Das Externes Gehäuse für 2.5" SATA HDD / SSD mit SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) aus Kunststoff dient dem Einbau einer 2.5″ SATA Festplatte oder SSD. Trotz der schlanken Bauform können Festplatten bis zu einer Höhe von 9,5 mm eingebaut werden. Über eine am Gehäuse verbaute USB Type-C Buchse wird das externe Gehäuse mit einem PC oder Notebook verbunden. Das beiliegende USB Type-C zu USB Typ-A Kabel ermöglicht den Anschluss an eine freie USB Typ-A Buchse. Selbstverständlich kann das Gehäuse auch via optionalem USB Type-C Kabel an eine freie USB Type-C Buchse oder einen freien Thunderbolt Port angeschlossen werden. Dank des VIA Chipsatzes unterstützt dieses Festplattengehäuse SuperSpeed USB mit bis zu 10 Gbps Übertragungsgeschwindigkeit. Somit kann die volle SATA 6 Gb/s Übertragungsrate der Festplatte ausgenutzt werden.
XPG BATTLECRUISER II ST. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Frontventiler installeret: 3x 120 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 506 mm, Højde: 550 mm. Pakkebredde: 339 mm, Pakkedybde: 643 mm, Pakkehøjde: 615 mm
The chassis stand for the Tower 600 Light-year Green includes a base cover for the case and a display stand. It allows users to set up their Tower 600 Light-year Green horizontally, making it easy to customize the case and create a unique experience. A dust filter is also attached to the base plate to provide protection against dust. The chassis stand comes with rubber pads to prevent scratching the chassis during installation. The abrasion-resistant material ensures long-lasting protection without affecting the finish of the tower. The small raised sections of the anti-slip design are strategically placed to provide secure grip and prevent unwanted slipping during use.
The LCD Panel Kit is an exclusive expansion accessory for the The Tower 200 Turquoise case. With its 3.9-inch LCD display, users can use the TT RGB Plus 2.0 software to gain full control over performance monitoring and customized effects. In addition, the LCD Panel Kit can be combined with other Thermaltake Ultra series products, providing an optimal visual LCD experience.
The Montech X5M is a mid-tower case that impresses with strong cooling performance and modern design. With a mesh front and pre-installed fans, it is aimed at gamers and PC builders who value airflow and a clean look. Large mesh front panel ensures optimal airflow. Four pre-installed 120 mm fans provide instant cooling performance. Tempered glass side panel offers a clear view of your hardware. Supports motherboards up to mATX and GPUs up to 405 mm in length. Clean cable management thanks to a spacious interior. Strong airflow for stable performance. The Montech X5M PC case is specifically designed for top-tier airflow, ensuring efficient cooling of your components. Thanks to the well-designed mesh panels and optimized airflow, your PC system stays cool and powerful even under heavy loads. With four pre-installed 120 mm fans, a solid cooling base is already provided, reliably protecting your components from overheating. The case is also equipped with high-quality dust filters, protecting your PC components from dirt and extending the lifespan of your system—for long-lasting, clean performance. Modern design with glass side panel. The case combines a clear mesh design with a side window made of tempered glass, allowing you to showcase your hardware while ensuring excellent cooling performance. The addressable RGB lighting of the X5M PC case perfectly highlights your setup. With customizable colors and effects, you can personalize your look and create a unique atmosphere—whether you prefer subtle accents or a spectacular light show. Plenty of space & easy installation. The Montech X5M midi-tower offers the perfect balance between size and functionality. With ample space for high-performance hardware and efficient cooling, it is the ideal choice for gaming builds. The interior of the Montech X5 Mesh provides space for micro-ATX motherboards, graphics cards up to 405 mm in length, and multiple storage drives. Thanks to thoughtful cable management and pre-installed fans, building your system is quick and straightforward.
