Keep your components at the optimal temperature with the Corsair Frame 5000D, the perfect choice for anyone who values high-performance cooling. Its air-permeable design and optimized airflow architecture ensure ideal cooling even during long gaming sessions or heavy system loads—a case that perfectly combines performance and cooling. Black midi-tower with air-permeable steel front cover Effective cooling performance with up to 14 fans and radiators up to 420 mm Supports motherboards up to E-ATX and back-connect design Space for graphics cards up to 450 mm and CPU coolers up to 175 mm in height Four pre-installed RS140 fans Corsair Frame 5000D: Midi-Tower for High-Performance Hardware The Corsair Frame 5000D midi-tower offers the perfect balance between size and functionality. With ample space for high-performance hardware and efficient cooling, it is the ideal choice for gaming builds. Comprehensive Cooling Options To keep your hardware cool under any load, the Corsair Frame 5000D can accommodate up to 14 fans simultaneously. The top supports either three 120 mm or 140 mm fans. The front can also house three 120 mm or 140 mm fans, as well as two 200 mm fans. The fan mounts on the top and front are adjustable, giving you much more flexibility when installing your fans. You can install another four 120 mm fans at the bottom, while the side can house three fans of either 120 mm or 140 mm. The rear can be fitted with a 120 mm or 140 mm fan. Four high-quality 140 mm RS fans from Corsair are already installed—three at the front and one at the rear. The switchable connectors make for easy setup. If you prefer to install water cooling—whether an AiO or custom loop—radiators can be installed as well. The top can accommodate a 420 mm radiator, while the front and side support 360 mm radiators. There is also space at the rear for a small 140 mm or 120 mm radiator. Installing Your Hardware The case offers enough space for high-performance gaming hardware. It supports the installation of large graphics cards up to 450 mm—a supplied support arm ensures your GPU doesn’t sag. Additionally, vertical installation is possible with a compatible riser cable, available separately. Motherboards up to the E-ATX format are supported—including back-connect models. Thanks to hidden cable routing, the interior of your gaming PC remains much tidier. The CPU cooler should not exceed a height of 175 mm. For storing programs and games, you can install a total of eight drives—six 2.5-inch SSDs and two 3.5-inch HDDs.
Tootekood: KING 45 PRO (W)GTIN: 4710562749328Korpused
MONTECH KING 45 PRO (W) Полномасштабное доминирование, культовый стиль MONTECH KING 45 PRO — это корпус формата ATX, созданный для тех, кто собирает систему без компромиссов. Панорамное закалённое стекло открывает вид на все компоненты, превращая ПK в настоящее произведение инженерного искусства. Благодаря системе охлаждения с эффектом дымохода корпус поддерживает стабильную работу мощных видеокарт и компонентов нового поколения даже при экстремальных нагрузках. Панорамная прозрачность и современная эстетика Kаждый элемент дизайна KING 45 PRO подчинён идее чистоты форм и технологической элегантности. Большая изогнутая стеклянная панель создаёт непрерывную панораму, через которую видны все компоненты и подсветка. Белый цвет корпуса добавляет лёгкости и премиальности, превращая сборку в эстетически совершенный объект. Архитектура точности Kорпус имеет двухкамерную конструкцию, разделяющую блок питания и кабели от основного пространства. Это обеспечивает эффективный поток воздуха, аккуратный внешний вид и удобный монтаж. Внутреннее устройство продумано до мелочей — каждый вырез, крепление и направление воздуха оптимизированы для максимальной производительности. Охлаждение, работающее на преимущество Нижние вентиляторы установлены под углом, направляя свежий воздух прямо к видеокарте. Это помогает сохранять стабильные частоты во время длительных игровых сессий или ресурсоёмких задач. Воздушный поток быстро удаляет горячий воздух, поддерживая оптимальную температуру системы. Эффект дымохода — естественная вентиляция высокого уровня Вертикальный поток воздуха, поднимающийся снизу вверх, эффективно отводит тепло от крупных GPU и радиаторов. Это снижает температуру ядра, повышает стабильность и продлевает срок службы компонентов. Пространство для роста и будущего MONTECH KING 45 PRO предлагает достаточно места для больших видеокарт, современных материнских плат формата Micro ATX или Mini-ITX и систем жидкостного охлаждения. Верхняя панель поддерживает установку радиаторов до 360 мм толщиной до 84 мм, что делает корпус совместимым с самыми мощными системами охлаждения. Свет и производительность в гармонии В корпусе используются вентиляторы AX120 PRO, обеспечивающие на 10% больше воздушного потока благодаря оптимизированной форме лопастей. 360° ARGB подсветка придаёт сборке индивидуальность и динамику, подсвечивая каждый угол яркими, настраиваемыми эффектами. Создан для побед MONTECH KING 45 PRO — это основа для мощной, стильной и технологичной системы. Он объединяет продуманную архитектуру, стабильное охлаждение и эстетическое совершенство, оставаясь выбором энтузиастов, для которых важна каждая деталь.
