; Bottom: 120 mm x2Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.45 mm SPCCColorBlackHeight387 mmWidth195 mmDepth325 mm
ASUS Prime AP303 Mesh. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Bagerste ventilatorer installeret: 1x 120 mm, Understøttede diametre for bagerste ventilatorer: 120 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 215 mm, Dybde: 485 mm, Højde: 425 mm. Pakkebredde: 285 mm, Pakkedybde: 571 mm, Pakkehøjde: 465 mm
Three-Chamber Design for Maximum Thermal Performance Dedicated CPU cooling chamber Two airflow channels for efficient circulation in the main compartment Two curved French-door tempered glass panels Compatible with motherboards featuring reversed connectors RapidRoute 2.0 cable management system Three RS-R 120mm PWM ARGB fans with reversed blades THREE IS BETTER THAN TWOTHREE-CHAMBER DESIGN The unique three-chamber layout isolates hot components, providing efficient cooling and peak performance in any situation. Separate chambers for the CPU, GPU/motherboard, and PSU, cables, and storage deliver superior thermals and simplify the building process. WORLD-CLASS ENGINEERINGUNMATCHED PERFORMANCE Designed from the ground up by our world-class engineers, the AIR 5400 case is a masterpiece of precision, performance, and thoughtful design. BIG GRAPHICS CARDS WELCOMEOPTIMAL AIRFLOW TO THE GPU The spacious interior is designed to accommodate even the most powerful graphics cards. Two dedicated airflow channels direct cool air over the GPU for maximum performance. UNLOCK THE VIEWARGB FANS WITH REVERSED BLADES Factory-installed RS-R ARGB 120mm fans with reversed blades at the bottom of the case provide efficient, quiet cooling with stunning, uninterrupted RGB lighting. Fans can be daisy-chained and connected to the motherboards PWM and +5V RGB headers for easy control of lighting and fan speed. STUNNING VISUALSTWO CURVED FRENCH-STYLE GLASS DOORS Two glass panels meet at the corner and swing outward on hidden hinges, offering a seamless appearance and easy access to hardware. ADVANCED CABLE MANAGEMENTRAPIDROUTE 2.0 RapidRoute 2.0 makes cable management effortless. The motherboard tray with a perforated wall allows cable ties to be repositioned easily, keeping your build neat and organized. MULTIPLE COOLING OPTIONS The AIR 5400 comes with three 120mm intake fans with reversed blades at the bottom and provides seven times more space in the CPU chamber, top, and rear, ensuring highly efficient airflow in both chambers. MODERN FRONT I/O PANEL Provides easy access to ports, including a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 1 Type-A ports, and integrated 3.5mm audio and microphone jacks.
With the Lian Li O11 Dynamic Mini V2 Flow, your gaming setup is sure to stand out: Despite its compact design, this mini case offers a spacious interior with enough room to make your vision a reality. Whether you opt for air cooling, an AiO water cooling system, or vertical GPU installation—this case can handle it all and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior allows the installation of powerful components Clean cable management: Cable holders and support for motherboards with back-connect design for tidy cable routing Includes GPU brackets: Graphics card can be installed vertically or horizontally Dust protection: Easy-to-clean dust filters at multiple locations Five pre-installed fans: Three 120 mm reverse-blade fans at the bottom and two on the side The Lian Li O11 Dynamic Mini V2 Flow: A mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 Flow with sample hardware Featuring tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 Flow lets you showcase your hardware. Its compact size allows it to sit comfortably on your desk and become the centerpiece of your gaming setup—all without annoying cable clutter inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable holders, the case enables clean cable routing. A built-in bracket for the heavy 24-pin ATX cable ensures it stays neatly in place, while cleverly positioned straps keep all other cables organized. The drive cages can also double as a hiding spot for cables. This makes cable management effortless—perfect for both beginners building their first gaming PC and pros tired of spending hours on cable routing. Flexible installation for motherboards and AiO water coolers A vertically adjustable motherboard standoff offers you more flexibility when installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The top position supports 240 mm and 360 mm AiO liquid coolers, while the bottom position also allows for a 280 mm radiator. Well cooled, even under full load Supports up to nine fans Space for two water cooling radiators Mesh panel on the top Dust filter on the bottom The fans and radiators provide sufficient cooling for your gaming hardware, even under maximum load. A mesh panel and dust filter help reduce dust build-up inside the case, prolonging the life of your components. Lian Li O11D Mini V2 Flow fans The Flow version of the O11D Mini V2 comes with five fans pre-installed. These 120 mm fans feature reverse blades, ensuring a clean look without sacrificing essential airflow. Ready for peak performance with enough space for large GPUs The interior of the tower is designed to accommodate even large graphics cards up to 400 mm in length—whether mounted horizontally or vertically. The included GPU brackets ensure a secure hold in both scenarios, giving you the freedom to choose your preferred GPU orientation. Supports motherboards in Mini-ITX, mATX, and ATX form factors—including models with rear cable management using a back-connect design. Combined with well-thought-out cable holders and Velcro straps, the result is a tidy, clean look with all cables elegantly routed to the back of the motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O panel The I/O panel module can be attached either on the top or at the bottom front. This lets you place the case wherever you want and still have easy access to the button and ports. If you position the panel on the top, the bottom cover is also removable—improving airflow.
