XPG BATTLECRUISER II ST. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Frontventiler installeret: 3x 120 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 506 mm, Højde: 550 mm. Pakkebredde: 339 mm, Pakkedybde: 643 mm, Pakkehøjde: 615 mm
XPG BATTLECRUISER II ST. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Frontventiler installeret: 3x 120 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 506 mm, Højde: 550 mm. Pakkebredde: 339 mm, Pakkedybde: 643 mm, Pakkehøjde: 615 mm
The chassis stand for the Tower 600 Light-year Green includes a base cover for the case and a display stand. It allows users to set up their Tower 600 Light-year Green horizontally, making it easy to customize the case and create a unique experience. A dust filter is also attached to the base plate to provide protection against dust. The chassis stand comes with rubber pads to prevent scratching the chassis during installation. The abrasion-resistant material ensures long-lasting protection without affecting the finish of the tower. The small raised sections of the anti-slip design are strategically placed to provide secure grip and prevent unwanted slipping during use.
Small case for simple systems Two low-profile expansion slots for graphics cards Supports ITX-sized motherboards and CPU cooler height up to 38 mm Power supply: 1U Flex up to 150 mm One USB-C port on the I/O panel The Jonsbo NV10 in detail The Jonsbo NV10 is a small case that can be placed on a desk thanks to its lightweight design, and its simple black aesthetic fits into any setup. You can connect an external device to the USB-C port on the I/O panel. Hardware options The mini-tower supports installing ITX-sized motherboards. The CPU cooler should not exceed a height of 38 mm. The two low-profile expansion slots allow the installation of a low-profile graphics card up to 190 mm in length. When it comes to the power supply, only a 1U Flex power supply is supported, which should not be larger than 150 mm.
The LCD Panel Kit is an exclusive expansion accessory for the The Tower 200 Turquoise case. With its 3.9-inch LCD display, users can use the TT RGB Plus 2.0 software to gain full control over performance monitoring and customized effects. In addition, the LCD Panel Kit can be combined with other Thermaltake Ultra series products, providing an optimal visual LCD experience.
Antec P30 AIR. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Placering af strømforsyning: Bund. Frontventiler installeret: 2x 140 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 222 mm, Dybde: 478 mm, Højde: 465 mm
Darkflash DS900WD ATX computer case (black) + 4 fansDarkflash DS900WD is an enclosure designed for users who want practical solutions. The tempered glass side panel and wooden front panel provide good visibility of components and give the whole case a distinct look. It allows the installation of motherboards in ATX (Advanced Technology eXtended, a standard motherboard format), M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format) formats, giving you great flexibility when building your computer. With a spacious design and multiple mounting options, it provides convenience in assembling the kit and good air circulation. The kit comes with 4 fans.Various cooling optionsThe DS900WD offers space to install 12 120 mm fans or 2 140 mm fans and water cooling at the top 360 mm or 240 mm, and at the front 240 mm. This allows you to build an effective cooling system for powerful configurations. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation. As standard, the chassis is equipped with 4 fans to promote air circulation right from installation.Thoughtful layout and ample spaceThe chassis will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. There are seven PCI-E (Peripheral Component Interconnect Express, an interface for expansion cards) slots, allowing the kit to be expanded with additional expansion cards. For storage media, space is provided for two HDDs (Hard Disk Drive, hard drive) or one SSD (Solid State Drive, solid state drive) and one HDD, so you won't run out of space for games and files.Built-in portsThe Darkflash DS900WD chassis is equipped with a set of the most commonly used ports that