Stylischer Midi-Tower in Schwarz, perforierte Front für guten Airflow, Seitenteil aus Tempered Glass, mit Netzteilabdeckung, inkl. 3x 140-mm-FRGB-Lüfter, Grafikkarten bis 348 mm, CPU-Kühler bis 180 mm
Compact case with less than 9L volume; Supports up to m-ATX motherboards; 80mm fan pre-installed; Classic Design; 80PLUS Bronze 300W Power Supply Included
CORSAIR 3000D RGB mid-tower Tempered Glass Black The CORSAIR 3000D RGB AIRFLOW mid-tower ATX case features intensive airflow powered by three high-performance factory-mounted CORSAIR AR120 RGB fans for superior cooling and fantastic lighting effects. The addition of a tempered glass side panel turns your PC into a state-of-the-art computer technology display. The intelligently laid out interior holds up to 8 x 120mm fans or 4 x 140mm fans. With room for radiators up to 360mm in size, support for 3.5" and 2.5" drives, and support for four-slot graphics cards up to 360mm in length, you can create a high-performance system. The front I/O panel has two USB 3.2 Type A ports and a microphone and headphone jack. Outstanding Cooling Capabilities: Spacious interior holds up to 8 x 120mm cooling fans or 4 x 140mm fans with multiple heatsinks including one 360mm front and one 280mm on top (depending on the height of the memory modules) RAM). A complete mid-tower package: A mid-tower ATX case with a sleek, high-airflow design and three pre-installed CORSAIR AR120 RGB fans for superior cooling and compelling lighting effects. Dedicated graphics card cooling: The case accommodates the latest graphics cards and has two additional 120mm fan mounts on the PSU shroud that allow you to install fans directing the airflow directly to the graphics card. Three-slot graphics support: For an advanced, high-performance computing setup, you can freely install a three-slot graphics card up to 360mm in length into the chassis. Optimized front panel for intensive air circulation: The optimized steel front panel provides powerful airflow in the system for maximum cooling. Tempered glass side panel: Show off your internal components in elegant style All the storage you need: Holds up to 2 SSDs and 2 HDDs.
Full Tower CTE C750 TG ARGB case The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for Centralized Thermal Efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB is a high-end presentation case that allows you to imagine something outside the box. Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE C750 TG ARGB's versatile interior includes two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. Perfect protection against dust There are small details on the top, front, bottom, rear and right side of the housing, removable filters that provide excellent dust protection and can be easily removed for cleaning.
