Cabinet Form Factor: Midi Torn Mainboard Form Factor1Supported Mainboard Form Factor: ATXMicro ATX 3.5-inch Internal Drivesahtleid12.5-inch Internal Drivesahtleid: 2 Expansion pesasi1(3.5-mm minijack x 2) Power seadme tüüp: toiteplokk Optional Power Device Location1Lisatarvikud: Screws Chassis Features1kg Pieces in pack: 1Box kaal Brutto (kg): 3.62 kg Retail Packaging Netokaal Carton1kg Packs in Box: 1EAN Code: 42604556436031
Kompaktes Mini-ITX-Gehäuse von Raijintek, aus eloxiertem Aluminium, Silber mit schwarzem Innenraum und Rückseite, Zwei Seitenteile aus Temperglas für tiefe Einblicke, für Mini-ITX-Mainboards und kleiner, 2x 2,5"- & 2x 2,5/3,5"-Slots, GPUs bis 28 cm & CPU-Kühler bis 13,5 cm
Internal 2x 2.5 "/3.5" (transverse, drive rails), 1x 2.5 "/3.5", 4x 2.5 ", Front I / O 2x USB-A 3.0, 1x microphone, 1x headphones, PCI slots 10 (3x riser card), Fan (front) 1x 140mm (RGB illuminated) or 3x 140mm (optional), Fan (rear) 1x 140mm (RGB illuminated), Fan (top) 2x 140mm (optional), Radiator sizes 120/240/280 / 360mm in front, 120 / 240mm above, 120mm in the back, Mainboard up to ATX (E-ATX with unknown dimensions possible), Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6") / E-ATX (unknown dimensions), Power supply ATX (max. 233mm deep), PSU position below, CPU cooler max. 180mm height, Graphics cards max. 387mm (without radiator), Color black, inside black, Lighting RGB header 3-pin ARGB (+ 5V / DATA / GND), integrated LED control, integrated RGB-LED lighting, illuminated fans, Dimensions (WxHxD) 230x502x491mm, Volume 56.69l, Enclosure type miditower, Special features Cable management, dust filter, graphics card holder, incl. Fan control, viewing window made of glass, Note Mainboard and case manufacturers refer to different dimensions as E-ATX. This manufacturer does not provide any information on supported E-ATX dimensions. Mainboards with E-ATX / SSI EEB dimensions of 305x330mm or 12 "x13" may not be supported, w/o psu, AEROPGSVISOR-G-BK-V1
The Thermaltake AH T600 is a helicopter styled open frame full tower case which comes with two 5mm tempered glass panels on left and right sides and can support motherboards up to E-ATX (up to 10.5'' wide).
The DistroCase™ 350P is a multi-functional and truly unique open frame mid tower chassis. The body of the case is constructed with its own water loop, a D5 pump, and 48 LEDs that are compatible with TT RGB PLUS, NeonMaker Light Editing, and Motherboard RGB Software. The DistroCase™ 350P Mid Tower Chassis is a fully modular chassis with a distro plate as the chassis' main body made with SPCC & PMMA. This multi-functional PC enclosure is incorporated with its own water channels, reservoir (about 800ml coolant), a preinstalled D5 pump, and multiple inlets and outlets. The 48 LEDs on the DistroCase™ 350P Mid Tower Chassis are TT RGB PLUS and NeonMaker Light Editing Software compatible. Other than that, users also have an option to control the lights by synchronizing the case with motherboards including ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. The DistroCase™ 350P Mid Tower Chassis provides users, gamers, and enthusiasts with an easier way to design their water loops for the ultimate user experience. 5mm Thick Tempered Glass Window with Stunning Viewing The DistroCase™ 350P features one 5mm thick tempered glass panel which is designed to meet the highest standards in the industry. The enlarged glass windows permit users to fully display every RGB component in the system, and show off their dedication and skill sets. Rotational PCI-E Slots Rotational PCI-E slots gives you the option to display your graphics card either vertically or horizontally, creating plenty of flexible space in your system. Thermaltake TT Premium PCI-E 3.0 Extender (Optional) – Supports a wide range of GPU solutions with ultra-excellent quality. Features like, extreme high-speed cable with highly-routable design, EMI shielding with conducting polymer are crafted for meeting the most demanding system. Available in 300mm, 600mm and 1000mm length. Expansion and Liquid-Cooling Solution The DistroCase™ 350P Mid Tower Chassis can support up to an ATX motherboard, a CPU cooler with a maximum height of 130mm, two-way VGA placement of up to 320mm (with reservoir & radiator installed), a power supply with a length of up to 200mm, and up to two 3.5” or six 2.5” HDDs. When it comes to the cooling solution, the water loop in this case is built differently from traditional PC cases. The DistroCase™ 350P Mid Tower Chassis is a fully modular designed chassis with a distro plate as the chassis' main body. This multi-functional PC enclosure is