The SCORPION III is the next iteration of the highly successful Scorpion gaming case by CHIEFTEC. Upgrading all four Ring Fans from the Scorpion 2 to full Rainbow Fans from our Tornado fan set, the Scorpion 3 shines in a brand-new light. An additional upgrade is the easy-install tempered glass panel. The innovative slide-to-open mechanism with thumbscrews in the back allows for the tempered glass side panel to be easily removed and installed. With these innovative new features, while building on the highly commended quality and feature set from the Scorpion case, the Scorpion 3 takes gaming by CHIEFTEC to yet another level. 4x 120mm A-RGB Rainbow fans pre-installed 2x tempered glass panels (front & side) 3PIN +5V A-RGB M/B Sync via RGB control hub Clean cable management options USB 3.2 Gen2x2 Type-C Connector
With the Lian Li O11 Dynamic Mini V2 Flow, you can make your gaming setup a real eye-catcher: Despite its compact design, this mini case offers a spacious interior with enough room to make your visions a reality. Whether you prefer air cooling, water cooling with an AiO, or vertical installation of your graphics card, this case allows all that and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior for installing powerful hardware Clean cable management: Cable holders and support for motherboards with back-connect design for tidy routing Includes GPU brackets: Allows you to install your graphics card both vertically and horizontally Dust protection: Easy-to-clean dust filters at multiple locations Five pre-installed fans: Three 120 mm fans at the bottom and two 120 mm fans on the side with reverse blades The Lian Li O11 Dynamic Mini V2 Flow: Mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 Flow with sample hardware Equipped with tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 Flow allows you to showcase your hardware. Thanks to its compact size, it fits easily on your desk and instantly becomes the centerpiece of your gaming setup—without annoying cable clutter inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable holders, the case allows you to route cables cleanly. An integrated holder for the heavy 24-pin ATX cable ensures it stays neat and secure, while cleverly positioned straps keep all other cables bundled together. The drive cages can also be used to hide your cables. This makes cable management effortless—whether you're a beginner building your first gaming PC or a pro who doesn’t want to spend hours organizing cables. Flexible installation for motherboards and AiO water coolers With a vertically adjustable motherboard standoff, the case gives you more flexibility for installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The upper position allows you to mount 240 mm and 360 mm AiO coolers, while the lower position supports a 280 mm radiator as well. Well cooled even under full load Up to nine fans possible Space for two water cooling radiators Mesh panel on the top Dust filter on the bottom The fans and radiators ensure adequate cooling for your gaming hardware, even under full load. A mesh panel and dust filter help reduce dust buildup inside the case, extending the life of your hardware. Lian Li O11D Mini V2 Flow fans The Flow version of the O11D Mini V2 comes with five fans pre-installed. These 120 mm fans are equipped with reverse blades: so you always have a clean look without sacrificing precious airflow. Ready for top performance with space for large GPUs The case interior is designed so that even large graphics cards up to 400 mm fit comfortably—whether installed horizontally or vertically. The included GPU brackets ensure a secure hold in both scenarios. This gives you the freedom to choose your preferred GPU installation. Supports motherboards with Mini-ITX, mATX, and ATX form factors—including models with rear cable management (back-connect design). Combined with thoughtful cable holders and Velcro straps, this results in a tidy, clean look: All connectors are neatly concealed behind the motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O Panel The I/O panel module can be mounted both on top of the case and at the front bottom. This allows you to position the case exactly as you like while always having easy access to the power button and ports. If you mount the panel on top, the bottom cover is also removable—improving airflow.
ASUS ROG Strix Helios II. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Frontventiler installeret: 3x 140 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 250 mm, Dybde: 565 mm, Højde: 591 mm
PC case MasterFrame 500 Mesh black The MasterFrame 500 Mesh is a premium open-frame mid-tower chassis built for high-performance components, advanced cooling setups, and limitless customization. Embracing the FreeForm 2.0 design philosophy, it supports ATX to E-ATX motherboards and provides full access to modular design files. With enhanced mesh panels for improved airflow, it empowers builders, modders, and creators to push the boundaries of PC design.
PMC-SE2Gaming Mini TowerDiscover the perfect balance between design and functionality with the MicroArtx MC-SE2. Featuring continuous, frameless tempered glass panels on the front and sides, this computer case transforms your workstation into a stylish display of your hardware. A 120mm FRGB rear fan, dual-chamber design with support for liquid cooling kits, and an optimized Airflow Mesh ventilation system ensure exceptional thermal efficiency during gaming sessions.
