Darkflash DS900WS ATX computer case without fans (White)The Darkflash DS900WS ATX (Advanced Technology eXtended, a standard motherboard format) is a spacious midi tower case that supports ATX, M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format) motherboards, and its interior will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. The case allows the installation of up to 12 120 mm fans and water cooling. This makes the DS900WS ATX suitable for both gaming sets and heavy-duty computers. The tempered glass side panel allows you to expose the computer's interior, and the presence of 7 PCI-E (Peripheral Component Interconnect Express, an interface for expansion cards) slots and space for 4 drives (2x HDD, 2x SSD) gives you ample room for expansion.Compatibility and mounting spaceThe case supports ATX, Micro ATX and ITX format motherboards, with the power supply mounted at the bottom as standard. Inside, you'll find space for two 3.5" HDDs (Hard Disk Drives) and two 2.5" SSDs (Solid State Drives) - giving you ample space for data, system and games. The user can install a graphics card up to 425 mm long and a CPU cooler up to 170 mm high. There are also 7 PCI-E slots, making it easy to expand the kit with additional cards.Advanced cooling systemThe Darkflash DS900WS ATX offers extremely extensive cooling capabilities. The chassis can accommodate up to 12 120 mm fans, allowing for effective temperature management even under intense load. It is also possible to mount water cooling - up to 240 mm in the front and up to 360 mm on the top. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation.Practical portsThe top panel features all the necessary connectors: one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), two USB 2.0 ports, and an HD (High Definition Audio) audio connector for headphones and microphone. In addition, there is a power and reset button, making it easier to use the computer on a daily basis. The whole thing is designed for convenience and quick access to the most important functions.Durable construction and thoughtful interiorThe case is made of 0.5 mm SPCC (Steel, Plate, Cold Rolled, Commercial Quality - cold rolled structural steel), which ensures stability and resistance to damage. Its dimensions are 470 x 218 x 454 mm, making it compact, but still very roomy. The interior is designed in a way that makes it easier to mount components and run cables, resulting in better airflow and a more organized look. In addition, part of the right panel is made of metal mesh, which not only protects the hardware from dust, but also helps air circulation. On the other hand, the top and bottom parts of the case made of mesh further promote ventilation, and their magnetic design ensures quick and convenient installation/removal.Tempered glass and stylish designThe left side of the case features a tempered glass panel to expose the computer's interior - including fan backlighting and components. An additional wood-style accent on the front adds a subtle but original touch. ManufacturerDarkflashModelDS900WS ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installedNo fans installedType of fansINF24TButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorWhiteHeight454 mmWidth218 mmDepth470 mm
Tootekood: D32 PRO MESH WHITEGTIN: 6970620554358Korpused
With the D32 series, Jonsbo targets anyone wanting to build their PC in a space-saving manner. Unlike the D32 STD, the D32 PRO PC case offers special and practical features like Back-Connect or improved front I/O, making it aimed at the high-end segment. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for Back-Connect motherboards Mesh side panel for a subtle appearance Plenty of space for cooling solutions, allowing for high-performance hardware installation Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Mesh: Space-saving and subtle case for high-end hardware Whether midrange HTPC or high-end PC – the D32 PRO Mesh from Jonsbo comfortably fits a variety of build types. This minimal case accommodates graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In Back-Connect mode, the maximum CPU cooler height is reduced by just under seven millimeters. This means that even with the compact design of the case, adequate cooling for your hardware is ensured. Combined with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the case provides enormous airflow inside. No cable clutter with Back-Connect With Back-Connect motherboards, such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case in B-mode with around six to seven millimeters additional space is almost completely free of visible cable clutter. Because most power and connection cables can be routed to the back of the motherboard, cable management is no longer necessary, and you still get a clean look inside your case. Powerful cooling in a compact space So your high-performance hardware stays adequately cooled in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware will remain cool even under load. Three dust filters on the front, top, and bottom ensure your hardware stays free from dust and dirt. As a result, your temperatures will always be at optimal levels, and the lifespan of your hardware will be extended.
