Small case for simple systems Two fans installed Supports ITX size motherboards and CPU cooler height up to 38 mm Up to four 2.5-inch SSDs possible Power supply: 1U Flex up to 150 mm The Jonsbo N10 in detail The Jonsbo N10 is a small case that can be placed on the desk due to its light weight and fits into any setup thanks to its simple silver design. Cooling The mini-tower already comes with two small fans installed, providing sufficient cooling. Additional fans cannot be installed. For this reason, the tower does not support the installation of graphics cards, as these require more cooling. Nevertheless, a processor with integrated graphics can be installed without any problems. Hardware options The mini-tower supports the installation of ITX size motherboards. The CPU cooler should not exceed a height of 38 mm. To store programs and games, up to four 2.5-inch SSDs can be installed. For the power supply, note that only a 1U Flex power supply is possible, which should not exceed 150 mm in length.
Small case for simple systems Two fans installed Supports ITX-size motherboards and CPU cooler height up to 38 mm Up to four 2.5-inch SSDs possible Power supply: 1U Flex up to 150 mm The Jonsbo N10 in detail The Jonsbo N10 is a small case that can be placed on a desk thanks to its low weight and fits into any setup with its silver, minimalist design. Cooling The mini-tower already has two small fans installed, providing sufficient cooling. Additional fans are not possible. For this reason, the tower does not support the installation of graphics cards, as they require more cooling. However, a processor with integrated graphics can be installed without any problems. Hardware options The mini-tower supports the installation of ITX-size motherboards. The CPU cooler should not exceed a height of 38 mm. For saving programs and games, up to four 2.5-inch SSDs can be installed. For the power supply, make sure only a 1U Flex unit is possible, and it should not be larger than 150 mm.
O11 VISION COMPACT Two top panel options: mesh or tempered glass Vision mode with tempered glass for an uninterrupted view of components Mesh mode with fan bracket for additional radiator or fan support Supports up to 11 fans and a maximum of 360mm large radiator Compatible with back-connect ATX motherboards Hidden AIO tube design for a streamlined appearance Dual-chamber layout with cable management compartment and cable holders
Conceptronic DONN19G. Ühenduvustehnoloogia: Juhtmega ühendatud, Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C, USB Power Delivery kuni: 100 W. Toote värv: Hall, Ühilduvad mälukaardid: MicroSD (TransFlash), SD, Andmeedastuskiirus: ...
XG172 | MidiTower | PSU Not included | Cooling Fan Support (mm): Side:2x 120mm Top:3x120mm / 2x140mm Rear:1 x 120mm Bottom: up to 3 x 120mm | Dimensions 421 x 220 x 490mm
With the Lian Li O11 Dynamic Mini V2, you can make your gaming setup stand out: Despite its compact design, this mini case offers a spacious interior with enough room to bring your vision to life. Whether you prefer air cooling, water cooling with an AiO, or vertical installation of your graphics card—this case allows all that and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior enables the installation of powerful components Clean cable management: Cable brackets and support for motherboards with back-connect design keep cables neat Includes GPU brackets: Graphics card can be installed vertically or horizontally Protection from dust: Easy-to-clean dust filters at multiple spots The Lian Li O11 Dynamic Mini V2: A mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 with example hardware Equipped with tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 lets you showcase your hardware. Thanks to its compact size, it can be easily placed on your desk, becoming the centerpiece of your gaming setup—all without messy cables inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable brackets, the case allows for neat routing of your cables. A built-in bracket for the heavy 24-pin ATX cable keeps it neatly in place, while cleverly positioned straps keep all other cables together. You can even use the drive cages to hide your cables. Managing cables is easy—whether you’re building your first gaming PC as a beginner or you’re a pro who’s tired of endless cable routing. Flexible installation for motherboards and AiO water coolers With a vertically adjustable motherboard standoff, you have more flexibility when installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The upper position supports 240 mm and 360 mm AiO water coolers, while the lower position also allows for a 280 mm radiator. Well cooled, even under full load Supports up to nine fans Room for two water cooling radiators Mesh panel on top Dust filter at the bottom The fans and radiators ensure sufficient cooling for your gaming hardware, even at full load. A mesh panel and a dust filter help prevent dust buildup inside your case, thus prolonging the lifespan of your hardware. Ready for top performance with space for large GPUs The case interior is designed so that even large graphics cards up to 400 mm fit in easily—whether installed horizontally or vertically. Included GPU brackets ensure secure mounting in both scenarios. This lets you choose how to install your graphics card. Supports Mini-ITX, mATX, and ATX motherboards—including models with back-connect cable management. Combined with clever cable brackets and Velcro straps, this ensures a tidy, clean look: All connections disappear elegantly behind your motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O Panel The I/O panel module can be attached either on top or at the front bottom. This means you can position the case however you like and still easily access the button and ports. If you place the panel on top, the bottom cover can also be removed, improving airflow.
