Micro-ATX case for DIY NAS, one pre-installed fan, GPUs up to 230 mm / CPU up to 70 mm height, 6x 3.5 / 2x 2.5 inch drives possible, 1x USB-C / 1x USB-A
Tootekood: D32 PRO BLACKGTIN: 6970620554327Korpused
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Unlike the D32 STD, the D32 PRO PC case is aimed at the high-end segment with special and practical features such as Back-Connect or improved front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for Back-Connect motherboards Tempered glass side panel ensures a subtle appearance Plenty of room for cooling solutions allows installation of high-performance hardware Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Black: Space-saving and subtle case for high-end hardware Whether you’re building a midrange HTPC or a high-end PC – the D32 PRO Black from Jonsbo comfortably accommodates all kinds of builds. This minimal case fits graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In Back-Connect mode, the maximum CPU cooler height is reduced by around seven millimeters. This ensures that, even with the case’s compact design, your hardware gets adequate cooling. Working together with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the fans ensure enormous airflow inside the case. No cable clutter with Back-Connect With Back-Connect motherboards like ASUS’s BTF series, MSI’s PROJECT ZERO series, or GIGABYTE’s Stealth series, the case in B-mode—with about six to seven millimeters more space—remains almost completely free of visible cable clutter. Since most power and connection cables can be connected at the back of the motherboard, you save time on cable management and still have a clean look inside your case. Combined with the tempered glass side window, your hardware is always on display in an especially appealing way. Powerful cooling in a small space To ensure your powerful hardware stays adequately cooled in this compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for plenty of airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware always stays cool, even under load. Three dust filters on the front, top, and bottom make sure your hardware stays free from dust and dirt. This keeps your temperatures at optimal levels and, among other things, helps extend your hardware’s lifespan.
The Phanteks XT M3 impresses with a space-saving design that offers you more than enough room for high-end components. With effective cooling and tidy cable management, the case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact size: Space-saving case for high-end hardware Effective cooling: Space for up to nine fans Large radiator: Supports installation of a 360 mm radiator on the top Tidy build: Room for excellent cable management Back-connect support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini-case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SFF case built for big things. Compatible with high-end graphics cards and motherboards supporting back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports the installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360-mm radiator can be fitted on top if you prefer water cooling. Besides fans and a radiator, the mesh front also ensures very good airflow. This helps prevent hot air from accumulating inside your case. Your new gaming PC with clean cable management Managing cables neatly is not easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also improves airflow. Mini-ITX case built for powerful hardware Even a large graphics card fits in effortlessly—the case offers space for a GPU up to 430 mm in length. Note that you cannot install fans at the front if you use the maximum GPU length. The CPU cooler should not exceed a height of 175 mm, and the power supply should not be longer than 150 mm.
Das Hyte Y70HYTE Y70 HSR Firefly ist ein verbessertes, modernes, ästhetisches ATX-Mid-Tower-Gehäuse mit zwei Kammern, das Gaming-Erlebnisse der nächsten Generation mit massiven vertikalen 4 Steckplätzen bietet und maximale Leistung durch enorme Kühlkapazität ermöglicht. Gleichzeitig feiern Sie Ihre Lieblingshardware, indem Sie Ihren PC so präsentieren, wie er gesehen werden sollte. Im Lieferumfang des Gehäuses ist ein luxuriöser PCIE 4.0 x 16-Riser mit einer farblich abgestimmten Haube für einen ununterbrochenen visuellen Fluss enthalten, der für eine schmerzlose GPU-Installation und einen reibungslosen Build-Prozess sorgt. Es ermöglicht auch eine Fülle von PCIE-Karten mit halber Höhe, die hinter dem Thron der vertikalen Grafik sitzen. Ein geräumiger Innenraum bietet Platz für einen bis zu 360 mm langen und 125 mm dicken Heizkörper an der Seite und eine verstellbare obere Halterung, die oben einen 360-mm-Kühler mit einer Dicke von bis zu 68 mm aufnehmen kann. Zusammen mit der kalten Bodenkühlung an der Unterseite und einem zusätzlichen Lüfter an der Rückseite des Gehäuses verfügt das Y70 über eine Gesamtkapazität von 10 Lüftern in einem vollständig bestückten Gehäuse. Mit über 180 mm Abstand zum Seitenglas werden Enthusiasten von Luft- und Wasserkühlung gleichermaßen die Flexibilität zu schätzen wissen, die ihnen das Gehäuse bietet, um die robustesten Kühlkonfigurationen zu schaffen, die möglich sind.