incorporated with its own water channels, reservoir, and multiple inlets and outlets. You can house up to a 280mm or 360mm radiator at the front and 360mm radiator on the side. DMD – Dismantlable Modular Design The DistroCase™ 350P enables user to freely build the system from the ground up with given modular panels, racks, brackets, and pre-design mounting arrays. No more unreachable screw corners or gaps and enjoys installation in a breeze with Dismantlable Modular Design. Technical Data Case Type: Mid Tower Dimension: 567 x 333 x 490mm (H x W x D) Net Weight: 17.78 kg / 39.2 lbs Side Panel: 1x 5mm Tempered Glass Color: Black Material: SPCC & PMMA Drive Bays: ACCESSIBLE: 2 x 2.5”,HIDDEN: 2 x 3.5" or 4 x 2.5" Expansion Slots: 6 Motherboards:: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) I/O Port: USB 3.0 x 2, USB 2.0 x 2, HD Audio x 1 PSU: Standard PS2 PSU (optional) Radiator Support Front: 1 x 360mm or 1 x 240mm or 1 x 120mm 1 x 280mm or 1 x 140mm Left Side: 1 x 360mm or 1 x 240mm or 1 x 120mm Clearance CPU cooler height limitation: 130mm VGA length limitation: 320mm (With Reservoir & Radiator) PSU length limitation: 200mm
Fractal Design Torrent - Torn - extended ATX Product Type: System cabinet Form Factor: Torn värv: must I/O Ühendusi: 1 x USB 3.1 Gen 2 2 x USB 3.0 X audio sisend X audio joon-out Supported Motherboards: ATX, microATX, Extended ATX, SSI CEB, SSI EEB, ITX System Cabinet Features: Front dust filter, bottom dust filter, toetab Kuni 420 mm radiator in front panel, PSU shroud, tool-less side panels (push-to-lock), light tint tempered glass left side panel, toetab Kuni 420 mm radiator in bottom panel Power Device: No toiteplokk Specification Compliance: ATX mõõtmed (WxDxH): 24.2 cm x 54.4 cm x 53 cm kaal: 11.1 kg
Optimized Airflow Design RGB Fusion with ARGB Connector Hub Support Motherboards up to E-ATX Up to 360mm Liquid Cooling Compatible Support Vertical GPU Installation Full-Size Tempered Glass Side Panel With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel Pre-installed 4 ARGB fans C301 GLASS WHITE CPU Height : 170mm GPU Length : 400mm PSU Length : 180mm, MidiTower PSU Not included, Front : 120mm x3 (ARGB); Rear : 120mm x1 (ARGB) Dimensions H=486 W=220 D=473 mm
Tootekood: Z10 DUO WHITEGTIN: 8809213766121Korpused
Zalman Z10 DUO MID ATX Case with Tempered Glass and Full Mesh Front Panel - White The Zalman Z10 DUO ATX-Midi case combines modern design, exceptional functionality, and outstanding cooling performance. With its elegant white finish, a panoramic tempered glass side panel, and a mix of full mesh and tempered glass on the front, the Z10 DUO provides the perfect foundation for premium builds and high-performance gaming systems. Pre-installed are four Infinity Mirror ARGB fans that deliver stunning lighting effects. The included ARGB controller with 6 ports allows for easy lighting control and customization of your setup. All air filters can be effortlessly removed for cleaning thanks to a convenient sliding mechanism or magnetic holders. Whether as the centerpiece of your gaming rig or as a stylish case for your custom system, the Zalman Z10 DUO leaves nothing to be desired. Key Features of the Zalman Z10 DUO Case: Panoramic Tempered Glass Side Panel: Showcase your hardware with a clear view of the internal components—perfect for RGB lighting and high-end builds. Full Mesh Front Panel: Maximizes airflow and enhances cooling performance, ideal for demanding applications. Front Tempered Glass: Behind the glass panel, the pre-installed Zalman Infinity Mirror ARGB fans shine brilliantly. Spacious ATX Format: Compatible with ATX, Micro-ATX, and Mini-ITX motherboards, offering space for extensive high-end components. Coolers up to 173mm: The Z10 DUO supports air coolers with a height of up to 17.3cm! Optimized Cooling: Three pre-installed Zalman 120mm Infinity Mirror ARGB fans in the front and one 120mm ARGB fan in the rear ensure efficient heat dissipation. Elegant White Design: Timeless and modern, it fits seamlessly into any environment while giving your system a professional appearance. Additional Advantages: Support for water cooling systems and large GPU installations. Clean cable management with intelligent routing options. Space for multiple drives and SSDs to optimize storage options. The Zalman Z10 DUO in white is the ideal choice for PC enthusiasts, gamers, and system builders who value aesthetics, functionality, and quality. With its thoughtful interior layout and optimized cooling, the Z10 DUO is the perfect foundation for your stylish PC build. Discover it now and lay the groundwork for your ultimate gaming setup!