The Lian Li DAN Cases A3-mATX Wood Edition in black combines modern design with an elegant walnut wood front panel. Thanks to excellent airflow through mesh panels, flexible configuration options, and space for high-end hardware, this case is the ideal choice for those seeking performance and style in a compact format. Perfect for demanding builds with a personal touch! Micro-ATX case by Lian Li in collaboration with DAN Cases Elegant front cover made from premium walnut wood and side panel of tempered glass Mesh panel on the top for excellent airflow Flexibly customizable: Let your imagination run wild Outstanding cooling thanks to space for 360 mm radiators Suitable for motherboards in Micro-ATX or Mini-ITX form factors Supports various power supplies from SFX to ATX A touch of luxury: The Lian Li DAN Cases A3-mATX Wood Edition in black If you're looking for a small form factor case for high-performance PC hardware, you should take a closer look at the Lian Li DAN Cases A3-mATX Wood Edition. This case combines a minimalist design with premium features: the elegant walnut wood front gives your setup an exclusive touch. With a capacity of about 26 liters, this Micro-ATX case is compact and space-saving. At the same time, the A3-mATX Wood Edition is perfect for high-end PC components, offering effective cooling despite its small size. With plenty of room for fans and radiators and generous ventilation openings, this mini tower easily meets the demands of powerful hardware. Flexibility meets performance: The fan and cooling options of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX Wood Edition offers space for up to 10 fans in the 120 mm format. These can be distributed as follows: three on the top, three on the side, three on the bottom, and one on the rear. Alternatively, two 140 mm fans can be mounted on both the top and side. With 25 mm thick fans on the case bottom, the GPU’s height is limited to 61 mm (3 slots). CPU air coolers can be up to 165 mm tall. Lian Li and Daniel Hansen also considered water cooling when developing the A3-mATX: A radiator can be installed in three locations inside the case: either a 360 mm (triple radiator) or 280 mm (dual radiator) on the top or the side. You must choose one of these two positions. The bottom of the case accommodates an additional 240 mm radiator. If you mount the fans below the radiator, you can even install a 360 mm radiator. Customizable configuration: The versatile possibilities of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX is suitable for a motherboard in Micro-ATX or Mini-ITX form factor. Unlike a Mini-ITX case, the PC case offers four expansion slots, allowing you to install a graphics card up to 4 slots tall and up to 415 mm long. You can install two 2.5-inch SSDs on a bracket. You can also install a 3.5-inch HDD or another 2.5-inch drive at the bottom of the case. You have the choice between an ATX, SFX-L, or SFX power supply, which you can mount flexibly at the front or side to create more space for your graphics card or the radiator—just as you prefer. In general, the smaller the power supply in the A3-mATX, the more room you have for the rest of your hardware. The I/O panel on the front of the Lian Li DAN Cases A3-mATX Wood Edition features two USB 3.0 Type A ports, one USB 3.1 Type C port, two 3.5 mm audio jacks (Mic-In/Audio-Out), and a power button. Note: The Lian Li DAN Cases A3-mATX Wood Edition offers numerous configuration options, but space inside this case is limited. The size and position of the power supply are crucial in selecting the right PC components. Therefore, we recommend careful planning using the manual in advance.
