No. of drive bays: 4 MOLEX power connectors: 0 Floppy power connectors: 0 SATA power connectors: 0 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 0 Number of power supply connector 4+4-pin 12V: 0 8-pin 12V power connectors: 0 Dimensions: 390 x 205 x 380 mm Weight: 4.5 Other features: Fans included:- Back: 1 x 120mmMounting places for fans:- Front: 3 x 120mm or 2 x 140mm- Top: 2 x 120mm or 2 x 140mm- Back: 1 x 120 mmInstallation places for heat sinks:- Front: 1 x 360mm or 1x 280mm- Back: 1 x 120 mm- Maximum cooling height of the processor: 155mm- Maximum length of the graphics card: 350mm- Maximum length of the power supply: 220mm
Internal 4x 2.5 "/ 3.5" (cross, drive rails), 6x 2.5 "or 3x 3.5", Front I / O 2x USB-A 3.0, 2x USB-A 2.0, 1x microphone, 1x headphones, PCI slots 10 (2x riser card), Fan (front) 2x 140mm, 1400rpm (blue illuminated) or 3x 120mm (optional), Fan (rear) 1x 140mm, 1400rpm (blue illuminated), Fan (top) 3x 140mm (optional), Fan (below) 2x 120mm (optional), Motherboard up to E-ATX, Power supply ATX, Power supply position below, CPU cooler up to max. 190mm height, Graphic cards up to max. 310mm (410mm without HDD cage), Color white, inside white Dimensions (WxHxD) 274x592x577mm, Volume 93.59l, Weight 18.90kg, Special features Cable management, dust filter, glass viewing window, CA-1I7-00F6WN-00
Product kirjeldus: Zalman S2 TG - Torn - ATX Product Type: System cabinet Form Factor: Torn I/O Ühendusi: 2 x USB 2.0 1 x kõrvaklapid 1 x microphone 1 x USB 3.0 Supported Motherboards: ATX, microATX, Mini-ITX System Cabinet Features: Supports 120 mm radiator in rear, toetab 120 mm radiator in front panel, tempered glass side panel, bottom dust filter, top magnetic dust filter Power Device: No toiteplokk mõõtmed (WxDxH): 19.6 cm x 42.4 cm x 46.2 cm kaal: 5 kg
Product kirjeldus: Zalman S3 TG - Torn - ATX Product Type: System cabinet Form Factor: Torn I/O Ühendusi: 2 x USB 2.0 1 x kõrvaklapid 1 x microphone 1 x USB 3.0 Supported Motherboards: ATX, microATX, Mini-ITX System Cabinet Features: Supports 120 mm radiator in rear, toetab 120 mm radiator in front panel, tempered glass side panel, bottom dust filter, top magnetic dust filter Power Device: No toiteplokk mõõtmed (WxDxH): 19.6 cm x 42.4 cm x 46.2 cm kaal: 4.8 kg
Spacious Micro-ATX case in black, for motherboards up to Micro-ATX, tempered glass side panel, up to 11x 120-mm fans possible, 2x radiators up to 360 mm possible, graphics cards up to 400 mm in length, dual-chamber design.
The CORSAIR iCUE LINK 3500X RGB mid-tower case is designed for enthusiasts seeking a high-performance, aesthetically pleasing PC build. With its versatile cooling options, it supports multiple fan and radiator configurations, ensuring that your components stay cool under heavy load. The case is designed to be compatible with a broad range of motherboards, from Mini-ITX to Extended ATX, making it a suitable choice for builders planning to upgrade their system. The elegant tempered-glass panels on the side and front not only allow you to showcase your RGB components but also elevate the overall look of your setup. Additionally, the case features comprehensive dust filtration and high-speed connection options, including USB-C 3.2 Gen 2, making it a suitable contender for gamers and professionals.
