Micro-ATX case for DIY NAS, one pre-installed fan, GPUs up to 230 mm / CPU up to 70 mm height, 6x 3.5 / 2x 2.5 inch drives possible, 1x USB-C / 1x USB-A
Black/white Midi-Tower, extravagant design with panoramic window, for motherboards up to ATX format, exceptionally good airflow, two different motherboard positions, 2x USB-A ports on the I/O panel
Tootekood: D32 PRO MESH WHITEGTIN: 6970620554358Korpused
With the D32 series, Jonsbo targets anyone wanting to build their PC in a space-saving manner. Unlike the D32 STD, the D32 PRO PC case offers special and practical features like Back-Connect or improved front I/O, making it aimed at the high-end segment. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for Back-Connect motherboards Mesh side panel for a subtle appearance Plenty of space for cooling solutions, allowing for high-performance hardware installation Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Mesh: Space-saving and subtle case for high-end hardware Whether midrange HTPC or high-end PC – the D32 PRO Mesh from Jonsbo comfortably fits a variety of build types. This minimal case accommodates graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In Back-Connect mode, the maximum CPU cooler height is reduced by just under seven millimeters. This means that even with the compact design of the case, adequate cooling for your hardware is ensured. Combined with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the case provides enormous airflow inside. No cable clutter with Back-Connect With Back-Connect motherboards, such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case in B-mode with around six to seven millimeters additional space is almost completely free of visible cable clutter. Because most power and connection cables can be routed to the back of the motherboard, cable management is no longer necessary, and you still get a clean look inside your case. Powerful cooling in a compact space So your high-performance hardware stays adequately cooled in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware will remain cool even under load. Three dust filters on the front, top, and bottom ensure your hardware stays free from dust and dirt. As a result, your temperatures will always be at optimal levels, and the lifespan of your hardware will be extended.
The Jonsplus BO400 is an innovative showcase case that impresses with its modular architecture, high-quality materials, and clever cooling. With a focus on flexibility and aesthetics, it offers everything enthusiasts and modders need for a customized setup. Showcase case: Midi-tower with sturdy aluminum frame Interchangeable top cover: Choice between metal and glass cover Tool-free removal of individual panels: All sides can be removed without tools 24-pin cable cover: Adjustable cover hides the 24-pin cable Flexible GPU bracket: For various graphics card lengths Jonsplus BO400: Midi-tower with panorama design Jonsplus BO400 with example hardware Show off your setup with the Jonsplus BO400: The midi-tower impresses with extensive cooling options, modular covers, and room for high-end hardware. Flexible panorama design By default, the case comes with a robust metal cover on the top—which can easily be replaced with the included glass panel. The front can also optionally be fitted with a metal panel. The choice is yours: Go for a subtle look with metal elements, or opt for an impressive glass panorama—on two or three sides. Either way, your hardware will be showcased strikingly! Tidy cable management for a clean look from every angle The Jonsplus BO400 case supports motherboards with back-connect design—all ports are hidden on the rear. This way, there are no disruptive cables covering your gaming hardware. Additionally, the tower includes a built-in cover that hides and secures the large 24-pin cable. High-quality aluminum frame The frame is made of aluminum—for a stable and robust structure that also improves airflow thanks to better heat dissipation and gives the case a premium design. Room for powerful high-end hardware Motherboards with Mini-ITX, mATX, and ATX form factor Graphics cards up to 435 mm in length CPU coolers up to 173 mm in height Power supply units up to 200 mm Up to two 3.5-inch SSDs and four 3.5-inch HDDs I/O Panel: 2x USB 3.0, 1x USB-C 3.1, 1x 3.5 mm audio jack Jonsplus BO400 The midi-tower thus offers plenty of space for high-end hardware and is suitable for enthusiasts looking to build a new gaming PC, as well as for beginners assembling their first own PC. Powerful cooling in any situation Jonsplus BO400 fans and radiators To stay cool even under full load, the Jonsplus BO400 supports the installation of up to ten 120 mm fans. You can also install up to three AiO water cooling systems with sizes of 280 mm or 360 mm, allowing you to freely choose between air or water cooling for your CPU. Case includes adjustable mounts for fans and graphics cards Jonsplus BO400 Thanks to the adjustable GPU bracket, your high-performance graphics card stays secure. The bracket can be flexibly adjusted in both length and height to fit different graphics card models. The lower fans can be installed in two different positions. The slightly higher position is especially advantageous for fans with side LED effects, as the lighting is showcased better in this setup.