The Viewport Mini, in its elegant black version, is a mini-tower case featuring front and side panels made of tempered glass, providing a panoramic view of the high-performance interior components. It supports Micro ATX and Mini-ITX motherboards and offers advanced cooling options with 7 fan slots and liquid cooling compatibility for 240/280 mm and 120 mm radiators. The included ARGB fans draw air in through mesh ventilation to optimize airflow. Ideally suited for gaming and high-performance applications, it accommodates GPUs up to 355 mm and CPU coolers up to 165 mm.
Das ENDORFY Signum M30 Air ist ein kompaktes microATX-Gehäuse mit vielseitigen Konfigurationsmöglichkeiten. Das luftige Design mit Mesh-Front, drei vorinstallierten Stratus 120 PWM-Lüftern und Staubfiltern hilft dabei, stabile Temperaturen zu halten. Das Seitenteil aus gehärtetem Glas sowie der schnelle USB-C-Anschluss unterstreichen den modernen Charakter des Gehäuses. Das Signum M30 Air wurde für eine effiziente Kühlung der Komponenten entwickelt. Die vordere Mesh-Front wird von zwei vorinstallierten Lüftern unterstützt, was für einen ungehinderten Luftstrom ins Innere sorgt. Die warme Luft wird durch den hinteren Lüfter sowie den perforierten oberen Bereich des Gehäuses effektiv abgeführt, was stabile Temperaturen im Betrieb unterstützt. Das Gehäuse bietet Platz für bis zu sieben 120-mm-Lüfter. Zwei magnetische Staubfilter sowie die Mesh-Front, die ebenfalls als Staubfilter fungiert, lassen sich werkzeuglos abnehmen und leicht reinigen. Im Lieferumfang des Signum M30 Air sind drei werkseitig montierte Stratus 120 PWM-Lüfter enthalten, die an einen vorinstallierten PWM-Splitter angeschlossen sind. Dadurch reicht ein einzelner 4-Pin-PWM-Anschluss aus, um die Lüfter über das Mainboard zu steuern. Die gemeinsam mit Synergy Cooling entwickelten Lüfter verbinden hohe Leistung mit leisem Betrieb. Das hochwertige FDB-Lager sorgt für eine lange Lebensdauer, während die PWM-Steuerung eine präzise Regelung der Drehzahl ermöglicht – inklusive Fan-Stop-Modus. Das Seitenteil aus gehärtetem Glas verleiht dem Gehäuse ein modernes Erscheinungsbild und setzt die verbauten Komponenten gekonnt in Szene. Der Raum hinter dem Mainboard-Tray sowie sinnvoll platzierte Kabeldurchführungen und Befestigungspunkte für Kabelbinder erleichtern eine saubere Kabelführung. Eine ordentliche Verlegung der Kabel verbessert nicht nur die Optik im Inneren, sondern unterstützt auch einen besseren Luftstrom. Das schlanke Zweikammer-Design wurde für microATX-Mainboards konzipiert und ist zudem mit den kleineren Formaten Mini-ITX und FlexATX kompatibel. Das Signum M30 Air bietet Platz für moderne Komponenten, darunter lange Grafikkarten mit bis zu 345 mm Länge, leistungsstarke Kühllösungen wie Luftkühler bis 159 mm Höhe sowie 240-mm-Radiatoren. Zusätzlich lassen sich mehrere Datenträger verbauen:zwei 2,5"- und zwei 3,5"-Laufwerke. Vier Erweiterungsslots mit verschraubbaren Slotblenden erleichtern die individuelle Konfiguration des Systems. Auf der Oberseite des Gehäuses befindet sich ein funktionales I/O-Panel für den schnellen Zugriff auf häufig genutzte Anschlüsse. Zur Verfügung stehen zwei USBA 3.2 Gen 1 Ports, zwei 3,5-mm-Audiobuchsen für Kopfhörer oder Lautsprecher und Mikrofon sowie ein besonders schneller USB-C 3.2 Gen 2×2 Anschluss mit bis zu 20 Gbit/s. So kannst du moderne Geräte und Zubehör bequem anschließen –ganz ohne Adapter.