make everyday use of the computer easier. On the top panel you'll find one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), while 2 additional USB 2.0 ports are ideal for connecting a mouse, keyboard, headphones or other accessories. There is also an HD Audio (High Definition Audio, a high-quality audio connector) for convenient connection of headphones and a microphone.Refined detailsOn the right side of the case is a metal mesh that not only provides adequate ventilation, but also blocks larger dust particles from entering the case. What's more, the top and bottom mesh panels also protect your equipment from debris, and their magnetic design makes them easy to install and remove.Durable construction and stylish designThe body of the case is made of 0.5 mm SPCC (Steel, Plate, Cold Rolled, Commercial Quality - structural steel), which ensures high durability. The whole thing measures 470 x 218 x 454 mm and fits into standard under-desk spaces. The stylish design and the ability to illuminate the fans make the set look modern.Includedcomputer casefan x4user manual ManufacturerDarkflashModelDS900WD ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installed4Type of fansINF24T ARGBButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight454 mmWidth218 mmDepth470 mm
Das UNC-409S-AIO 4U Rackmount-Gehäuse wurde für höchste Zuverlässigkeit und Leistung in anspruchsvollen Industrieumgebungen entwickelt. Gefertigt aus 1,2 mm starkem SGCC-Stahl, bietet es optimalen Schutz der Hardware und stellt eine langlebige, flexible Lösung für verschiedenste Konfigurationen dar. Für eine verbesserte Kühlleistung unterstützt das Gehäuse den Einbau einer 360 mm All-in-One (AIO) Wasserkühlung und ermöglicht so eine effiziente CPU-Wärmeabfuhr. Es ist mit verschiedenen Mainboard-Formfaktoren kompatibel, darunter SSI-EEB, und erlaubt somit leistungsstarke Systemkonfigurationen. Zur Stromversorgung kann wahlweise ein Standard-ATX-Netzteil oder ein Mini-Redundant-Netzteil eingesetzt werden, um auch bei kritischen Anwendungen eine stabile und redundante Stromversorgung sicherzustellen.
Das 4U-47045 ist ein vielseitiges 4U Servergehäuse mit vielen Erweiterungsmöglichkeiten und für den Einsatz in 19" Rack oder als Stand-Tower geeignet. Das Gehäuse ist standardmäßig für den Einbau von drei 5,25" Laufwerken, einem SLIM-DVD Laufwerk, vier 3,5" Laufwerken und zwei 2,5" Laufwerken konzipiert. Die Anzahl der Laufwerke lässt sich dabei durch den Einbau von optional erhältlichen Einbaukäfigen auf bis zu sechs 5,25" und zwei 2,5" Laufwerke oder acht 3,5" und zwei 2,5" Laufwerke erweitern. Für den nötigen Luftdurchsatz kann das Gehäuse hinten mit zwei 80mm Lüftern, im 3,5" Festplattenkäfig mit einem 80mm Lüfter und hinter der Fronttür mit einem 120mm Lüfter ausgestattet werden. Verstellbare Grafikkartenhalter sorgen für sicheren Halt der Grafikkarten oder anderer Erweiterungskarten. Die optional erhältlichen Teleskopschienen TS-680 ermöglichen den komfortablen Ein- und Ausbau in einem Serverschrank, sowie Arbeiten innerhalb des Gehäuses ohne dieses aus dem Schrank nehmen zu müssen. Des weiteren lässt sich das Gehäuse durch das ebenfalls optional erhältliche Erweiterungsset "SF-47045" auch als Stand-Gehäuse nutzen und mit Füßen und obenliegenden Transportgriffen versehen.
Das Thermaltake TR100 ist ein 18,4-Liter-SFF-Gehäuse (Small Form Factor), das mit vielen Details aufwartet. In der rechten Kammer befinden sich das Mini-ITX-Motherboard und das SFX-Netzteil, während die Grafikkarte in der linken Kammer untergebracht ist und über das beiliegende PCI-e 4.0 Riser-Kabel mit dem Motherboard verbunden ist. Über diesen wichtigen Komponenten befindet sich das Kühlsystem: Das TR100 ist in der Lage, einen 280 mm AIO zu beherbergen, um die Wärme von der CPU abzuführen. Alle Paneele sind gut belüftet und abnehmbar, um die Kühlleistung in einem kompakten Formfaktor zu bieten, und die Benutzererfahrung beim Aufbau eines PC-Systems mit TR100 zu vereinfachen. TR100 hat zwei separat erhältliche Zubehörteile: das 3,9“ LCD-Bildschirm-Kit das an der Vorderseite des TR100 installiert werden kann, und das TT Traveling Suite Case, das das System sicher schützt, wenn Sie unterwegs spielen wo auch immer Sie sind.
