Brutokaal: 3.85 kg Netokaal: 3.85 kg Saadetise kogus pakendis: 1 värv: must Audio-Out: 1 USB 2.0: 2 mikrofon: 1 Ümbrise tüüp: MidiTorn (MidiTower) PSU: Not included 3.5" Internal: 3 Cooling & Ventilation System: optional: 1x 92mm on the rear, 1x 120mm on the front, 2x 120mm on the left side panel 5.25" External: 3 2.5" Internal: 1 MicroATX: Jah Pakendi maht: 0.04061 cubm USB 3.0: 2 Saadetise pakendi laius: 21.8 cm Saadetise pakendi sügavus: 40.5 cm Saadetise pakendi kõrgus: 46 cm Saadetise pakendi kaal: 3.85 kg Mudeli nimetus: HO-12B
Spacious Micro-ATX case in black, for motherboards up to Micro-ATX, side panel and front made of Tempered Glass, up to 8x 120-mm fans possible, 2x radiators up to 360 mm possible, graphics cards up to 400 mm in length, dual-chamber design.
Black case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Room for graphics cards up to 460 mm and CPUs up to 170 mm in height Installation of up to nine SSDs enables extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that convinces not only with its wide range of hardware possibilities, but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to receive true admiration. With the LUCA L70, you’re perfectly equipped to assemble your gaming PC exactly as you wish. This midi-tower offers more than enough space to keep your hardware cool, and is also extremely easy to take apart and put back together. Building your high-end setup has never been so easy! Comprehensive cooling options for your new build When building your own PC, cooling is one of the most important factors to consider. The LUCA L70 allows the installation of up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that with this combination, the power supply unit must be mounted on the top of the case. If you prefer mounting the PSU on the bottom, three fans can be installed on the top and only one on the bottom. Water cooling enthusiasts will also not be disappointed: radiators up to 420 mm can be installed in several locations. If the power supply is on the top, only a 240 mm radiator is possible there and a maximum 360 mm radiator on the bottom. If you mount the PSU at the bottom, there is room for a 420 mm radiator on the top as well as on the side. To prevent unnecessary dust buildup inside the case, there are dust filters on the top and bottom. This ensures a much longer lifespan for your hardware and saves you time and annoying cleaning. Thanks to the many options for installing fans and radiators, effective cooling is ensured so your high-end hardware always performs at its peak. In addition, the tower stands 4 mm above the ground on X-shaped legs, which further improves airflow. Case for powerful hardware So you can play even the most demanding games smoothly at high settings, the LUCA L70 accommodates a high-performance graphics card up to 460 mm in length. An included GPU bracket ensures it’s not subject to gravity. Vertical GPU installation is also possible—appropriate accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX with a width of up to 280 mm. To avoid cable clutter, it also supports motherboards with back-facing connectors when the PSU is on top, but only in ATX or micro-ATX format. The CPU height must not exceed 170 mm, and the power supply should be no longer than 190 mm. For plenty of storage for your programs and games, you can attach up to nine 2.5-inch drives to the side of the LUCA L70. Tool-free assembly and disassembly To make installing and swapping hardware as easy as possible, the LUCA L70 is fully modular. The front, side, and other parts can be taken apart and reassembled without any additional tools, plus the motherboard tray can be moved so you can install the motherboard, CPU, and CPU cooler independently.
Showcase your hardware perfectly with the Phanteks Evolv S2 PC case. The spacious panoramic design with glass front and sides always gives you a clear view of your components—ideal for eye-catching builds with RGB lighting and custom water cooling. Black midi-tower with panoramic design Efficient cooling options with up to seven fans and radiator support up to 360 mm Supports motherboards up to E-ATX size with back-connect design Space for graphics cards up to 395 mm and CPU coolers up to 175 mm in height Clean look thanks to hidden cabling Four integrated RGB fans Phanteks Evolv S2: Midi-tower with panoramic design The Phanteks Evolv S2 midi-tower offers the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it’s the ideal choice for gaming and workstation builds. Optimal cooling with fans and radiators To keep your hardware cool under any load, the Phanteks Evolv S2 can accommodate up to seven fans. The top and bottom each support the installation of three 120 mm fans, while the rear can hold a 120 mm fan. To get you started, four 120 mm fans are already pre-installed—three at the bottom and one at the rear. If you prefer water cooling—whether AiO or custom—you can also install a radiator. The top supports a radiator up to 360 mm in size. Installing your hardware The case supports the installation of graphics cards up to 395 mm in length. Motherboards up to E-ATX format are supported. The new back-connect design motherboards are also compatible, allowing for clean cable management and an upgraded setup. The CPU cooler should not exceed 175 mm in height. Up to four drives can be installed to store your programs and games.