Mini tower in white, supports up to 7 fans, space for a radiator up to 240mm, motherboards up to mATX, GPU up to 410mm, and CPU cooler up to 171mm in height, supports up to two drives, with a display at the bottom of the front panel The Jonsbo D200 mini case offers you maximum performance in minimal space. Thanks to its compact design, it fits effortlessly on any desk or in your living room without compromising on hardware compatibility. Perfect for anyone looking for a powerful gaming PC in a space-saving format. Black mini tower with panorama design Effective cooling performance thanks to seven fans and radiator up to 240mm Motherboards up to mATX Space for graphics cards up to 410mm and CPU coolers up to 171mm in height Small display on the front to show CPU system data Jonsbo D200: Compact Mini Tower with Tempered Glass on Side and Front The Jonsbo D200 is a mini tower that, despite its small size, offers enough space for powerful hardware. Whether high-end graphics cards or an AiO water cooling system – the possibilities are numerous. Extensive Cooling Options with Fans and Radiators To keep your hardware cool under any load, the Jonsbo D200 can accommodate up to seven fans simultaneously. The top supports three 120mm or two 140mm fans. Three 120mm fans can be installed on the power supply cover, while one additional 120mm fan can be fitted at the rear. An AiO water cooling system can also be easily installed if you prefer to cool your powerful hardware with water cooling. There is space on the top for a radiator up to 240mm. Installing Your Hardware The case provides enough room for powerful gaming hardware. It supports the installation of large graphics cards up to 410mm, so even the latest high-end GPUs from the RTX 5000 series can be installed. Motherboards up to the mATX format are supported. The CPU cooler should not exceed a height of 171mm. To store programs and games, a total of two drives can be installed. CPU Display on the Front The integrated display in the Jonsbo D200 shows you the current temperature of your CPU at all times – for maximum control.
Baltimore 530 Mini tower case 1x USB 3.0 + 2x USB 2.0 + HD audio ABS with hair-line & shinny finish Optional: 1 x 80mm at rear, 120mm at front PCI length/CPU cooler height: 270mm/140mm
Das Thermaltake TR100 ist ein 18,4-Liter-SFF-Gehäuse (Small Form Factor), das mit vielen Details aufwartet. In der rechten Kammer befinden sich das Mini-ITX-Motherboard und das SFX-Netzteil, während die Grafikkarte in der linken Kammer untergebracht ist und über das beiliegende PCI-e 4.0 Riser-Kabel mit dem Motherboard verbunden ist. Über diesen wichtigen Komponenten befindet sich das Kühlsystem: Das TR100 ist in der Lage, einen 280 mm AIO zu beherbergen, um die Wärme von der CPU abzuführen. Alle Paneele sind gut belüftet und abnehmbar, um die Kühlleistung in einem kompakten Formfaktor zu bieten, und die Benutzererfahrung beim Aufbau eines PC-Systems mit TR100 zu vereinfachen. TR100 hat zwei separat erhältliche Zubehörteile: das 3,9“ LCD-Bildschirm-Kit das an der Vorderseite des TR100 installiert werden kann, und das TT Traveling Suite Case, das das System sicher schützt, wenn Sie unterwegs spielen wo auch immer Sie sind.
Das Elite 690 verfügt über zwei gehärtete Glasscheiben, die Ihr System in Szene setzen, während eine holzstrukturierte Front und ein Mesh-Einlass Wärme mit effizientem Luftstrom verbinden. Dank der oberen und unteren Belüftung für vertikale Kühlung unterstützt es vielseitige Lüfter- und Kühlerkonfigurationen – perfekt für leistungsorientierte oder stilvolle Systeme. Die vertikale Anordnung trennt die Wärmezonen für eine bessere Luftzirkulation und eine sauberere Kabelführung. Bis zu 10 Lüfter in einer von unten nach oben verlaufenden Anordnung maximieren den Luftstrom und die Kühlung. Die aus echtem Holz gefertigte Frontplatte verleiht jedem Raum eine warme, organische Note. Das Gehäuse enthält 3 in Reihe schaltbare ARGB-Lüfter mit vollständiger Unterstützung für die Beleuchtungssynchronisierung des Motherboards. Das Elite 690 verfügt über einen USB 3.2 Gen 2x2 Typ-C und zwei USB 3.0-Anschlüsse für blitzschnelle Konnektivität.
