XPG INVADER X. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Placering af strømforsyning: Bund. Understøttede diametre for sideventilatorer: 120 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 245 mm, Dybde: 475 mm, Højde: 448 mm
XPG BATTLECRUISER II ST. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Frontventiler installeret: 3x 120 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 506 mm, Højde: 550 mm. Pakkebredde: 339 mm, Pakkedybde: 643 mm, Pakkehøjde: 615 mm
• USB 3.2 Gen 1x1 - USB-A • For two 8,89cm/3,5" SATA hard disk drives • RAID feature (0 / 1 / Large / Normal) • UASP support (Win 8 or higher) • Aluminium body • Fan controller • Chipset for SATA 5 Gb/s (SATA I/II/III) - • Plug‘n‘Play • Nominal data transfer rate: up to 5 Gb/s
The LCD Panel Kit is an exclusive expansion accessory for the The Tower 200 Turquoise case. With its 3.9-inch LCD display, users can use the TT RGB Plus 2.0 software to gain full control over performance monitoring and customized effects. In addition, the LCD Panel Kit can be combined with other Thermaltake Ultra series products, providing an optimal visual LCD experience.
Professional gaming PC case NOCTIS FLOW RGB X1 NOCTIS FLOW RGB X1 a case designed for maximum airflow During intense gameplay, temperature has a real impact on stability, FPS (Frames Per Second), and the overall performance of your computer.The mesh front panel (dense, breathable mesh) on the NOCTIS FLOW RGB X1 increases airflow, keeping components cool even under heavy load. Four RGB fans included full 4-pin PWM control The set includes four 120 mm RGB (Red Green Blue) fans they not only look modern but are highly functional.Thanks to 4-pin PWM (automatic speed control), the system increases fan speed exactly when your processor or graphics card starts working harder. Enhanced AIO cooling system installation wide compatibility In the NOCTIS FLOW RGB X1 you have complete freedom to install AIO (All in One) water cooling: on the top, front, rear, and most importantly in the dedicated side area next to the motherboard.This allows you to create a setup that best suits your graphics card, processor, and gaming style. NOCTIS FLOW RGB X1 offers extended radiator installation options, including space next to the motherboard. Supported configurations: top: 120 / 240 mm, front: 120 / 240 / 280 / 360 mm, next to the motherboard: 120 / 240 mm, rear: 120 mm. This flexible solution lets you tailor the cooling layout to your specific hardware configuration. Compatibility with large components no upgrade limitations The case supports CPU coolers up to 170 mm, graphics cards up to 350 mm, and power supplies up to 180 mm (or 230 mm after removing the HDD cage).This means you can choose exactly the GPU and cooling system that deliver top performance without worrying if everything will fit. Optimized airflow layout up to 10 fans NOCTIS FLOW RGB X1 lets you configure cooling to match your play style: maximum airflow, maximum silence, perfectly balanced. With 10 potential fan mounting spots, you get full control over your system temperatures. Available positions: 3 × front, 2 × top, 1 × rear, 2 × next to the motherboard, 2 × in the PSU chamber. This layout makes it easy to achieve the optimal balance between cooling and acoustics. Compatibility with ATX / mATX / Mini-ITX motherboards The case supports three popular motherboard standards: ATX (Advanced Technology eXtended) full-size, most expandable, mATX (Micro ATX) compact but still functional, Mini-ITX the smallest, ideal for mini gaming setups. Flexible drive system configuration tailored to the user Customize your storage setup to match your game library and workflow: more SSDs faster loading and system responsiveness, more HDDs more space for projects, recordings, or streamer archives. The choice is yours the case supports both options. NOCTIS FLOW RGB allows mounting: 2 × HDD 3.5 + 2 × SSD 2.5or 1 × HDD 3.5 + 3 × SSD 2.5. A practical solution for expanding storage space for games, video materials, or fast system drives. Case protected with filters and designed for clean airflow The case maintains high airflow while protecting components with two dust filters (top + bottom), helping extend component longevity. The mesh front panel is complemented by additional dust filters: top, PSU chamber. As a result, the inside of the PC stays clean and components remain stable over time. Ergonomic I/O panel quick access to essential ports The top panel includes: USB-A 3.1 Gen 1 (Universal Serial Bus Type A, 3.1 Gen 1 standard) 2 × USB-A 2.0 HD Audio (High Definition Audio) The ports are easily accessible, making it convenient to connect flash drives, accessories, or headphones without reaching behind the PC. NOCTIS FLOW RGB X1 a case for users who need efficient cooling and full functionality A solid, well-designed structure with high airflow, broad compatibility, and a modern ventilation layout.An ideal choice for gaming PCs, streaming setups, and powerful workstations.
