Horizon ARGB FLOW Midi White Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
Compact dual-chamber midi tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case lid for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 in the front panel
XG172 | MidiTower | PSU Not included | Cooling Fan Support (mm): Side:2x 120mm Top:3x120mm / 2x140mm Rear:1 x 120mm Bottom: up to 3 x 120mm | Dimensions 421 x 220 x 490mm
No. of drive bays: 6 Dimensions: 455 x 205 x 475 mm Weight: 5.27 Other features: - Steel thickness: 0.7 mm- Full side and top panel (no ventilation openings on top)- 2mm thick soundproofing panel on the right, left, top and front panels- 2 x fan on the front + 1 x rear fan
Atos Logic Atos is a case created to build a powerful and modern gaming PC. Optimal airflow, practical solutions and the pre-installed ARGB fans define its gaming character. READY FOR GAMING Logic Atos is a case created to build a high-performance and modern gaming PC. Optimal airflow, practical solutions and the pre-installed ARGB fans add to its gaming character. INDUSTRIAL STYLE The front panel designed in a strikingly similar industrial style not only fits perfectly into the gaming PC, but also ensures excellent air circulation. TEMPERED GLASS As befits a gaming PC case, Logic Atos features tempered glass on the side of the case. It was intentionally limited to the side panel only, in favour of the airy front panel. 160 mm CPU COOLING The mounting space for a CPU air cooler with a maximum height of 160 mm is an optimal amount of space for powerful cooling systems, especially for such a compact case. In addition, the possibility to mount graphics cards up to 290 mm allows the installation of most high-performance components available on the market. OPTIMAL AIRFLOW The ventilated front panel provides an air intake with two high-performance 120mm fans. This effectively cools down the installed components inside the PC, and has a positive impact on the cooling performance and service life of the PC components. As an option, two 140 mm fans can be installed at the front of the case instead of the pre-installed ones. ARGB BEAUTY A gaming case has to look good. This is why the pre-installed ARGB fans add to the beauty of the case and the gaming stand. The colour of the backlighting can be freely changed from the predefined settings by pressing the RESET button on the case control panel. HOME & OFFICE Despite its gaming pedigree, the case is also suitable for office tasks and everyday work. The possibility to build a versatile and high-performance PC is a definite advantage. OPTIMISED AND PRACTICAL SOLUTIONS The installation of HDD or SSD is of course also well thought out here. Inside the case, there is a basket for 2 x 3.5 or 2.5 HDDs at tunnel level and on the mainboard tray, an additional 1 x 2.5'' drive can be installed (prior to the installation of the mainboard). SIMPLE INSTALLATION Everything here is well thought-out and intuitive. Building a PC with this case is a pleasure and is child's play. CONVENIENT ACCESS TO THE TOP PANEL Convenient access to the top panel with two USB 2.0 and one USB 3.0 ports, HD audio jacks for headphones and microphone, power and reset button (for controlling the ARGB backlighting). POWER SUPPLY IN THE TUNNEL The small openings under the PSU mounting position act as a filter to prevent dust and dirt from entering the case. At the same time, they provide an air flow to the PSU. 4 PCIe expansion card slots Four PCIe extension card slots. This is the optimal number for the installation of e.g. graphics cards and network cards. IDEAL FOR EVERY ROOM Supporting mini-ITX and Micro-ATX motherboards, it is a compact solution for building a computer for study, work and play. It takes up less space in the room than other standard ATX cases, yet is highly functional.
Arx 500 Air We've always had a sneak peek at the housings and we've seen a lot - and the sight of Arx 500 Air still makes us look like a big banana. No wonder, because we packed all our knowledge into it. Spoiler alert - it turned out like a dream. This is one of the largest (slightly shorter than the Arx 700 series) cases we have created. It is 486×228×429 mm - this is easily enough for, among others, a high cooling system (up to 179 mm), 7 fans (including 5 Stratus 140 PWM fans, which we provide at the start) and most graphics cards available on the market (up to 350 mm). . Everything sits in a pleasant draft, because the finely perforated front and top panels let in fresh air and block dust. You can check it through a tempered glass window.