DarkFlash HM1 computer caseDarkFlash HM1 is a midi tower computer case that supports ATX, M-ATX and ITX format motherboards, while offering up to seven 120 mm fan slots and the ability to mount up to 360 mm of water cooling on top of the case. The internal space allows for the installation of graphics cards up to 380 mm in length and CPU coolers up to 175 mm in height. A side panel of curved tempered glass with anti-reflective coating provides a clear view of components, while the modular design and hidden cable routing system facilitate neat installation. The front features high-speed USB 3.0 and USB-C connectors, which translates into convenient support for external devices.Efficient ventilation and support for water coolingThe HM1 chassis supports the installation of up to seven 120mm fans, which translates into efficient cooling even under heavy load. Three fans each can be mounted at the front and bottom, and one (120 or 140 mm) at the rear. The top panel supports water cooling up to 360 mm. This configuration keeps the temperature inside the case stable and minimizes noise.Thoughtful component layoutThe HM1 has been designed to ensure maximum compatibility and easy installation of components. It supports ATX, M-ATX and ITX format motherboards. Inside, space is provided for three HDDs, mounted in the bottom compartment. The motherboard is installed at the rear, allowing for more orderly cable routing and better airflow.Built-in portsOn the front panel, the user has two USB 3.0 ports, a USB-C connector, two audio connectors and a power button. Such a setup makes it easy to quickly connect external devices and operate the hardware.Refined designThe case features a one-piece curved tempered glass panel with high transparency. As a result, the computer's interior remains clearly visible - the manufacturer used nano-AR coating, which reduces reflections to just 3%. The magnetic top panel can be easily removed, making it easy to install fans and clean the case. Modular cable design and a hidden tool compartment make assembling the computer not only convenient, but also aesthetically pleasing. ManufacturerDarkflashModelHM1Housing typeMidi TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXSlots for internal drives3 × HDDExpansion card slots7 × PCIeMax graphics card length380 mmMax CPU cooling height175 mmMax number of fans7 × 120 mmFan mounting optionsTop: 3 × 120 mmRear: 1 × 120 mm or 1 × 140 mmBottom: 3 × 120 mmWater cooling mounting optionsTop: up to 360 mmNumber of fans installedno fans installedType of fansPWM 120 mmButtons and controlsPower buttonConnectors: 2 × USB 3.0; 1 × USB-C; 2 × Audio (headphones and microphone)ColorBlack and whiteHeight450 mmWidth240 mmDepth430 mmWeightapprox. 7.8 kg
Baltimore 530 Mini tower case 1x USB 3.0 + 2x USB 2.0 + HD audio ABS with hair-line & shinny finish Optional: 1 x 80mm at rear, 120mm at front PCI length/CPU cooler height: 270mm/140mm
Darkflash M305 Mesh fanless computer case (White)Darkflash M305 Mesh is a compact M-ATX case that combines futuristic design with practical solutions. It offers a mesh front for better airflow, a tempered glass panel for easy access and presentation of components, the ability to mount as many as 7 fans, support for high-performance graphics cards and CPU (Central Processing Unit, processor) cooling, and a functional I/O panel with a USB 3.0 port (Universal Serial Bus, an interface used for powering and charging devices, as well as for data transfer). Thanks to its well-thought-out design and ample interior space, this model will be perfect for both modern gaming setups and PCs for everyday use.Design and functionalityDarkflash M305 Mesh is an option for those who appreciate minimalist design, functionality and freedom in computer configuration. The front of the case has been made in an industrial style, with a full mesh panel, which first of all provides excellent airflow into the case, but also looks stylish. This solution is especially important for more demanding sets, where proper cooling directly affects the stability of hardware operation.Efficient ventilation and free coolingAlthough the M305 Mesh does not include pre-installed fans, its design has been prepared so that the user can independently select and install up to seven 120mm fans. Such flexibility gives you the opportunity to customize your cooling system - from a basic layout for an office PC to an elaborate gaming setup with advanced cooling. The mesh front not only improves air circulation, but also reduces heat buildup of components even under intense load.Tempered glass for more styleA screw-mounted tempered glass side panel allows you to quickly access the computer's interior without the need for tools. This is especially convenient for frequent kit modifications. At the same time, the transparent panel is great for backlit components, allowing you to expose the computer's interior and create an aesthetically pleasing whole.Compact size that does not limit the possibilitiesThe case supports M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than the standard ATX) and ITX (Information Technology eXtended, a very compact motherboard format) motherboards. Despite its small size (325 × 195 × 387 mm), its interior has been designed for maximum functionality. Inside there will be room for a CPU cooler up to 160 mm high and a graphics card up to 300 mm long. This allows