Das Chenbro RM24100-L ist ein robustes und ausbaubares Gehäuse für professionelle und platzsparende Server-Lösungen. Sein benutzerfreundliches Design bietet einfache Installationen. Mit seiner guten Belüftung bleibt es auf lange Zeit zuverlässig.
PC case Volcano AQ200 ARGB MIDI BLACK The MODECOM Volcano AQ200 ARGB MIDI is a representative of the Volcano AQ case series, characterized by an eye-catching design with rounded shapes of the front panel made of tempered glass, support for motherboards with reversed connectors, four 120 mm ARGB fans included as standard along with an ARGB lighting controller, and support for water cooling radiators up to 420 mm, as well as numerous perforations on the panels to ensure efficient cooling of the computer. A distinctive feature of the AQ200 version is the LED display, which allows monitoring the temperature and workload of the processor, graphics card, and RAM memory. All these advantages are complemented by two USB 3.0 ports and one USB-C port (USB 3.2 Gen 2) located on the side panel. This is a case designed to showcase components and give full control over monitoring their performance.
Clear lines, strong cooling, uncompromising look: With the Steel Shark, Sharkoon presents a stylish two-chamber ATX case that combines modern design with a particularly tidy look. Tempered glass on the front and side, four pre-installed ARGB PWM fans as well as extensive cooling options and BTF support make the Steel Shark the ideal basis for powerful and visually impressive gaming systems. Thanks to the well-thought-out two-chamber design, the Steel Shark clearly separates hardware and power supply including cable management. This creates an extra tidy look in the main area, while cables, drives and power supply can be discreetly stored at the back. The front and side panels of the Steel Shark are made of tempered glass and provide a clear view of the built-in hardware and the integrated lighting. This makes the case perfect for users who want to present their system not only powerfully, but also visually impressively. The Steel Shark is equipped with four 120 mm ARGB PWM fans ex works. These not only ensure an effective airflow, but also skillfully showcase the system visually. A practical ARGB control and a PWM fan hub with five positions are included! A total of up to eleven fans can be installed in the Steel Shark. In addition, the housing supports the simultaneous installation of two radiators and is therefore also aimed at water cooling enthusiasts who want to cool their system particularly efficiently and quietly. In addition to classic ATX motherboards, the Steel Shark also supports models with a BTF design. The rear connection technology further optimizes cable management and further underlines the clean look of the system. The Steel Shark is also flexible when it comes to selecting powerful hardware: It supports graphics cards with a length of up to 424 mm, CPU coolers with a height of up to 168 mm and power supplies with a length of up to 244 mm. Tower case type Color black EAN 4044951044924 Made in China Midi tower design Motherboard form factor ATX Tempered glass material Window Kit Yes Internal dimensions Plug-in card length maximum 424 mm Internal dimensions CPU cooler height maximum 168 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 244 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Front 3 x 120 mm ARGB-PWM fans pre-installed Back 1 x 120 mm ARGB-PWM fan pre-installed Notes Cable management system, graphics card holder, top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed Lighting Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Water cooling possible Supported radiators Front: 360 mm, Top: 360/280 mm Rear connection of the motherboard Yes Note If the graphics card is longer than 270 mm, there may be conflicts when installing a radiator in the side Accessories available accessory set Volume 59 l Dimensions Width: 28.5 cm x Height: 45.2 cm x Depth/Length: 46 cm