Obudowa do budowy wydajnych komputerów mid tower 5000T Przyciągnij uwagę za pomocą wyjątkowej profilowanej konstrukcji obudowy CORSAIR 5000T, w której możesz zbudować idealny system oparty na płycie głównej z odwróconymi złączami. Elegancka stalowa obudowa o wyjątkowym kształcie Działa z płytami głównymi z odwróconymi złączami Zdejmowane panele przedni i górny z siateczki umożliwiające intensywny obieg powietrza Mieści do 10 wentylatorów 120 mm lub 4 wentylatorów 140 mm oraz kilka radiatorów 360 mm Czyste płótno - brak fabrycznie zamontowanych wentylatorów i podświetlenia System organizacji okablowania RapidRoute EFEKTOWNE LINIEZrób piorunujące wrażenie za pomocą tej eleganckiej obudowy o wyjątkowym wyglądzie. Rozwiązania ułatwiające budowę komputera pozwalają wykorzystać cały potencjał, aby konstrukcja była tam samo imponująca wewnątrz, jak i na zewnątrz. OGROMNY POTENCJAŁ CHŁODZENIAPrzestronne wnętrze pomieści nawet 10 wentylatorów 120 mm albo 4 wentylatory 140 mm, a także kilka radiatorów o wysokości 60 mm, w tym z przodu lub boku - o rozmiarze 360 mm oraz w górnej części o rozmiarze 360 mm w konfiguracji push/pull. PEŁNA FUNKCJONALNOŚĆTa obudowa ma wszystko, czego potrzeba do budowy bardzo wydajnego komputera. ZDEJMOWANE PANELE PRZEDNI I GÓRNYSiateczkowe panele o wyjątkowej konstrukcji, które można łatwo zdjąć, aby dostać się do środka, umożliwiają intensywny przepływ powietrza. DWA OBSŁUGIWANE BEZNARZĘDZIOWO PANELE BOCZNE NA ZAWIASACHŁatwy dostęp do systemu dzięki panelom na zawiasach: jednemu ze szkła hartowanego, eksponującemu wszystkie komponenty, oraz jednemu ze stali z drugiej strony. SYSTEM PROWADZENIA PRZEWODÓW CORSAIR RAPIDROUTEUmożliwia szybkie i łatwe poprowadzenie przewodów przez obszerny 46-milimetrowy ukryty kanał pod płytą główną. OBSŁUGA PŁYT GŁÓWNYCH Z ODWROTNYMI ZŁĄCZAMISprawdzona pod kątem zgodności z płytami głównymi ASUS BTF, MSI Project Zero oraz Gigabyte Project Stealth, które mają złącza z tyłu, dzięki czemu nie psują widoku przez podłączone kable. PROSTA KONSTRUKCJANowoczesna konstrukcja w popularnym formacie obudowy komputerowej 5000T ma wygodne rozwiązania, które ułatwią Ci pracę. PUDEŁKO NA ŚRUBY WIELOKROTNEGO UŻYTKUDzięki dodanemu w zestawie pudełku, w którym wszystkie potrzebne Ci śruby będą bezpiecznie zamknięte, nie zgubisz już żadnej ważnej śrubki. PRZELOTKI FORMOWANE W DWÓCH CYKLACHDzięki miękkim, gumowym przelotkom wewnętrznym umożliwiającym łatwe przeciąganie kabli oraz twardym gumowym przelotkom zewnętrznym, które pewnie trzymają się na miejscu, możesz uniknąć frustracji podczas instalowania przewodów. ŚRUBY QUICKTURN DO WENTYLATORÓWŚruby do wentylatorów CORSAIR QuikTurn są równie wytrzymałe i bezpieczne jak tradycyjne śruby, dzięki czemu montaż wentylatorów w systemie staje się niezwykle prosty. Przydaje się to, gdy wypełniasz obudowę tej wielkości. WIELE MOŻLIWOŚCI CHŁODZENIAStwórz odpowiedni do swoich potrzeb system chłodzenia dzięki miejscu na 10 wentylatorów 120 mm oraz różnorodnym opcjom montażu dwóch radiatorów o maksymalnym rozmiarze 360 mm. NOWOCZESNY PANEL WEJŚĆ/WYJŚĆ Z PRZODUUmożliwia łatwy dostęp do nowoczesnych złączy, w tym do portu USB 3.2 Gen 2 Type-C, 4 portów USB 3.2 Gen 1 Type-A oraz zintegrowanego gniazda audio i mikrofonowego typu jack.