Das APNX V2 ist ein Premium-PC-Gehäuse, das für hervorragende Kühlung, elegante Ästhetik und Anpassungsfähigkeit entwickelt wurde. Seine drei abnehmbaren Hartglasplatten bieten einen rahmenlosen Panoramablick, während das X-Pand Flow Design die Gesamtluftströmungsdynamik erheblich verbessert. Mit Unterstützung für bis zu 10 Lüfter, 360-mm-Kühler und zwei 16-cm-Lüfter an der Unterseite sorgt es für eine erstklassige Wärmeleistung. V2 unterstützt gängige Mainboards mit Reverse-Anschluss für eine übersichtlichere Kabelverwaltung. Funktionen wie eine GPU-Halterung, eine abnehmbare Motherboard-Kabelabdeckung und ein austauschbares PSU/HDD-Fach verbessern die Haltbarkeit und Anpassungsmöglichkeiten. Mit vertikaler oder horizontaler 360-mm-AIO-Montage und Unterstützung für den APNX 10-Port-Lüfter-Hub bietet das APNX V2 effiziente Kühlung und mühelose Anpassungsmöglichkeiten für Hochleistungs-Builds.
Das RM53-502 unterstützt Mainboards mit einem Formfaktor bis zu SSI EEB und besitzt zudem insgesamt 8 PCI-Erweiterungssteckplätze, die problemlos bis zu 4 Grafikkarten in Servergüte aufnehmen. Die von der Vorderseite zugänglichen Anschlüsse für Erweiterungssteckkarten und das Design der E/A-Komponenten sind für diese Ausrichtungsweise mit untereinander austauschbaren Griffleisten und Einschubschienen ausgestattet. Im Inneren sind Optionen in vorder- und rückseitigen Konfigurationen für untereinander austauschbare Montagepositionen des 5,25-Zoll-Käfigs und des Netzteils vorhanden. Entsprechend der SilverStone-Designphilosophie für Gehäuseeinschübe ist das RM53-502 zur Verbesserung der Kühlleistung von Servergehäusen mit Flüssigkeitskühlern in Größen bis zu 360 mm kompatibel, die für eine effiziente Wärmeableitung und optimale Leistung sorgen.
Mit einem 270°-Panoramablick durch nahtlose Hartglasplatten an Vorder- und Seitenfläche präsentiert das Lucid 05 Ihre Komponenten eindrucksvoll aus nahezu jedem Blickwinkel. Der Lucid 05 verfügt über insgesamt 11 Lüfterhalterungen und sorgt so für eine effektive Luftzirkulation nicht nur für CPU und GPU, sondern auch für das System und die Speicherlaufwerke. Das obere Fach unterstützt einen 360-mm-Wasserkühlungsradiator für eine effiziente Wärmeableitung in Hochleistungssystemen. Mit der kürzlichen Einführung der RTX-50-Serie wurde das Lucid 05 so konzipiert, dass es Grafikkarten mit einer Länge von bis zu 410 mm unterstützt.