Arya ARGB Midi Black Logic Concept Arya. This is a "box" designed to build a modern gaming computer. The stage is hers You have a good processor, a cool graphics card, beautiful-looking RAM cubes. It's time to fit it all into a specific and well-thought-out housing. And then she enters the stage - Logic Concept Arya. This is a "box" designed to build a modern gaming computer. Spacious design with an airy front and top panel (mesh), three pre-installed ARGB fans (2 x 140 mm at the front and 1 x 120 mm at the back), a filter under the power supply and... a side door made of tempered glass. And all this in midi ATX size. The art of creating a case Dust filters under the power supply and on the top panel, three pre-installed ARGB fans, airy front panel, tempered glass door and power supply tunnel. There is simply everything you need to build an efficient and modern gaming computer. Knock Knock! The side panel made of tempered glass is placed on two hinges. No more unscrewing screws - just press the panel in the appropriate place to open the door. And then everything becomes easier when access to components is at your fingertips. Time to play Do you like playing? That's great, because we do too. And we know that it is not always possible to sit down and play "for an hour" during the day. Well, it just can't be done. Sometimes we play in the evenings - you probably do too. Sometimes also at night when others are sleeping. And we play like that for several hours... That's why we created a case that will not only keep the components cool, but also provide the necessary silence. Airy panels: front and top do the job here! Plus three ARGB fans. They work really quietly! We share your passion for gaming. Optimum air circulation The front and top panels are ventilated and covered with mesh. A total of three ARGB fans are installed here (two 140 mm at the front and one 120 mm at the back). The casing design forces cool air in and expels heated air from the back and top. This solution effectively cools the installed components, positively influencing their operation and service life. Optionally, it is possible to install water cooling (240 mm) on the front or top of the case or two fans (120 mm or 140 mm) on the top. The beauty of ARGB A gaming case must look nice. Therefore, pre-installed ARGB fans emphasize the gaming purpose of the entire computer. The backlight color can be freely changed from predefined settings using the RESET button on the housing control panel. Simple assembly Everything here is well thought out and intuitive. Building a computer in this case is a pleasure and is child's play. Convenient access to the top panel Convenient access to the top panel with two USB 2.0 and one USB 3.0 ports. Additionally, there are HD audio minijack connectors for headphones and a microphone, a power button, a reset button and a button to control the fan backlight. Protect your computer from dust There is a dust filter placed under the power supply. Minimizes the amount of dust sucked in by the power supply fan, positively affecting its operating temperature and service life. An additional filter is located on the top of the housing. Thanks to this, it effectively captures unwanted dust and protects the installed components. It protects against dust that enters the computer by gravity throughout the day, even when the computer is turned off. 7 PCIe expansion card slots Seven PCIe expansion card slots. This is the optimal amount for installing, for example, a graphics card and a network card.
Obudowa do konstruowania wydajnych komputerów mid tower iCUE LINK 5000T LX RGB Przyciągnij uwagę za pomocą wyjątkowej profilowanej konstrukcji obudowy CORSAIR 5000T LX RGB, w której możesz zbudować idealny system oparty na płycie głównej z odwróconymi złączami. Elegancka stalowa obudowa o wyjątkowym kształcie 3 wentylatory LX120 RGB i koncentrator systemowy iCUE LINK w komplecie Zintegrowane taśmy świetlne RGB Aurora zapewniające rozproszone oświetlenie Działa z płytami głównymi z odwróconymi złączami Zdejmowane panele przedni i górny z siateczki umożliwiające intensywny obieg powietrza Mieści do 10 wentylatorów 120 mm lub 4 wentylatorów 140 mm