The chassis stand for the Tower 600 Light-year Green includes a base cover for the case and a display stand. It allows users to set up their Tower 600 Light-year Green horizontally, making it easy to customize the case and create a unique experience. A dust filter is also attached to the base plate to provide protection against dust. The chassis stand comes with rubber pads to prevent scratching the chassis during installation. The abrasion-resistant material ensures long-lasting protection without affecting the finish of the tower. The small raised sections of the anti-slip design are strategically placed to provide secure grip and prevent unwanted slipping during use.
Das FLP02 kombiniert Retro-inspiriertes Design mit klassisch-beigem Finish, modernen Kühlmöglichkeiten und flexiblen Einbauoptionen. Die klassisch gestaltete Front ist mit der von 5,25"-Floppy-Laufwerken inspirierten Abdeckung für Laufwerke, den ikonischen Reset- und Turbo-Tasten und dem als typischer Kippschalter gestalteten Power-Button genau das Richtige für Retro-Fans. Der Turbo-Knopf sorgt dabei für die sofortige Beschleunigung der Lüfter auf volle Drehzahl, was auch über das LED-Feld angezeigt wird. Drei Lüfter sind im Auslieferungszustand bereits enthalten - weitere Kühlmöglichkeiten lassen sich als Lüfter oder als Radiatoren flexibel hinzufügen. Dabei nimmt das FLP02 CPU-Kühler bis zu einer Höhe von 182 Millimetern auf und unterstützt den Einbau von Steckkarten bis zu einer Länge von 386 Millimetern (nach Entfernung des Laufwerkskäfigs in der Front). Außerdem mit dabei: Eine Halterung für lange GPUs und Unterstützung für Mainboards mit Formfaktor SSI-CEB. Das Schlüsselschloss an der Vorderseite trägt zum Retro-Look bei und verhindert unbeabsichtigtes Ein- und Ausschalten oder Zurücksetzen. Die 5,25"-Einschübe an der Front sind kompatibel mit Hot-Swap-Adapterkäfigen, so dass das FLP02 auch für Server-Builds gut geeignet ist.
Chenbro bietet mit dem RM14300 ein nur 41cm tiefes und sehr hochwertiges 19" Gehäuse mit 1HE, welches für den Einsatz mit mini ITX und micro ATX Mainboards geeignet ist. Das Gehäuse lässt sich auch um 180 Grad gedreht einbauen, so dass die normalerweise rückwärtigen Ports des Mainboards frontseitig erreichbar sind. Neben dem Mainboard können intern im Gehäuse noch bis zu 2 x 3,5" HDDs und 2 x 2,5" HDDs/SSDs verbaut werden. Drei 40mm Turbofan Lüfter von NMB mit bis zu 12.000upm und 4-poligem PWM Anschluss sind bereits im Gehäuse vorinstalliert. Frontseitig sind zwei USB 3.0 Ports verfügbar. Intern lässt sich via optionaler Riserkarte noch eine PCIe Steckkarte mit voller Bauhöhe integrieren.
Das Thermaltake TR100 ist ein 18,4-Liter-SFF-Gehäuse (Small Form Factor), das mit vielen Details aufwartet. In der rechten Kammer befinden sich das Mini-ITX-Motherboard und das SFX-Netzteil, während die Grafikkarte in der linken Kammer untergebracht ist und über das beiliegende PCI-e 4.0 Riser-Kabel mit dem Motherboard verbunden ist. Über diesen wichtigen Komponenten befindet sich das Kühlsystem: Das TR100 ist in der Lage, einen 280 mm AIO zu beherbergen, um die Wärme von der CPU abzuführen. Alle Paneele sind gut belüftet und abnehmbar, um die Kühlleistung in einem kompakten Formfaktor zu bieten, und die Benutzererfahrung beim Aufbau eines PC-Systems mit TR100 zu vereinfachen. TR100 hat zwei separat erhältliche Zubehörteile: das 3,9“ LCD-Bildschirm-Kit das an der Vorderseite des TR100 installiert werden kann, und das TT Traveling Suite Case, das das System sicher schützt, wenn Sie unterwegs spielen wo auch immer Sie sind.
