DarkFlash DS900G computer case (white)The DarkFlash DS900G is a mid-tower case that offers extensive functionality for demanding users. It supports ATX, Micro-ATX, and ITX motherboards, and its interior allows for the installation of graphics cards up to 425 mm in length and CPU coolers up to 170 mm in height. The interior space has been designed for easy access to components and convenient expansion. The DS900G also offers full support for various cooling systems, making it easy to handle demanding gaming or work setups.Full interior exposureThe curved side panel made of transparent tempered glass allows a full view of the components installed inside. The slightly rounded surface of the glass creates a panoramic effect that sets the case apart from standard models and allows the lighting and aesthetics of the assembly to be fully exposed.Effective coolingThe case has been designed for optimal air circulation. It allows for the installation of up to 10 120 mm fans or a combination of 2 140 mm fans on the top panel. The design provides for 3 fans at the top, 3 on the side, 1 at the rear, and 3 at the bottom, allowing for a highly efficient cooling system. Additionally, water cooling up to 360 mm in length can be installed on the top panel, and up to 240 mm in length on the side.Optimized airflow and noise reductionThe DS900G case has densely spaced ventilation holes that not only improve airflow but also effectively trap larger dust particles. The rear panel is equipped with a steel mesh that improves cooling efficiency by up to 15% while reducing noise levels by approximately 10%.Magnetic dust filtersMagnetically attached dust filters are located at the top and bottom of the case. This makes them easy to remove and clean without having to disassemble other components. This type of solution facilitates daily computer maintenance and helps to maintain optimal operating conditions for the components.Various expansion optionsThe interior of the case has been designed for users who want to maintain aesthetics and order while having space for all the necessary components. The DS900G offers 7 PCIe slots, giving you the freedom to install long graphics cards and additional expansion cards. The mounting space has been designed to ensure adequate airflow, space for cable management, and quick access to the most important components.Flexible drive mounting optionsThe DarkFlash DS900G allows you to install 2 3.5" HDDs and 2 2.5" SSDs. Depending on your needs, various configurations are possible, such as two HDDs and one SSD, or one HDD and two SSDs. This allows each user to tailor the storage layout to their preferences and the specifics of their setup.Convenient access to ports and buttonsThe case offers a practical set of ports and buttons on the front panel. The user has at their disposal one USB 3.0 connector and two USB 2.0 ports, as well as an HD Audio connector. The front panel also features Power and Reset buttons and a button to control the backlight. ManufacturerDarkFlashModelDS900GCase typeMiddle TowerSide panelTempered glassMotherboard standardATX, Micro-ATX, ITXPower supply standardATXInternal drive bays2 × 3.5" (HDD)2 × 2.5" (SSD)Expansion card slots7 PCIe slotsMaximum graphics card length425 mmMaximum CPU cooler height170 mmMaximum number of fansUp to 10 120 mm fansAdditionally: 2 140 mm fans (top)Fan mounting optionsTop: 3 × 120 mm or 2 × 140 mmSide: 3 × 120 mmRear: 1 × 120 mmBottom: 3 × 120 mmWater cooling mounting optionsTop: up to 360 mm or 240 mmSide: up to 240 mmNumber of fans installedNo fans installedButtons and controlsPower, ResetConnectors1 × USB 3.02 × USB 2.01 × HD AudioMaterialSPCC 0.5 mmColorWhiteHeight454 mmWidth218 mmDepth434 mm
DarkFlash DS900G computer case (black)DarkFlash DS900G is a Middle Tower chassis that offers extensive functionality for demanding users. It supports ATX, Micro-ATX and ITX format motherboards, and its interior accommodates graphics cards up to 425 mm in length and CPU coolers up to 170 mm in height. The interior space is designed for easy access to components and convenient expansion. The DS900G also offers full support for various cooling systems, so it can easily handle demanding gaming or work setups.Full interior displayThe curved side panel made of transparent tempered glass allows a full view of the components installed inside. The slightly rounded surface of the glass creates a panoramic effect that sets the case apart from standard models and allows the backlighting and mounting aesthetics to be fully exposed.Effective coolingThe case is designed for optimal air circulation. It allows the installation of up to 10 120 mm fans or their combination with 2 140 mm fans on the top panel. The design provides for 3 fans on the top, 3 on the side, 1 on the back and 3 on the bottom, allowing for a very efficient cooling system. In addition, up to 360 mm of water cooling can be installed on the top panel, and up to 240 mm on the side.Optimized airflow and noise reductionThe DS900G chassis features densely spaced vents that not only improve airflow, but also effectively trap larger dust particles. The rear panel is equipped with a steel mesh that improves cooling efficiency by up to 15% while reducing noise levels by about 10%.Magnetic dust filtersThere are magnetically attached dust filters on the top and bottom of the case. As a result, they can be easily removed and cleaned without removing other components. This type of solution simplifies the daily maintenance of the computer and helps maintain optimal operating conditions for components.Various expansion possibilitiesThe interior of the chassis was designed for users who want to keep the chassis aesthetically pleasing and tidy, while still having room for all the components