it to accommodate most popular components without worrying about compatibility. The chassis also has room for two SSDs (Solid State Drive, a solid state drive) and two traditional HDDs (Hard Disk Drive, a classic hard drive), giving you plenty of room for storage expansion.Functional I/O panel and modern connectorsThe top of the chassis features a well-placed I/O panel with easy access to the most important ports. The presence of a USB 3.0 connector guarantees fast data transfer and convenient connection of external devices such as flash drives, portable drives or other accessories. The clear layout of the top panel simply makes it more convenient to use the computer on a daily basis.Includedmotherboard screws x12hard drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelM305 MeshHousing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPSU standardM-ATX, bottom of caseSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots4Max PSU length160 mmMax length of graphics card300 mmMax height of CPU cooler160 mmMax number of fans7Fan mounting optionsSide: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1; Top: 120 mm x2.Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.45 mm SPCCColorWhiteHeight387 mmWidth195 mmDepth325 mm
Darkflash DS900WS ATX computer case without fans (Black)The Darkflash DS900WS ATX (Advanced Technology eXtended, a standard motherboard format) is a spacious midi tower case that supports ATX, M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format) motherboards, and its interior will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. The case allows the installation of up to 12 120 mm fans and water cooling. This makes the DS900WS ATX suitable for both gaming sets and heavy-duty PCs. The tempered glass side panel allows you to expose the computer's interior, and the presence of 7 PCI-E (Peripheral Component Interconnect Express, an interface for expansion cards) slots and space for 4 drives (2x HDD, 2x SSD) gives you ample room for expansion.Compatibility and mounting spaceThe case supports ATX, Micro ATX and ITX format motherboards, with the power supply mounted at the bottom as standard. Inside, you'll find space for two 3.5" HDDs (Hard Disk Drives) and two 2.5" SSDs (Solid State Drives) - giving you ample space for data, system and games. The user can install a graphics card up to 425 mm long and a CPU cooler up to 170 mm high. There are also 7 PCI-E slots, making it easy to expand the kit with additional cards.Advanced cooling systemThe Darkflash DS900WS ATX offers extremely extensive cooling capabilities. The chassis can accommodate up to 12 120 mm fans, allowing for effective temperature management even under intense load. It is also possible to mount water cooling - up to 240 mm in the front and up to 360 mm on the top. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation.Practical portsThe top panel features all the necessary connectors: one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), two USB 2.0 ports, and an HD (High Definition Audio) audio connector for headphones and microphone. In addition, there is a power and reset button, making it easier to use the computer on a daily basis. The whole thing is designed for convenience and quick access to the most important functions.Durable construction and thoughtful interiorThe case is made of 0.5 mm SPCC (Steel, Plate, Cold Rolled, Commercial Quality - cold rolled structural steel), which ensures stability and resistance to damage. Its dimensions are 470 x 218 x 454 mm, making it compact, but still very roomy. The interior is designed in a way that makes it easier to mount components and run cables, resulting in better airflow and a more organized look. In addition, part of the right panel is made of metal mesh, which not only protects the hardware from dust, but also helps air circulation. On the other hand, the top and bottom parts of the case made of mesh further promote ventilation, and their magnetic design ensures quick and convenient installation/removal.Tempered glass and stylish designThe left side of the case features a tempered glass panel to expose the computer's interior - including fan backlighting and components. An additional wood-style accent on the front adds a subtle but original touch. ManufacturerDarkflashModelDS900WS ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installedNo fans installedType of fansINF24TButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight454 mmWidth218 mmDepth470 mm
Das APNX V2 ist ein Premium-PC-Gehäuse, das für hervorragende Kühlung, elegante Ästhetik und Anpassungsfähigkeit entwickelt wurde. Seine drei abnehmbaren Hartglasplatten bieten einen rahmenlosen Panoramablick, während das X-Pand Flow Design die Gesamtluftströmungsdynamik erheblich verbessert. Mit Unterstützung für bis zu 10 Lüfter, 360-mm-Kühler und zwei 16-cm-Lüfter an der Unterseite sorgt es für eine erstklassige Wärmeleistung. V2 unterstützt gängige Mainboards mit Reverse-Anschluss für eine übersichtlichere Kabelverwaltung. Funktionen wie eine GPU-Halterung, eine abnehmbare Motherboard-Kabelabdeckung und ein austauschbares PSU/HDD-Fach verbessern die Haltbarkeit und Anpassungsmöglichkeiten. Mit vertikaler oder horizontaler 360-mm-AIO-Montage und Unterstützung für den APNX 10-Port-Lüfter-Hub bietet das APNX V2 effiziente Kühlung und mühelose Anpassungsmöglichkeiten für Hochleistungs-Builds.