Panoramic View with Seamless Tempered GlassFrameless front and side tempered glass panels showcase your unique PC build. Premium Tempered Glass PanelMade with 4mm thick tempered glass, the P40 NAMU offers outstanding durability. Vibrant AF120 Lighting Effect Minimizes blade vibration by preventing shaking during fan operation, enhancing durability. Reduces wind noise by suppressing the vortex effect on the fan blades. Maximizes airflow by minimizing air loss around the edge of the rotor. ARGB CONTROLLERThe RGB control hub and LED Control Button (Reset Button) on the side enable various RGB effects. Connect to your motherboard's 5V RGB pin header to create a wide range of RGB modes. Tool-Free Tempered GlassThe side panel can be easily and completely removed for convenient access to PC components. The groove fixing structure at the bottom of the tempered glass allows for easy panel management. Convenient MaintenanceEffortless side panel removal offers superior convenience during maintenance. Unrestricted Cooling PotentialDelivers ultimate cooling performance with a side intake design and optimized fan placement for superior internal airflow. Support for Reverse Layout MotherboardAll connectors are located on the underside of the motherboard for clean cable management and a minimalist build appearance.The P40 DS is perfect for hidden-connector PCs and makes cable management much easier. Efficient Cable Management with Optimal Routing Design34mm cable management space helps keep wires organized.The convenient cable management layout and space make it easier than ever to organize messy cables for a clean look. Top & Bottom Magnetic Dust FilterMagnetic dust filters on the top and bottom effectively minimize dust buildup while enabling rapid heat dissipation during operation.
Panoramic View with Seamless Tempered GlassTwo frameless front and side tempered glass panels showcase your unique PC build. Premium Tempered Glass PanelThe P40 NAMU uses 4mm thick tempered glass to provide exceptional durability. Vibrant AF120 Lighting Effect Blade vibration is minimized by preventing shaking during fan operation, enhancing durability. Wind noise is reduced by suppressing the vortex effect on the blades. Airflow is maximized by minimizing air loss around the outer edge of the rotor. ARGB CONTROLLERThe RGB control hub and LED Control Button (Reset Button) on the side offer a variety of RGB effects. Connect to the motherboard 5V RGB pin header to create multiple RGB modes. Tool-Free Tempered GlassThe side panel can be easily and fully removed for convenient access to PC components. Easy panel management is ensured thanks to the groove fixing structure at the bottom of the tempered glass. Convenient MaintenanceEffortless side panel removal offers superior convenience during maintenance. Unrestricted Cooling PotentialDelivers the ultimate cooling solution with a side intake design, combined with optimized fan placement for superior internal airflow. Support for Reverse Layout MotherboardAll connectors are located on the underside of the motherboard for clean cable management and a minimalist build appearance.P40 DS is perfect for hidden-connector PCs and makes cable management much easier. Efficient Cable Management with Optimal Routing Design34mm cable management space helps keep wires organized.A convenient cable management layout and space make it easier than ever to organize messy cables for a clean look. Top & Bottom Magnetic Dust FilterMagnetic dust filters on the top and bottom effectively minimize dust buildup while enabling rapid heat dissipation during operation.
White mini tower, supports motherboards up to Micro-ATX, accommodates 3x 2.5- or 3.5-inch drives, CPU cooler up to 145 mm in height, GPU up to 260 mm, 2x 120 mm fans pre-installed at the frontStylish mini case with three sides made of tempered glass Two 120 mm fans pre-installed at the front, with option for an additional fan up to 92 mm at the rear Supports Micro-ATX motherboards and CPU coolers up to 145 mm in height GPUs up to 260 mm in length Supports up to three 2.5- or 3.5-inch drives The Jonsbo V12 in Detail The Jonsbo V12 is a mini case that, despite its compact size, provides ample space for powerful hardware. Tempered glass on three sides gives you a perfect view of your installed components, and a stylish wooden front completes the overall aesthetic. Cooling The mini tower comes pre-installed with two 120 mm fans, ensuring efficient cooling. If needed, an additional fan up to 92 mm can be installed at the rear. Hardware Options The mini tower supports the installation of Micro-ATX size motherboards. The CPU cooler should not exceed 145 mm in height. The graphics card can be up to 260 mm long. For storage, up to three drives can be installed to accommodate programs and games.
