Product kirjeldus: AORUS C700 GLASS - FT - ATX Product Type: System cabinet Form Factor: Full Torn värv: must I/O Ühendusi: 1 x USB 3.1 Gen 2 4 x USB 3.0 1 x HDMI 1 x microphone 1 x kõrvaklapid Supported Motherboards: ATX, microATX, Mini-ITX, Extended ATX System Cabinet Features: Supports Kuni 360 mm radiator in front panel, toetab Kuni 140 mm radiator in rear panel, 2 tempered glass side panels, ARGB controller, RGB Fusion 2.0, toetab Kuni 420 mm radiator in top panel Power Device: No toiteplokk Specification Compliance: ATX mõõtmed (WxDxH): 30.1 cm x 71.4 cm x 67.1 cm kaal: 19.2 kg
MÕÕTMED: 215 x 473.5 x 454 EMAPLAADI TUGI: Mini ITX; Micro ATX; ATX GRAAFIKAKAARDI PIKKUS KUNI: 405 mm PROTSESSORI ÕHKJAHUTI KÕRGUS KUNI: 170 mm TOITEPLOKI ÜHILDUVUS: ATX; 17 cm KAABLITELE RUUM: Olemas KAAL: 7.2 kg Ühenduvus I/O PANEEL: 1 x headphones; 2 x USB 3.0; 1x microphone PCI PESASID KUNI: 7 Kettasahtlid: 4x 2.5" pesa 3x3.5" Ventilaatoritugi: ÜLESSE PAIGALDATUD - 1x Aspect 12 RGB ETTE PAIGALDATUD -2x Aspect 12 ÜLESSE VÕIMALIK PAIGALDADA 2x120/140 TAHA VÕIMALIK PAIGALDADA 1x120 ETTE VÕIMALIK PAIGALDADA 2x120/140 Radiaatoritugi: ÜLEVAL - 240 mm
CORSAIR 3000D RGB mid-tower Tempered Glass Black The CORSAIR 3000D RGB AIRFLOW mid-tower ATX case features intensive airflow powered by three high-performance factory-mounted CORSAIR AR120 RGB fans for superior cooling and fantastic lighting effects. The addition of a tempered glass side panel turns your PC into a state-of-the-art computer technology display. The intelligently laid out interior holds up to 8 x 120mm fans or 4 x 140mm fans. With room for radiators up to 360mm in size, support for 3.5" and 2.5" drives, and support for four-slot graphics cards up to 360mm in length, you can create a high-performance system. The front I/O panel has two USB 3.2 Type A ports and a microphone and headphone jack. Outstanding Cooling Capabilities: Spacious interior holds up to 8 x 120mm cooling fans or 4 x 140mm fans with multiple heatsinks including one 360mm front and one 280mm on top (depending on the height of the memory modules) RAM). A complete mid-tower package: A mid-tower ATX case with a sleek, high-airflow design and three pre-installed CORSAIR AR120 RGB fans for superior cooling and compelling lighting effects. Dedicated graphics card cooling: The case accommodates the latest graphics cards and has two additional 120mm fan mounts on the PSU shroud that allow you to install fans directing the airflow directly to the graphics card. Three-slot graphics support: For an advanced, high-performance computing setup, you can freely install a three-slot graphics card up to 360mm in length into the chassis. Optimized front panel for intensive air circulation: The optimized steel front panel provides powerful airflow in the system for maximum cooling. Tempered glass side panel: Show off your internal components in elegant style All the storage you need: Holds up to 2 SSDs and 2 HDDs.
ANTILA 39 Computer Midi Tower ATX PC Case. The computer case is equipped with three USB ports. The structure of the housing in black color gives elegance and the cable arrangement system allows you to organize the interior. At the top there is a ventilation grille with space for additional 120 mm fans and at the bottom there is a pollen filter.