Clear lines, strong cooling, uncompromising look: With the Steel Shark, Sharkoon presents a stylish two-chamber ATX case that combines modern design with a particularly tidy look. Tempered glass on the front and side, four pre-installed ARGB PWM fans as well as extensive cooling options and BTF support make the Steel Shark the ideal basis for powerful and visually impressive gaming systems. Thanks to the well-thought-out two-chamber design, the Steel Shark clearly separates hardware and power supply including cable management. This creates an extra tidy look in the main area, while cables, drives and power supply can be discreetly stored at the back. The front and side panels of the Steel Shark are made of tempered glass and provide a clear view of the built-in hardware and the integrated lighting. This makes the case perfect for users who want to present their system not only powerfully, but also visually impressively. The Steel Shark is equipped with four 120 mm ARGB PWM fans ex works. These not only ensure an effective airflow, but also skillfully showcase the system visually. A practical ARGB control and a PWM fan hub with five positions are included! A total of up to eleven fans can be installed in the Steel Shark. In addition, the housing supports the simultaneous installation of two radiators and is therefore also aimed at water cooling enthusiasts who want to cool their system particularly efficiently and quietly. In addition to classic ATX motherboards, the Steel Shark also supports models with a BTF design. The rear connection technology further optimizes cable management and further underlines the clean look of the system. The Steel Shark is also flexible when it comes to selecting powerful hardware: It supports graphics cards with a length of up to 424 mm, CPU coolers with a height of up to 168 mm and power supplies with a length of up to 244 mm. Tower case type Color black EAN 4044951044924 Made in China Midi tower design Motherboard form factor ATX Tempered glass material Window Kit Yes Internal dimensions Plug-in card length maximum 424 mm Internal dimensions CPU cooler height maximum 168 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 244 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Front 3 x 120 mm ARGB-PWM fans pre-installed Back 1 x 120 mm ARGB-PWM fan pre-installed Notes Cable management system, graphics card holder, top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed Lighting Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Water cooling possible Supported radiators Front: 360 mm, Top: 360/280 mm Rear connection of the motherboard Yes Note If the graphics card is longer than 270 mm, there may be conflicts when installing a radiator in the side Accessories available accessory set Volume 59 l Dimensions Width: 28.5 cm x Height: 45.2 cm x Depth/Length: 46 cm
The NZXT H6 RGB+ (2026) in the elegant all-black version combines modern design, powerful cooling and impressive RGB lighting in a case that was specially developed for demanding gamers and PC enthusiasts. The striking panoramic glass front with seamless corner glazing offers an impressive view of the installed hardware and makes every system a visual highlight on the desk. Thanks to the innovative dual-chamber layout, the power supply, drives and cables are neatly separated from the main system. This not only ensures a tidy look, but also improves the airflow within the case. The angled front fans direct fresh air specifically to the most important components and ensure efficient cooling of the processor and graphics card, even under high load. The H6 RGB+ is equipped with powerful RGB fans ex works, which ensure an optimal balance of cooling performance and impressive lighting effects. The integrated RGB control enables easy synchronization of the lighting and creates individual color accents that perfectly match your own setup. Generous mesh areas and support for numerous additional fans and large water cooling radiators offer maximum flexibility for powerful gaming and high-end systems. With support for ATX, Micro-ATX and Mini-ITX motherboards as well as enough space for modern high-end graphics cards and powerful CPU coolers, the case is ideal for current and future hardware generations. Thoughtful details such as side panels that can be removed without tools, an integrated cable management system and a GPU support make assembly easier and ensure a professional appearance. Tower case type Color black EAN 5056547209357 Manufacturer no. CC-H62FB-P1 H6 series Midi tower design Motherboard form factor ATX Material steel, tempered glass Window Kit Yes Mesh front Yes Internal dimensions plug-in card