Modular big tower with 3 configurations, side panels made of tempered glass, supports graphics cards up to 423 mm, suitable for two large radiators, exterior panels made of aluminum, up to nine fans, 1x USB-C and 2x USB 3.0.
CTE T500 TG ARGB Snow Full Tower Chassis The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support up to a 420mm AIO radiator at the front and a maximum 360mm AIO radiator at the rear. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE T500 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE T500 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. Experience the perfect combination of design and performance with our CTE T500 The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support a maximum of a 420mm AIO radiator at the front and a maximum of two 360mm AIO radiators at the front and rear. There's plenty of room to install cooling components, including front and rear fan brackets, top and right fan vents, bottom fan vent, and shroud vent, and the case can accommodate up to eleven 140mm/120mm fans. Other cool details include removable filters, pump and tank support, and Velcro straps for easy cable management. Our CTE T500 Snow is the perfect choice whether you're looking for a custom liquid cooling setup or a dual AIO setup! Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE T500 TG ARGB's versatile interior features two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Support for dual 360mm radiators Our CTE T500 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, allowing users to install up to two 360mm radiators simultaneously at the front and rear. To ensure AIO compatibility, users can install up to one 420mm AIO radiator on the front and up to two 360mm AIO radiator on the front and rear. All your dream cooling components will fit! The CTE T500 Full Tower case has a huge fan and cooler installation capacity: up to eleven 140 mm/120 mm fans and 360 mm AIO coolers in various locations (420 mm AIO cooler at the front). Moreover, equipped front and rear fan brackets and mounting locations on the top, right side and lid ensure easy installation of all desired cooling components. Rock your world with three pre-installed white 140mm CT140 ARGB fans The CTE T500 TG ARGB Snow Full Tower case is equipped with three white 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. We've tested everything, so you don't have to At Thermaltake, we always stress test our products under harsh conditions to ensure product quality. CTE T500 TG ARGB Snow Full Tower Chassis products have been tested at 100% full load for 30 minutes, with the highest-end CPU, GPU and motherboard at the time of testing, compared to a consumer-style configuration, which allowed us to test how the chassis handles in real-world situations.
Computer case Darkflash DS900 AIR (black) + 6 ARGB Fans Discover a new quality among computer cases with the Darkflash DS900 AIR model. The elegant black model is distinguished not only by its modern design, but also by advanced features that will meet the expectations of the most demanding users. With DS900 AIR your computer will become more efficient, stable and impressive. In the set you will find 6 DM12F 120 mm fans. Stability and design The unique design of the case with trapezoidal feet and shock-absorbing pads provides exceptional stability, eliminating vibrations. This is especially important for powerful computers that can generate vibrations during intensive work. Expandable The DS900 AIR is a model that provides users with ease of expansion. The spacious and easy-to-maintain interior gives you the freedom to expand. The chassis offers maximum compatibility with a flexible mount that accommodates up to 2 SSDs and 2 HDDs. This provides excellent options for configuring storage according to individual needs. Protection and cooling The DS900 Air allows you to build a powerful cooling system with the ability to mount multiple fans and heat sinks, ensuring optimal working conditions for all components. What's more, the back of the case is equipped with a protective steel mesh that allows for even more efficient ventilation. This is crucial for maintaining optimal temperatures and effective cooling especially during intensive work. Compatibility and additional slots The Darkflash DS900 AIR is compatible with ATX, M-ATX and ITX motherboards, providing a wide range of configuration options. It also features 7 additional slots, a maximum VGA length of 425 mm and a maximum CPU height of 170 mm. The power supply located at the bottom of the case allows for better organization and cable management. Included Housing DM12F 120 mm x 6 fan ManufacturerDarkflashModelDS900 AirColorBlackDimensions434 x 218 x 454 mmMaterial0.5 mm SPCCCompatible motherboardsATX/M-ATX/ITXHDD/SDD2/2Number of additional slots7Maximum VGA length425 mmMaximum CPU height170 mmPower supplyATX at the bottomHeatsink systemSide: 240 mm; Top: 240/360 mmFan systemSide: 120 mm x 2; Rear: 120 mm x 1; Top: 120 mm x3/140 mm x 2; PSU: 120 mm x 3;Front panelTempered glassLeft panelTempered glassI/OUSB 3.0 x 1/ USB 2.0 x 1/ LED/Power/Reset/HD Audio switch
The Jonsbo D31 MESH mATX case is a sleek and versatile option for building a powerful computer. Its front mesh design allows for optimal airflow and its tempered glass side panel adds a touch of elegance. The case can accommodate up to 8 fans and 3 radiators, and can fit GPUs up to 400mm in length. The versatile layout allows for a customizable and optimized use of space.