Darkflash M305 fanless computer case (Black)Darkflash M305 is a meticulously designed Micro-ATX computer case that combines compact dimensions with functionality and futuristic design. It was created for users looking for good value for money, without compromising on airflow, hardware compatibility and aesthetics. A transparent side panel made of tempered glass allows you to effectively display your components, which is sure to be appreciated by fans of RGB backlighting (Red, Green, Blue, a backlighting system based on three colors: red, green and blue) or elegant kits. From now on, your gaming space will look classy and stylish!Practical solutions for everyday useThe case is equipped with a side panel made of tempered glass, fixed with convenient thumb screws. This gives you quick and easy access to the computer's interior, without the need to reach for tools. This solution works great for both hardware upgrades and regular cleaning of the cooling system. The front of the case has a modern, openwork panel with vents, which not only gives the whole case a dynamic character, but most importantly helps air circulation, protecting components from overheating.Efficient cooling systemDarkflash M305 offers a lot of freedom when planning cooling - you can fit as many as 7 120 mm fans inside. Such an arrangement allows you to build a very efficient air cooling system, which translates into stable operation of the processor, graphics card and other components, even during intensive gaming or work on graphics programs. The layout of the fans can be customized to ensure even airflow throughout the case.Compact format, big possibilitiesAlthough the case has small external dimensions (325 × 195 × 387 mm), its interior has been designed for maximum space utilization. It will easily accommodate a graphics card up to 300 mm in length and a CPU (Central Processing Unit, CPU) cooling system up to 160 mm in height. The case supports M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than the standard ATX) and ITX (Information Technology eXtended, an ultra-compact motherboard format) motherboards, allowing you to choose the right configuration for both an office and gaming PC.Thoughtful interior and space for dataInside you'll find a specially designed mounting bracket that allows you to install two SSDs (Solid State Drive, solid state drive) and two traditional HDDs (Hard Disk Drive, hard drive). This arrangement gives you a lot of flexibility in scheduling your operating system, games and data storage. The entire interior has been designed with order in mind - cables can be routed aesthetically, which promotes both appearance and better cooling.Quick access to portsOn the top edge of the case is an intuitive panel of inputs and outputs, including an advanced USB 3.0 connector (Universal Serial Bus, a connector standard for powering and charging electronic devices, as well as for data transfer). It allows fast file transfer and convenient charging of mobile devices. The top location of the ports makes it convenient to use them no matter where the computer stands - on or under the desk.Includedmotherboard screws x12hard drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelM305Housing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPSU standardM-ATX, bottom mountSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots4Max PSU length160 mmMax length of graphics card300 mmMax height of CPU cooler160 mmMax number of fans7Fan mounting optionsRear: 120 mm x1; Top: 120 mm x2; Front: 120 mm x2; Bottom: 120 mm x2Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.45 mm SPCCColorBlackHeight387 mmWidth195 mmDepth325 mm
Darkflash DS900WD ATX computer case (black) + 4 fansDarkflash DS900WD is an enclosure designed for users who want practical solutions. The tempered glass side panel and wooden front panel provide good visibility of components and give the whole case a distinct look. It allows the installation of motherboards in ATX (Advanced Technology eXtended, a standard motherboard format), M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format) formats, giving you great flexibility when building your computer. With a spacious design and multiple mounting options, it provides convenience in assembling the kit and good air circulation. The kit comes with 4 fans.Various cooling optionsThe DS900WD offers space to install 12 120 mm fans or 2 140 mm fans and water cooling at the top 360 mm or 240 mm, and at the front 240 mm. This allows you to build an effective cooling system for powerful configurations. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation. As standard, the chassis is equipped with 4 fans to promote air circulation right from installation.Thoughtful layout and ample spaceThe chassis will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. There are seven PCI-E (Peripheral Component Interconnect Express, an interface for expansion cards) slots, allowing the kit to be expanded with additional expansion cards. For storage media, space is provided for two HDDs (Hard Disk Drive, hard drive) or one SSD (Solid State Drive, solid state drive) and one HDD, so you won't run out of space for games and files.Built-in portsThe Darkflash DS900WD chassis is equipped with a set of the most commonly used ports that make everyday use of the computer easier. On the top panel you'll find one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), while 2 additional USB 2.0 ports are ideal for connecting a mouse, keyboard, headphones or other accessories. There is also an HD Audio (High