The NZXT H6 RGB+ (2026) in the elegant all-black version combines modern design, powerful cooling and impressive RGB lighting in a case that was specially developed for demanding gamers and PC enthusiasts. The striking panoramic glass front with seamless corner glazing offers an impressive view of the installed hardware and makes every system a visual highlight on the desk. Thanks to the innovative dual-chamber layout, the power supply, drives and cables are neatly separated from the main system. This not only ensures a tidy look, but also improves the airflow within the case. The angled front fans direct fresh air specifically to the most important components and ensure efficient cooling of the processor and graphics card, even under high load. The H6 RGB+ is equipped with powerful RGB fans ex works, which ensure an optimal balance of cooling performance and impressive lighting effects. The integrated RGB control enables easy synchronization of the lighting and creates individual color accents that perfectly match your own setup. Generous mesh areas and support for numerous additional fans and large water cooling radiators offer maximum flexibility for powerful gaming and high-end systems. With support for ATX, Micro-ATX and Mini-ITX motherboards as well as enough space for modern high-end graphics cards and powerful CPU coolers, the case is ideal for current and future hardware generations. Thoughtful details such as side panels that can be removed without tools, an integrated cable management system and a GPU support make assembly easier and ensure a professional appearance. Tower case type Color black EAN 5056547209357 Manufacturer no. CC-H62FB-P1 H6 series Midi tower design Motherboard form factor ATX Material steel, tempered glass Window Kit Yes Mesh front Yes Internal dimensions plug-in card length maximum 390 mm Internal dimensions CPU cooler height maximum 165 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 200 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Slots Slots Tool-free Yes Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x F120mm RGB fan pre-installed Notes Cable management: 90 mm, Nylon dust filter: Bottom, Front Right: 1 x F360 mm RGB reverse fan pre-installed, Top: 3 x 120 mm fans can be installed, 2 x 140 mm fans can be installed, Bottom: 1 x F360 mm RGB reverse fan pre-installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: 360 mm (up to 400 mm), back: 120 mm Rear connection of the motherboard Yes Further information The H6 RGB+ comes with pre-installed RGB fans and Control Hub Lite. Accessories included User manual, mounting accessories, Control Hub Lite, 2 x F360 RGB reverse fans, 1 x F120 RGB fan Volume 55 l Dimensions Width: 29.2 cm x Height: 44.8 cm x Depth/Length: 42 cm Weight 9.3kg
The NZXT H6 RGB+ (2026) in the elegant all-black version combines modern design, powerful cooling and impressive RGB lighting in a case that was specially developed for demanding gamers and PC enthusiasts. The striking panoramic glass front with seamless corner glazing offers an impressive view of the installed hardware and makes every system a visual highlight on the desk. Thanks to the innovative dual-chamber layout, the power supply, drives and cables are neatly separated from the main system. This not only ensures a tidy look, but also improves the airflow within the case. The angled front fans direct fresh air specifically to the most important components and ensure efficient cooling of the processor and graphics card, even under high load. The H6 RGB+ is equipped with powerful RGB fans ex works, which ensure an optimal balance of cooling performance and impressive lighting effects. The integrated RGB control enables easy synchronization of the lighting and creates individual color accents that perfectly match your own setup. Generous mesh areas and support for numerous additional fans and large water cooling radiators offer maximum flexibility for powerful gaming and high-end systems. With support for ATX, Micro-ATX and Mini-ITX motherboards as well as enough space for modern high-end graphics cards and powerful CPU coolers, the case is ideal for current and future hardware generations. Thoughtful details such as side