White midi-tower case, with side panel and front made of tempered glass, excellent airflow, space for radiators up to 360 mm, 3x 120-mm fans pre-installed, D-RGB lighting including controller, support for motherboards with rear connections.
The Antec FLUX White Midi Tower Case is a stylish and functional choice for your PC build. With a gross weight of 10.07 kg and dimensions of 31.2 cm in width and 57 cm in depth, this case provides ample space for your components. It supports a CPU cooler height of up to 180 mm and a maximum graphics card length of 408 mm, making it suitable for high-performance hardware. The sleek white design and ATX form factor ensure it fits seamlessly into any setup.
Elegantes und vielseitiges mATX-Gehäuse, geschlossene Front für Silent-Builds, Seitenteil aus Temperglas, bis zu 8 Lüfter und 3 Radiatoren möglich, für GPUs mit max. 400 mm Länge, versetzbares Netzteil für optimale Raumaufteilung
The DIGITUS wall-mounted data communications cabinet is equipped with a glazed door and a cable gland in the roof and floor. The steel structure is made of steel sheet up to 1.5 mm thick. It is possible to change the side of the door hinges and adjust the depth. The rack cabinets are delivered unassembled, in a flat package. Assembly is carried out in a few simple steps thanks to the enclosed "step-by-step" instructions. Installation cabinet supplied unassembled Quick installation Door opening angle: 200° 1-point locking on front door 483 mm (19") rack profiles mounted at the front inside the cabinet, galvanized 483 mm (19") rack profiles with depth adjustment 1.1-1.5 thick, high-strength sheet steel, powder-coated Cable inlet with brush strip in the roof and plastic cover in the floor Ventilation slots for active and passive air supply and exhaust Front door: glass, single Side panels: on two sides Assembled: no
Black midi-tower with wood decor, extravagant design with panoramic window, for motherboards up to ATX format, exceptionally good airflow, two different motherboard positions, 2x USB-A ports on the I/O panel, with wood front
INVADER X MINI MID-TOWER CHASSIS INVADER X MINI MINI CASE, MAX VIEW XPG INVADER X MINI, as the most compact PC case in the INVADER X family, offers the opportunity to build your own compact, sleek, and powerful gaming rig. Compatible with ATX motherboards and comes with 5 ARGB fans, INVADER X MINI offers impressive compatibility and captivating lighting displays with optimal airflow.
großer Midi-Tower, mit Tempered Glass an Seite, bis zu 11 Lüfter, Platz für Radiatoren bis 360 mm, Mainboards bis ATX, GPU bis 400 mm und CPU-Kühler bis 171 mm Höhe, bis zu sechs Laufwerke möglich
XPG BATTLECRUISER II ST. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Frontventiler installeret: 3x 120 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 506 mm, Højde: 550 mm. Pakkebredde: 339 mm, Pakkedybde: 643 mm, Pakkehøjde: 615 mm
Micro-ATX case for DIY NAS, one pre-installed fan, GPUs up to 230 mm / CPU up to 70 mm height, 6x 3.5 / 2x 2.5 inch drives possible, 1x USB-C / 1x USB-A
Obudowa do budowy wydajnych komputerów mid tower 5000T Przyciągnij uwagę za pomocą wyjątkowej profilowanej konstrukcji obudowy CORSAIR 5000T, w której możesz zbudować idealny system oparty na płycie głównej z odwróconymi złączami. Elegancka stalowa obudowa o wyjątkowym kształcie Działa z płytami głównymi z odwróconymi złączami Zdejmowane panele przedni i górny z siateczki umożliwiające intensywny obieg powietrza Mieści do 10 wentylatorów 120 mm lub 4 wentylatorów 140 mm oraz kilka radiatorów 360 mm Czyste płótno - brak fabrycznie zamontowanych wentylatorów i podświetlenia System organizacji okablowania RapidRoute EFEKTOWNE LINIEZrób piorunujące wrażenie za pomocą tej eleganckiej obudowy o wyjątkowym wyglądzie. Rozwiązania ułatwiające budowę komputera pozwalają wykorzystać cały potencjał, aby konstrukcja była tam samo imponująca wewnątrz, jak i na zewnątrz. OGROMNY POTENCJAŁ CHŁODZENIAPrzestronne wnętrze pomieści nawet 10 wentylatorów 120 mm albo 4 wentylatory 140 mm, a