Clear lines, strong cooling, uncompromising look: With the Steel Shark, Sharkoon presents a stylish two-chamber ATX case that combines modern design with a particularly tidy look. Tempered glass on the front and side, four pre-installed ARGB PWM fans as well as extensive cooling options and BTF support make the Steel Shark the ideal basis for powerful and visually impressive gaming systems. Thanks to the well-thought-out two-chamber design, the Steel Shark clearly separates hardware and power supply including cable management. This creates an extra tidy look in the main area, while cables, drives and power supply can be discreetly stored at the back. The front and side panels of the Steel Shark are made of tempered glass and provide a clear view of the built-in hardware and the integrated lighting. This makes the case perfect for users who want to present their system not only powerfully, but also visually impressively. The Steel Shark is equipped with four 120 mm ARGB PWM fans ex works. These not only ensure an effective airflow, but also skillfully showcase the system visually. A practical ARGB control and a PWM fan hub with five positions are included! A total of up to eleven fans can be installed in the Steel Shark. In addition, the housing supports the simultaneous installation of two radiators and is therefore also aimed at water cooling enthusiasts who want to cool their system particularly efficiently and quietly. In addition to classic ATX motherboards, the Steel Shark also supports models with a BTF design. The rear connection technology further optimizes cable management and further underlines the clean look of the system. The Steel Shark is also flexible when it comes to selecting powerful hardware: It supports graphics cards with a length of up to 424 mm, CPU coolers with a height of up to 168 mm and power supplies with a length of up to 244 mm. Tower case type Color black EAN 4044951044924 Made in China Midi tower design Motherboard form factor ATX Tempered glass material Window Kit Yes Internal dimensions Plug-in card length maximum 424 mm Internal dimensions CPU cooler height maximum 168 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 244 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Front 3 x 120 mm ARGB-PWM fans pre-installed Back 1 x 120 mm ARGB-PWM fan pre-installed Notes Cable management system, graphics card holder, top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed Lighting Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Water cooling possible Supported radiators Front: 360 mm, Top: 360/280 mm Rear connection of the motherboard Yes Note If the graphics card is longer than 270 mm, there may be conflicts when installing a radiator in the side Accessories available accessory set Volume 59 l Dimensions Width: 28.5 cm x Height: 45.2 cm x Depth/Length: 46 cm
The Inter-Tech 4U-465M2 is a 4U rackmount server chassis for professional server, storage and virtualization applications. A special feature of the case is the ability to operate two independent Mini-ITX systems in a single 19-inch case. This makes it suitable, for example, for redundant servers, cluster solutions or energy-efficient dual server configurations. Each of the two systems has its own front connection, each with two USB 3.2 Gen1 ports and can be operated with a separate ATX power supply. A total of up to six internal 3.5-inch drive slots are available for data storage, making the case also suitable for NAS or backup servers. The cooling system consists of three centrally located 120 mm fans that ensure airflow throughout the entire case. In addition, each motherboard has two 40 mm fans on the back, so that both systems are cooled independently and reliably. CPU coolers can be up to 145 mm high. With its dimensions of 480 × 692 × 178 mm (W × D × H), the housing corresponds to the standardized 4U rack format and can be easily integrated into 19-inch server cabinets. The robust steel housing is designed for continuous 24/7 operation and weighs around 14.4 kg. The 4U-465M2 is aimed primarily at professional users who want to operate two compact servers in a common rack housing. In contrast to classic 4U cases for large ATX or E-ATX systems, the focus here is not on graphics cards or workstation hardware, but rather on high availability, efficient use of space and reliable continuous operation Type server case Color black EAN 