length maximum 390 mm Internal dimensions CPU cooler height maximum 165 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 200 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Slots Slots Tool-free Yes Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x F120mm RGB fan pre-installed Notes Cable management: 90 mm, Nylon dust filter: Bottom, Front Right: 1 x F360 mm RGB reverse fan pre-installed, Top: 3 x 120 mm fans can be installed, 2 x 140 mm fans can be installed, Bottom: 1 x F360 mm RGB reverse fan pre-installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: 360 mm (up to 400 mm), back: 120 mm Rear connection of the motherboard Yes Further information The H6 RGB+ comes with pre-installed RGB fans and Control Hub Lite. Accessories included User manual, mounting accessories, Control Hub Lite, 2 x F360 RGB reverse fans, 1 x F120 RGB fan Volume 55 l Dimensions Width: 29.2 cm x Height: 44.8 cm x Depth/Length: 42 cm Weight 9.3kg
The NZXT H6 RGB+ (2026) in the elegant all-black version combines modern design, powerful cooling and impressive RGB lighting in a case that was specially developed for demanding gamers and PC enthusiasts. The striking panoramic glass front with seamless corner glazing offers an impressive view of the installed hardware and makes every system a visual highlight on the desk. Thanks to the innovative dual-chamber layout, the power supply, drives and cables are neatly separated from the main system. This not only ensures a tidy look, but also improves the airflow within the case. The angled front fans direct fresh air specifically to the most important components and ensure efficient cooling of the processor and graphics card, even under high load. The H6 RGB+ is equipped with powerful RGB fans ex works, which ensure an optimal balance of cooling performance and impressive lighting effects. The integrated RGB control enables easy synchronization of the lighting and creates individual color accents that perfectly match your own setup. Generous mesh areas and support for numerous additional fans and large water cooling radiators offer maximum flexibility for powerful gaming and high-end systems. With support for ATX, Micro-ATX and Mini-ITX motherboards as well as enough space for modern high-end graphics cards and powerful CPU coolers, the case is ideal for current and future hardware generations. Thoughtful details such as side panels that can be removed without tools, an integrated cable management system and a GPU support make assembly easier and ensure a professional appearance. Tower case type Color white EAN 5056547209364 Manufacturer no. CC-H62FW-P1 H6 series Midi tower design Motherboard form factor ATX Material steel, tempered glass Window Kit Yes Mesh front Yes Internal dimensions plug-in card length maximum 390 mm Internal dimensions CPU cooler height maximum 165 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 200 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Slots Slots Tool-free Yes Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x F120mm RGB fan pre-installed Notes Cable management: 90 mm, Nylon dust filter: Bottom, Front Right: 1 x F360 mm RGB reverse fan pre-installed, Top: 3 x 120 mm fans can be installed, 2 x 140 mm fans can be installed, Bottom: 1 x F360 mm RGB reverse fan pre-installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: 360 mm (up to 400 mm), back: 120 mm Rear connection of the motherboard Yes Further information The H6 RGB+ comes with pre-installed RGB fans and Control Hub Lite. Accessories included User manual, mounting accessories, Control Hub Lite, 2 x F360 RGB reverse fans, 1 x F120 RGB fan Volume 55 l Dimensions Width: 29.2 cm x Height: 44.8 cm x Depth/Length: 42 cm Weight 9.3kg
Tootekood: SST-GD06B USB 3.0GTIN: 4710713967649Korpused
Building off the successful GD04 and GD05, two chassis models that set benchmarks in 2009, SilverStone created the Grandia GD06 to again raise the expectation enthusiasts have for HTPC (Home Theater Personal Computer) chassis. SilverStone engineering team’s expertise in SFF (Small Form Factor) and HTPC are again in full display with GD06’s expanded capability in storage and cooling performance. These improvements were made with the compact depth maintained (340mm) and exterior visuals enhanced as the GD06 is stunningly beautiful as a computer chassis and fits perfectly in the living room. Its five hard drive storage is augmented by two hot-swappable bays for maximum flexibility while a front door lock and a rear Kensington Security Slot ensure security for the installed drives. Cooling is provided by three 120mm silent fans with filters for exceptional performance, quietness and effective dust prevention. For those in doubt that a small footprint HTPC chassis can be used to build a powerful and fully loaded media server, the Grandia GD06 will change their mind.