także kilka radiatorów o wysokości 60 mm, w tym z przodu lub boku - o rozmiarze 360 mm oraz w górnej części o rozmiarze 360 mm w konfiguracji push/pull. PEŁNA FUNKCJONALNOŚĆTa obudowa ma wszystko, czego potrzeba do budowy bardzo wydajnego komputera. ZDEJMOWANE PANELE PRZEDNI I GÓRNYSiateczkowe panele o wyjątkowej konstrukcji, które można łatwo zdjąć, aby dostać się do środka, umożliwiają intensywny przepływ powietrza. DWA OBSŁUGIWANE BEZNARZĘDZIOWO PANELE BOCZNE NA ZAWIASACHŁatwy dostęp do systemu dzięki panelom na zawiasach: jednemu ze szkła hartowanego, eksponującemu wszystkie komponenty, oraz jednemu ze stali z drugiej strony. SYSTEM PROWADZENIA PRZEWODÓW CORSAIR RAPIDROUTEUmożliwia szybkie i łatwe poprowadzenie przewodów przez obszerny 46-milimetrowy ukryty kanał pod płytą główną. OBSŁUGA PŁYT GŁÓWNYCH Z ODWROTNYMI ZŁĄCZAMISprawdzona pod kątem zgodności z płytami głównymi ASUS BTF, MSI Project Zero oraz Gigabyte Project Stealth, które mają złącza z tyłu, dzięki czemu nie psują widoku przez podłączone kable. PROSTA KONSTRUKCJANowoczesna konstrukcja w popularnym formacie obudowy komputerowej 5000T ma wygodne rozwiązania, które ułatwią Ci pracę. PUDEŁKO NA ŚRUBY WIELOKROTNEGO UŻYTKUDzięki dodanemu w zestawie pudełku, w którym wszystkie potrzebne Ci śruby będą bezpiecznie zamknięte, nie zgubisz już żadnej ważnej śrubki. PRZELOTKI FORMOWANE W DWÓCH CYKLACHDzięki miękkim, gumowym przelotkom wewnętrznym umożliwiającym łatwe przeciąganie kabli oraz twardym gumowym przelotkom zewnętrznym, które pewnie trzymają się na miejscu, możesz uniknąć frustracji podczas instalowania przewodów. ŚRUBY QUICKTURN DO WENTYLATORÓWŚruby do wentylatorów CORSAIR QuikTurn są równie wytrzymałe i bezpieczne jak tradycyjne śruby, dzięki czemu montaż wentylatorów w systemie staje się niezwykle prosty. Przydaje się to, gdy wypełniasz obudowę tej wielkości. WIELE MOŻLIWOŚCI CHŁODZENIAStwórz odpowiedni do swoich potrzeb system chłodzenia dzięki miejscu na 10 wentylatorów 120 mm oraz różnorodnym opcjom montażu dwóch radiatorów o maksymalnym rozmiarze 360 mm. NOWOCZESNY PANEL WEJŚĆ/WYJŚĆ Z PRZODUUmożliwia łatwy dostęp do nowoczesnych złączy, w tym do portu USB 3.2 Gen 2 Type-C, 4 portów USB 3.2 Gen 1 Type-A oraz zintegrowanego gniazda audio i mikrofonowego typu jack.
The GRAUGEAR Gaming Festplattenge is a versatile accessory designed for PlayStation 5 users. It features a USB-C connection for fast data transfer and charging capabilities. The highlight of this product is its Dual Charging Station, allowing users to charge two controllers simultaneously, ensuring you're always ready for your next gaming session. Crafted by Graugear, a brand known for its quality gaming accessories, this product is a must-have for serious PS5 gamers looking to enhance their gaming setup.
Stylish midi-tower with tempered glass on the side and front, wood embellishment on the front, supports up to nine fans, space for radiators up to 360 mm, motherboards up to Micro-ATX, GPU up to 410 mm, and CPU coolers up to 160 mm in height, dual-chamber design, supports up to three drives, includes three 120 mm fans
Zalman T4 PLUS White The Zalman T4 PLUS Black is a Micro-ATX case with a sophisticated design for efficient cooling and clever space utilization. With its sleek, matte black look, it fits perfectly into any setup—whether home office, gaming, or business PC. Highlights: Optimized air circulation: Pre-installed 120 mm fan at the rear and space for additional fans at the front, top and sides – for reliable cooling. Compact design: Supports Micro-ATX and Mini-ITX motherboards. Ideal for space-saving builds without compromise. Good expandability: space for graphics cards up to 300 mm long and CPU coolers up to 150 mm high. Front ports: 2x USB 2.0, 1x USB 3.0, HD audio – everything at your fingertips. Easy installation: Tool-free mounting for HDDs/SSDs, sophisticated cable management. Whether as an affordable entry-level model or for compact builds – the T4 PLUS offers reliable quality and functionality at a fair price from Aquatuning.
