Elegant midi-tower by ASUS in white, side panel made of tempered glass, removable top, 4x 140-mm fans with ARGB pre-installed, space for 1x 280/360-mm radiator, graphics cards up to 407 mm, 2x USB 3.2 Gen1 / 1x USB 3.2 Gen2x2 Type-C
GETTING INTO THE GAME. Are you building a gaming computer? Then of course you need your gaming rig to have a sturdy, well-thought-out, well-designed and good-looking case. One with four mounted ARGB fans, an airy front and top, and dust filters. And even better if the side panel was made into a tempered glass door. This is where Case Logic Concept Portos MIDI comes to the rescue. A concrete competitor for gaming tasks to ensure good airflow, component culture, their safety and low temperatures of installed components. Computer case that has everything you need. OPEN YOURSELF TO NEW A side panel made of tempered glass in the form of a hinged door makes it easier not only to install components, but also to keep the computer clean. Just open the door and clean the center with compressed air. Isn't it simple and practical? It's the only one we want to give you, because they simply belong to you. TO HOT COMPONENTS SAY "NO" An airy front and top panel significantly facilitates air circulation. As many as three 120 mm fans on the front and one 120 mm fan on the back Cases effectively cool the heated components. All for your comfort and the safety of your computer. Always willing to play Logic PORTOS ARGB MIDI is a case created to build an efficient and modern gaming PC. Optimal airflow, practical solutions and pre-installed ARGB fans make up its gaming character. READY FOR GAMING COMPONENTS The ability to mount graphics cards up to 340 mm and a maximum CPU cooling height of 155 mm allows the installation of most high-performance components available on the market. PROTECT YOUR COMPUTER FROM DUST THREE DUST FILTERS A dust filter has been placed under the power supply unit. It minimizes the amount of dust sucked in by the PSU's fan, positively affecting its operating temperature and service life. An additional filter is located on top of Cases. This effectively traps unwanted dust and protects the installed components. It protects against dust that enters the computer by gravity throughout the day, even when the computer is turned off. All the effective protection is complemented by mesh mesh on the front panel. OPTIMAL AIR CIRCULATION The ventilated front panel provides airflow with three, efficiently operating 120 mm fans. The back of Cases , on the other hand, features one pre-installed 120 mm fan. This allows you to effectively cool the installed components of the computer's interior, positively influencing the culture of their operation and service life. As an option, it is possible to mount three 140 millimeter fans on the front of Cases (in place of the factory-installed ones) and two 120 or 140 millimeter fans on the top on their own. Case It is also adapted for installation of water cooling. ARGB BEAUTY Case for gamers must look nice. That's why the pre-installed ARGB fans add beauty to the case and the gaming stand. The backlight color can be changed at will from the predefined settings using the RESET button on the control panel Cases. Convenient access to the top panel Convenient access to the top panel, and there are two USB 2.0 and one USB 3.0 connectors, plus one minijack connector for headphones and microphone, a power button and a button to control the fan backlight. SIMPLE INSTALLATION Everything here is well thought out and intuitive. Building a computer in this case is a pleasure and is child's play. POWER SUPPLY A gaming computer must have a good and powerful power supply. That's why we made sure that it has a home here! The maximum length of the power supply with the disk cage installed is 200 mm. A dust filter has been placed under the power supply, which effectively protects the operation of the power supply from dust. 7 PCIe expansion card slots Seven slots for PCIe expansion cards. This is the optimal number for mounting a graphics card and a network card, among others. NEED SPACE FOR GAMES? YOU HAVE IT IN ABUNDANCE! The mounting of HDD or SSD drives is obviously thought out here as well. Inside Cases at tunnel level there is a basket for 3.5" or 2.5" drives. On the motherboard tray, on the other hand, it is possible to mount two additional 2.5" drives. On the motherboard mounting wall, another two 2.5" (with a microATX or ATX motherboard size). A total of 5 SSDs and 1 HDD or 4 SSDs and 2 HDDs can be installed.