panels that can be removed without tools, an integrated cable management system and a GPU support make assembly easier and ensure a professional appearance. Tower case type Color white EAN 5056547209364 Manufacturer no. CC-H62FW-P1 H6 series Midi tower design Motherboard form factor ATX Material steel, tempered glass Window Kit Yes Mesh front Yes Internal dimensions plug-in card length maximum 390 mm Internal dimensions CPU cooler height maximum 165 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 200 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Slots Slots Tool-free Yes Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x F120mm RGB fan pre-installed Notes Cable management: 90 mm, Nylon dust filter: Bottom, Front Right: 1 x F360 mm RGB reverse fan pre-installed, Top: 3 x 120 mm fans can be installed, 2 x 140 mm fans can be installed, Bottom: 1 x F360 mm RGB reverse fan pre-installed Lighting Yes, RGB Water cooling possible Yes Water cooling possible Supported radiators Top: 360 mm (up to 400 mm), back: 120 mm Rear connection of the motherboard Yes Further information The H6 RGB+ comes with pre-installed RGB fans and Control Hub Lite. Accessories included User manual, mounting accessories, Control Hub Lite, 2 x F360 RGB reverse fans, 1 x F120 RGB fan Volume 55 l Dimensions Width: 29.2 cm x Height: 44.8 cm x Depth/Length: 42 cm Weight 9.3kg
The HYTE Y70 Touch Infinite GUNDAM WING is an exclusive, limited edition premium ATX case co-developed with Bandai Namco to celebrate the 30th anniversary of Mobile Suit Gundam Wing. The unique design combines the iconic aesthetic of Wing Gundam Zero with cutting-edge PC case technology, making each configuration a real eye-catcher in gaming, anime and enthusiast builds. The focus is on the integrated 14.9-inch 2.5K multi-touch display with IPS technology and a 60Hz refresh rate, which can be individually adjusted via HYTE Nexus. Exclusive Gundam Wing animations, high-quality UV prints and thematic design elements give the case a unique collector's edition character. Technically, the special edition is based on the powerful HYTE Y70 Touch Infinite Mid-Tower model with a dual-chamber layout and enormous cooling capacity. The case supports current high-end components, including E-ATX motherboards, vertical 4-socket GPUs up to 422 mm in length, and radiators up to 360 mm in length. The included PCIe 4.0 x16 riser cable ensures a sleek vertical display of the GPU and optimized airflow. With space for up to ten fans, extensive cable management features and a modern design with panoramic glass, the HYTE Y70 Touch Infinite GUNDAM WING is ideal for high-end gaming PCs, show builds and individual creator systems. The combination of performance-oriented design and iconic anime design makes this case a unique highlight for Gundam fans and PC enthusiasts alike.
Case Edition: V200 RGB Case Form Factor: Mid Tower Motherboard Form Factor: ATX, MicroATX, Mini-ITX Front/Side/Top Panel I/O: 1 x Headphone 1 x Mic In 2 x USB 2.0 1 x USB 3.0 Drive Bays: 3 x 2.5" Internal (Accessible) 2 x 3.5" Internal (Hidden) Standard Expansion Slots: 7 Fan Bays: 2 x 120/140mm 1 x 120mm 3 x 120mm / 2x 140mm Fans Included: 4 x 120mm w/ RGB LEDs Fan Controller/Hub: Built-in Fan Controller Liquid Cooling Support: Front Radiator 1 x 240/280mm Rear Radiator Compatibility 1 x 120mm Clearances: Max CPU Cooler Height 160 mm Max GPU Card Length 380 mm Window/s: Yes Window Configuration: 1 x Main Side Window Construction: Tempered Glass LED Lighting: Yes LED Lighting Emitters: Included LED Fan/s LED Lighting Colour: RGB LED Lighting Support & Control: Compatible with ASRock PolyChromeSync Compatible with ASUS AURA Sync Compatible with Gigabyte RGB Fusion Compatible with MSI Mystic Light Sync PSU Support: ATX PSU Mounting Location: Bottom Mount, Rear Max PSU Length: 170 mm Colour: Black Chassis Contruction Materials: SPCC Dimensions: 204 x 446 x 439 (WxHxD mm) Weight: 7.1 kg (Approx)
Chassis INTER-TECH A-3411 Creek Gaming Tower, ATX, 1xUSB3.0, 2xUSB2.0, PSU optional, Window side panel, LED light on the front, integrated RGB LED, Black