4260455649964 Manufacturer no. 88887424 Rack design Mainboard form factor Mini-ITX Internal dimensions CPU cooler height maximum 145 mm Internal dimensions power supply form factor ATX Internal dimensions height units 4 U Drive bays 3.5 inches internal Front ports 4x USB-A 3.2 Gen 1 (5 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Notes Center: 3 x 120 mm fans pre-installed, motherboard back: 2 x 40 mm fans each pre-installed Rear connection of the mainboard No Feature support for 2x Mini-ITX motherboards, 2x ATX power supplies for independent power supply Further information Cage: 430 x 662 x 174mm (WxDxH) Accessories available screw assortment Volume 58 l Dimensions Width: 48 cm x Height: 17.4 cm x Depth/Length: 69.2 cm Weight 14.4kg
The Antec Flux Pro Noctua Edition is based on the Flux Pro from Antec and is equipped with the latest premium fans from Noctua to enable particularly quiet and powerful cooling, making it ideal for high-quality and low-noise systems. The optimized combination of housing and fans significantly improves the ratio of cooling performance to noise and can reduce noise by up to 8 dB(A), while the temperatures of the installed components remain at a comparable level. Modern NF-A14x25 G2 and NF-A12x25 G2 fans are used, which work significantly quieter with the same flow rate, with neighboring fans operating at slightly offset speeds in order to avoid annoying vibrations and uniform humming noises. For additional noise reduction, the fans can be mounted with anti-vibration brackets; alternatively, a classic screw connection is also possible. A pre-installed NA-FH1 fan hub allows central control of all fans via a single motherboard connector, while pre-routed cables simplify installation. In addition to the strong cooling performance, the housing impresses with its high-quality workmanship, a well-thought-out interior layout and a wide range of possible uses for air- and water-cooled systems. Subtle design accents in brown and integrated logo elements underline the collaboration with Noctua and make the case the ideal choice for powerful yet particularly quiet PC builds. Tower case type Color black/wood EAN 9010018900330 Manufacturer no. 84733080 Series Flux Pro Noctua Edition Big tower design Motherboard form factor E-ATX Material steel, plastic, wood, tempered glass Window Kit Yes Internal dimensions plug-in card length maximum 455 mm Internal dimensions CPU cooler height maximum 190 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 470 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 8 pieces Front connections 1x audio, 2x USB-C 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Front 3x NF-A14x25 G2 PWM installed, a total of 3 x 120 mm or 3x 140 mm fans can be installed 1x NF-A14x25 G2 PWM installed on the back, a total of 1x 120 mm or 1x 140 mm fan can be installed Notes dust filter below, above: 3x 120 mm or 3x 140 mm fan can be installed, 2x NF-A12x25 G2 PWM installed on the power supply cover, a total of 3x 120 mm can be installed on the power supply cover, below 2x 120 mm or 2x 140 mm Water cooling possible Yes Water cooling possible Supported radiators front: 120 / 140 / 240 / 280 / 360 / 420mm, top: 120 / 140 / 240 / 280 / 360 / 420mm, power supply cover: 120 / 240 / 360mm, bottom: 120 / 240mm, rear: 120 / 140mm Rear connection of the mainboard No Feature NA-FH1 fan hub Accessories available NA-FH1 fan hub, 4x NA-EC1 30cm extension cable, 2x NA-EC3 60cm extension cable, 2x NF-A14x25 G2 PWM PPA, 2x NF-A14x25 G2 PWM PPB, 1x NF-A12x25 G2 PWM PPA, 1x NF-A12x25 G2 PWM PPB, 36x NA-AV4 anti-vibration mounts, 36x NM-SFS1 fan screws, 1x NP-KC1 keychain Volume 71 l Dimensions Width: 24.5 cm x Height: 54.5 cm x Depth/Length: 53 cm Weight 13.8kg
Enables vertical GPU installation, including PCIe 5.0 riser cable, high-quality steel bracket, compatible with current Lian Li cases With the Lian Li Vertical GPU Mounting Kit, you can elegantly and securely mount your graphics card vertically inside your case. The set consists of a sturdy metal bracket and a high-quality PCIe riser cable. This way, your graphics card is perfectly showcased while remaining optimally ventilated. Vertical GPU Installation: For a tidy, stylish system High-Quality Materials: Robust steel bracket ensures stability Includes PCIe Riser Cable: Secure and stable signal transmission Easy Installation: Precisely fitted for Lian Li O11 