No. of drive bays: 9 Dimensions: 530 x 232 x 545.5 mm Weight: 19.8 Other features: Case Expansion Slots 8+2 Maximum GPU Length 400mm Maximum CPU Cooler Length 170mm Radiator Compatibility 120 / 140 / 240 / 280 / 360 mm Fan: Front: Up to 3 x 120mm / 3 x 140mm /2 x 200mm (2 x 200mm System Fans included) Top: Up to 3 x 120mm / 2 x 140mm /2 x 200mm Rear: Up to 1 x 120mm / 1 x 140mm (1 x 120mm System Fan included)
Kompaktes Gaming-Gehäuse, aus hochwertigem Aluminium in Silber, für Mini-ITX-Mainboards (Intel & AMD) & SFX-PSUs, Dual-Slot-GPU bis 33 cm, 6x 2,5- oder 3x 3,5-Zoll-Drives
Product kirjeldus: SilentiumPC Ventum VT2 EVO TG ARGB - Torn - ATX Product Type: System cabinet Form Factor: Torn värv: must I/O Ühendusi: 2 x USB 3.2 Gen 1 1 x kõrvaklapid 1 x microphone Supported Motherboards: ATX, microATX, Mini-ITX System Cabinet Features: Meshed front panel, tempered glass side panel, toetab 120/140/240/280/360 mm radiator in front panel, toetab 120/240 mm radiator in top, top magnetic dust filter, transparent left side panel, ASUS Aura Sync RGB illumination, ASRock Polychrome SYNC, Gigabyte RGB Fusion Ready, MSI RGB Mystic Light Sync, ARGB fans, LED control button Power Device: No toiteplokk Specification Compliance: ATX / PS/2 mõõtmed (WxDxH): 21.5 cm x 37.4 cm x 44.1 cm kaal: 4.55 kg
Experience the gaming case 803B from LC-Power! Shaded X offers you a lot of features and a great variety of system configurations for ATX, Micro ATX and Mini ITX systems!
Tutvustame Win EM-013, keerukat ja mitmekülgset elektroonilist metronoomi, mis on loodud selleks, et aidata muusikutel kõigil tasemetel parandada oma ajastust ja rütmioskusi. Selles elegantses ja kompaktses seadmes on ühendatud uuenduslik tehnoloogia ja kasutajasõbralikud funktsioonid, mis teeb sellest asendamatu vahendi nii harjutamiseks kui ka live-esinemiseks. Win EM-013 on intuitiivse kasutajaliidesega, mis muudab selle kasutamise lihtsaks, ning selge digitaalne ekraan võimaldab teil määrata täpseid temposeadeid vahemikus 30 kuni 250 lööki minutis. See pakub laia valikut erinevatele muusikastiilidele sobivaid taktimärke ja rütmimustreid, nii et muusikud algajatest kuni professionaalideni leiavad oma harjutusvajaduste jaoks sobiva rütmi. Win EM-013 konstruktsiooni keskmes on vastupidavus ja kaasaskantavus. Tänu kergele konstruktsioonile ja mugavale suurusele on seda lihtne kanda pilli kohvris, reisikotis või taskus, nii et saate selle asendamatu tööriista kõikjale kaasa võtta. Metronoomil on sisseehitatud kõlar, mis annab selget ja tugevat heli, mida saab reguleerida vastavalt erinevatele keskkondadele, nii et saate rütmi kuulda ka valjemas keskkonnas. Samuti on sellel kõrvaklapipesa privaatseks harjutamiseks, nii et kasutajad saavad keskenduda ilma häireteta. Win EM-013 on varustatud ka tap tempo funktsiooniga, mis võimaldab kasutajatel tempo seadistada lihtsalt nupule vajutades - see on mugav funktsioon muusikutele, kes soovivad tempot kuulmise järgi sobitada. Lisaks võimaldab mälufunktsioon salvestada eelistatud seaded, mis tagab kiire ja lihtsa seadistamise tulevaste seansside jaoks. Win EM-013 on mõeldud pikaajaliseks kasutamiseks, seega töötab see usaldusväärselt alati, kui inspiratsioon tabab. Olenemata sellest, kas olete õpilane, õpetaja või kogenud esineja, Win EM-013 on usaldusväärne ja asendamatu tööriist veatu ajastuse ja muusikalise esituse täiustamiseks. Tänu oma täpsusele, kasutusmugavusele ja kaasaskantavusele on see metronoom loodud selleks, et aidata ja inspireerida muusikuid saavutama rütmilist tipptaset.