Tootekood: AIR 100 LITE (W)GTIN: 4710562740882Korpused
Small midi tower with tempered glass on the side, up to eight fans, space for a radiator up to 280mm, motherboards up to micro-ATX, GPU up to 330mm, and CPU cooler up to 161mm height, up to four drives possible, two 120mm fans included - Compact case with side panel made of tempered glass - Efficient cooling options with up to eight fans and radiators up to 280mm - Support for motherboards up to Micro-ATX - Space for graphics cards up to 330mm and CPU coolers with a height of up to 161mm - Up to four drives possible - Two 120mm fans included The Montech AIR 100 LITE: Minimalist case with high cooling performance The Montech AIR 100 LITE is the smaller variant of the Montech AIR 100 and impresses with its lightweight and minimalist design. Nevertheless, this Midi-Tower offers you extensive options for installing your hardware - particularly a variety of fans to keep your system cool. Well-cooled with fans and radiators Despite its small size, up to eight fans can be installed in the tower. The front supports a maximum of three 120mm or two 140mm fans. You can install two 120mm or 140mm fans on the top. A further 120mm fan can be installed at the back, as well as up to two additional 120mm fans above the power supply chamber. Two 120mm fans are already included at the front and back. If you prefer liquid cooling - whether it's an all-in-one liquid cooler or a custom-built liquid cooling system - there are several places to install a radiator. The front supports a radiator up to a maximum of 280mm, the top supports a 240mm radiator, and a further 120mm radiator can be installed at the back. Hardware options The Midi-Tower supports the installation of graphics cards up to a size of 330mm. Motherboards are compatible up to the Micro-ATX format. The CPU cooler should not exceed a height of 161mm. To store programs and games, up to four drives can be installed.
Tootekood: AIR 100 LITE (B)GTIN: 4710562740691Korpused
Small midi tower with tempered glass on the side, up to eight fans, space for a radiator up to 280mm, motherboards up to Micro-ATX, GPU up to 330mm and CPU cooler up to 161mm in height, up to four drives possible, two 120mm fans includedSmall case with tempered glass side panel Efficient cooling options with up to eight fans and radiators up to 280mm Support for motherboards up to Micro-ATX Space for graphics cards up to 330mm and CPU coolers with a height of up to 161mm Up to four drives possible Two 120mm fans included The Montech AIR 100 LITE: Minimalist case with high cooling performance The Montech AIR 100 LITE is the smaller variant of the Montech AIR 100 and impresses with its lightweight and minimalist design. Nevertheless, this midi tower offers extensive options for installing your hardware - particularly a variety of fans to keep your system cool. Well-cooled with fans and radiators Despite its small size, up to eight fans can be installed in the tower. The front supports a maximum of three 120mm or two 140mm fans. You can install two 120mm or 140mm fans at the top. A further 120mm fan can be installed at the rear, as well as up to two more 120mm fans above the power supply chamber. Two 120mm fans are already included at the front and rear. If you prefer water cooling - whether an all-in-one water cooler or a custom-built water cooling system - there are several locations where a radiator can be installed. The front supports a radiator up to a maximum of 280mm, the top supports a 240mm radiator, and another 120mm radiator can be installed at the rear. Hardware options The midi tower supports the installation of graphics cards up to 330mm in size. Motherboards up to Micro-ATX format are feasible. The CPU cooler should not exceed a height of 161mm. To store programs and games, up to four drives can be installed.
The Lian Li DAN Cases A3-mATX Wood Edition in white combines minimalist design with luxurious functionality. With its elegant beech wood front, excellent airflow thanks to mesh panels, and flexible customization options, it’s the perfect choice for anyone wanting a powerful, compact setup. White micro-ATX case from Lian Li in cooperation with DAN Cases Elegant front cover made of fine beech wood and side panel of tempered glass Mesh panel on the top for excellent airflow Flexibly customizable: let your imagination run wild Outstanding cooling thanks to support for 360 mm radiators Compatible with Micro-ATX or Mini-ITX motherboards Supports different power supplies from SFX to ATX A touch of luxury: The Lian Li DAN Cases A3-mATX Wood Edition in white If you are looking for a small form factor case for high-performance PC hardware, the Lian Li DAN Cases A3-mATX Wood Edition is worth a closer look. This white case combines minimalist design with luxurious features: the fine beech wood front gives your setup a touch of exclusivity. With a capacity of about 26 liters, this white micro-ATX case is compact and saves space. At the same time, the A3-mATX Wood Edition is perfect for high-end PC components, as it provides effective cooling despite its small size. Thanks