This professional server tower case is specifically designed for high-performance server and workstation configurations. It offers outstanding flexibility, generous space for components, and is ideal for demanding IT environments. The case supports up to 2x 5.25" drives—such as for hot-swap frames, removable frames, or other devices—and up to 8x 3.5" hard drives, making it perfect for large storage configurations. Additionally, there is room for 8 expansion slots—for GPU, RAID, network, or other PCIe cards. The motherboard support goes up to E-ATX, making it suitable for high-end server and workstation motherboards. Three built-in 120 mm fans in the center console and 2x 80 mm fans in the rear panel ensure optimal airflow. Ideally suited for servers, NAS systems, video editing workstations, virtualization, or compute-intensive applications—this case provides the perfect platform for your custom high-end system.
Tootekood: D32 PRO BLACKGTIN: 6970620554327Korpused
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Unlike the D32 STD, the D32 PRO PC case is aimed at the high-end segment with special and practical features such as Back-Connect or improved front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for Back-Connect motherboards Tempered glass side panel ensures a subtle appearance Plenty of room for cooling solutions allows installation of high-performance hardware Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Black: Space-saving and subtle case for high-end hardware Whether you’re building a midrange HTPC or a high-end PC – the D32 PRO Black from Jonsbo comfortably accommodates all kinds of builds. This minimal case fits graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In Back-Connect mode, the maximum CPU cooler height is reduced by around seven millimeters. This ensures that, even with the case’s compact design, your hardware gets adequate cooling. Working together with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the fans ensure enormous airflow inside the case. No cable clutter with Back-Connect With Back-Connect motherboards like ASUS’s BTF series, MSI’s PROJECT ZERO series, or GIGABYTE’s Stealth series, the case in B-mode—with about six to seven millimeters more space—remains almost completely free of visible cable clutter. Since most power and connection cables can be connected at the back of the motherboard, you save time on cable management and still have a clean look inside your case. Combined with the tempered glass side window, your hardware is always on display in an especially appealing way. Powerful cooling in a small space To ensure your powerful hardware stays adequately cooled in this compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for plenty of airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware always stays cool, even under load. Three dust filters on the front, top, and bottom make sure your hardware stays free from dust and dirt. This keeps your temperatures at optimal levels and, among other things, helps extend your hardware’s lifespan.
Midi tower with three glass panels, GPUs up to 380 mm, CPU coolers up to 170 mm, motherboards up to E-ATX compatible, featuring back-connect designs With the Phanteks Evolv X2 Matrix, you can build a striking gaming system with ample space for modern high-end hardware. The case supports E-ATX motherboards, large graphics cards, and powerful cooling. Motherboards with back-connect features such as ASUS BTF and MSI Project Zero help keep the interior tidy. Three glass panels offer an unobstructed view of your setup. There is also a 900-LED pixel matrix at the base of the case. Spacious mid-tower: Perfect for modern hardware Compatible with back-connect boards: ASUS BTF & MSI Project Zero Vertical cooling: Space for up to seven 120 mm fans GPU compatibility: Graphics cards up to 380 mm in length Clean look: Three large glass panels to showcase your hardware Matrix with 900 LEDs: Fully customizable display & effects Phanteks Evolv Series X2: Showcase case for powerful hardware The interior fits motherboards from Mini-ITX to E-ATX and supports boards with back connectors. This keeps the inside neat and organized. Eight PCIe slots and 380 mm of space for your GPU make installing large graphics cards easy. A PC case that wants to be seen Three large exterior glass panels provide an unobstructed view of your components. Metal covers conceal fans and accessories, making your hardware look as if it is floating. The LED matrix display runs along the front and right side of the case floor, showing system information or animations. Whether temperature display, time, or custom texts – you can easily customize the screen to your style, making it a real highlight in your gaming setup. Powerful cooling with vertical airflow The case employs a vertical cooling design: cool fresh air enters from below and warm exhaust air exits at the top. Up to seven 120 mm fans can be installed, all hidden within the panels for a clean look. Powerful & quiet cooling options Bottom: three 120 mm fans Top: three 120 mm fans / radiator up to 360 mm Rear: one 120 mm fan With a CPU cooler height of up to 170 mm, large tower coolers are also possible. A 360 mm radiator will fit perfectly in the top panel for AiO users. NEXLINQ: Simple fan & lighting control The Evolv X2 Matrix is part of the NEXLINQ ecosystem. Fans, coolers, and RGB components connect via a hub and can be conveniently controlled through software. You can use automatic or custom fan curves and adjust lighting colors. Mid-tower supporting back-connect motherboards Additionally, motherboards from Mini-ITX up to E-ATX are supported – including back-connect models such as ASUS BTF, MSI Project Zero, and GIGABYTE Project STEALTH. This keeps the interior especially tidy. Modular I/O panel The I/O panel is located on the bottom side. This allows the case to fit perfectly with your desk and provides easy access to the ports.