Cabinet Form Factor: Mini Torn Mainboard Form Factor1sisseehitatud Devices: LED Indicator Power Button Reset Button Supported Mainboard Form Factor120mm USB 2.0: 1(USB 2.0 (type A)) Audio liides: 2 (3.5-mm minijack) USB 3.01CPU Cooler Maksimum kõrgus: 160 mm Expansion Card Max pikkus: 350 mm Chassis Features10 mm kõrgus (mm): 420 mm laius (mm)1Box pikkus (mm): 486 mm Box laius (mm)1EAN Code: 471
Modulares SFF-Gehäuse für Mini-ITX-Mainboards, robuster Edelstahlrahmen mit variablen Streben, vertikaler Grafikkarteneinbau mit bis zu 358 mm Länge, bis zu 8x 140-mm-Lüfter, Radiatoren bis 280 mm, ATX- oder SFX-Netzteile
Modulares SFF-Gehäuse für Mini-ITX-Mainboards, robuster Edelstahlrahmen mit variablen Streben, vertikaler Grafikkarteneinbau mit bis zu 358 mm Länge, bis zu 8x 140-mm-Lüfter, Radiatoren bis 280 mm, ATX- oder SFX-Netzteile
Modulares SFF-Gehäuse für Mini-ITX-Mainboards, robuster Edelstahlrahmen mit variablen Streben, vertikaler Grafikkarteneinbau mit bis zu 323 mm Länge, bis zu 8x 140-mm-Lüfter, Radiatoren bis 280 mm, ATX- oder SFX-Netzteile
Modulares SFF-Gehäuse für Mini-ITX-Mainboards, robuster Edelstahlrahmen mit variablen Streben, vertikaler Grafikkarteneinbau mit bis zu 323 mm Länge, bis zu 8x 140-mm-Lüfter, Radiatoren bis 280 mm, ATX- oder SFX-Netzteile
The Raspberry Pi 5 case is made of ABS construction with cut-outs for the dual HDMI, Audio/Video, USB, Ethernet ports, as well as the USB-C power connector and access to the microSD card. The status LED can be easily visible through the rubber reflector. An optional clip-on lid can be removed to provide access to your Raspberry Pi's GPIO pins or connect a HAT. The case is a refinement of the Raspberry Pi 4 case, with improved thermal features to support the higher peak power consumption of Raspberry Pi 5. It integrates a variable-speed fan which is controlled by a dedicated connector on the Raspberry Pi 5 PCB. The case is available in Pi's signature red-white combination.
The DIGITUS wall-mounted data communications cabinet is equipped with a glazed door and a cable gland in the roof and floor. The steel structure is made of steel sheet up to 1.5 mm thick. It is possible to change the side of the door hinges and adjust the depth. The rack cabinets are delivered unassembled, in a flat package. Assembly takes place in a few simple steps thanks to the included step-by-step instructions. Installation cabinet supplied unassembled Quick installation Door opening angle: 200° 1-point locking on front door 483 mm (19") rack profiles mounted at the front inside the cabinet, galvanized 483 mm (19") rack profiles with depth adjustment 1.1-1.5 thick, high-strength sheet steel, powder-coated Cable inlet with brush strip in the roof and plastic cover in the floor Ventilation slots for active and passive air supply and exhaust Front door: glass, single Side panels: on two sides Assembled: no
Darkflash DRX90 Mesh computer case (white)If you're looking for a case that combines modern design with functionality and flexibility, the DarkFlash DRX90 Mesh is an excellent choice. Created for high demands, it offers excellent ventilation, support for modern components, and an aesthetically pleasing finish that will perfectly complement any computer set-up.Magnetic front panelThe darkFlash DRX90 Mesh case is distinguished by its magnetic front panel. The mesh from which it is made ensures maximum ventilation, especially with demanding components that generate a lot of heat. Removal of the panel is simple and tool-free, thanks to a hinged "clamshell" mechanism.Spacious and compatibleThe DRX90 Mesh supports ATX, Micro-ATX and ITX motherboards, making it a versatile choice for various configurations. The interior allows the installation of graphics cards with a maximum length of 395 mm and CPU coolers up to 185 mm high. With seven PCI slots, it allows the installation of a wide range of expansion cards. The DRX90 Mesh also provides space for two 2.5"/3.5" drives, as well as an additional 2.5" SSD bay. This allows you to customize your configuration to meet changing requirements, while keeping the inside of the case tidy.Advanced cooling optionsThe DRX90 Mesh provides support for up to 12 120mm fans or 6 140mm fans, offering versatile cooling configuration options. You can mount up to 360 mm heatsinks on the top and front of the case, as well as a 120 mm heatsink on the back - an ideal option for water cooling. With adequate airflow, you'll keep temperatures low even when running demanding software.Graphics card holderThe built-in graphics card holder is a practical addition that ensures the stability of heavy GPU models. The adjustable mechanism allows you to adjust the height to accommodate different card thicknesses, which reduces the risk of damage and improves the aesthetics of the installation.Tidy and dust-freeThe case has been designed with neat cable routing in mind. Rubber cable grommets facilitate organization by minimizing the visibility of cables. The spaciousness of the interior allows for unobstructed cable routing while ensuring unobstructed airflow. What's more, the DRX90 Mesh is equipped with dust caps to protect I/O ports from dirt, as well as dust filters on the front, top and bottom panels. This will keep the inside of your computer clean and efficient for a long time.I/O ports always at handThe darkFlash DRX90 Mesh chassis offers a conveniently located I/O panel with a USB-C port, USB 3.0, USB 2.0, HD Audio connector and Power and Reset button. It's ideal for those who appreciate easy access to the most important ports.Durable construction and modern designThe case is made of 0.6 mm thick steel and tempered glass. A reinforced base with trapezoidal feet reduces vibrations and increases the stability of the case. The minimalist industrial look of the mesh front panel blends perfectly with modern gaming PC interiors.IncludedCaseDust caps (USB-C, HD Audio)Set of mounting screwsUser manual ManufacturerDarkflashModelDRX90 MeshHousing typeMid TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5'HDD x2, 2.5'SSD x1Expansion card slots7Max PSU length250 mmMax length of graphics card395 mmMax height of CPU cooler185 mmMax number of fans12Fan mounting optionsTop: 120 mm x3/140 mm x2; Front: 120 mm x3/140 mm x3; Rear: 120 mm x1/140 mm x1; Bottom: 120 mm x3Water cooling mounting optionsTop: 240, 280, 360 mm; Side: 120 mmNumber of fans installedFront: 3; Rear: 1Type of fansC7, RGB, 120 mmButtons and controlsPower, Reset, LED, fan speed controlConnectorsUSB3.0 x1, USB2.0 x1, Type-C x1, HD AudioMaterial0.8 mm SPCCColorWhiteHeight460 mmWidth230 mmDepth465 mmWeight8.2 kg