The Lian Li LANCOOL 216 RGB White E-ATX Case is a stylish mid-tower case designed for E-ATX motherboards. It features three radiator mounts for water cooling (1x 240mm / 2x 360mm), a tempered glass side panel, and comes with three pre-installed fans (2x 160mm ARGB / 1x 120mm). It also includes a fan and ARGB hub for easy customization and control.
ANTILA 39 Computer Midi Tower ATX PC Case. The computer case is equipped with three USB ports. The structure of the housing in black color gives elegance and the cable arrangement system allows you to organize the interior. At the top there is a ventilation grille with space for additional 120 mm fans and at the bottom there is a pollen filter.
Portos ARGB Mini Black Logic Portos ARGB Mini is a chassis created to build a powerful and modern gaming PC. WHEN IT'S THE INSIDE THAT COUNTS... Are you building a computer for gaming? And you want it to not take up too much space on your desk? Then of course you need a well-thought-out, well-designed and good-looking MINI ATX-sized case. Preferably still one with three mounted ARGB fans, an airy front and top, dust filters, and the side panel was made into a tempered glass door. This is where Case Logic Concept Portos ARGB MINI comes to the rescue. A concrete competitor for gaming tasks, providing good airflow, component culture, their safety and low temperatures of installed components. OPEN YOURSELF TO NEW A side panel made of tempered glass in the form of a hinged door makes it easier not only to install components, but also to keep the computer clean. Just open the door and clean the center with compressed air. Isn't it simple and practical? It's the only one we want to give you, because they simply belong to you. TO HOT COMPONENTS SAY "NO" An airy front and top panel significantly facilitates air circulation. Two 120 mm fans on the front and one 120 mm fan on the back Cases effectively cool the heated components. All for your comfort and the safety of your computer. Always willing to play Logic PORTOS ARGB MINI is a case created to build an efficient and modern gaming PC. Optimal airflow, practical solutions and pre-installed ARGB fans make up its gaming character. READY FOR GAMING COMPONENTS The ability to mount graphics cards up to 340 mm and a maximum CPU cooling height of 155 mm allows the installation of most high-performance components available on the market. PROTECT YOUR COMPUTER FROM DUST DUST FILTERS A dust filter has been placed under the power supply unit. It minimizes the amount of dust sucked in by the PSU's fan, positively affecting its operating temperature and service life. An additional filter is located on top of Cases. This effectively traps unwanted dust and protects the installed components. It protects against dust that enters the computer by gravity throughout the day, even when the computer is turned off. All the effective protection is complemented by mesh mesh on the front panel. OPTIMAL AIR CIRCULATION The ventilated front panel provides airflow with two, efficiently operating 120 mm fans. The back of Cases , on the other hand, features one pre-installed 120 mm fan This allows you to effectively cool the installed components of the computer's interior, positively influencing the culture of their operation and service life. As an option, it is possible to mount two 140 millimeter fans on the front of Cases in place of the factory-installed ones and two 120 or 140 millimeter fans on the top on their own. Case It is also adapted for installation of water cooling. ARGB BEAUTY Case for gamers must look nice. That's why the pre-installed ARGB fans add beauty to the case and the gaming stand. The color of the backlight can be changed at will from the predefined settings using the button on the control panel Cases. Convenient access to the top panel Convenient access to the top panel, and there are two USB 2.0 and one USB 3.0 connectors, plus one minijack connector for headphones and microphone, a power button and a button to control the fan backlight. SIMPLE INSTALLATION Everything here is well thought out and intuitive. Building a computer in this case is a pleasure and is child's play. POWER SUPPLY A gaming computer must have a good and powerful power supply. That's why we made sure that it has a home here! The maximum length of the power supply with the disk cage installed is 200 mm. A dust filter has been placed under the power supply, which effectively protects the operation of the power supply from dust 4 PCIe expansion card slots Four slots for PCIe expansion cards. This is the optimal number for mounting, among other things, a graphics card and a network card. SPACE FOR GAMES IN ABUNDANCE The mounting of HDD or SSD drives is obviously thought out here as well. Inside Cases at tunnel level there is a basket for 3.5" or 2.5" drives. On the motherboard tray, on the other hand, it is possible to mount an additional 2.5" drive. A total of 2 SSDs and 1 HDD or 1 SSD and 2 HDDs can be installed.