to ample space for fans and radiators and generous ventilation openings, this mini-tower easily meets the needs of powerful hardware. Flexibility meets performance: The fan and cooling options of the Lian Li DAN Cases A3-mATX Wood Edition in white The white Lian Li DAN Cases A3-mATX Wood Edition accommodates up to 10 fans in the 120 mm format. These can be distributed as follows: three on the top, three on the side, three on the bottom, and one at the rear. Alternatively, two 140 mm fans can be mounted on both the top and the side. With 25 mm thick fans at the bottom of the case, GPU height is limited to 61 mm (3 slots). CPU air coolers can have a maximum height of 165 mm. Lian Li and Daniel Hansen from DAN Cases also considered water cooling in the development of the A3-mATX: A radiator can be installed in three locations inside the case: on the top or side, with support for up to a 360 mm (triple radiator) or 280 mm (dual radiator). Here, you have to choose between the two positions. The bottom of the white case can accommodate an additional 240 mm radiator. If you mount the fans below the radiator, you can even install a 360 mm radiator. Customizable configuration: The versatile options of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX in white is suitable for a motherboard in the Micro-ATX or Mini-ITX form factor. Unlike a mini-ITX case, this PC case allows you to install a graphics card up to 4 slots high and up to 415 mm long, thanks to its 4 expansion slots. The drive cage provides space for two 2.5-inch SSDs. At the bottom of the white case, you can also install a 3.5-inch HDD or another 2.5-inch drive. Choose between an ATX, SFX-L, or SFX power supply and mount it flexibly at the front or side, creating extra space for your graphics card or radiator—just as you need. With the A3-mATX, the smaller your power supply, the more space you have for the rest of your hardware. The I/O panel on the front of the Lian Li DAN Cases A3-mATX Wood Edition—white offers two USB 3.0 Type-A ports, one USB 3.1 Type-C port, two 3.5 mm audio jacks (mic-in/audio-out), and a power button for switching on. Note: The Lian Li DAN Cases A3-mATX Wood Edition offers numerous configuration options, but space inside this case is limited. The size and position of the power supply are crucial for choosing the right PC components. That's why we recommend careful planning in advance using the manual.
ASUS 90DC00M0-B39040. Type: PC, Produktfarve: Sort, Understøttet motherboard, formfaktorer: ATX. Frontventiler installeret: 2x 160 mm, Understøttede diametre for frontventilatorer: 140,160 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 412 mm, Højde: 503 mm
ASUS ROG Strix Helios II. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Frontventiler installeret: 3x 140 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 250 mm, Dybde: 565 mm, Højde: 591 mm
Das Elite 690 verfügt über zwei gehärtete Glasscheiben, die Ihr System in Szene setzen, während eine holzstrukturierte Front und ein Mesh-Einlass Wärme mit effizientem Luftstrom verbinden. Dank der oberen und unteren Belüftung für vertikale Kühlung unterstützt es vielseitige Lüfter- und Kühlerkonfigurationen – perfekt für leistungsorientierte oder stilvolle Systeme. Die vertikale Anordnung trennt die Wärmezonen für eine bessere Luftzirkulation und eine sauberere Kabelführung. Bis zu 10 Lüfter in einer von unten nach oben verlaufenden Anordnung maximieren den Luftstrom und die Kühlung. Die aus echtem Holz gefertigte Frontplatte verleiht jedem Raum eine warme, organische Note. Das Gehäuse enthält 3 in Reihe schaltbare ARGB-Lüfter mit vollständiger Unterstützung für die Beleuchtungssynchronisierung des Motherboards. Das Elite 690 verfügt über einen USB 3.2 Gen 2x2 Typ-C und zwei USB 3.0-Anschlüsse für blitzschnelle Konnektivität.
be quiet! Pure Base 600. Kujutegur: Miditorn, Tüüp: PC, Materjal: ABS-sünteetika, Teras. Toetatud elektritoite tarne vormi faktorid: ATX. Installitud esiventilaatorid: 1x 140 mm, Installitud tagaventilaatorid: 1x 120 mm
MidiTower, M/B Type mini-ITX/m-ATX/ATX, USB 3.0 x2, RGB LED Switch, Reset Button, Audio In & Out (Supports AC97 / HD Audio), w/o PSU, Dimensions 480x210x435mm
Lupus 27 Computer Midi Tower ATX PC Case is a new case from the iBOX brand. This time we get extremely interesting combinations of tempered glass on the side panel of the housing with a front made of a special mesh, under which there are RGB fans. This interesting combination gives the housing a unique look and makes your gaming stand look even better. The case is designed with gamers in mind. The power supply is mounted at the bottom in a special tunnel that separates it from the rest of the case. In addition, the housing is equipped with a set of filters limiting dust access to the interior. It has a USB 3.0 port and two USB 2.0 ports. Three 120mm RGB backlit fans are mounted on the front and one 120mm fan is mounted on the back of the case. The side window is made of tempered glass. This interesting combination of 3 materials (glass, metal and plastic) makes Lupus 27 an extremely interesting proposition.