Dynamic, O11D XL, and O11 Air Mini Optimised Cooling: More distance from the glass panel for better airflow Vertical Graphics Card Mounting for a Clean Look With this bracket, you position your graphics card vertically – perfect for visually enhancing your system. The elegant design ensures the GPU becomes the focal point of your setup while allowing better air circulation around the card. Precisely Fitted for Lian Li Cases The mounting kit is tailor-made for the Lian Li cases O11 Dynamic, O11D XL, and O11 Air Mini. It can be easily attached to the existing mounting points without the need for any additional modifications. Thanks to the sturdy steel construction, the bracket securely holds heavy high-end graphics cards in place. This keeps your hardware protected, even during transport or frequent upgrades. Includes PCIe Riser Cable The supplied PCIe 5.0 riser cable reliably connects your vertically mounted graphics card to the motherboard. Made from high-quality materials, it ensures stable signal transmission and is designed for current high-bandwidth GPUs. Quick and Easy Installation Tool-free bracket insertion Matching cutouts and screw holes Mounted in just a few minutes Installation is straightforward: insert the bracket, connect the riser cable, install the graphics card – done. This allows you to quickly redesign and visually enhance your system with minimal effort. The Lian Li Vertical GPU Mounting Kit is the ideal solution to make your system cleaner, safer, and more visually appealing. Whether you own an existing O11 case or are starting a new project – with this kit, you present your graphics card in the best light.
The Grandia GD10, along with GD09, is a culmination of SilverStone’s decade-long experience in HTPC case design and manufacturing into a product that every PC enthusiast can enjoy. The incredible efficiency in which it utilizes all available space results in a case that is close in size externally to Micro-ATX based GD04 and GD05, yet capable of fitting most important full size standard components including wider ATX motherboards (SSI-CEB) such as ROG or other gaming-centric models. All drive cages have been designed similarly to those from the popular ML03 case to provide maximum flexibility in drive configuration without the need for additional adapters. For cooling, all positive pressure and smooth airflow designs were retained from previous Grandia models while improvements were made to filter access for even easier maintenance. With the addition of a lockable front door, the GD10 offers an attractively sized case that is capable and user-friendly for those interested in building a system with extra security and application that exceeds typical PC or HTPC environments.- Lockable front door ensures security of system and drives- Positive air pressure design for excellent cooling/quietness and dust-prevention- Support expansion cards up to 12.2 inches- Support ATX motherboards- Quick access filters included- Incredible 362mm depth to fit comfortably inside home theater cabinet- Drive cages with multi-purpose mounts eliminate need for adaptersFormat ATX, SSI-CEBMaximum graphics card lenght 310 mmMaximum CPU-Cooler Height 138 mmSpecial Featuress two 120-mm-Fan auf der rechten Seite included (900 U/min, 18 dB(A)); ein 120-mm-Fan auf der linken Seite included (900 U/min, 18 dB(A)), compatible with 80-mm-FanPower Supply SlotDesign ATXDrive Baysexternal 5,25 inches 1internal 3,5 inches 22,5 inches 1FansIncluded 3x 120 mmInstallable 2x 80 mmFront-SidePorts USB 3.0 2Audio 2Back-SideSlots Full-Size 7additional Full-Size 1Product dimensions 442 x 171 x 362 mmWeight 4.8 kg
No. of drive bays: 6 Dimensions: 455 x 205 x 475 mm Weight: 5.27 Other features: - PSU mounting location: bottom of the housing- Power supply tunnel: YES- CPU cooling height: 163 mm- Maximum length of the graphics card: 395 mm- Side panel with a window: YES, made of tempered glass- Filter under the power supply: YES- Filter on the upper panel: YES- Filter on the front panel: YES- Steel thickness: 0.7 mm- Increased space for PSU: 240 mm- Rubber flanges for cable entry holes- All herrings twisted in place of the broken ones- The radiator can not be installed on the front panel
Edler Big-Tower von PHANTEKS, geschlossenes Seitenteil, optimiert für Luft- und Wasserkühlung, bis zu 503 mm lange Grafikkarten, für Dual-Systeme und Dual-PSU-Systeme geeignet