The Zalman i3 NEO ATX Mid Tower in white is a versatile and stylish computer case designed to support a wide range of form factors including Midi Tower, Mini ITX, Micro ATX, and ATX. It features a clean white design complemented by four ARGB fans, enhancing both its aesthetics and cooling performance. The case offers ample storage options with 3x 2.5" internal bays and 2x 3.5" bays. For connectivity, it is equipped with a comprehensive I/O panel that includes reset and power buttons, 2x USB 3.0 ports, 1x USB 2.0 port, and ports for a headphone and a microphone. The case measures 422 x 219 x 484 mm and weighs 5.6 kg, making it a compact and manageable option for building a high-performance PC.
The H5 Flow features a perforated front panel to generate an extra dimension of airflow for maximum cooling potential. With optimized thermal performance and intuitive cable management, the H5 Flow is an ideal chassis for most builds.
Zalman P50 DS ATX Case with Tempered Glass and Panoramic View - White The Zalman P50 DS ATX case in stylish white offers demanding PC builders and gamers the perfect combination of aesthetics and functionality. With a generous Panoramic View side panel made of tempered glass, this case presents the installed components in a clear and modern design. The spacious interior layout supports a variety of high-performance components and is therefore ideal for complex builds. Main features of the Zalman P50 DS case in white: Panoramic Tempered Glass Side Panel : Provides an unobstructed view of the hardware and gives the system a sleek look. Generous ATX Format : Supports ATX, Micro-ATX and Mini-ITX motherboards, ideal for powerful high-end builds. Optimized cooling performance : Space for multiple fans and water cooling for efficient heat dissipation and stability in intensive applications. Elegant white design : Timeless white that fits into any environment and creates a modern look. The Zalman P50 DS case in white is the ideal choice for PC enthusiasts looking for a high-quality case with an attractive design and high functionality. The combination of Panoramic View and high-quality tempered glass makes it the perfect basis for a stylish and powerful PC build.
The ASUS A21 Plus system cabinet is a testament to functionality meeting aesthetics in PC building. Designed to accommodate microATX form factors, it supports a wide range of motherboards from Mini-ITX to microATX, ensuring compatibility for various builds. The chassis is not only practical with its extensive cooling support, including space for up to 3 credit cards 120 mm fans at the front, a 120 mm fan at the rear, and options for additional fans or radiators on the top, but it also boasts a visually appealing design with ARGB fans and a tempered-glass side panel. Internal bays are plentiful, with capacity for both 2.5" and 3.5" drives, facilitating ample storage solutions. Features like the meshed front panel, top and bottom dust filters, and a dedicated cable management system underscore the cabinet's commitment to both form and function. Whether for gaming, content creation, or everyday use, the ASUS A21 Plus offers a solid foundation for building a system that looks as good as it performs.
The ASUS TUF Gaming GT502 Horizon is designed for gamers seeking a reliable and spacious tower chassis. This mid-tower features a dual chamber layout that optimizes airflow and organization, allowing for efficient cooling and easy cable management. With multiple dust filters located at the side, top, and bottom, maintaining a clean internal environment is effortless, which is essential for ensuring long-term performance and system longevity. Equipped with tempered-glass panels on the front and left side, the GT502 Horizon provides a clear view of internal components, highlighting your custom cooling and RGB lighting configurations. It supports a wide range of cooling options, accommodating up to a 360 mm radiator or up to three 120 mm fans, ensuring that your high-performance hardware remains cool even during intense gaming sessions. With fully modular side panels and tool-less access, upgrading and maintaining your system becomes a hassle-free process.
Xtender VG (White) | PSU Not included | 2x P12 Pro A-RGB (pre-installed at rear), 3x P14 Pro Reverse A-RGB (pre-installed at side) | Dimensions 529 x 231 x 529 mm