The IT-5905 is a modern Midi-Tower with a robust and compact design. It knows to convince due to its user-friendly assembly of front connectors in the upper part of the front panel.Besides the design, the IT-5905 convinces with space for up to four optional coolers, several mounting options for 3.5" and 2.5" HDD´s and space for graphics cards with a length of 32cm.Two USB 3.0 front connectors and a depot in the cap (for USB-sticks for example) complete the offer and make this case a real all-rounder.KujutegurMiditornTüüpPC5,25" lahtrite arv33,5" lahtrite arv4Emaplaadi toetatud kujuteguridATX,Micro-ATXToote värvMustAknagaJah2,5" salvede arv2Sisemiste 3,5" salvede arv3Väliste 5,25" kettalahtrite arv3SobilikKodu/kontorGraafikakaardi maksimaalne pikkus32 cmKaasas toiteplokkEiUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahMaksimaalne esiventilaatorite arv1Toetatud esiventilaatorite läbimõõt120 mmMaksimaalne küljeventilaatorite arv2Toetatud küljeventilaatorite läbimõõt120 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt80,120 mmToetatud kõvakettasuurused2.5,3.5"JuhtmehaldusJahLähtestusnuppJahLaius200 mmSügavus415 mmKõrgus410 mm
Classic 19" Rack with a lot of space for different drivesYou can remove the HDD cages with a few steps for easy mounting of internal devices.5 mounting slots with full height and the possibility to mount an ATX PSU ensures a professional and cost efficient solution.The lockable doors in front of the slots prevent, unauthorized access.Integrated air filters ensure clean air and a flawless cooling.KujutegurPüstikTüüpServerMaterjalTeras5,25" lahtrite arv43,5" lahtrite arv5Emaplaadi toetatud kujuteguridATX,Micro-ATX,uATX,Mini-ITXToote värvMustAknagaEi2,5" salvede arv2Sisemiste 3,5" salvede arv5Väliste 5,25" kettalahtrite arv4Püstikmontaaž3UMaterjali paksus1,2 mmSertifikaatRoHS, CEKaasas toiteplokkEiUSB 2.0 portide arv2AudiosisendEiAudioväljundEiInstallitud tagaventilaatorid2x 80 mmMaksimaalne tagaventilaatorite arv2Toetatud tagaventilaatorite läbimõõt80 mmToetatud kõvakettasuurused2.5,3.5"LED-indikaatoridVõimsus, HDDLähtestusnuppJahLaius485 mmSügavus530 mmKõrgus133 mmKaal9,34 kgPakendi laius560 mmPakendi sügavus630 mmPakendi kõrgus225 mmPakendi kaal11,1 kg
Cabinet Form Factor: Midi Torn Mainboard Form Factor1Supported Mainboard Form Factor: ATXMicro ATX 3.5-inch Internal Drivesahtleid12.5-inch Internal Drivesahtleid: 2 Expansion pesasi1(3.5-mm minijack x 2) Power seadme tüüp: toiteplokk Optional Power Device Location1Lisatarvikud: Screws Chassis Features1kg Pack kaal Netto (kg): 2.8 kg Pieces in pack1Box kaal Brutto (kg): 3.61kg Retail Packaging Netokaal Carton: 0.5 kg Retail Packaging Netokaal plastik1kg Packs in Box: 1EAN Code: 42604556435971
Riesiger Dual-Chamber Big-Tower, Seitenteil und Front aus Tempered Glass, Grafikkarten bis 446 mm, 3x 360-mm-Radiatoren gleichzeitig möglich, Deckel und Seitenwand aus Aluminium, bis zu 10x 120-mm-Lüfter, 1x USB Typ C und 4x USB 3.0 im Frontpanel
Edler Big-Tower von PHANTEKS, Seitenteil aus Tempered Glass, optimiert für Luft- und Wasserkühlung, bis zu 503 mm lange Grafikkarten, adressierbare RGB-LED-Beleuchtung, für Dual-Systeme und Dual-PSU-Systeme geeignet
DIMENSIONS : (D)420mm X (W)269.5mm X (H)380mm MOTHERBOARD : E-ATX (Max 280 mm wide)/ATX/ Micro-ATX/ Mini-ITX PSU : SFX/ SFX-L MATERIAL : Steel 4 mm Tempered Glass 2mm Aluminum (top and left panel) FAN SUPPORT : Top: 3x 120mm or 2x 140mm Side: 2x 120mm or 2x 140mm Bottom: 3x 120mm or 2x 140mm Rear: 1x 120mm RADIATOR SUPPORT : Top: 360mm or 280mm or 240mm radiator Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator GPU LENGTH CLEARANCE : 395mm CPU COOLER HEIGHT CLEARANCE : 170mm VGA Length : 370mm DRIVES : Right side 2 x 2.5″ SSD + back plate 2 x 3.5″ HDD (or SSD) EXPANSION SLOTS : 3 or 5 or 7 slots (depends on back panel) IO PORTS : 2 x USB 3.0, 1 x USB 3.1 TYPE-C, 1 x HD Audio, Power Button DUST FILTERS : 1 x Top, 1 x Bottom, 2 x Side