oraz kilka radiatorów 360 mm System organizacji okablowania RapidRoute EFEKTOWNE LINIETa elegancka obudowa o wyjątkowym kształcie z taśmami świetlnymi iCUE LINK Aurora i wentylatorami iCUE LINK LX120 RGB zapewnia wyraziste i dynamiczne podświetlenie pozwalające podziwiać jej uderzające piękno. OGROMNY POTENCJAŁ CHŁODZENIAPrzestronne wnętrze pomieści nawet 10 wentylatorów 120 mm albo 4 wentylatory 140 mm, a także kilka radiatorów o wysokości 60 mm, w tym z przodu lub boku - o rozmiarze 360 mm oraz w górnej części - o rozmiarze 360 mm w konfiguracji push/pull. PEŁNA FUNKCJONALNOŚĆTa obudowa ma wszystko, czego potrzeba do budowy bardzo wydajnego komputera. ZDEJMOWANE PANELE PRZEDNI I GÓRNYSiateczkowe panele o wyjątkowej konstrukcji, które można łatwo zdjąć, aby dostać się do środka, umożliwiają intensywny przepływ powietrza. DWA OBSŁUGIWANE BEZNARZĘDZIOWO PANELE BOCZNE NA ZAWIASACHŁatwy dostęp do systemu dzięki panelom na zawiasach: jednemu ze szkła hartowanego, eksponującemu wszystkie komponenty, oraz jednemu ze stali z drugiej strony. SYSTEM PROWADZENIA PRZEWODÓW CORSAIR RAPIDROUTEUmożliwia szybkie i łatwe poprowadzenie przewodów przez obszerny 46-milimetrowy ukryty kanał pod płytą główną. OBSŁUGA PŁYT GŁÓWNYCH Z ODWROTNYMI ZŁĄCZAMISprawdzona pod kątem zgodności z płytami głównymi ASUS BTF, MSI Project Zero oraz Gigabyte Project Stealth, które mają złącza z tyłu, dzięki czemu nie psują widoku przez podłączone kable. PROSTA KONSTRUKCJANowoczesna konstrukcja w popularnym formacie obudowy komputerowej 5000T ma wygodne rozwiązania, które ułatwią Ci pracę. PUDEŁKO NA ŚRUBY WIELOKROTNEGO UŻYTKUDzięki dodanemu w zestawie pudełku, w którym wszystkie potrzebne Ci śruby będą bezpiecznie zamknięte, nie zgubisz już żadnej ważnej śrubki. PRZELOTKI FORMOWANE W DWÓCH CYKLACHDzięki miękkim, gumowym przelotkom wewnętrznym umożliwiającym łatwe przeciąganie kabli oraz twardym gumowym przelotkom zewnętrznym, które pewnie trzymają się na miejscu, możesz uniknąć frustracji podczas instalowania przewodów. ŚRUBY QUICKTURN DO WENTYLATORÓWŚruby do wentylatorów CORSAIR QuikTurn są równie wytrzymałe i bezpieczne jak tradycyjne śruby, dzięki czemu montaż wentylatorów w systemie staje się niezwykle prosty. Przydaje się to, gdy wypełniasz obudowę tej wielkości. WIELE MOŻLIWOŚCI CHŁODZENIAStwórz odpowiedni do swoich potrzeb system chłodzenia dzięki miejscu na 10 wentylatorów 120 mm oraz różnorodnym opcjom montażu dwóch radiatorów o maksymalnym rozmiarze 360 mm. NOWOCZESNY PANEL WEJŚĆ/WYJŚĆ Z PRZODUUmożliwia łatwy dostęp do nowoczesnych złączy, w tym do portu USB 3.2 Gen 2 Type-C, 4 portów USB 3.2 Gen 1 Type-A oraz zintegrowanego gniazda audio i mikrofonowego typu jack.
The CORSAIR FRAME 4000D RS ARGB is a fully-modular and spacious mid-tower PC case featuring InfiniRail™ Fan Mounting System and compatible with reverse connector motherboards.Includes: Fully-modular design for next-level customization InfiniRail™ Fan Mounting System for easier building Includes three RS120 ARGB performance fans Dual 360mm radiator support GPU anti-sag stabilization arm Compatible with reverse connector motherboards
Zalman P10 micro-ATX Case with Tempered Glass and Panoramic View - White The Zalman P10 micro-ATX case in elegant white combines modern design with a generous panoramic view. Thanks to the large side panel made of tempered glass, the installed components can be perfectly presented, making it the ideal choice for PC enthusiasts and gamers who value aesthetics and performance equally. Main features of the Zalman P10 case in white: Panoramic Tempered Glass Side Window : Provides an unobstructed view of the hardware and gives the system a luxurious look. Compact micro-ATX format : Perfect for powerful, space-saving PC builds. Optimal cooling options : Supports multiple fans and is compatible with water cooling systems for effective heat dissipation. Elegant white design : Fits perfectly into modern setups and stands out with its minimalist, high-quality look. This Zalman P10 case is an excellent choice for those who want to showcase their PC without sacrificing compactness. The panoramic view and elegant white make it perfect for demanding builds in micro-ATX format.