Well-equipped Midi-Tower, front and side panels made of Tempered Glass, left side panel and top with ventilation slots, space for up to 9x 120mm or 6x 140mm fans, GPU length of up to 420 mm, ARGB strip on the front, up to two power supplies possible
The Jonsbo D41 Screen ATX case in black is a sleek and versatile option for building a computer. Its closed front design makes for a silent build and it features an integrated 8-inch display. The case is made with tempered glass and can accommodate up to 8 fans and 3 radiators. It can also fit GPUs up to 400mm in length and has a movable power supply for optimal space allocation.
Tootekood: P30 AIR BlackGTIN: 8809213766596Korpused
Zalman P30 Air micro-ATX case with tempered glass and mesh front - black The Zalman P30 Air micro-ATX case in black offers the perfect balance between design and functionality. With a mesh front for maximum air circulation and a tempered glass side panel, this case enables both excellent cooling and a stylish presentation of your hardware. Main features of the Zalman P30 Air case: Tempered glass side panel : Presents your components in an elegant frame and allows a fascinating view of the interior. Mesh front for optimal cooling : The air-permeable front maximizes ventilation and supports a cool system, even under high load. Compact micro-ATX size : Designed for micro-ATX and mini-ITX motherboards, ideal for space-saving, high-performance builds. Elegant black design : Fits into any environment and offers a modern, professional look. The Zalman P30 Air case in black is ideal for anyone looking for a powerful and well-cooled system in a compact and stylish case. The combination of mesh front and tempered glass makes it the perfect choice for demanding PC builds that are designed for aesthetics and performance.
Black E-ATX case for NAS, supports up to twelve 3.5-inch HDDs and four 2.5-inch SSDs, eight expansion slots, compatible with graphics cards up to 350 mm in length, CPU coolers up to 160 mm in height, front I/O with 1x USB Type-C, 1x USB Type-A, and a 3.5 mm jack
CG580 4F WH The CG580 4F WH is a picturesque single-chamber case crafted to elegantly display the most commonly used components. Equipped with 4 ARGB fans, support for 360mm radiators, and multiple fan configurations, it combines style with exceptional functionality. The design features a no A-pillar construction, along with glass side and front panels offering a 270°view, allowing builders to fully appreciate their hardware.
White case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Space for graphics cards up to 460 mm and CPUs with a height of up to 170 mm Installation of up to nine SSDs provides extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that impresses not only with its variety of hardware possibilities but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to earn true admiration. With the LUCA L70, you are perfectly equipped to build your gaming PC exactly the way you want. This midi-tower not only offers you more than enough space to cool your hardware, but it can also be easily disassembled and reassembled. Building your high-end system has never been so easy! Comprehensive cooling options for your new build When you assemble your own PC, cooling is one of the most important points to consider. The LUCA L70 allows you to install up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that in this configuration, the power supply must be mounted on the top of the case. If you prefer to mount the PSU at the bottom, three fans can be installed on the top, and only one on the bottom. Water cooling enthusiasts won't be disappointed either: radiators up to 420 mm can be installed in several places. If the PSU is mounted on the top, you can fit a radiator up to 240 mm there and up to 360 mm at the bottom. If the PSU is mounted at the bottom, there is room for a 420 mm radiator on both the top and the side. To prevent dust from accumulating unnecessarily inside the case, there are dust filters on the top and the bottom. This ensures significantly longer hardware lifespan and saves you time and annoying cleaning. Thanks to the numerous options for installing fans and radiators, efficient cooling is guaranteed, ensuring your high-end hardware always operates at peak performance. Additionally, the tower stands 4 mm off the ground on X-shaped legs, further improving airflow. Case for powerful hardware To ensure even the most demanding games run smoothly on high settings, the LUCA L70 supports powerful graphics cards up to 460 mm in length. An included GPU bracket ensures the card doesn't suffer due to gravity. Vertical installation of the graphics card is also possible, but the necessary accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX and up to 280 mm wide. To avoid messy cabling, motherboards with rear connectors are also supported when the PSU is in the top position, but only in ATX or Micro-ATX format. The CPU height should not exceed 170 mm, while the power supply should be a maximum of 190 mm long. To ensure enough storage for your programs and games, up to nine 2.5-inch drives can be mounted on the side in the LUCA L70. Toolless assembly and disassembly To make installing and swapping your hardware as easy as possible, the LUCA L70 is designed to be completely modular. The front, side, and other parts can be removed and reassembled without additional tools. The motherboard tray can also be repositioned, allowing you to install the motherboard, CPU, and CPU cooler independently of each other.