Mid Tower Ceres 300 TG ARGB case The Ceres 300 TG ARGB Mid Tower Chassis is an ATX case shipped with two CT140 ARGB Sync PC cooling fans pre-installed on the front and one CT140 PC cooling fan pre-installed on the rear. Over 55% of the panels are perforated to provide ample airflow and support up to a 360mm radiator at the front and a 280mm radiator at the top. Mid Tower Ceres 300 TG ARGB case The Ceres 300 TG ARGB Mid Tower Chassis is an ATX case shipped with two CT140 ARGB Sync PC cooling fans pre-installed on the front and one CT140 PC cooling fan pre-installed on the rear. Its RGB lighting can be controlled via motherboard software from ASUS, GIGABYTE, MSI and ASRock. As many as 55% of the panels are perforated to ensure high air flow. Besides, a maximum of five 140mm fans or seven 120mm fans can be installed in the case, one 360mm radiator can be placed in the front and a maximum of one 280mm radiator in the top of the case, providing countless hardware options. Built for enormous airflow More than 55% of the panels are perforated With a large number of perforated cutouts, the Ceres 300 TG ARGB is designed for excellent cooling performance. Supports radiators with a diameter of up to 360 mm at the front and 280 mm at the top Our Ceres 300 provides many options for cooling components. Users can place a 360mm radiator at the front and a 280mm radiator at the top. Two CT140 ARGB Sync cooling fans and one CT140 cooling fan installed Ceres 300 TG ARGB is equipped with two 140 mm ARGB PWM fans at the front and one 140 mm PWM fan at the rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying extreme cooling performance. Air inlet and outlet The cooling performance of the Ceres 300 TG ARGB is extraordinary with two CT140 ARGB Sync PC cooling fans pre-installed at the front and one CT140 PC cooling fan pre-installed at the rear. In addition, over 55% of the panels are perforated, ensuring huge airflow through the perforated cutouts. Perfect protection against dust There are fine, removable filters on the top, front, bottom, left and right sides of the housing that provide excellent protection against dirt and can be easily removed for cleaning.
Experience a dynamic and efficient design with the Acer Predator MI900 tower chassis, crafted for gamers and PC enthusiasts. Featuring a mini-ITX form factor, this case includes ARGB lighting that adds a visual element to any setup. With a windowed side panel, users can show off their components while the meshed top enhances airflow for cooling performance.Convenience is key with toolless PCI slot covers and device installation, making upgrades and maintenance hassle-free. Internal organization is addressed with two 2.5" expansion bays, ensuring ample storage for all essential components. The cooling system supports dual 120 mm fans or a 120/240 mm radiator, catering to varying cooling needs without compromising space or aesthetics. Equipped with multiple front panel connectors, including USB-C, the Acer Predator MI900 stands ready to meet connectivity demands.
Showcase case in white, vertical GPU kit with PCIe 5.0, with curved tempered glass, up to 11x 140 mm fans, space for two 420 mm radiators simultaneously, motherboards up to E-ATX, and GPUs up to 470 mm, two PWM fan hubs included
Showcase case in black, with curved tempered glass, up to 11x 140 mm fans, space for three 420 mm radiators simultaneously, motherboards up to E-ATX, and GPUs up to 480 mm, includes two PWM fan hubs
The Phanteks NV9 MK2 is perfect for enthusiasts who want to showcase their hardware spectacularly while ensuring strong cooling performance. With its generous use of Tempered Glass and subtle DRGB lighting, you can impressively highlight your components, while the thoughtful ventilation system ensures optimal airflow. Ideal for you if you value aesthetics, functionality, and compatibility with back-connect motherboards. Elegant showcase case with excellent cooling performance Side and front panels made of Tempered Glass for a panoramic view of your hardware Optimal cooling with space for up to 11x 140mm or 12x 120mm fans Radiators possible on the top, bottom, side, and back Space for graphics cards up to 490mm in length Supports large motherboards up to E-ATX Back Connect: compatible with ASUS BTF and MSI Project Zero Space for large CPU tower coolers up to 205mm in height Integrated D-RGB lighting with built-in controller Phanteks NV9 MK2 Big Tower: Panoramic view now with Back Connect With the Phanteks NV9 MK2, you don’t compromise on cooling and presentation