Definition Audio, a high-quality audio connector) for convenient connection of headphones and a microphone.Refined detailsOn the right side of the case is a metal mesh that not only provides adequate ventilation, but also blocks larger dust particles from entering the case. What's more, the top and bottom mesh panels also protect your equipment from debris, and their magnetic design makes them easy to install and remove.Durable construction and stylish designThe body of the case is made of 0.5 mm SPCC (Steel, Plate, Cold Rolled, Commercial Quality - structural steel), which ensures high durability. The whole thing measures 470 x 218 x 454 mm and fits into standard under-desk spaces. The stylish design and the ability to illuminate the fans make the set look modern.Includedcomputer casefan x4user manual ManufacturerDarkflashModelDS900WD ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installed4Type of fansINF24T ARGBButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight454 mmWidth218 mmDepth470 mm
The LC Power 2004MB-V3 Tower Chassis is designed for users looking for a reliable and functional case that supports various components while maintaining efficient airflow. Crafted from both plastic and metal, this chassis provides durability and features a well-organized internal layout thanks to the integrated cable management system, making it easier to build and maintain a clean setup. With support for multiple motherboard formats including micro ATX and Mini-ITX, this chassis offers versatility for different builds.
Darkflash M305 Mesh fanless computer case (White)Darkflash M305 Mesh is a compact M-ATX case that combines futuristic design with practical solutions. It offers a mesh front for better airflow, a tempered glass panel for easy access and presentation of components, the ability to mount as many as 7 fans, support for high-performance graphics cards and CPU (Central Processing Unit, processor) cooling, and a functional I/O panel with a USB 3.0 port (Universal Serial Bus, an interface used for powering and charging devices, as well as for data transfer). Thanks to its well-thought-out design and ample interior space, this model will be perfect for both modern gaming setups and PCs for everyday use.Design and functionalityDarkflash M305 Mesh is an option for those who appreciate minimalist design, functionality and freedom in computer configuration. The front of the case has been made in an industrial style, with a full mesh panel, which first of all provides excellent airflow into the case, but also looks stylish. This solution is especially important for more demanding sets, where proper cooling directly affects the stability of hardware operation.Efficient ventilation and free coolingAlthough the M305 Mesh does not include pre-installed fans, its design has been prepared so that the user can independently select and install up to seven 120mm fans. Such flexibility gives you the opportunity to customize your cooling system - from a basic layout for an office PC to an elaborate gaming setup with advanced cooling. The mesh front not only improves air circulation, but also reduces heat buildup of components even under intense load.Tempered glass for more styleA screw-mounted tempered glass side panel allows you to quickly access the computer's interior without the need for tools. This is especially convenient for frequent kit modifications. At the same time, the transparent panel is great for backlit components, allowing you to expose the computer's interior and create an aesthetically pleasing whole.Compact size that does not limit the possibilitiesThe case supports M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than the standard ATX) and ITX (Information Technology eXtended, a very compact motherboard format) motherboards. Despite its small size (325 × 195 × 387 mm), its interior has been designed for maximum functionality. Inside there will be room for a CPU cooler up to 160 mm high and a graphics card up to 300 mm long. This allows it to accommodate most popular components without worrying about compatibility. The chassis also has room for two SSDs (Solid State Drive, a solid state drive) and two traditional HDDs (Hard Disk Drive, a classic hard drive), giving you plenty of room for storage expansion.Functional I/O panel and modern connectorsThe top of the chassis features a well-placed I/O panel with easy access to the most important ports. The presence of a USB 3.0 connector guarantees fast data transfer and convenient connection of external devices such as flash drives, portable drives or other accessories. The clear layout of the top panel simply makes it more convenient to use the computer on a daily basis.Includedmotherboard screws x12hard drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelM305 MeshHousing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPSU standardM-ATX, bottom of caseSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots4Max PSU length160 mmMax length of graphics card300 mmMax height of CPU cooler160 mmMax number of fans7Fan mounting optionsSide: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1; Top: 120 mm x2.Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.45 mm SPCCColorWhiteHeight387 mmWidth195 mmDepth325 mm
Das Inter-Tech ODS-716 für Raspberry Pi 4B ist komplett aus Aluminium gefertigt und bietet, zusammen mit den beiden integrierten Wärmeleitern für CPU und RAM ideale Wärmeleitfähigkeiten. Der Boden und Deckel des Gehäuses werden miteinander verschraubt, was zur Stabilität des gesamten Aufbaus beiträgt.