The Lian Li DAN Cases A3-mATX Wood Edition in black combines modern design with an elegant walnut wood front panel. Thanks to excellent airflow through mesh panels, flexible configuration options, and space for high-end hardware, this case is the ideal choice for those seeking performance and style in a compact format. Perfect for demanding builds with a personal touch! Micro-ATX case by Lian Li in collaboration with DAN Cases Elegant front cover made from premium walnut wood and side panel of tempered glass Mesh panel on the top for excellent airflow Flexibly customizable: Let your imagination run wild Outstanding cooling thanks to space for 360 mm radiators Suitable for motherboards in Micro-ATX or Mini-ITX form factors Supports various power supplies from SFX to ATX A touch of luxury: The Lian Li DAN Cases A3-mATX Wood Edition in black If you're looking for a small form factor case for high-performance PC hardware, you should take a closer look at the Lian Li DAN Cases A3-mATX Wood Edition. This case combines a minimalist design with premium features: the elegant walnut wood front gives your setup an exclusive touch. With a capacity of about 26 liters, this Micro-ATX case is compact and space-saving. At the same time, the A3-mATX Wood Edition is perfect for high-end PC components, offering effective cooling despite its small size. With plenty of room for fans and radiators and generous ventilation openings, this mini tower easily meets the demands of powerful hardware. Flexibility meets performance: The fan and cooling options of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX Wood Edition offers space for up to 10 fans in the 120 mm format. These can be distributed as follows: three on the top, three on the side, three on the bottom, and one on the rear. Alternatively, two 140 mm fans can be mounted on both the top and side. With 25 mm thick fans on the case bottom, the GPU’s height is limited to 61 mm (3 slots). CPU air coolers can be up to 165 mm tall. Lian Li and Daniel Hansen also considered water cooling when developing the A3-mATX: A radiator can be installed in three locations inside the case: either a 360 mm (triple radiator) or 280 mm (dual radiator) on the top or the side. You must choose one of these two positions. The bottom of the case accommodates an additional 240 mm radiator. If you mount the fans below the radiator, you can even install a 360 mm radiator. Customizable configuration: The versatile possibilities of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX is suitable for a motherboard in Micro-ATX or Mini-ITX form factor. Unlike a Mini-ITX case, the PC case offers four expansion slots, allowing you to install a graphics card up to 4 slots tall and up to 415 mm long. You can install two 2.5-inch SSDs on a bracket. You can also install a 3.5-inch HDD or another 2.5-inch drive at the bottom of the case. You have the choice between an ATX, SFX-L, or SFX power supply, which you can mount flexibly at the front or side to create more space for your graphics card or the radiator—just as you prefer. In general, the smaller the power supply in the A3-mATX, the more room you have for the rest of your hardware. The I/O panel on the front of the Lian Li DAN Cases A3-mATX Wood Edition features two USB 3.0 Type A ports, one USB 3.1 Type C port, two 3.5 mm audio jacks (Mic-In/Audio-Out), and a power button. Note: The Lian Li DAN Cases A3-mATX Wood Edition offers numerous configuration options, but space inside this case is limited. The size and position of the power supply are crucial in selecting the right PC components. Therefore, we recommend careful planning using the manual in advance.
PC case Volcano Space XL ARGB Full Tower 5 fans, black Youre investing in a top-tier processor, a powerful graphics card, fast RAM, and a solid motherboard, so why would you hide them from yourself and other household members? The MODECOM Volcano Space XL Full Tower is a case designed so that your computer can finally look truly impressive. The front and side tempered-glass panels create a full visual showcaselike hardware displayed in a glass cabinet. Every detail, every ARGB effect (if you install illuminated fans), and every line of your configuration is visible and highlighted by this majestic chassis. MODECOM Volcano Space XL was designed for those who love personalization and perfect internal cable management, while also needing a spacious Full Tower case. Support for motherboards with reversed connectors allows you to build a modern interior without having to expose cables. Thanks to snap-on panels, you gain quick access to the inside. Installing components, upgrading hardware, and cleaning the interior become even easier. The spacious interior gives you full freedom: large E-ATX boards, robust water cooling (up to 420 mm), long graphics cards, and all the components you need for your gaming setup. With the MODECOM Volcano Space XL, your computer will know no limitsand it will look exactly the way it deserves. If you love technology, need plenty of room for expansion, and want your hardware always within sight, the MODECOM Volcano Space XL Full Tower is made for you. Especially in the Volcano Space XL NF version, which gives you complete freedom to configure cooling according to your preferences, as it comes without pre-installed fans. Because bigger can do more. 5 x 140 ARGB RIGHT FROM THE START The right operating temperature is the key to longevity and cool performance of any computer. The MODECOM Volcano Space XL was designed to ensure that your components always work in optimal conditions. As standard, you get five high-performance ARGB fans: three 140 mm fans on the side panel (in a reversed layout) and two 140 mm fans at the back of the case. This setup provides efficient airflow that effectively cools the processor and graphics card, even during intense and long gaming sessions. If you need even more cooling options, the MODECOM Volcano Space XL gives you full freedom to expand. On the top panel, you can install an additional three 120 mm fans, and in the bottom section up to three 120 or 140 mm fans. Additionally, near the PSU shroud, there is space for two more 120 or 140 mm fans if you are not using a top-mounted water-cooling system. More fans mean more stable temperatures and higher performance - and for advanced components, its a necessity.