Das J1000 ARGB ist ein kompaktes Micro-ATX-Gehäuse, dass eine stylische Optik mit einem guten Airflow vereint. Sein stylisches Aussehen hat es hierbei von einem ARGB-Streifen an der Vorderseite gepaart mit einem Seitenteil, das freie Sicht auf die verbaute Hardware erlaubt. Der passende Airflow wird durch eine perforierte Frontblende sowie ein 120-mm-Lüfter an der Rückseite erzeugt. Für leistungsstarke Gaming-Builds lassen sich jedoch nochmals vier Lüfter einfach erweitern. Der elegant geschwungene ARGB-Streifen an der Front des J1000 ARGB sorgt für individuelle Lichtakzente und ein modernes Gaming-Design. Die perforierte Frontblende des J1000 ARGB lässt kühle Luft ungehindert ins Gehäuse strömen – perfekt für hitzige Gaming-Sessions. Mit einem bereits installierten 120-mm-Lüfter hinten und Platz für bis zu insgesamt fünf Lüfter bietet das J1000 ARGB flexible Kühloptionen für alle Einsatzzwecke. Das Seitenteil aus gehärtetem Glas bringt die verbaute Gaming-Hardware perfekt zur Geltung und eignet sich ideal für weitere beleuchtete Komponenten. Für massig installierte Spiele oder Multimedia-Daten finden bis zu zwei 3,5-Zoll-Festplatten oder sechs 2,5-Zoll-SSDs im Inneren des J1000 ARGB Platz. Ob Headset oder USB-Stick: Zwei schnelle USB-3.0-Anschlüsse, ein zusätzlicher USB-2.0-Anschluss sowie die Audiobuchsen sind bequem an der Gehäuseoberseite erreichbar.
Das Elite 600 ist ein ATX-Mid-Tower-Gehäuse für Systembauer, die Wert auf Leistung und Stil legen. Mit einem Seitenteil aus gehärtetem Glas und einem schlanken, modernen Design bietet es beeindruckendes Kühlpotenzial und unterstützt bis zu 360-mm-Radiatoren für eine effiziente Luftzirkulation. Das Gehäuse verfügt über einen USB 3.2 Gen 2x2 Typ-C Anschluss für schnelle Konnektivität und bietet reichlich Speicheroptionen, darunter Platz für eine 3,5-Zoll-Festplatte, ein 2,5-Zoll/3,5-Zoll-Laufwerk und zwei 2,5-Zoll-SSDs. Es ist für GPUs in voller Größe bis zu 425 mm ausgelegt und bietet Platz für anspruchsvolle Hardware und gleichzeitig eine klare, funktionale Ästhetik für jeden Systemaufbau.
The Corsair FRAME 4000X RS PC case was specially designed for premium airflow and ensures efficient cooling of your components. Thanks to the well-thought-out mesh panels and optimized airflow, your PC system stays cool and powerful even under heavy load. Black mid tower with built-in RGB front Multiple fan and radiator mounts for effective cooling performance Supports motherboards up to E-ATX, including back-connect designs Space for graphics cards up to 405 mm and CPU coolers up to 170 mm in height Includes 4x RS120 fans Corsair FRAME 4000X RS: RGB PC case with built-in fans The Corsair FRAME 4000X RS mid tower offers the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it is the ideal choice for gaming builds. Extensive cooling options with fans and radiators To keep your hardware cool under any workload, up to 13 120 mm fans can be installed simultaneously in the Corsair FRAME 4000X RS. The top, front, and side support three 120 mm fans and two 140 mm fans. Two 200 mm fans are even possible at the top. Two additional 120 mm fans can be installed above the power supply shroud, while a further 120 mm or 140 mm fan can be mounted at the rear. An AiO liquid cooling system can also be installed without any problems if you prefer to cool your high-performance hardware with water cooling. Large radiators up to 360 mm can be installed at the top, front, and side, while only 120 mm or 140 mm radiators can be installed at the rear. Four pre-installed fans make getting started easy: three RS120 fans are mounted at the front, with one more at the rear. Installing your hardware The case offers enough space for powerful gaming hardware. It supports graphics cards up to 405 mm. Motherboards up to E-ATX format are supported, including motherboards with rear-facing connectors. The CPU cooler should not exceed a height of 170 mm. A total of three drives can be installed to store programs and games.
Housing type: Midi Tower ATX Motherboard format acceptable: m-ATX, ATX, Extended ATX, mini ITX 5.25 "bays (external) - 3.5 "bays (internal) 3 pcs 2.5 "bays (internal) 4 pcs The number of expansion slots: 7 +3 pcs. USB socket on the front panel: 1 x USB 3.0, 2 x USB 2.0 Front panel microphone jack: 1 piece. Headphone jack on the front panel: 1 piece. Tool-free assembly: No Height: 487 mm Width: 230 mm Depth: 440 mm Number of fans installed: 5 pcs (2x RGB LED front 20 cm., 1x RGB LED rear 14 cm., 2x top 14 cm) Number of places for additional fans: 0 Maximum length of graphics cards: 370 mm The maximum height of the CPU heat sink: 180 mm Water cooling support: Yes (Front: 360mm; Rear: 120mm) Housing color: Black and silver More information: Dust filter x 3 Tempered glass on the side of the housing LED backlight. Removable side panel 90 degree inverted HD cage Bottom mounted power supply. Cable arrangement system Kit contents: Remote control to control the backlight, screws, cable ties.