DarkFlash DS900G computer case (white)The DarkFlash DS900G is a mid-tower case that offers extensive functionality for demanding users. It supports ATX, Micro-ATX, and ITX motherboards, and its interior allows for the installation of graphics cards up to 425 mm in length and CPU coolers up to 170 mm in height. The interior space has been designed for easy access to components and convenient expansion. The DS900G also offers full support for various cooling systems, making it easy to handle demanding gaming or work setups.Full interior exposureThe curved side panel made of transparent tempered glass allows a full view of the components installed inside. The slightly rounded surface of the glass creates a panoramic effect that sets the case apart from standard models and allows the lighting and aesthetics of the assembly to be fully exposed.Effective coolingThe case has been designed for optimal air circulation. It allows for the installation of up to 10 120 mm fans or a combination of 2 140 mm fans on the top panel. The design provides for 3 fans at the top, 3 on the side, 1 at the rear, and 3 at the bottom, allowing for a highly efficient cooling system. Additionally, water cooling up to 360 mm in length can be installed on the top panel, and up to 240 mm in length on the side.Optimized airflow and noise reductionThe DS900G case has densely spaced ventilation holes that not only improve airflow but also effectively trap larger dust particles. The rear panel is equipped with a steel mesh that improves cooling efficiency by up to 15% while reducing noise levels by approximately 10%.Magnetic dust filtersMagnetically attached dust filters are located at the top and bottom of the case. This makes them easy to remove and clean without having to disassemble other components. This type of solution facilitates daily computer maintenance and helps to maintain optimal operating conditions for the components.Various expansion optionsThe interior of the case has been designed for users who want to maintain aesthetics and order while having space for all the necessary components. The DS900G offers 7 PCIe slots, giving you the freedom to install long graphics cards and additional expansion cards. The mounting space has been designed to ensure adequate airflow, space for cable management, and quick access to the most important components.Flexible drive mounting optionsThe DarkFlash DS900G allows you to install 2 3.5" HDDs and 2 2.5" SSDs. Depending on your needs, various configurations are possible, such as two HDDs and one SSD, or one HDD and two SSDs. This allows each user to tailor the storage layout to their preferences and the specifics of their setup.Convenient access to ports and buttonsThe case offers a practical set of ports and buttons on the front panel. The user has at their disposal one USB 3.0 connector and two USB 2.0 ports, as well as an HD Audio connector. The front panel also features Power and Reset buttons and a button to control the backlight. ManufacturerDarkFlashModelDS900GCase typeMiddle TowerSide panelTempered glassMotherboard standardATX, Micro-ATX, ITXPower supply standardATXInternal drive bays2 × 3.5" (HDD)2 × 2.5" (SSD)Expansion card slots7 PCIe slotsMaximum graphics card length425 mmMaximum CPU cooler height170 mmMaximum number of fansUp to 10 120 mm fansAdditionally: 2 140 mm fans (top)Fan mounting optionsTop: 3 × 120 mm or 2 × 140 mmSide: 3 × 120 mmRear: 1 × 120 mmBottom: 3 × 120 mmWater cooling mounting optionsTop: up to 360 mm or 240 mmSide: up to 240 mmNumber of fans installedNo fans installedButtons and controlsPower, ResetConnectors1 × USB 3.02 × USB 2.01 × HD AudioMaterialSPCC 0.5 mmColorWhiteHeight454 mmWidth218 mmDepth434 mm