Well-equipped midi tower, front side panel made of tempered glass, side panel on hinges, 3x 140mm and 3x 120mm fans pre-installed, GPU length up to 305 mm
Full Tower CTE C750 TG ARGB case The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for Centralized Thermal Efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB is a high-end presentation case that allows you to imagine something outside the box. Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE C750 TG ARGB's versatile interior includes two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. Perfect protection against dust There are small details on the top, front, bottom, rear and right side of the housing, removable filters that provide excellent dust protection and can be easily removed for cleaning.
Midi-tower case with tempered glass, very good airflow, offers D-RGB lighting, four integrated 140mm D-RGB fans, compatible with MSI Project Zero and ASUS BTF motherboards
Toetatud emaplaadid: ATX, EATX, micro ATX, Mini-ITX; Piisavalt ruumi tõhusaks jahutamiseks; Optimeeritud õhuringlus; USB-pordid: 2x USB 3.2 Type-A, 1x USB 3.2 Gen 2x2 Type-C
The ASUS TUF Gaming A2 storage enclosure offers a durable solution for your solid-state drives. Constructed with aluminum and silicone rubber, this enclosure withstands various environmental conditions while maintaining optimal performance. It supports M.2 NVMe cards and ensures efficient data transfer with USB 3.2 (Gen 2x2) technology, providing a data transfer rate of 20 Gbit/s. The enclosure features Q-Latch compatibility, enhancing usability and stability in various setups. With an internal design that supports M.2 2242/2260/2280 form factors, the TUF Gaming A2 is versatile for your storage needs.
MASTERFRAME 600 MasterFrame 600 is crafted with high-quality aluminum, featuring a standard chassis design with flexible space configuration to deliver exceptional performance and personalized options. It easily accommodates the latest-generation GPUs, while its optimized thermal layout ensures efficient airflow for stable cooling performance. Whether for gamers or content creators, MasterFrame series meets the dual demands for performance and style, making it the perfect choice for both functionality and customization. EXO-STRUCTUREThe exposed structural design enables the MasterFrame chassis to achieve greater adaptability and offers flexible configuration options for various use cases. ADAPTABLE FRAMEFeature a dynamic design that offers unparalleled flexibility, allowing users to effortlessly adjust sizes to meet various needs. DYNAMIC FRAMESupports modular configurations, allowing flexible hardware adaptability and providing the best upgrade potential for customization and system expansion. VERSATILE AND MAKER-DRIVENActs as a platform for expression and evolution, with interchangeable panels that provide endless customization possibilities, going beyond basic functionality. OPTIMIZED THERMAL LAYOUTProvides an efficient airflow design to ensure stable cooling performance. SUPPORT FOR LATEST-GEN GPUSAccommodates the latest graphics cards, ensuring future-proof compatibility. EXTREME COOLING SUPPORTAccommodates triple 360mm radiators and custom water-cooling solutions, delivering exceptional thermal performance for extreme overclocking and high-performance hardware.
The Montech X5 is a mid-tower case that combines elegant design with solid cooling performance. With a sleek front panel, tempered glass side window, and pre-installed fans, it's the ideal choice for budget-conscious PC setups. Modern mesh front panel with a clean, minimalist look Three 140mm and one 120mm fans pre-installed for instant cooling Tempered glass side window for an unobstructed view of the interior Compatible with E-ATX motherboards and GPUs up to 410 mm in length Spacious interior with tidy cable management Elegant design for any setup Enjoy high compatibility in a compact build with the Montech X5 Mid-Tower. It accommodates large GPUs, powerful cooling systems, and modern cable management—without appearing bulky. The X5 uses a simple front panel without mesh, delivering a clean overall appearance. It's especially suitable for users who value a clear, minimalist look. This case combines performance with style—the RGB lighting delivers an impressive appearance and enhances your entire setup. Whether for a gaming rig or workstation, customizable effects make your PC a real eye-catcher. Solid cooling performance with four fans Keep your components at optimal temperature with the Montech X5, the perfect choice for those who prioritize high-performance cooling. Its airflow-friendly design and optimized airflow architecture ensure ideal cooling, even during long gaming sessions or heavy system loads—a case that perfectly combines performance and cooling. Despite the closed front, four 120mm fans are already installed, providing good basic cooling right out of the box. This means you're ready to go without additional investment. Thanks to the removable dust filters, your case stays free from dust build-up. The filters are easy to clean, so your computer remains optimally cooled at all times. Easy assembly & flexible hardware support The interior offers space for standard ATX motherboards, long graphics cards, and multiple drives. Thanks to its thoughtful structure, installation is quick and straightforward, even for beginners.