Darkflash A290 computer case (white) Want to build yourself the perfect computer for work or gaming? The Darkflash A290 case will help you do it! It is compatible with many types of components and allows you to create a powerful cooling system. It also offers several key ports and buttons, including USB 3.0, USB 2.0 and a headphone/speaker output. It is also distinguished by a modern, stylish design - a tempered glass side panel will give you stunning visual effects. Plenty of expansion possibilities The A290 chassis is compatible with a range of components, so you can easily build exactly the computer of your dreams. The product supports such motherboard standards as ATX, M-ATX and ITX, and allows you to mount a graphics card with a maximum length of 260mm. You'll also have room for CPU cooling up to 160mm in height. Efficient cooling Don't worry about your computer overheating. The well-thought-out design of the A290 case allows for efficient heat dissipation, and there is also the possibility to install 5 120mm fans. You can also install 240mm water cooling. Now you can play even the most dynamic game or use demanding software without any problems! In addition, the kit includes 3 CL6 fans. Thoughtful design The side panel of the case is made of tempered glass. This favors the display of components equipped with backlighting, emphasizing the gaming character of your configuration. What's more, the A290 is distinguished by a modern finish, which further enhances the visual appeal of the hardware. The case is also equipped with a dust filter, which can be easily removed and cleaned. This makes it effortless to keep your equipment in excellent condition. More amenities You can place an HDD or SSD in the case. When you choose the A290, you'll also gain access to an interface with a USB3.0 port, which features outstanding speed. And when you want to expand your hardware configuration, 7 expansion card slots will help. A290 computer case 3x CL6 fan BrandDarkflashModelA290ColorWhiteMotherboard standardATX, M-ATX, ITXSide panelTempered glassDimensions320x190x433mmDisk mounting spacesHDD x1;SSD x1;Expansion card slots7Max graphics card length260mmMax CPU cooling height160mmPower source mounting locationBottomCooling mounting optionsFront: 120mm fan x2;Rear: 120mm fan x1;Top: 120mm fan x2;Front panel connectorsUSB 3.0 x 1, USB 2.0 x 2 Headphone/speaker output, Power, Reset
Tootekood: D32 PRO MESH WHITEGTIN: 6970620554358Korpused
With the D32 series, Jonsbo targets anyone wanting to build their PC in a space-saving manner. Unlike the D32 STD, the D32 PRO PC case offers special and practical features like Back-Connect or improved front I/O, making it aimed at the high-end segment. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for Back-Connect motherboards Mesh side panel for a subtle appearance Plenty of space for cooling solutions, allowing for high-performance hardware installation Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Mesh: Space-saving and subtle case for high-end hardware Whether midrange HTPC or high-end PC – the D32 PRO Mesh from Jonsbo comfortably fits a variety of build types. This minimal case accommodates graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In Back-Connect mode, the maximum CPU cooler height is reduced by just under seven millimeters. This means that even with the compact design of the case, adequate cooling for your hardware is ensured. Combined with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the case provides enormous airflow inside. No cable clutter with Back-Connect With Back-Connect motherboards, such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case in B-mode with around six to seven millimeters additional space is almost completely free of visible cable clutter. Because most power and connection cables can be routed to the back of the motherboard, cable management is no longer necessary, and you still get a clean look inside your case. Powerful cooling in a compact space So your high-performance hardware stays adequately cooled in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware will remain cool even under load. Three dust filters on the front, top, and bottom ensure your hardware stays free from dust and dirt. As a result, your temperatures will always be at optimal levels, and the lifespan of your hardware will be extended.