The 4U-47045 is a versatile 4U server case with many expansion options and is suitable for use in a 19" rack or as a stand-alone tower. The case is designed as standard for the installation of three 5.25" drives, one SLIM DVD drive, four 3.5" drives, and two 2.5" drives. The number of drives can be expanded to up to six 5.25" and two 2.5" drives or eight 3.5" and two 2.5" drives by installing optional mounting cages. To ensure the necessary airflow, the case can be equipped with two 80mm fans at the rear, one 80mm fan in the 3.5" hard drive cage, and one 120mm fan behind the front door. Adjustable graphics card holders ensure that graphics cards or other expansion cards are held securely in place. The optionally available TS-680 telescopic rails allow for convenient installation and removal in a server cabinet, as well as working inside the case without having to remove it from the cabinet. Furthermore, the case can also be used as a stand-alone case with the optionally available "SF-47045" expansion kit, which adds feet and top-mounted transport handles. Type Rack, server case Color: black EAN 4260455649759 Manufacturer no. 88887418 Made in China Design Rack Mainboard form factor E-ATX Material Steel Internal dimensions Maximum plug-in card length 330 mm The designation USB 3.2 Gen 1 corresponds to the former designation USB 3.1 Gen 1 / USB 3.0. Drive bays 5.25 inch external 3 pieces Front connections 2x USB-A 3.2 Gen 1 (5 Gbit/s) Front 1 x 120 mm fan can be installed Rear 2 x 80 mm fans can be installed Notes Graphics card holder, installation space: 1 x Slim DVD, hard drive cage: 1 x 80 mm fan can be installed Rear connection of the motherboard No Further information Modular drive cage system Note Can be converted to a stand-alone case Accessories included Screw assortment Volume 41 l Dimensions Width: 48 cm x Height: 17.5 cm x Depth/Length: 48.5 cm Weight 8.7 kg
Das APNX V2 ist ein Premium-PC-Gehäuse, das für hervorragende Kühlung, elegante Ästhetik und Anpassungsfähigkeit entwickelt wurde. Seine drei abnehmbaren Hartglasplatten bieten einen rahmenlosen Panoramablick, während das X-Pand Flow Design die Gesamtluftströmungsdynamik erheblich verbessert. Mit Unterstützung für bis zu 10 Lüfter, 360-mm-Kühler und zwei 16-cm-Lüfter an der Unterseite sorgt es für eine erstklassige Wärmeleistung. V2 unterstützt gängige Mainboards mit Reverse-Anschluss für eine übersichtlichere Kabelverwaltung. Funktionen wie eine GPU-Halterung, eine abnehmbare Motherboard-Kabelabdeckung und ein austauschbares PSU/HDD-Fach verbessern die Haltbarkeit und Anpassungsmöglichkeiten. Mit vertikaler oder horizontaler 360-mm-AIO-Montage und Unterstützung für den APNX 10-Port-Lüfter-Hub bietet das APNX V2 effiziente Kühlung und mühelose Anpassungsmöglichkeiten für Hochleistungs-Builds.
