O11 DYNAMIC MINI Think Big. Build Small. O11D MINI adding to the O11 Dynamic series, the classic and mordern looking. A case that would accommodate the maximum number of water-cooling configurations without being oversized. With a modular back panel design, the user has the option to choose from 3 slots/ 5 slots/ 7 slots I/O shield to optimize the case to the configuration of user’s choice. Supports mini-ITX, micro-ATX, ATX, and E-ATX motherboard sizes. and up to 9 fans to cool the chassis.
BEYOND THE POWER MAG FORGE 321R AIRFLOW Supports up to 360 mm AIO liquid cooler and large 40 series GPU. Supports up to 11 x system fans configuration, providing ventilation and stable performance to the whole system. Built-in ARGB fans and control board, providing striking lighting and vivid lighting effects. 1 x USB 3.2 Gen 2x2 Type-C port (20Gbps) & 2 x USB 3.2 Gen 1 Type-A ports (5Gbps). Tempered Glass Side Panel displays ARGB lighting effects. The Magnetic Dust Filter on the top vents being easily remove for cleaning. LED Switch button provides intuitively control & 9 lighting effects.
This cable from Aquacomputer, is used for emergency shutdown of the computer in case of alarm. It is compatible with the Vision series and connects to the power button input of the main board without affecting the power button. Included in delivery: 1x cable (length 70cm) Compatible with the following devices: cuplex cryos NEXT with VISION VISION connection terminal for cryographics (23664, 23665, 23666, 23667) VISION Touch (53232, 53235) OCTO (53286) Note: Before connecting the cable, please make sure that the alarm output/tacho signal output of the corresponding device is configured correctly! Brief instructions: Settings for VISION devices (in aquasuite software): Tab "Alarm settings": Selection item "Power button (53216)" must be activated. Only then connect the alarm cable to the mainboard. Then check the correct function by provoking an alarm. If the PC does not switch off, turn the plug on the mainboard 180 degrees and repeat the test. During the emergency shutdown data can be lost because the operating system and open programs are not closed properly!
Mounting bracket allows Akasa ITX chassis with Vesa design to be mounted on the wall.The mounting bracket can also work with all kind of VESA mounting device like monitors, LCD TV etc.Toote värvMustMaterjalSPCCKaal215 gLaius134 mmSügavus123 mmKõrgus8,5 mm
No. of drive bays: 3 MOLEX power connectors: 2 Floppy power connectors: 0 SATA power connectors: 2 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 1 Number of power supply connector 4+4-pin 12V: 0 8-pin 12V power connectors: 0 Dimensions: 290mm x 92,5mm x 280mm Weight: 3
Dimensions: 325 x 166 x 310 mm Other features: Top fan: 2 x 120 mm Rear fan: 1 x 80 mm (1 x SSR3 80mm included) Bottom fan: 2 x 140 mm (without 2-slot GPU) Top radiator: 120/240 mm or 2 x 120 mm
I/O PORTS: 2 x USB 3.2 Gen1 Type-A / 1 x HD Audio / 1 x Mic DRIVER BAYS: 2 x 3.5” (compatible with 2.5”) + 3 x 2.5” CASE EXPANSION SLOTS: 7 MAXIMUM GPU LENGTH: 330 mm MAXIMUM CPU COOLER LENGTH: 160 mm POWER SUPPLY: Standard ATX 160 mm, max to 200 mm (without 3.5” HDD case installed) COOLING LAYOUT: Front - Up to 3 x 120 mm / 2 x 140 mm Top - Up to 2 x 120 mm / 2 x 140 mm Rear - Up to 1 x 120 mm PRE-INSTALL FAN: Front - 2 x 120 mm addressable RGB LED Fan included Rear - 1 x 120 mm System Fan included RADIATOR LAYOUT: Front- Up to 240 mm Top - Up to 240 mm Rear- Up to 120 mm FORM FACTOR: Mid-Tower SUPPORT MB FORM FACTOR: ATX / mATX / Mini-ITX DIMENSION: 421(D) x 210(W) x 499(H) mm 17.05(D) x 8.27(W) x 19.65(H) inch WEIGHT: 5.64 kg