Internal 2x 3.5 "(transverse, hard drive cage), 2x 2.5", Front I / O 2x USB-A 3.0, 1x headphones, 1x microphone, PCI slots 4, Fan (front) 3x 120mm (optional) or 2x 140mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 320mm, Color white, inside black, Lighting without lighting, Dimensions (WxHxD) 225x431x400mm, Volume 38.79l, Weight 6.20kg, Housing type minitower, Special features Cable management, dust filter, graphics card holder, viewing window made of glass, w/o psu, R-MACUBE110-WHNGM1N-G-1
Internal 2x 3.5 "(transverse, hard drive cage), 2x 2.5", Front I / O 2x USB-A 3.0, 1x headphones, 1x microphone, PCI slots 4, Fan (front) 3x 120mm (optional) or 2x 140mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 320mm, Color black, inside black, Lighting without lighting, Dimensions (WxHxD) 225x431x400mm, Volume 38.79l, Weight 6.20kg, Housing type minitower, Special features Cable management, dust filter, graphics card holder, viewing window made of glass, w/o psu, R-MACUBE110-BKNGM1N-G-1
Product kirjeldus: Zalman S3 TG - Torn - ATX Product Type: System cabinet Form Factor: Torn I/O Ühendusi: 2 x USB 2.0 1 x kõrvaklapid 1 x microphone 1 x USB 3.0 Supported Motherboards: ATX, microATX, Mini-ITX System Cabinet Features: Supports 120 mm radiator in rear, toetab 120 mm radiator in front panel, tempered glass side panel, bottom dust filter, top magnetic dust filter Power Device: No toiteplokk mõõtmed (WxDxH): 19.6 cm x 42.4 cm x 46.2 cm kaal: 4.8 kg
Prime AP201 Tempered Glass | Max GPU Length 338 mm; PSU Length 140-180 mm | Micro | PSU Not included | Top: 3 x 120 mm; 2 x 140 mm, Rear: 1 x 120 mm, Pre-installed Fans (Rear): 1 x 120 mm | Dimensions 205 x 350 x 460 mm
The next generation of airflow cases from DeepCool has arrived, and they are indeed glorious. The CH560 DIGITAL is a newly designed mid-tower case with a concentrated focus on increased airflow throughout the entire chassis. Three bright PWM enabled 140mm ARGB fans are mounted in front of the main compartment, a hybrid side panel, and a dual status digital screen sets the CH560 DIGITAL apart from the competition. A BREATH OF FRESH AIR The CH560 DIGITAL provides exceptional airflow from all sides of the case, from the high airflow front to the hybrid tempered glass side panel, cool air is always available for the modern power-hungry components. HYBRID AIRFLOW GLASS SIDE PANEL A unique tempered glass and mesh hybrid side panel provides a crystal-clear view into the heart of your system while also supplying modern GPUs with additional ventilation: a functional yet elegant design. REAL-TIME DUAL-STATUS DIGITAL DISPLAY Monitor vital CPU and GPU information from the cockpit of your gaming station with the integrated double-status digital screen. Choose between CPU and GPU temperatures, utilization, or both (switches between temperature and utilization in 5-second intervals). A simple to use application will give you control of the display statuses. MAXIMUM COOLING CAPACITY The CH560 DIGITAL has a plethora of cooling configurations, from the ability to mount 360mm radiators on the top and front to the three included 140mm ARGB fans up front and a 120mm ARGB at the rear—the cooling configurations are endless. BIGGER, BRIGHTER, BETTER Three luminous PWM enabled 140mm ARGB fans come pre-installed on the front of the CH560 DIGITAL and introduce an abundant amount of fresh air into the chassis, these fans are mounted outside of the main compartment to provide maximum clearance for the largest of GPUs while maintaining a smaller footprint. The rear 120mm ARGB fan is also PWM enabled and will exhaust the warm air out of the chassis.
Eleganter Midi-Tower für Gaming-PCs, mit Front aus Walnussholz, kompatibel mit E-ATX Mainboards, Seitenteil aus Temperglas, bis zu 7x 120-mm-Lüfter oder 6x 140-mm-Lüfter, bis zu 2x 3,5-Zoll oder 4x 2,5-Zoll-Laufwerke, I/O-Panel mit 1x USB 3.1 Typ C und 2x USB 3.0 Typ A
Lupus 27 Computer Midi Tower ATX PC Case is a new case from the iBOX brand. This time we get extremely interesting combinations of tempered glass on the side panel of the housing with a front made of a special mesh, under which there are RGB fans. This interesting combination gives the housing a unique look and makes your gaming stand look even better. The case is designed with gamers in mind. The power supply is mounted at the bottom in a special tunnel that separates it from the rest of the case. In addition, the housing is equipped with a set of filters limiting dust access to the interior. It has a USB 3.0 port and two USB 2.0 ports. Three 120mm RGB backlit fans are mounted on the front and one 120mm fan is mounted on the back of the case. The side window is made of tempered glass. This interesting combination of 3 materials (glass, metal and plastic) makes Lupus 27 an extremely interesting proposition.