The RM53-502 supports motherboards with a form factor up to SSI EEB and also has a total of 8 PCI expansion slots that can easily accommodate up to 4 server-grade graphics cards. The front-accessible connectors for expansion cards and the design of the I/O components are equipped with interchangeable pull handles and slide rails for this orientation. Inside, there are options in front and rear configurations for interchangeable mounting positions of the 5.25-inch cage and power supply. In line with SilverStone's design philosophy for chassis bays, the RM53-502 is compatible with liquid coolers up to 360 mm in size to improve the cooling performance of server chassis, ensuring efficient heat dissipation and optimal performance. Type Rack case Colour: black EAN 4710679819174 Manufacturer no. SST-RM53-502 Design Rack Mainboard form factor E-ATX, SSI-CEB, SSI-EEB Material Steel Internal dimensions Maximum plug-in card length 454 mm Supported radiators Front: 120/240/360 mm, rear: 120 mm Drive bays 5.25 inch external 2 pieces Slots Full-size 8 Front connections: 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 1 (5 Gbit/s) Front 2 x 80 mm fans included, one additional 80 mm fan can be installed, alternatively 3 x 120 mm fans can be installed Rear I/O: 1 x 140 mm fan included, alternatively 1 x 120 mm fan can be installed Notes Rear fan mount: 2 x 80 mm fans can be installed Water cooling possible Yes Rear connection of the motherboard No Features Removable front panel with security lock, supports two power supplies: PS2 (ATX) + SFX, mini-redundant or 2U CRPS redundant Further information Drive support: External 2 × 5.25" (compatible with 4 × 2.5" or 2 × 3.5"), Internal: 1 × 3.5" (compatible with 2 × 2.5"), 2 × 3.5" (compatible with 1 ×SFX PSU), 5 × 2.5" (two expansion cards occupy the 8th slot) Note For installing a cooler in dual CPU configurations, please refer to the detailed restrictions in the manual Accessories included Manual Volume 51 l Dimensions Width: 44 cm x Height: 22 cm x Depth/Length: 53 cm Weight 11.5 kg
With a 270° panoramic view through seamless tempered glass panels on the front and side surfaces, the Lucid 05 impressively presents your components from almost every angle. The Lucid 05 has a total of 11 fan mounts, ensuring effective air circulation not only for the CPU and GPU, but also for the system and storage drives. The top compartment supports a 360mm water cooling radiator for efficient heat dissipation in high performance systems. With the recent introduction of the RTX 50 series, the Lucid 05 has been designed to support graphics cards up to 410mm in length. Tower case type Color black EAN 4710679818986 Manufacturer no. SST-LD05-B-ARG Midi tower design Motherboard form factor ATX Material steel, plastic, tempered glass Window Kit Yes Internal dimensions plug-in card length CPU cooler height Power supply form factor Power supply length 3.5 inch drive bays 2.5 inches Slots full size Front connections 2x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Front 2 x 80 mm fans can be installed Rear 1 x 120mm ARGB fan pre-installed Notes Integrated 8+8 port ARGB/PWM hub, power supply cover cover: 3 x 120 mm fans can be installed, motherboard compartment: 2 x 120 mm ARGB reverse fans pre-installed, cover: 3 x 120 mm fans can be installed, alternatively 2 x 120 mm fans can be installed Water cooling possible Yes Supported radiators Rear connection of the mainboard No Note When installing two 2.5" SSDs in this position, ensure that the connectors face backwards to avoid interference.[When mounting a 360mm radiator in this position, ensure that the inlet and outlet pipes face forward to avoid interference.[When mounting a 240mm radiator in this position, the distance to the graphics card is 281mm (inclusive). power connectors). Make sure to install the fans between the radiator and the motherboard tray to accommodate this limitation. Volume 46 l Dimensions Width: 22 cm x Height: 49.15 cm x Depth/Length: 42.76 cm
Clear lines, strong cooling, uncompromising look: With the Steel Shark, Sharkoon presents a stylish two-chamber ATX case that combines modern design with a particularly tidy look. Tempered glass on the front and side, four pre-installed ARGB PWM fans as well as extensive cooling options and BTF support make the Steel Shark the ideal basis for powerful and visually impressive gaming systems. Thanks to the well-thought-out two-chamber design, the Steel Shark clearly separates hardware and power supply including cable management. This creates an extra tidy look in the main area, while cables, drives and power supply can be discreetly stored at the back. The front and side panels of the Steel Shark are made