With the D32 series, Jonsbo targets everyone who wants to build their system in a space-saving way. Compared to the D32 PRO, the D32 STD PC case offers the most important features such as back-connect or minimal front I/O, catering to the midrange and budget segment. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for back-connect motherboards Tempered glass side panel ensures a subtle appearance Plenty of space for cooling solutions allows the installation of powerful hardware Dust filter protects your hardware from annoying dust particles The Jonsbo D32 STD Black: Space-saving and subtle case for all kinds of hardware Whether it's a midrange HTPC or a high-end PC, the D32 STD Black from Jonsbo comfortably accommodates various types of builds. The compact case supports graphics cards up to 365 mm in length and CPU coolers up to 164 mm in height. This means that even with the compact design of the case, adequate cooling for your hardware is ensured. Working with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the fans provide tremendous airflow inside the case. No cable clutter with back-connect With back-connect motherboards such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case remains almost completely free of visible cable clutter while using the same amount of space. Since most power and connection cables can be connected at the back of the motherboard, you save on cable management and still get a clean look in your case. Together with the tempered glass side window, your hardware is presented in an especially appealing way. Powerful cooling in a small space To ensure your powerful hardware is sufficiently cooled even in this compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for ample airflow, a large dual-tower CPU cooler, or even a 240 mm AIO, your hardware stays cool even under heavy loads. The dust filter on the bottom and the mesh side panel design ensure your hardware remains free of dust and dirt. This keeps your temperatures at optimal levels and helps extend the lifespan of your hardware.
Darflash FT350 computer case + 5 aRGB fans (black)Darkflash FT350 is a compact computer case designed for users who appreciate both aesthetics and functionality. It is equipped with three transparent tempered glass panels and five ARGB fans, so it perfectly combines cooling performance with a modern gaming design. It's also compatible with a wide range of popular components, so you can build a computer perfectly suited to your needs.Robust and spacious designThe FT350 case is made of durable metal (0.5 mm SPCC steel), which ensures its stability and strength. Despite its small size, it is very spacious - it allows you to mount a graphics card up to 330 mm long, a PSU up to 160 mm long and a CPU cooler up to 157 mm high. It also features compatibility with M-ATX and ITX motherboards. All this makes it easy for you to assemble a high-performance gaming or office PC!Advanced cooling systemThe FT350 allows you to create an extensive heat dissipation system - it will accommodate up to 7 fans. You can also install 240 mm water cooling in it. All this will allow you to freely play dynamic games or create complex graphics projects - without worrying that the computer will overheat! What's more, you'll find five powerful ARGB fans included, which are distinguished not only by their high efficiency, but also by their modern, stylish design.Various storage optionsThe Darkflash FT350 enclosure can support two 2.5" SSDs or one 3.5" HDD, allowing you to flexibly customize your storage. This is ideal for those who plan to store a lot of files, such as photos, videos or documents.Key ports and buttonsThe FT350's top panel features one USB 2.0 port and one USB 3.0 port for high-speed data transfer. So you can conveniently transfer files and connect peripherals of your choice! There is also an audio jack port, a Reset button and a power button.Unique panoramic perspectiveThe case is distinguished by three transparent panels made of tempered glass, so it provides a wide, panoramic view of the computer interior. Such a solution allows you to highlight individual components in an original way! For example, use components with RGB backlighting to give your equipment a unique gaming character. ManufacturerDarkflashModelFT350Housing typeMini TowerSide panelTempered glassMotherboard standardM-ATX / ITXSlots for internal disks / drives3.5" HDD x1 / 2.5" SSD x2Expansion card slots4Maximum PSU length160 mmMaximum length of graphics card330 mmMaximum height of CPU cooler157 mmMaximum number of fans7Fan mounting optionsTop: 2x 120 mm fan; Side panel: 2x 120 mm fan; Bottom: 2x 120 mm fan; Rear: 1x 120 mm fan;Water cooling mounting optionsTop: 1x 240 mm water cooling;Number of fans installed5Buttons and controlsPower button, Reset buttonConnectors1x audio jack, 1x USB 3.0, 1x USB 2.0Material0.5 mm SPCCColorBlackIncluded accessories5x ARGB fanHeight375 mmWidth280 mmDepth350 mmWeight4 kg
