Tootekood: AIR 100 LITE (B)GTIN: 4710562740691Korpused
Small midi tower with tempered glass on the side, up to eight fans, space for a radiator up to 280mm, motherboards up to Micro-ATX, GPU up to 330mm and CPU cooler up to 161mm in height, up to four drives possible, two 120mm fans includedSmall case with tempered glass side panel Efficient cooling options with up to eight fans and radiators up to 280mm Support for motherboards up to Micro-ATX Space for graphics cards up to 330mm and CPU coolers with a height of up to 161mm Up to four drives possible Two 120mm fans included The Montech AIR 100 LITE: Minimalist case with high cooling performance The Montech AIR 100 LITE is the smaller variant of the Montech AIR 100 and impresses with its lightweight and minimalist design. Nevertheless, this midi tower offers extensive options for installing your hardware - particularly a variety of fans to keep your system cool. Well-cooled with fans and radiators Despite its small size, up to eight fans can be installed in the tower. The front supports a maximum of three 120mm or two 140mm fans. You can install two 120mm or 140mm fans at the top. A further 120mm fan can be installed at the rear, as well as up to two more 120mm fans above the power supply chamber. Two 120mm fans are already included at the front and rear. If you prefer water cooling - whether an all-in-one water cooler or a custom-built water cooling system - there are several locations where a radiator can be installed. The front supports a radiator up to a maximum of 280mm, the top supports a 240mm radiator, and another 120mm radiator can be installed at the rear. Hardware options The midi tower supports the installation of graphics cards up to 330mm in size. Motherboards up to Micro-ATX format are feasible. The CPU cooler should not exceed a height of 161mm. To store programs and games, up to four drives can be installed.
The Lian Li Vector V100 combines a stylish yet minimalist design with high compatibility and a special cutout for extra individuality. With this desktop case, you get the perfect frame for your next gaming PC. Black midi-tower with tempered glass on the side and front Supports motherboards up to ATX form factor and with back-connect design Optimal cooling with up to nine fans and radiator support up to 360 mm Room for graphics cards up to 415 mm and CPU coolers up to 180 mm in height Four 120 mm RGB fans included Cutout with removable cover for collectibles The Lian Li Vector V100: A midi-tower with stylish design and plenty of space for hardware With the Vector V100, you can express your personality. Thanks to tempered glass on the side and front, you have an unobstructed view inside your tower, while the LED strips are just the beginning of impressive RGB lighting. Make your build something special Directly behind the front of the V100 case is a cutout. Whether for figures or other collectibles – you can showcase your interests here. If you don't need the cutout, you can simply cover it with the removable lid. Extensive cooling options Four 120 mm ARGB fans are pre-installed in the case – three reverse fans on the side and one standard fan at the rear. Thanks to their reverse fan blades, the side-mounted fans provide efficient airflow – and look just like regular fans. Additional options for installing extra fans can be found on the top and bottom. If you prefer water cooling, you can also install a radiator up to 360 mm on the top. The dust filter at the bottom is easy to remove, so you can clean it whenever necessary. Easy installation of your gaming hardware The Vector V100 offers ample space for your components – even high-end hardware. Thanks to support for motherboards with back-connect design and tidy cable management, you’ll make your build a real eye-catcher.
The ULTITUBE D5 PRO LEAKSHIELD from Aquacomputer, comes as a combination, consisting of expansion tank and leakshield. The borosilicate glass expansion tank, with a diameter of 65mm, has a very high hardness and scratch resistance, as well as very low thermal expansion and excellent chemical and thermal resistance. The base and the lid of the reservoir are made of acetal. In addition, a filter element is integrated in the base, which is easy to clean under running water, for example. The filter also reduces air bubbles. The ULTITUBE is rounded off with an impressive RGBpx-compatible LED ring, with 13 addressable LEDs. This can be easily connected to the D5 NEXT pump. With the LEAKSHIELD, the user almost no longer needs to worry about the tightness of his water cooling. Thanks to its negative pressure, the LEAKSHIELD actively protects against leaks. This means that no more coolant leaks out of the system. Of course, it does not protect against major damage, such as torn tubes. The air that enters is then pumped out of the system by the integrated vacuum pump. Even before the water cooling system is put into operation for the first time, the LEAKSHIELD checks the system for leaks by creating a vacuum. The system is then checked for pressure changes. It can also simplify filling by drawing the coolant directly from the bottle through a suction line. Technical Data: Coolant capacity: approx. 350 ml Connection threads: G1/4 D5 NEXT Supply voltage: 5V, 12V D5 NEXT Maximum power consumption: 65 W (including fan and RGBpx output) D5 NEXT Maximum fan output power: 25 watts D5 NEXT Maximum pump head: 3,7 m / 370 mbar LEAKSHIELD Generated negative pressure: max. -450 mbar LEAKSHIELD Supply voltage: 5 V DC via USB LEAKSHIELD Current consumption: max. 500 mA Dimensions incl. D5 NEXT pump and LEAKSHIELD: approx. 72 x 77 x 277 mm (All dimensions without mounting material) The number 100/150/200 in the Ultitube series product name refers to the length of the glass tube in millimeters. Scope of delivery: One reservoir with integrated pump RGBpx compatible LED ring RGBpx cable, length 50 cm Rubber fixation ring with stainless steel insert Two internal USB cables, length approx. 100 cm Mounting material System requirements Windows 8.1 or newer Internal USB 2.0 port