of tempered glass and provide a clear view of the built-in hardware and the integrated lighting. This makes the case perfect for users who want to present their system not only powerfully, but also visually impressively. The Steel Shark is equipped with four 120 mm ARGB PWM fans ex works. These not only ensure an effective airflow, but also skillfully showcase the system visually. A practical ARGB control and a PWM fan hub with five positions are included! A total of up to eleven fans can be installed in the Steel Shark. In addition, the housing supports the simultaneous installation of two radiators and is therefore also aimed at water cooling enthusiasts who want to cool their system particularly efficiently and quietly. In addition to classic ATX motherboards, the Steel Shark also supports models with a BTF design. The rear connection technology further optimizes cable management and further underlines the clean look of the system. The Steel Shark is also flexible when it comes to selecting powerful hardware: It supports graphics cards with a length of up to 424 mm, CPU coolers with a height of up to 168 mm and power supplies with a length of up to 244 mm. Tower case type Color black EAN 4044951044924 Made in China Midi tower design Motherboard form factor ATX Tempered glass material Window Kit Yes Internal dimensions Plug-in card length maximum 424 mm Internal dimensions CPU cooler height maximum 168 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 244 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Front 3 x 120 mm ARGB-PWM fans pre-installed Back 1 x 120 mm ARGB-PWM fan pre-installed Notes Cable management system, graphics card holder, top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed Lighting Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Water cooling possible Supported radiators Front: 360 mm, Top: 360/280 mm Rear connection of the motherboard Yes Note If the graphics card is longer than 270 mm, there may be conflicts when installing a radiator in the side Accessories available accessory set Volume 59 l Dimensions Width: 28.5 cm x Height: 45.2 cm x Depth/Length: 46 cm
The Grandia GD10, along with GD09, is a culmination of SilverStone’s decade-long experience in HTPC case design and manufacturing into a product that every PC enthusiast can enjoy. The incredible efficiency in which it utilizes all available space results in a case that is close in size externally to Micro-ATX based GD04 and GD05, yet capable of fitting most important full size standard components including wider ATX motherboards (SSI-CEB) such as ROG or other gaming-centric models. All drive cages have been designed similarly to those from the popular ML03 case to provide maximum flexibility in drive configuration without the need for additional adapters. For cooling, all positive pressure and smooth airflow designs were retained from previous Grandia models while improvements were made to filter access for even easier maintenance. With the addition of a lockable front door, the GD10 offers an attractively sized case that is capable and user-friendly for those interested in building a system with extra security and application that exceeds typical PC or HTPC environments.- Lockable front door ensures security of system and drives- Positive air pressure design for excellent cooling/quietness and dust-prevention- Support expansion cards up to 12.2 inches- Support ATX motherboards- Quick access filters included- Incredible 362mm depth to fit comfortably inside home theater cabinet- Drive cages with multi-purpose mounts eliminate need for adaptersFormat ATX, SSI-CEBMaximum graphics card lenght 310 mmMaximum CPU-Cooler Height 138 mmSpecial Featuress two 120-mm-Fan auf der rechten Seite included (900 U/min, 18 dB(A)); ein 120-mm-Fan auf der linken Seite included (900 U/min, 18 dB(A)), compatible with 80-mm-FanPower Supply SlotDesign ATXDrive Baysexternal 5,25 inches 1internal 3,5 inches 22,5 inches 1FansIncluded 3x 120 mmInstallable 2x 80 mmFront-SidePorts USB 3.0 2Audio 2Back-SideSlots Full-Size 7additional Full-Size 1Product dimensions 442 x 171 x 362 mmWeight 4.8 kg
No. of drive bays: 6 Dimensions: 455 x 205 x 475 mm Weight: 5.27 Other features: - PSU mounting location: bottom of the housing- Power supply tunnel: YES- CPU cooling height: 163 mm- Maximum length of the graphics card: 395 mm- Side panel with a window: YES, made of tempered glass- Filter under the power supply: YES- Filter on the upper panel: YES- Filter on the front panel: YES- Steel thickness: 0.7 mm- Increased space for PSU: 240 mm- Rubber flanges for cable entry holes- All herrings twisted in place of the broken ones- The radiator can not be installed on the front panel