The Jonsplus BO400 is an innovative showcase case that impresses with its modular architecture, high-quality materials, and clever cooling. With a focus on flexibility and aesthetics, it offers everything enthusiasts and modders need for a customized setup. Showcase case: Midi-tower with sturdy aluminum frame Interchangeable top cover: Choice between metal and glass cover Tool-free removal of individual panels: All sides can be removed without tools 24-pin cable cover: Adjustable cover hides the 24-pin cable Flexible GPU bracket: For various graphics card lengths Jonsplus BO400: Midi-tower with panorama design Jonsplus BO400 with example hardware Show off your setup with the Jonsplus BO400: The midi-tower impresses with extensive cooling options, modular covers, and room for high-end hardware. Flexible panorama design By default, the case comes with a robust metal cover on the top—which can easily be replaced with the included glass panel. The front can also optionally be fitted with a metal panel. The choice is yours: Go for a subtle look with metal elements, or opt for an impressive glass panorama—on two or three sides. Either way, your hardware will be showcased strikingly! Tidy cable management for a clean look from every angle The Jonsplus BO400 case supports motherboards with back-connect design—all ports are hidden on the rear. This way, there are no disruptive cables covering your gaming hardware. Additionally, the tower includes a built-in cover that hides and secures the large 24-pin cable. High-quality aluminum frame The frame is made of aluminum—for a stable and robust structure that also improves airflow thanks to better heat dissipation and gives the case a premium design. Room for powerful high-end hardware Motherboards with Mini-ITX, mATX, and ATX form factor Graphics cards up to 435 mm in length CPU coolers up to 173 mm in height Power supply units up to 200 mm Up to two 3.5-inch SSDs and four 3.5-inch HDDs I/O Panel: 2x USB 3.0, 1x USB-C 3.1, 1x 3.5 mm audio jack Jonsplus BO400 The midi-tower thus offers plenty of space for high-end hardware and is suitable for enthusiasts looking to build a new gaming PC, as well as for beginners assembling their first own PC. Powerful cooling in any situation Jonsplus BO400 fans and radiators To stay cool even under full load, the Jonsplus BO400 supports the installation of up to ten 120 mm fans. You can also install up to three AiO water cooling systems with sizes of 280 mm or 360 mm, allowing you to freely choose between air or water cooling for your CPU. Case includes adjustable mounts for fans and graphics cards Jonsplus BO400 Thanks to the adjustable GPU bracket, your high-performance graphics card stays secure. The bracket can be flexibly adjusted in both length and height to fit different graphics card models. The lower fans can be installed in two different positions. The slightly higher position is especially advantageous for fans with side LED effects, as the lighting is showcased better in this setup.
Mini tower in white, supports up to 7 fans, space for a radiator up to 240mm, motherboards up to mATX, GPU up to 410mm, and CPU cooler up to 171mm in height, supports up to two drives, with a display at the bottom of the front panel The Jonsbo D200 mini case offers you maximum performance in minimal space. Thanks to its compact design, it fits effortlessly on any desk or in your living room without compromising on hardware compatibility. Perfect for anyone looking for a powerful gaming PC in a space-saving format. Black mini tower with panorama design Effective cooling performance thanks to seven fans and radiator up to 240mm Motherboards up to mATX Space for graphics cards up to 410mm and CPU coolers up to 171mm in height Small display on the front to show CPU system data Jonsbo D200: Compact Mini Tower with Tempered Glass on Side and Front The Jonsbo D200 is a mini tower that, despite its small size, offers enough space for powerful hardware. Whether high-end graphics cards or an AiO water cooling system – the possibilities are numerous. Extensive Cooling Options with Fans and Radiators To keep your hardware cool under any load, the Jonsbo D200 can accommodate up to seven fans simultaneously. The top supports three 120mm or two 140mm fans. Three 120mm fans can be installed on the power supply cover, while one additional 120mm fan can be fitted at the rear. An AiO water cooling system can also be easily installed if you prefer to cool your powerful hardware with water cooling. There is space on the top for a radiator up to 240mm. Installing Your Hardware The case provides enough room for powerful gaming hardware. It supports the installation of large graphics cards up to 410mm, so even the latest high-end GPUs from the RTX 5000 series can be installed. Motherboards up to the mATX format are supported. The CPU cooler should not exceed a height of 171mm. To store programs and games, a total of two drives can be installed. CPU Display on the Front The integrated display in the Jonsbo D200 shows you the current temperature of your CPU at all times – for maximum control.