The der8enchtable is a collaboration between Thermal Grizzly, Jon “elmor” Sandström (ElmorLabs), and Roman “der8auer” Hartung. In addition to the features of a standard benchtable—such as integrated mounts for radiators and a power supply—the der8enchtable includes a base unit with an integrated printed circuit board (PCB) for connecting the hardware under test. For consistent test results, fans can be controlled via three fan controllers, each providing three 4-pin fan headers. Each fan zone can be switched independently to 50% or 100% speed, supplies 3 A of power to the fans, and is protected by its own fuse. Additionally, the der8enchtable’s fan zones can be managed externally by the motherboard. Professional benchtable with active PCB Developed in collaboration with ElmorLabs and der8auer 3+1 control zones for fans and AIOs Supports SSD, USB, or microSD for OS and test software Compact, modular, and user-friendly frame design Compatible with air and AIO coolers A-RGB lighting In addition to the fan-control zones, the base unit with integrated PCB offers a secondary control zone with two 4-pin headers for pumps or fans, featuring the same control options as the fan zones. The pump zone supplies 3 A per port—6 A total—and each port has its own fuse. Peripherals can be connected to the der8enchtable via USB (4× Type-A, 2× Type-C). Testing and benchmarking hardware typically requires drivers, a BIOS, or an operating system. To simplify this, storage media can be mounted directly on the benchtable. Up to two 2.5-inch SSDs can be installed on the PCB, and the PCB also provides four microSD card slots—a cost-effective alternative to solid-state drives (SSDs) in terms of price per gigabyte. The test motherboard is connected to the der8enchtable via the 9-pin USB header. The der8enchtable itself is powered by the PSU via a PCIe 6-pin cable. For control of the addressable RGB lighting (aRGB), the der8enchtable can be connected to the motherboard via a 3-pin header. Alternatively, an external RGB controller may be used (not included). A power button and reset function are also provided on the PCB and wired to the motherboard. The der8enchtable’s PCB features preinstalled standoffs for ATX motherboards, which can be reconfigured for Micro-ATX and Mini-ITX boards. On the lower section of the black-anodized aluminum frame, a power supply can be mounted, and a custom-cuttable Velcro strap is provided for cable management. If the lower frame section is not needed, the feet can be attached directly to the base unit with integrated PCB, making the der8enchtable significantly more compact. Port Overview: 1× 9-pin USB header (data connection to motherboard) 1× PCIe 6-pin header (power supply from PSU) 1× 4-pin header (for PWM signal to external fan control) 3× Fan Zones (each with 3× 4-pin fan headers) 1× Pump Zone (2× 4-pin pump headers) 4× MicroSD slots for memory cards 2× On-board SATA connectors 2× SATA out connectors 4× USB 2.0 Type-A (max. 500 mA) 2× USB 2.0 Type-C (max. 3 A) 1× 2-pin header for power button 1× 2-pin header for reset button 1× 3-pin aRGB header (GND / – / D / 5V)
ProArt PA602 ProArt PA602 E-ATX computer case, 420 mm radiator support, one 140 mm and two 200mm pre-installed system fans, front panel IR dust indicator, power lock latch, tool-less PCIe mounting, USB 20Gbps support Superior Airflow: 15.5 mm front panel grill with 45% porosity, two extra-thick 200 x 38 mm front fans for maximum air intake, and a 140 mm rear exhaust fan Superior Thermals: Two deflectors send incoming air towards the motherboard and other internal components to optimize temperatures Ample Space: Supports one 420 mm radiator for AIO cooling or custom liquid-cooling loops and the most robust graphics card get ample room for horizontal or vertical mounting Extensive I/O: Power Lock Latch and 2-section PWM control; USB Type-C 20Gbps port Front Panel IR Dust Indicator: Timely reminders to clean the filter to maintain top-tier airflow Creator-Friendly Design: Tool-less graphics card mounting, integrated graphics card holder and built-in fan hub come together to amp up the building experience Elegant aesthetics: Minimalist case adorned with ProArt themed design
- Elegantne disain teemandiosaga - Koonusekujuline disain tagab mugavuse ja stabiilsuse - Saab kuumutada või jahutada temperatuurimängude jaoks - Mugavaks ja kontrollitud kasutamiseks - Püsib kasutamise ajal paigal See luksuslik anaaltapp Rosy Gold kollektsioonist on elegantse disainiga ja valmistatud nahasõbralikust alumiiniumist. Soovi korral võid seda soojendada või jahutada, et kogeda erutavat temperatuurimängu. Koonusekujuline mudel muudab sissetoomise mugavaks ning lai alus hoiab tappi turvaliselt paigal. Sobib kasutamiseks nii vee- kui ka silikoonipõhiste libestitega. Kogupikkus on 9,5 cm, sisestatava osa pikkus 8 cm ning suurim läbimõõt 3,4 cm.