The APNX V2-F is a premium PC case designed for excellent cooling, elegant aesthetics, and flexibility. Its three removable tempered glass panels provide a frameless panoramic view, while the X-Pand Flow design significantly improves overall airflow dynamics. With support for up to 13 fans, 360 mm radiators, and two 16 cm fans at the bottom, it delivers top-class thermal performance. The V2-F supports standard motherboards with reverse connectors for cleaner cable management. Features such as a GPU holder, removable motherboard cable cover, and an interchangeable PSU/HDD compartment enhance durability and customization options. With vertical or horizontal 360 mm AIO mounting and support for the APNX 10-port fan hub, the APNX V2-F offers efficient cooling and effortless customization for high-performance builds.
The TR300 WS Mid-Tower Case is an ATX chassis with a front-mounted power supply for optimal space utilization, and supports AIO liquid coolers up to 360 mm for maximum cooling performance. It accommodates up to eight 120 mm fans and supports a radiator up to 360 mm on the top, offering flexible cooling solutions. The case supports Mini-ITX, Micro-ATX, and ATX motherboards; the power supply can be installed at four mounting points within the case, depending on the motherboard size. Maximize the visual effects of your TR300 WS Mid-Tower Case with an upgrade to our LCD screen kit. The 6-inch LCD display allows real-time monitoring and the upload of custom images or GIFs, adding extra flair with the latest TT RGB Plus software. Removable dust filters help keep your system clean while maintaining optimal airflow. For maximum storage compatibility, the case supports up to two 3.5-inch HDDs and three 2.5-inch SSDs for flexible installation.
The TR300 WS Mid-Tower Case is an ATX case with a front-mounted power supply for optimal space utilization, supporting AIO water cooling solutions up to 360 mm for maximum cooling performance. It accommodates up to eight 120 mm fans and supports a radiator up to 360 mm on the top, enabling flexible cooling solutions. The case supports Mini-ITX, Micro-ATX, and ATX motherboards; the power supply can be installed at four mounting points inside the case depending on the motherboard size. Maximize the visual impact of your TR300 WS Mid Tower Case by upgrading with our LCD Screen Kit. The 6-inch LCD display allows you to monitor real-time information and upload any images or GIFs for extra flair with the latest TT RGB Plus software. Removable dust filters help keep your system clean while providing optimal airflow. For maximum storage compatibility, the case supports up to two 3.5-inch HDDs and three 2.5-inch SSDs for flexible installation.
The TR300 TG Mid-Tower Case is an ATX case with a front-mounted power supply for optimal space utilization and supports AIO water cooling systems up to 360 mm for maximum cooling performance. It offers space for up to eight 120 mm fans and supports a radiator up to 360 mm on the top, enabling flexible cooling solutions. The case supports Mini-ITX, Micro-ATX, and ATX motherboards; the power supply can be installed at four mounting points inside the case depending on the motherboard size. Maximize the visual effects of your TR300 TG Mid Tower Case by upgrading with our LCD screen kit. The 6-inch LCD display enables real-time monitoring and uploading of any images or GIFs, adding extra flair with the latest TT RGB Plus software. Removable dust filters help keep your system clean while providing optimal airflow. For maximum storage compatibility, the case supports up to two 3.5-inch HDDs and three 2.5-inch SSDs for flexible installation.