Baltimore 530 Mini tower case 1x USB 3.0 + 2x USB 2.0 + HD audio ABS with hair-line & shinny finish Optional: 1 x 80mm at rear, 120mm at front PCI length/CPU cooler height: 270mm/140mm
Das Thermaltake TR100 ist ein 18,4-Liter-SFF-Gehäuse (Small Form Factor), das mit vielen Details aufwartet. In der rechten Kammer befinden sich das Mini-ITX-Motherboard und das SFX-Netzteil, während die Grafikkarte in der linken Kammer untergebracht ist und über das beiliegende PCI-e 4.0 Riser-Kabel mit dem Motherboard verbunden ist. Über diesen wichtigen Komponenten befindet sich das Kühlsystem: Das TR100 ist in der Lage, einen 280 mm AIO zu beherbergen, um die Wärme von der CPU abzuführen. Alle Paneele sind gut belüftet und abnehmbar, um die Kühlleistung in einem kompakten Formfaktor zu bieten, und die Benutzererfahrung beim Aufbau eines PC-Systems mit TR100 zu vereinfachen. TR100 hat zwei separat erhältliche Zubehörteile: das 3,9“ LCD-Bildschirm-Kit das an der Vorderseite des TR100 installiert werden kann, und das TT Traveling Suite Case, das das System sicher schützt, wenn Sie unterwegs spielen wo auch immer Sie sind.
Das Elite 690 verfügt über zwei gehärtete Glasscheiben, die Ihr System in Szene setzen, während eine holzstrukturierte Front und ein Mesh-Einlass Wärme mit effizientem Luftstrom verbinden. Dank der oberen und unteren Belüftung für vertikale Kühlung unterstützt es vielseitige Lüfter- und Kühlerkonfigurationen – perfekt für leistungsorientierte oder stilvolle Systeme. Die vertikale Anordnung trennt die Wärmezonen für eine bessere Luftzirkulation und eine sauberere Kabelführung. Bis zu 10 Lüfter in einer von unten nach oben verlaufenden Anordnung maximieren den Luftstrom und die Kühlung. Die aus echtem Holz gefertigte Frontplatte verleiht jedem Raum eine warme, organische Note. Das Gehäuse enthält 3 in Reihe schaltbare ARGB-Lüfter mit vollständiger Unterstützung für die Beleuchtungssynchronisierung des Motherboards. Das Elite 690 verfügt über einen USB 3.2 Gen 2x2 Typ-C und zwei USB 3.0-Anschlüsse für blitzschnelle Konnektivität.
This professional server tower case is specifically designed for high-performance server and workstation configurations. It offers outstanding flexibility, generous space for components, and is ideal for demanding IT environments. The case supports up to 2x 5.25" drives—such as for hot-swap frames, removable frames, or other devices—and up to 8x 3.5" hard drives, making it perfect for large storage configurations. Additionally, there is room for 8 expansion slots—for GPU, RAID, network, or other PCIe cards. The motherboard support goes up to E-ATX, making it suitable for high-end server and workstation motherboards. Three built-in 120 mm fans in the center console and 2x 80 mm fans in the rear panel ensure optimal airflow. Ideally suited for servers, NAS systems, video editing workstations, virtualization, or compute-intensive applications—this case provides the perfect platform for your custom high-end system.