The Lian Li DAN Cases A3-mATX Wood Edition in white combines minimalist design with luxurious functionality. With its elegant beech wood front, excellent airflow through mesh panels, and flexible customization options, it is the perfect choice if you want a powerful, compact setup. White Micro-ATX case by Lian Li in collaboration with DAN Cases Elegant front cover made of noble beech wood Mesh panels on the sides and top for excellent airflow Flexibly customizable: Let your imagination run wild Excellent cooling thanks to space for 360 mm radiators Suitable for motherboards in Micro-ATX or Mini-ITX form factor Supports various power supplies from SFX to ATX
Black case with a closed side Efficient cooling with up to seven fans and a radiator up to 360mm Support for large motherboards up to E-ATX and back-connect Space for graphics cards up to 415mm and CPU coolers with a height of up to 184mm Up to six drives possible Three M25-120mm fans already included PHANTEKS XT Silent: Compact and simple midi-tower The PHANTEKS XT Silent fits into any setup with its simple black design. It offers extensive options for installing your high-end hardware. To keep your system cool even at full power, there is plenty of space for fans and radiators. Effectively cooled with fans and radiators To ensure your high-end components do not overheat even under full load, up to seven fans can be installed in the midi-tower. The top supports either up to three 120mm or two 140mm fans. Additionally, three more 120mm fans can be installed on the mid-plate. The rear also allows for a 120mm or 140mm fan. Furthermore, three PHANTEKS M25-120mm fans are already included in the package. If you prefer water cooling - whether an all-in-one water cooling system or a custom-built water cooling solution - there are two locations to install a radiator. A maximum 360mm radiator can be mounted at the top, and another 120mm radiator at the rear. With these fan and radiator options, your system will not lose performance. Hardware installation The midi-tower supports the installation of large graphics cards up to 415mm in size. Consequently, the current NVIDIA GPUs of the 40 series are also possible. Motherboards up to E-ATX format can be accommodated. To avoid messy cable clutter, you can also install motherboards with back-connect. The CPU cooler should not exceed a height of 184mm. On the other hand, there are hardly any limits for the power supply, as it can be up to 270mm long. To store programs and games, up to six drives can be installed: up to three 2.5-inch SSDs can be placed on the side, two more in the power supply chamber, as well as one 3.5-inch drive.
Elegant midi-tower for motherboards up to ATX form factor Mesh design on air intakes for optimal airflow High cooling capacity with space for up to twelve fans and a 360 mm radiator Four dust filters keep annoying dust in check Sufficient space for 175 mm tall CPU coolers and 420 mm long graphics cards The Montech XR Wood: Elegant midi-tower with enormous airflow With simple wood accents, a mesh design, and a side panel made of tempered glass, the Montech case makes a minimalistic and elegant impression at first glance. Behind the façade are four dust filters for large air inlets and four pre-installed 120 mm ARGB fans that provide strong airflow. The Montech XR series Structurally, the XR Wood from Montech borrows much from the XR. With a new front section made of mesh with wood accents and the I/O position shifted upwards, the XR Wood is a successful expansion of Montech's XR lineup. Compact size without compromise Whether it's cooling, airflow, or hardware space, the compact design of the Montech XR Wood makes no compromises. There's enough room for a CPU cooler up to 175 mm in height and mounting options for up to twelve 120 mm fans, guaranteeing optimal cooling for your high-performance hardware and strong airflow through the case. There is also enough space for graphics cards up to 420 mm long. Even the most powerful graphics cards keep their chips cool thanks to the strong airflow in the case. Large radiators for optimal cooling If AiOs or even custom loops are more your style, the case provides space for a 360 mm radiator at the top and a 120 mm radiator at the rear. Dust filters inside the case prevent bothersome dust buildup in your radiators without significantly affecting airflow. Well-equipped I/O panel To keep up with the connectivity needs of modern CPUs and chipsets, Montech didn't cut corners on the I/O panel either. A USB Type-C port with 10 Gbit/s data throughput and two USB Type-A ports with 5 Gbit/s speed each allow convenient connection of devices or storage media to the front I/O of the case. In addition, two common 3.5 mm audio jacks are also available.