ASUS PRIME AP303 TG White. Type: PC, Produktfarve: Hvid, Understøttet motherboard, formfaktorer: micro ATX, Mini-ITX, ATX. Bagerste ventilatorer installeret: 1x 120 mm, Understøttede diametre for bagerste ventilatorer: 120 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 215 mm, Dybde: 485 mm, Højde: 425 mm. Pakkebredde: 285 mm, Pakkedybde: 465 mm, Pakkehøjde: 571 mm
No. of drive bays: 4 MOLEX power connectors: 2 Floppy power connectors: 1 SATA power connectors: 4 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 0 Number of power supply connector 4+4-pin 12V: 1 8-pin 12V power connectors: 0 Weight: 4.75
be quiet! Dark Base Pro 901. Toote kuju: Full Tower, Tüüp: PC, Toote värv: Must. Toiteploki asukoht: Põhi, Toetatud elektritoite tarne vormi faktorid: ATX. Installitud esiventilaatorid: 2x 140 mm, Toetatud esiventilaatorite ...
Power supply included: No Other features: with USB 3.0 Other features: * Front mesh design provides superior ventilation to maintain constant cooling * Front I/O panel provides easy access for users * Side panel security lock hole for higher security * Side ventilation holes for better cooling performance * Front 120 mm fan provides the best cooling solution Cooling type: Front: 120 x 25mm fan x 1 80mm / 90mm (optional)Rear: 80 / 90 mm fan x 1 (optional)Side: 120 mm fan x 1 (optional) Dimensions (WxDxH): (W) 195 x (H) 370 x (D) 400 mm mm Height: (W) 195 x (H) 370 x (D) 400 mm mm Panel type: USB 3.0 x1, USB 2.0 x 1, Mic x1, Spk x1 Power: Standard ATX PS2 (optional) W Depth: (W) 195 x (H) 370 x (D) 400 mm mm Number of expansion slots: 4 Material: Steel Body ABS plastic Mesh Front bezel Drive bays: 5.25": 1 Exposed 3.5": 2 Hidden, 1 Exposed2.5": 1 Hidden, " Warranty: 24 month(s) Width: (W) 195 x (H) 370 x (D) 400 mm mm Weight: Net Weight: 4.0 kg / 8.84 lbsGross Weight: 5.1 kg / 11.24 lbs g Expansion slots: 4 Colour of product: Black Gross weight: 3.86 kg Net weight: 3.00 kg Form factor: Micro ATX Power supply type: ATX Producer product name: Smarter
Housing type: Midi Tower ATX Motherboard format acceptable: m-ATX, ATX, Extended ATX, mini ITX 5.25 "bays (external) - 3.5 "bays (internal) 3 pcs 2.5 "bays (internal) 4 pcs The number of expansion slots: 7 +3 pcs. USB socket on the front panel: 1 x USB 3.0, 2 x USB 2.0 Front panel microphone jack: 1 piece. Headphone jack on the front panel: 1 piece. Tool-free assembly: No Height: 487 mm Width: 230 mm Depth: 440 mm Number of fans installed: 5 pcs (2x RGB LED front 20 cm., 1x RGB LED rear 14 cm., 2x top 14 cm) Number of places for additional fans: 0 Maximum length of graphics cards: 370 mm The maximum height of the CPU heat sink: 180 mm Water cooling support: Yes (Front: 360mm; Rear: 120mm) Housing color: Black and silver More information: Dust filter x 3 Tempered glass on the side of the housing LED backlight. Removable side panel 90 degree inverted HD cage Bottom mounted power supply. Cable arrangement system Kit contents: Remote control to control the backlight, screws, cable ties.
