Tootja: AKYGA Tootegrupp: arvutikorpus arvutikorpuse tüüp: ATX Ümbrise tüüp (motherboard type): ATX, MicroATX, Flex ATX, MINI ITX Supported toiteploki standards: ATX external 3,5"sahtleid: 0 external 5,25"sahtleid: 1 external 5,25" väikseid sahtleid: 0 internal 2,5"sahtleid: 3 internal 3,5"sahtleid: 3 intenal 5,25"sahtleid: 1 paigaldatud toiteplokk(ies): Ei maksimum toiteplokke: 1 toiteploki võimsus: andmed puuduvad elektripesade pistikuid Serial ATA: andmed puuduvad ATX toiteploki ühenduspesa tüüp: andmed puuduvad +12V elektripesa tüüp: andmed puuduvad I/O Ühendusi: 1x stereo mini-jack (kõrvaklappide väljund), 1x stereo mini-jack (mikrofon input), 2x USB 3.0, 1x USB 2.0 ventilaatori kiiruse regulaator: Ei paigaldatud ventilaatoreid: 0 maksimaalne kogus of fans: 3 laius: 200 mm pikkus: 418 mm kõrgus: 412 mm pesade arv korpuses: 7 tk külje õhukanal: Jah tööriistavaba kokkupanek: Ei värv: must Lisaomadused: andmed puuduvad Lisainfo: Product Site
Experience the ATX case 7039B from LC-Power!7039B offers you a lot of features and a great variety of system configurations for ATX, Micro ATX and Mini ITX systems!
Aerocool Prime v2 on suure jõudlusega midi-tornkorpus, millel on julge RGB esipaneeli disain, mis tagab võimsa ja dünaamilise välimuse.; See on varustatud karastatud klaasist külgseinaga, et esitleda seadme sisemust.; Esipaneeli ...
Full mesh construction on the front ensures optimal ventilation The sense of unity between the front mesh and the tempered glass on the side panel creates a unique Zalman design. Exceptional airflow Designed for optimal air intake with a full mesh front panel and pre-installed addressable RGB fans allows for optimal and maximum airflow. High performance addressable RGB fan The mesh front panel and RGB fans provide optimal airflow and stunning RGB lighting effects (supports up to 8 fans). ARGB controller Press the LED I/O button to change the LED pattern and color (26 patterns) Press and hold the LED button for 3 seconds to sync the motherboard after the white light flashes once Press and hold the LED button for 6 seconds to turn off the LED after the white light flashes twice Press the LED button again to disconnect the motherboard sync and change the controller mode Magnetic dust filter Protects components and ensures unobstructed airflow by filtering dust. Bottom dust filter Protects the power supply from dust accumulation. Easy-to-use hinged glass side panel A hinged glass panel provides easy access to the interior.
Wall-mountable showcase case, ATX form factor, designed for custom water cooling, vertical GPU mounting, radiator up to 360 mm, graphics cards up to 400 mm in length.
Small case for simple systems Two low-profile expansion slots for graphics card Supports ITX-sized motherboards and CPU cooler height up to 38 mm Power supply: 1U Flex up to 150 mm One USB-C port on the I/O panel The Jonsbo NV10 in detail The Jonsbo NV10 is a small case that can be placed on your desk thanks to its light weight and fits into any setup with its simple black design. You can connect an external device to the USB-C port on the I/O panel. Hardware options The mini-tower supports the installation of ITX-sized motherboards. The CPU cooler should not exceed a height of 38 mm. In addition, the two low-profile expansion slots allow for the installation of a low-profile graphics card up to 190 mm. Please note that only a 1U Flex power supply unit no larger than 150 mm can be used.
Small case for simple systems Two low-profile expansion slots for graphics cards Supports ITX-sized motherboards and CPU cooler height up to 38 mm Power supply: 1U Flex up to 150 mm One USB-C port on the I/O panel The Jonsbo NV10 in detail The Jonsbo NV10 is a small case that can be placed on a desk thanks to its lightweight design, and its simple black aesthetic fits into any setup. You can connect an external device to the USB-C port on the I/O panel. Hardware options The mini-tower supports installing ITX-sized motherboards. The CPU cooler should not exceed a height of 38 mm. The two low-profile expansion slots allow the installation of a low-profile graphics card up to 190 mm in length. When it comes to the power supply, only a 1U Flex power supply is supported, which should not be larger than 150 mm.
The Montech X5M is a mid-tower case that impresses with strong cooling performance and modern design. Featuring a mesh front and pre-installed fans, it is aimed at gamers and PC builders who value airflow and a clean look. Large mesh front panel ensures optimal airflow Four pre-installed 120mm fans for immediate cooling performance Tempered glass side panel provides a clear view of your hardware Supports motherboards up to mATX and GPUs up to 405 mm in length Clean cable management thanks to a spacious interior Strong airflow for stable performance The Montech X5M PC case is specifically designed for superior airflow, ensuring efficient cooling of your components. Thanks to the well-engineered mesh panel and optimized airflow paths, your PC system stays cool and powerful even under heavy load. With four pre-installed 120mm fans, the case already provides a solid cooling foundation that reliably protects your components from overheating. High-quality dust filters are also included, shielding your PC components from dirt and extending the lifespan of your system—for consistently clean performance. Modern design with glass side panel The case combines a sleek mesh design with a tempered glass side window, allowing you to showcase your hardware while maintaining excellent cooling performance. The addressable RGB lighting of the X5M PC case perfectly highlights your setup. With customizable colors and effects, you can personalize your look and create a unique atmosphere—whether subtle accents or a spectacular light show. Spacious & easy installation The Montech X5M mid-tower offers the perfect balance between size and functionality. With plenty of space for high-performance hardware and efficient cooling, it is the ideal choice for gaming builds. The interior of the Montech X5 Mesh accommodates Micro-ATX motherboards, graphics cards up to 405 mm in length, and multiple storage devices. Thoughtful cable management and pre-mounted fans make assembly quick and uncomplicated.