for your hardware. The left side panel and seamlessly integrated front are made of Tempered Glass and provide a superb panoramic view of your components. The pre-installed but subtle DRGB lighting enhances the look of the case and further highlights your hardware. Strong cooling performance for your components In developing the NV series and particularly the NV9 MK2, PHANTEKS focused on cooling the components from the start. The case is therefore designed to be very open and aimed at uninterrupted airflow. The top and part of the right side cover are made of mesh, ensuring good air throughput. The bottom is sloped and provides ample space with a maximum distance of 65mm to guide fresh air into the case. Many mounting options for better cooling The PHANTEKS NV9 MK2 offers numerous options for fan installation to optimally cool your hardware. You can accommodate a total of eleven 140mm or twelve 120mm fans, ensuring effective cooling throughout. Three fans can be mounted at the bottom on a removable frame above the dust filter. The side of the case offers space for four 120mm or three 140mm fans on another removable frame. Three fans can be installed on the top, and the back even has space for two additional fans. There is also sufficient space for extensive water cooling. On the top and bottom as well as on the side, one 420mm radiator can fit simultaneously. You can alternatively install a 360mm radiator at the bottom or the top. Additionally, a heat exchanger up to 480mm in length can fit on the side. You can also install a 240mm or 280mm radiator at the back if you want to use a smaller AiO water cooling for your GPU. Ample space for your gaming hardware If you use a large motherboard to get the most out of your system, then the NV9 MK2 is also the right choice for you. For maximum compatibility, you can easily accommodate E-ATX motherboards. Additionally, graphics cards up to 490mm in length and 205mm in width can be installed. There is sufficient space for modern, wider GPUs and 12VHPWR cables in this big tower case. For additional stability, a GPU holder is also included. The PHANTEKS NV9 MK2 also supports CPU coolers up to 205mm in height. The case also provides space for up to three 3.5-inch and two 2.5-inch drives or six 2.5-inch drives, giving you ample storage options for any data. These can be installed on a hinged frame behind the motherboard tray and directly on the back of the motherboard tray. Robust construction and well-equipped I/O panel In addition to the Tempered Glass panels, the case impresses with its construction from robust steel. The frame is well hidden by screen prints on the panels. The seamless glass panels not only provide an elegant look but also an unobstructed view of the installed components. The I/O panel features a power button, HD audio and microphone jack, as well as a USB 3.1 Type-C port and two USB 3.0 Type-A ports for fast data transfer. Additionally, there are four buttons integrated into the case for controlling the D-RGB lighting - one button for each mode, colour, speed, and channel. Each channel has two connectors where the LED strips can be attached. The modular I/O panel at the bottom front can also be mounted at the back of the case. Intelligent cable management The PHANTEKS NV9 MK2 features a sophisticated cable management system that ensures a tidy and neat appearance. Particularly notable is the back, which also has a mesh cover and offers cable channels behind it, allowing you to hide cables from the motherboard panel as well. Through a cutout with a rubber grommet, you can even route cables through the bottom of the case. This way, your NV9 MK2 has a neat and appealing look from every angle. The case also supports motherboards with Back Connect. With back-connect design motherboards like MSI's Project Zero or ASUS's BTF motherboards, the connections for power supply, data cables, and other connections are located at the back of the motherboard. This not only provides cleaner cable management in your case but also better ventilation.Specification:ColourPrimary Colour: BlackDimensionsLength / Depth: 575 mmWidth: 280 mmHeight: 615 mmCaseCase Type: Full TowerMotherboard SupportCompatible Motherboard Formats: ATX, E-ATX, Micro-ATX, Mini-ITXMax. Motherboard Format: E-ATXInternal DimensionsMax. CPU Cooler Height: 205 mmMax. GPU Length: 490 mmMax. PSU Length / Depth: 210 mmPower SupplyPSU Format: ATXPower Supply Position: rear topFan Support120 mm fan: 12140 mm fan: 11Drive Bay2.5 inch internal drive bay: 63.5 inch internal drive bay: 3External PortsUSB 3.1 (extreme) Type C: 1USB 3.0 (extreme) Type A: 2Audio output & input: 1x output/input comb. (3.5 mm jack, 4-pin, TRRS)Case FeaturesI/O Position: FrontSide Panel: with windowFilters included: YesBook ConnectBook Connect: YesBook-Connect Compatibility: ASUS BTF, MSI Project ZeroExpansion SlotsExpansion slots / PCI slots: 8MaterialMaterial: Plastic, Steel, Tempered GlassLightingLighting: YesRGB Type: ARGB / DRGBLighting Colour: RGBAdditional ContentsIncluded Fan: None