PC case Volcano Space XL ARGB Full Tower 5 fans, white Youre investing in a top-tier processor, a powerful graphics card, fast RAM, and a solid motherboard, so why would you hide them from yourself and other household members? The MODECOM Volcano Space XL Full Tower is a case designed so that your computer can finally look truly impressive. The front and side tempered-glass panels create a full visual showcaselike hardware displayed in a glass cabinet. Every detail, every ARGB effect (if you install illuminated fans), and every line of your configuration is visible and highlighted by this majestic chassis. MODECOM Volcano Space XL was designed for those who love personalization and perfect internal cable management, while also needing a spacious Full Tower case. Support for motherboards with reversed connectors allows you to build a modern interior without having to expose cables. Thanks to snap-on panels, you gain quick access to the inside. Installing components, upgrading hardware, and cleaning the interior become even easier. The spacious interior gives you full freedom: large E-ATX boards, robust water cooling (up to 420 mm), long graphics cards, and all the components you need for your gaming setup. With the MODECOM Volcano Space XL, your computer will know no limitsand it will look exactly the way it deserves. If you love technology, need plenty of room for expansion, and want your hardware always within sight, the MODECOM Volcano Space XL Full Tower is made for you. Especially in the Volcano Space XL NF version, which gives you complete freedom to configure cooling according to your preferences, as it comes without pre-installed fans. Because bigger can do more. 5 x 140 ARGB RIGHT FROM THE START The right operating temperature is the key to longevity and cool performance of any computer. The MODECOM Volcano Space XL was designed to ensure that your components always work in optimal conditions. As standard, you get five high-performance ARGB fans: three 140 mm fans on the side panel (in a reversed layout) and two 140 mm fans at the back of the case. This setup provides efficient airflow that effectively cools the processor and graphics card, even during intense and long gaming sessions. If you need even more cooling options, the MODECOM Volcano Space XL gives you full freedom to expand. On the top panel, you can install an additional three 120 mm fans, and in the bottom section up to three 120 or 140 mm fans. Additionally, near the PSU shroud, there is space for two more 120 or 140 mm fans if you are not using a top-mounted water-cooling system. More fans mean more stable temperatures and higher performance - and for advanced components, its a necessity.
Tootja: AKYGA Tootegrupp: arvutikorpus arvutikorpuse tüüp: ATX Ümbrise tüüp (motherboard type): ATX, MicroATX, Flex ATX, MINI ITX Supported toiteploki standards: ATX external 3,5"sahtleid: 0 external 5,25"sahtleid: 1 external 5,25" väikseid sahtleid: 0 internal 2,5"sahtleid: 3 internal 3,5"sahtleid: 3 intenal 5,25"sahtleid: 1 paigaldatud toiteplokk(ies): Ei maksimum toiteplokke: 1 toiteploki võimsus: andmed puuduvad elektripesade pistikuid Serial ATA: andmed puuduvad ATX toiteploki ühenduspesa tüüp: andmed puuduvad +12V elektripesa tüüp: andmed puuduvad I/O Ühendusi: 1x stereo mini-jack (kõrvaklappide väljund), 1x stereo mini-jack (mikrofon input), 2x USB 3.0, 1x USB 2.0 ventilaatori kiiruse regulaator: Ei paigaldatud ventilaatoreid: 0 maksimaalne kogus of fans: 3 laius: 200 mm pikkus: 418 mm kõrgus: 412 mm pesade arv korpuses: 7 tk külje õhukanal: Jah tööriistavaba kokkupanek: Ei värv: must Lisaomadused: andmed puuduvad Lisainfo: Product Site