- Positive air pressure design for excellent cooling/quietness and dust-prevention;- Incredible 340mm depth to fit comfortably inside home theater cabinet;- Designed with cable routing for easy installation;- Support 4 x 3.5” hard drives and 2.5” hard drive or SSD (Solid-state drive);- Support expansion cards up to 11 inches;- Includes two front USB 3.0 ports.Format microATXMaximum graphics card lenght 280 mmMaximum CPU-Cooler Height 70 mmSpecial Featuress 120-mm-Fan in der linken Seite (Fanrecording auch with 80-mm-Fan compatible), two 120-mm-Fan in der rechten Seite, Luftöffnung in der linken Seite and im chassisoberteil, ein CPU-Kühler up to 120 mm Höhe einbaubar wenn ein ODD weggelassen wird, maximale Netzteiltiefe von 150 mm, Netzteil-Ansaug-Luftöffnung im Boden with Staubfilter, es können alternativ auch three 3,5"- and two 2,5"-Festplatten eingebaut werden, Anti-Vibrations-Gummis for eine FestplattePower Supply SlotDesign ATXDrive Baysex
The Grandia GD10, along with GD09, is a culmination of SilverStone’s decade-long experience in HTPC case design and manufacturing into a product that every PC enthusiast can enjoy. The incredible efficiency in which it utilizes all available space results in a case that is close in size externally to Micro-ATX based GD04 and GD05, yet capable of fitting most important full size standard components including wider ATX motherboards (SSI-CEB) such as ROG or other gaming-centric models. All drive cages have been designed similarly to those from the popular ML03 case to provide maximum flexibility in drive configuration without the need for additional adapters. For cooling, all positive pressure and smooth airflow designs were retained from previous Grandia models while improvements were made to filter access for even easier maintenance. With the addition of a lockable front door, the GD10 offers an attractively sized case that is capable and user-friendly for those interested in building a system with extra security and application that exceeds typical PC or HTPC environments.- Lockable front door ensures security of system and drives- Positive air pressure design for excellent cooling/quietness and dust-prevention- Support expansion cards up to 12.2 inches- Support ATX motherboards- Quick access filters included- Incredible 362mm depth to fit comfortably inside home theater cabinet- Drive cages with multi-purpose mounts eliminate need for adaptersFormat ATX, SSI-CEBMaximum graphics card lenght 310 mmMaximum CPU-Cooler Height 138 mmSpecial Featuress two 120-mm-Fan auf der rechten Seite included (900 U/min, 18 dB(A)); ein 120-mm-Fan auf der linken Seite included (900 U/min, 18 dB(A)), compatible with 80-mm-FanPower Supply SlotDesign ATXDrive Baysexternal 5,25 inches 1internal 3,5 inches 22,5 inches 1FansIncluded 3x 120 mmInstallable 2x 80 mmFront-SidePorts USB 3.0 2Audio 2Back-SideSlots Full-Size 7additional Full-Size 1Product dimensions 442 x 171 x 362 mmWeight 4.8 kg
Internal 4x 2.5 ", 3x 3.5" (cross, hard drive cage), Front I / O 2x USB-A 3.0, 1x headphone / microphone, PCI slots 4, Fan (front) 1x 120mm or 3x 120mm (optional) or 2x 140mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm front, 120 / 240mm top, 120mm rear, Mainboard to μATX, Supported Motherboards Mini-ITX (6.7 "x6.7") / μATX (9.6 "x9.6"), Power supply ATX (max 325mm deep without front radiator and without HDD cage), Power supply position below, CPU cooler up to max. 166mm height Graphic cards up to max. 346mm, Color black, inside black, Dimensions (WxHxD) 210x411x411mm, volume 35.47l, weight 5.72kg, Special features Cable management, dust filter, glass viewing window, MCB-NR400-KGNN-S00
Tootekood: OBSERVATORY LITE MESHGTIN: 5999094003491Korpused
Mõõtmed: 190 x 440 x 400 mm (L x K x S) Kasti mõõtmed: 258 x 498 x 440 mm (L x K x S) Materjal: Teras, karastatud klaas, võrk, plastik Pakend: EPE vaht Kaal: u. 5,5 kg Värv: must Kujutegur: ATX, Micro-ATX, Mini-ITX Võimalikke fänne kokku: 3x 120 mm (ees) 2x 120 mm (katus) 1x 120 mm (taga) Eelinstallitud: 3x 120 mm (ees) ARGB LED 1x 120 mm (taga) ARGB LED Radiaatori kinnitus: 1x 280 mm (ees) Filter: katus, põhi Sõidupesad: 2x 3,5 / 2,5 "(sisemine) 3x 2,5 "(sisemine) PSU: 1x tavaline ATX (valikuline) Laienduspesad: 7 I / O-paneel: 2x USB 2.0 (sisemine ühendus) 1x USB 3.0 (sisemine ühendus) 1x heli sisse / välja RGB / lähtestamise lüliti GPU maksimaalne pikkus: 335 mm (AIO kasutamisel 310 mm) Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU pikkus: 180 mm