The DistroCase™ 350P is a multi-functional and truly unique open frame mid tower chassis. The body of the case is constructed with its own water loop, a D5 pump, and 48 LEDs that are compatible with TT RGB PLUS, NeonMaker Light Editing, and Motherboard RGB Software. The DistroCase™ 350P Mid Tower Chassis is a fully modular chassis with a distro plate as the chassis' main body made with SPCC & PMMA. This multi-functional PC enclosure is incorporated with its own water channels, reservoir (about 800ml coolant), a preinstalled D5 pump, and multiple inlets and outlets. The 48 LEDs on the DistroCase™ 350P Mid Tower Chassis are TT RGB PLUS and NeonMaker Light Editing Software compatible. Other than that, users also have an option to control the lights by synchronizing the case with motherboards including ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. The DistroCase™ 350P Mid Tower Chassis provides users, gamers, and enthusiasts with an easier way to design their water loops for the ultimate user experience. 5mm Thick Tempered Glass Window with Stunning Viewing The DistroCase™ 350P features one 5mm thick tempered glass panel which is designed to meet the highest standards in the industry. The enlarged glass windows permit users to fully display every RGB component in the system, and show off their dedication and skill sets. Rotational PCI-E Slots Rotational PCI-E slots gives you the option to display your graphics card either vertically or horizontally, creating plenty of flexible space in your system. Thermaltake TT Premium PCI-E 3.0 Extender (Optional) – Supports a wide range of GPU solutions with ultra-excellent quality. Features like, extreme high-speed cable with highly-routable design, EMI shielding with conducting polymer are crafted for meeting the most demanding system. Available in 300mm, 600mm and 1000mm length. Expansion and Liquid-Cooling Solution The DistroCase™ 350P Mid Tower Chassis can support up to an ATX motherboard, a CPU cooler with a maximum height of 130mm, two-way VGA placement of up to 320mm (with reservoir & radiator installed), a power supply with a length of up to 200mm, and up to two 3.5” or six 2.5” HDDs. When it comes to the cooling solution, the water loop in this case is built differently from traditional PC cases. The DistroCase™ 350P Mid Tower Chassis is a fully modular designed chassis with a distro plate as the chassis' main body. This multi-functional PC enclosure is incorporated with its own water channels, reservoir, and multiple inlets and outlets. You can house up to a 280mm or 360mm radiator at the front and 360mm radiator on the side. DMD – Dismantlable Modular Design The DistroCase™ 350P enables user to freely build the system from the ground up with given modular panels, racks, brackets, and pre-design mounting arrays. No more unreachable screw corners or gaps and enjoys installation in a breeze with Dismantlable Modular Design. Technical Data Case Type: Mid Tower Dimension: 567 x 333 x 490mm (H x W x D) Net Weight: 17.78 kg / 39.2 lbs Side Panel: 1x 5mm Tempered Glass Color: Black Material: SPCC & PMMA Drive Bays: ACCESSIBLE: 2 x 2.5”,HIDDEN: 2 x 3.5" or 4 x 2.5" Expansion Slots: 6 Motherboards:: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) I/O Port: USB 3.0 x 2, USB 2.0 x 2, HD Audio x 1 PSU: Standard PS2 PSU (optional) Radiator Support Front: 1 x 360mm or 1 x 240mm or 1 x 120mm 1 x 280mm or 1 x 140mm Left Side: 1 x 360mm or 1 x 240mm or 1 x 120mm Clearance CPU cooler height limitation: 130mm VGA length limitation: 320mm (With Reservoir & Radiator) PSU length limitation: 200mm
Füüsilised andmed: EMAPLAADI TUGI: ATX; Micro-ATX; Mini-ITX GRAAFIKAKAARDI PIKKUS KUNI: 400 mm PROTSESSORI ÕHKJAHUTI KÕRGUS KUNI: 165 mm TOITEPLOKI ÜHILDUVUS: ATX PS2; 200 mm KÕRGUS: 427 LAIUS: 280 SÜGAVUS: 440 mm Ühenduvus: I/O PANEEL: 1x USB 2.0 (internal connection); 2x USB 3.0 (internal connection); HD Audio; Reset switch Kettasahtlid 2.5": 4x 2.5" pesa 3.5": 2 Ventilaatoritugi: TAHA PAIGALDATUD 1 x 120mm Umbra Void ARGB PWM ÜLESSE VÕIMALIK PAIGALDADA 3x 120 TAHA VÕIMALIK PAIGALDADA 1x 120
