The Antec FLUX White Midi Tower Case is a stylish and functional choice for your PC build. With a gross weight of 10.07 kg and dimensions of 31.2 cm in width and 57 cm in depth, this case provides ample space for your components. It supports a CPU cooler height of up to 180 mm and a maximum graphics card length of 408 mm, making it suitable for high-performance hardware. The sleek white design and ATX form factor ensure it fits seamlessly into any setup.
The DIGITUS wall-mounted data communications cabinet is equipped with a glazed door and a cable gland in the roof and floor. The steel structure is made of steel sheet up to 1.5 mm thick. It is possible to change the side of the door hinges and adjust the depth. The rack cabinets are delivered unassembled, in a flat package. Assembly is carried out in a few simple steps thanks to the enclosed "step-by-step" instructions. Installation cabinet supplied unassembled Quick installation Door opening angle: 200° 1-point locking on front door 483 mm (19") rack profiles mounted at the front inside the cabinet, galvanized 483 mm (19") rack profiles with depth adjustment 1.1-1.5 thick, high-strength sheet steel, powder-coated Cable inlet with brush strip in the roof and plastic cover in the floor Ventilation slots for active and passive air supply and exhaust Front door: glass, single Side panels: on two sides Assembled: no
Micro-ATX case for DIY NAS, one pre-installed fan, GPUs up to 230 mm / CPU up to 70 mm height, 6x 3.5 / 2x 2.5 inch drives possible, 1x USB-C / 1x USB-A
The RaidSonic ICY BOX IB-127CL-U3 is designed to enhance storage capabilities with its dual-bay setup for both 2.5" and 3.5" drives. Featuring a robust aluminum and plastic enclosure, this storage solution ensures durability while offering efficient heat dissipation to keep your drives functioning optimally. With support for Serial ATA-600, data transfers can reach speeds of 600 MBps, making it suitable for transferring large files quickly and efficiently. The UASP transfer protocol further optimizes performance when using compatible USB 3.2 Gen 1 devices, allowing for smoother data transfers with lower CPU usage.Equipped with RGB lighting and a clone progress display, the IB-127CL-U3 adds a stylish yet functional touch to your workspace. The LED indicator helps monitor the status of your drives effectively. Installation is simple thanks to the Plug-and-Play standard, allowing users to start utilizing the storage array without complicated setups. With its hot-swap capability, users can replace drives effortlessly while the device remains powered on, adding to the convenience this product offers.
White midi tower, extravagant design with panoramic window, for motherboards up to ATX format, exceptionally good airflow, two different motherboard positions, 2x USB-A ports on the I/O panel.
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Compared to the D32 PRO, the D32 STD PC case addresses the midrange and budget segment with key features such as back-connect support and minimal front I/O.Elegant and space-saving design for mATX motherboardsSeamless cable management with cutouts for back-connect motherboardsTempered glass side panel provides a subtle appearanceAmple space for cooling solutions allows the installation of high-performance hardwareDust filter protects your hardware from annoying dust particlesThe Jonsbo D32 STD White: Space-saving and subtle case for a wide range of hardwareWhether a midrange HTPC or a high-end PC, builds of all kinds comfortably fit into the D32 STD White from Jonsbo. This minimalistic case accommodates graphics cards up to 365 mm long and CPU coolers up to 164 mm high.Thus, even with the compact design of the case, adequate cooling of your hardware is ensured. In combination with up to six 120 mm fans, or one 120 mm fan and four 140 mm fans, the fans also provide enormous airflow inside the case.No cable clutter with back-connectWith back-connect motherboards such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case is virtually free of visible cable clutter despite having the same footprint.Because most power and connection cables can be connected at the rear of the motherboard, you save time on cable management while still enjoying a clean look inside your case. Combined with the tempered glass side window, the view of your hardware is especially appealing.Powerful cooling in a small spaceTo ensure your high-performance hardware is sufficiently cooled even in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AIO, your hardware will always remain cool, even under load.The dust filter on the bottom and mesh side panel design ensure your hardware stays free of dust and dirt. This keeps your temperatures optimal at all times and helps increase the lifespan of your hardware.
Computer case Darkflash DS900 AIR (black) + 6 ARGB Fans Discover a new quality among computer cases with the Darkflash DS900 AIR model. The elegant black model is distinguished not only by its modern design, but also by advanced features that will meet the expectations of the most demanding users. With DS900 AIR your computer will become more efficient, stable and impressive. In the set you will find 6 DM12F 120 mm fans. Stability and design The unique design of the case with trapezoidal feet and shock-absorbing pads provides exceptional stability, eliminating vibrations. This is especially important for powerful computers that can generate vibrations during intensive work. Expandable The DS900 AIR is a model that provides users with ease of expansion. The spacious and easy-to-maintain interior gives you the freedom to expand. The chassis offers maximum compatibility with a flexible mount that accommodates up to 2 SSDs and 2 HDDs. This provides excellent options for configuring storage according to individual needs. Protection and cooling The DS900 Air allows you to build a powerful cooling system with the ability to mount multiple fans and heat sinks, ensuring optimal working conditions for all components. What's more, the back of the case is equipped with a protective steel mesh that allows for even more efficient ventilation. This is crucial for maintaining optimal temperatures and effective cooling especially during intensive work. Compatibility and additional slots The Darkflash DS900 AIR is compatible with ATX, M-ATX and ITX motherboards, providing a wide range of configuration options. It also features 7 additional slots, a maximum VGA length of 425 mm and a maximum CPU height of 170 mm. The power supply located at the bottom of the case allows for better organization and cable management. Included Housing DM12F 120 mm x 6 fan ManufacturerDarkflashModelDS900 AirColorBlackDimensions434 x 218 x 454 mmMaterial0.5 mm SPCCCompatible motherboardsATX/M-ATX/ITXHDD/SDD2/2Number of additional slots7Maximum VGA length425 mmMaximum CPU height170 mmPower supplyATX at the bottomHeatsink systemSide: 240 mm; Top: 240/360 mmFan systemSide: 120 mm x 2; Rear: 120 mm x 1; Top: 120 mm x3/140 mm x 2; PSU: 120 mm x 3;Front panelTempered glassLeft panelTempered glassI/OUSB 3.0 x 1/ USB 2.0 x 1/ LED/Power/Reset/HD Audio switch