The Grandia GD04 is an incredible product that combines years of SilverStone's expertise in SFF (Small form factor) and HTPC (Home Theater Personal Computer) chassis design. It has a beautifully proportioned exterior and powerful thermal capability that rivals the best tower chassis. From the front, the GD04 is shaped similarly to most home theater components, but the depth was reduced to a mere 323mm. This overall size of 21.5 liters in volume actually makes the case one liter smaller than SilverStone’s own Micro-ATX Sugo cases! Even though GD04’s diminutive size allows it to easily integrate into any home theater cabinet, it can still accommodate an impressive list of standard components such as 5.25” optical drive, two 3.5” hard drives, a 2.5” SSD, a standard ATX power supply, and two high-end graphics cards up to 11 inches. Cooling duty in the GD04 is handled by three filtered 120mm fans designed with the same positive air pressure as the Fortress FT01, this enables class-leading cooling efficiency, reduced dust buildup, and silent operation. To make installation simpler, there is even enough space for cable management to be easily accomplished without the need for short cabled or modular power supply. Coupled with the special attention given to the order of installation, any user can quickly assemble or upgrade the GD04 and devote more time to enjoying a personalized digital life with an HTPC.Format microATXMaximum graphics card lenght 279 mmMaximum CPU-Cooler Height 75 mmSpecial Featuress Luftöffnungen an der Oberseite and an der Seite, three 120-mm-Fan an den Seiten, Luftöffnung for ein Netzteil an der Unterseite, Vibrationsdämpfer for die Festplatten, ein Netzteil with einer Länge von up to180 mm einbaubarPower Supply SlotDesign ATXDrive Baysexternal 5,25 inches 1internal 3,5 inches 32,5 inches 2FansIncluded 3x 120 mmInstallable 2x 80 mmFront-SideSpecial Featuress Power- and Reset-button, Power-LEDPorts USB 3.0 2Audio 2Back-SideSlots Full-Size 4additional Full-Size 1Product dimensions 440 x
Cabinet Form Factor: Midi Torn Mainboard Form Factor1Supported Mainboard Form Factor: ATXMicro ATX 3.5-inch Internal Drivesahtleid12.5-inch Internal Drivesahtleid: 2 Expansion pesasi1(3.5-mm minijack x 2) Power seadme tüüp: toiteplokk Optional Power Device Location1Lisatarvikud: Screws Chassis Features1kg Pack kaal Netto (kg): 2.8 kg Pieces in pack1Box kaal Brutto (kg): 3.61kg Retail Packaging Netokaal Carton: 0.5 kg Retail Packaging Netokaal plastik1kg Packs in Box: 1EAN Code: 42604556435971
Dimensions: 202 x 438 x 384 mm (W x H x D) Material: steel, acrylic glass, plastic Weight: 3.2 kg Color: Black Form factor: ATX, Micro-ATX, Mini-ITX Fan possible: 3x 120 mm (front) 1x 120 mm (rear) 2x 120 mm (cover) 2x 120 mm (bottom) Fan pre-installed: 1x 120 mm (front) 1x 120 mm (rear) Drives: 2x 3.5 / 2.5 inches (internal) 4x 2.5 inches (internal) Power supply (optional): standard ATX Expansion slots: 7 I / O panel: 1x USB 3.0 2x USB 2.0 1x per audio in / out Maximum graphics card length: 305 mm Maximum power supply length: 150 mm Maximum CPU cooler height: 160 mm
The CORSAIR 2000D AIRFLOW is a Mini-ITX small-form-factor case with phenomenal cooling thanks to steel mesh front, side, and rear panels that deliver plentiful ventilation to your system.
The CORSAIR 6500X system cabinet is a mid-tower chassis designed for enthusiasts and professionals seeking a blend of aesthetics and functionality. With its tempered-glass side and front panels, it offers a sleek look while showcasing the components inside. The chassis supports a wide range of cooling options, including space for multiple 120 mm or 140 mm fans and radiators up to 360 mm, ensuring that even demanding systems stay cool. Compatibility with various motherboard form factors, from ATX to Mini-ITX, along with ample room for large video cards and power supplies, makes it a versatile choice for any build. Additional features such as a bottom dust filter, dual chamber layout, and a meshed top panel not only enhance the system's performance but also its longevity and ease of maintenance. Whether for gaming, content creation, or professional use, the CORSAIR 6500X offers a solid foundation for a high-performance PC.
Compact gaming case, made of high-quality steel, for SFX PSUs and Mini-ITX/Micro-ATX motherboards (Intel and AMD), GPU up to 363 mm and 2x 2.5-inch drives