The IT-5905 is a modern Midi-Tower with a robust and compact design. It knows to convince due to its user-friendly assembly of front connectors in the upper part of the front panel.Besides the design, the IT-5905 convinces with space for up to four optional coolers, several mounting options for 3.5" and 2.5" HDD´s and space for graphics cards with a length of 32cm.Two USB 3.0 front connectors and a depot in the cap (for USB-sticks for example) complete the offer and make this case a real all-rounder.KujutegurMiditornTüüpPC5,25" lahtrite arv33,5" lahtrite arv4Emaplaadi toetatud kujuteguridATX,Micro-ATXToote värvMustAknagaJah2,5" salvede arv2Sisemiste 3,5" salvede arv3Väliste 5,25" kettalahtrite arv3SobilikKodu/kontorGraafikakaardi maksimaalne pikkus32 cmKaasas toiteplokkEiUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahMaksimaalne esiventilaatorite arv1Toetatud esiventilaatorite läbimõõt120 mmMaksimaalne küljeventilaatorite arv2Toetatud küljeventilaatorite läbimõõt120 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt80,120 mmToetatud kõvakettasuurused2.5,3.5"JuhtmehaldusJahLähtestusnuppJahLaius200 mmSügavus415 mmKõrgus410 mm
RIGHT SIZES SMOOTHER MOVEMENTThe amazing DASHER EXTENDED offers a bigger space for you to move your mouse! This amazing 900mm wide smooth surface type mouse pad is big enough for large gaming keyboards, with plenty of room left over for your gaming mouse! Definitely the right choice for you who needs bigger room for intense games! In addition, these mouse pads were created with solid sewing edge of the mouse pad ensures long-term durability, preventing peeling or warping problem for you to move your mouse smoothly with consistency!SPEED-TYPE STUNNING MOUSE PADTt eSPORTS's Speed-type mouse pads are incredibly smooth and flat. It allows gamers to have precise movements with comfortable feeling (FPS & RTS & MMORPG Games). Speed-type mouse pads best suit gamers who need to hit targets faster and more efficiently!SEMI-COARSE TEXTURed WEAVE MOUSE PADA smooth surface designed to allow you almost effortless mouse movement. DASHER new edition mouse pads deliver excellent glide characteristics that offer total tracking responsiveness for consistently reliable in-game control!ANTI-SLIP RUBBER BASEA special non slip rubber base ensures that DASHER New Edition mouse pads will not slip as you game, even in the most intense of battles. Play with confidence and never worry about mouse pad lift-off or slipping again - even on glass desks!SpecificationDimension (L x B x H): 900 x 400 x 4 mmMaterial: Cloth Weave MaterialBase: Polyurethan Genre: FPS, RTS, MMORPGColor: BlackOther Features. Ideal for Game Genre requiring rapid movement from point A to point B Type Mouse Pad Material Synthetic Fibre Colour Black Width (mm) 900 Height (mm) 4 Depth (mm) 400
No. of drive bays: 3 MOLEX power connectors: 2 Floppy power connectors: 0 SATA power connectors: 2 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 1 Number of power supply connector 4+4-pin 12V: 0 8-pin 12V power connectors: 0 Dimensions: 290mm x 92,5mm x 280mm Weight: 3
Schickes Gaming-Gehäuse aus hochwertigem Aluminium in Schwarz, zwei Seitenteile aus Hartglas, für mATX- und Mini-ITX-Mainboards (Intel & AMD), für ATX- und SFX-(L)-PSUs, Platz für 360-mm-Radiator, Dual-Slot-Grafikkarte bis 41 cm, integriertes Riser-Modul mit PCIe 3.0
Tootja koduleht: http://www.asus.com/Motherboards-Components/Gaming-Cases/TUF-Gaming/TUF-Gaming-GT301/ Mõõtmed: 214 x 482 x 426 mm (L x K x S) Kaal: umbes 7,2 kg Materjal: teras (šassii, ees), karastatud klaas (külgpaneel), plastik (ees, sisend- / väljundpaneel) Värv: must Kujutegur: ATX, Micro-ATX, Mini-ITX Paigaldatud ventilaatorid: 3x 120 mm (ees, D-RGB-LEDid) 1x 120 mm (taga) Kokku võimalik paigaldada: 2x 140 / 3x 120 mm (ees) 2x 120 mm (peal) 1x 120 mm (taga) Radiaatori kinnitused (HDD ja / või ventilaatori pesade osaline loobumine): 1x max. 280/360 mm (ees) 1x max. 120 mm (taga) Filter: ees, üleval, toiteallikas (eemaldatav) Kettabaasid: 2x 3,5 tolli / 2,5 tolli (sisemine; lahti ühendatud) 4x 2,5 tolli (sisemine) Toiteallikas: 1x tavaline ATX (valikuline) Laienduspesad: 7 I/O paneel: 2x USB 3.0 tüüp A (USB 3.1 Gen1) 1x heli sisse / välja 1x RGB-LED juhtimine Graafikakaardi maksimaalne pikkus: 320 mm Maksimaalne protsessori jahuti kõrgus: 160 mm Toiteallika pikkus kuni: 160 mm Komplektis: 1x ASUS TUF GT301 korpus 4x 120 mm ventilaatorid (eelinstallitud) 25x kruvi põhiplaadi ja 2,5-tolliste draivide jaoks 8x kruvi 3,5-tolliste ajamite ja toiteallika jaoks 1x Phillipsi adapter vahetükkide jaoks 8x kaablikinnitust 2x kummikorgid graafikakaardi jaoks 1x hoidik kruvidega kõrvaklappide jaoks 3x takjakinnitusega kaablisidemed