Compact white mini-caseUp to five fans and breathable mesh ensure efficient airflowSupports motherboards up to Micro-ATXSpace for graphics cards up to 335 mm and CPU coolers up to 170 mm in heightConvenient carrying handle for transportThe Jonsbo C6 MAX: Portable mini-case with surprisingly ample spaceThe Jonsbo C6 MAX is a mini-case that provides enough space for high-end components despite its small size. Fans and breathable mesh on multiple sides ensure excellent airflow, efficiently cooling your hardware. Additionally, the tower is easy to transport with the practical carrying handle. If you have always wanted to take your gaming PC everywhere, the C6 MAX is worth a look!Efficient cooling with fans and radiatorsGood airflow is especially important in a small tower. Therefore, the C6 MAX can accommodate up to five fans. The top can hold either two 120 mm fans or one 140 mm fan, while the bottom can accommodate two additional 120 mm fans. The rear also supports a 120 mm fan. Together with the mesh on the top and front, this ensures that your hardware remains cool even in performance-intensive games.Space for your high-end hardwareThe mini-tower supports the installation of graphics cards up to 335 mm in size. Motherboards up to the Micro-ATX format are possible.The CPU cooler should not exceed a height of 170 mm, while the power supply can be up to 220 mm. A 2.5-inch or 3.5-inch drive can be installed for storing programs and games. Note that the fans on the bottom cannot be installed if you choose the 3.5-inch drive.
Showcase your hardware perfectly with the Phanteks Evolv S2 PC case. The spacious panoramic design with glass front and sides always gives you a clear view of your components—ideal for eye-catching builds with RGB lighting and custom water cooling. Black midi-tower with panoramic design Efficient cooling options with up to seven fans and radiator support up to 360 mm Supports motherboards up to E-ATX size with back-connect design Space for graphics cards up to 395 mm and CPU coolers up to 175 mm in height Clean look thanks to hidden cabling Four integrated RGB fans Phanteks Evolv S2: Midi-tower with panoramic design The Phanteks Evolv S2 midi-tower offers the perfect balance between size and functionality. With ample space for powerful hardware and efficient cooling, it’s the ideal choice for gaming and workstation builds. Optimal cooling with fans and radiators To keep your hardware cool under any load, the Phanteks Evolv S2 can accommodate up to seven fans. The top and bottom each support the installation of three 120 mm fans, while the rear can hold a 120 mm fan. To get you started, four 120 mm fans are already pre-installed—three at the bottom and one at the rear. If you prefer water cooling—whether AiO or custom—you can also install a radiator. The top supports a radiator up to 360 mm in size. Installing your hardware The case supports the installation of graphics cards up to 395 mm in length. Motherboards up to E-ATX format are supported. The new back-connect design motherboards are also compatible, allowing for clean cable management and an upgraded setup. The CPU cooler should not exceed 175 mm in height. Up to four drives can be installed to store your programs and games.
Small case for simple systems Two low-profile expansion slots for graphics cards Supports ITX-sized motherboards and CPU cooler height up to 38 mm Power supply: 1U Flex up to 150 mm One USB-C port on the I/O panel The Jonsbo NV10 in detail The Jonsbo NV10 is a small case that can be placed on a desk thanks to its lightweight design, and its simple black aesthetic fits into any setup. You can connect an external device to the USB-C port on the I/O panel. Hardware options The mini-tower supports installing ITX-sized motherboards. The CPU cooler should not exceed a height of 38 mm. The two low-profile expansion slots allow the installation of a low-profile graphics card up to 190 mm in length. When it comes to the power supply, only a 1U Flex power supply is supported, which should not be larger than 150 mm.