they need. The DS900G offers 7 PCIe slots, which gives you the freedom to mount long graphics cards and additional expansion cards. The mounting space has been planned to ensure adequate airflow, room for cable routing and the ability to quickly access critical components.Flexible disk mounting optionsDarkFlash DS900G allows the installation of 2 HDDs in 3.5" format and 2 SSDs in 2.5" format. Depending on the user's needs, various configurations are possible, such as two HDDs and one SSD or one HDD and two SSDs. This allows each user to tailor the storage layout to their own preferences and the specifics of the set.Convenient access to ports and buttonsThe case offers a practical set of ports and buttons on the front panel. The user has one USB 3.0 and two USB 2.0 ports, as well as an HD Audio connector. The front also features Power, Reset and backlight control buttons. ManufacturerDarkFlashModelDS900GHousing typeMiddle TowerSide panelTempered glassMotherboard standardATX, Micro-ATX, ITXPower supply standardATXSlots for internal drives2 × 3.5" (HDD)2 × 2.5" (SSD)Expansion card slots7 PCIe slotsMax graphics card length425 mmMax CPU cooling height170 mmMax number of fansUp to 10 120 mm fansIn addition: 2 140 mm fans (top)Fan mounting optionsTop: 3 × 120 mm or 2 × 140 mmSide: 3 × 120 mmRear: 1 × 120 mmBottom: 3 × 120 mmWater cooling mounting optionsTop: up to 360 mm or 240 mmSide: up to 240 mmNumber of fans installedNo fans installedButtons and controlsPower, ResetConnectors1 × USB 3.02 × USB 2.01 × HD AudioMaterialSPCC 0.5 mmColorBlackHeight454 mmWidth218 mmDepth434 mm
Die einzigartige dreiteilige Front aus gehärtetem Glas ermöglicht eine freie Sicht auf die PC-Komponenten und die RGB-Beleuchtung. Das macht Ihr Gehäuse zu einem einzigartigen Mittelpunkt im Pool der überfluteten PC-Gehäuse im Aquarium-Stil. Das View 370 TG ARGB ist mit einem SF360 ARGB PWM Reverse-Lüfter auf der MB-Seite und einem SF120 ARGB PWM-Lüfter auf der Rückseite vorinstalliert. Die speziellen Aussparungen im Motherboard-Tray unterstützen die neuesten Motherboards mit versteckten Anschlüssen (sowohl ATX als auch Micro-ATX) der wichtigsten Marken, darunter: ASUS BTF Serie, MSI PROJECT ZERO Serie, und GIGABYTE PROJECT STEALTH Serie. Das View 370 TG ARGB verfügt über drehbare PCIe-Steckplätze, die es dem Benutzer ermöglichen, die Grafikkarte mit Hilfe eines Riser-Kabels (separat erhältlich) vertikal zu installieren. Bei diesem Setup ist die GPU mit der Lüfterseite zur Gehäuseseite ausgerichtet, was eine andere visuelle Darstellung ermöglicht. View 370 TG ARGB ist mit dem 6-Zoll-Bildschirm-Kit (separat erhältlich) kompatibel, das an der Vorderseite der Netzteilabdeckung montiert werden kann. Mit dem LCD-Display können Benutzer die TT RGB Plus-Software verwenden, um die volle Kontrolle über die Leistungsüberwachung zu erhalten. Wenn es um die thermische Leistung geht, stellt sich oft die Frage nach Staub. Das View 370 TG ARGB ist mit abnehmbaren Staubfiltern ausgestattet, um Ihr System vor Staub und kleinen Partikeln zu schützen. Die Laufwerksplatte unterstützt eine 3,5„-HDD sowie eine 2,5“- oder zwei 2,5"-SSDs.
Tootekood: DB330M WHITE +3FGTIN: 4711527001864Korpused
Darkflash DB330M computer case + 3 fans (white)The Darkflash DB330M is a small and stylish case designed for powerful configurations for office work and more. It is compatible with M-ATX and ITX motherboards and can accommodate graphics cards up to 305 mm in length. With its compact dimensions of 400 x 218 x 333 mm, it is perfect for places where space is at a premium, without compromising on functionality. The set also includes three ARGB fans.Effective coolingThe DB330M case is equipped with three ARGB fans, which not only provide optimal cooling, but also look great. Thanks to them, you can give your workstation an original, gaming character! In addition, numerous ventilation openings and vertical air channels guarantee optimal heat dissipation. Don't worry about your computer overheating! What's more, depending on your needs, the case can accommodate up to 5 fans or water cooling (240 mm at the top and 120 mm at the rear).Ample space for componentsDespite its compact dimensions, the DB330M offers space for a graphics card with a maximum length of 305 mm and CPU cooling up to 180 mm in height. It easily accommodates modern, high-performance components, making it the perfect choice for those building their first gaming and high-performance computers. But that's not all. The case offers four slots for graphics cards – you don't have to limit yourself to just one!Flexible drive installationThe case supports various SSD and HDD configurations – you can install one SSD and one HDD or two HDDs. This allows you to flexibly customize the system to your needs! Thanks to this, you don't have to worry about running out of space for your files.Several useful portsThe case offers one USB 2.0 port and one USB 3.0 port for fast data transfer. In addition, there is an audio jack socket for convenient connection of headphones or a microphone.Minimalist designThe DB330M case will not only allow you to build a powerful computer, but also decorate your workstation. It stands out with its minimalist, modern design with transparent panels. Combine it with RGB-backlit components for a unique visual effect! There are also numerous cable grommets to help you organize your cables. And if necessary, you can easily remove the left and right panels of the case – no additional tools are required. ManufacturerDarkflashModelDB330MCase typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardATX at the bottomInternal drive bays3.5'HDD x2, 2.5'SSD x1Expansion card slots4Max power supply length240 mmMax graphics card length305 mmMax CPU cooler height180 mmMax number of fans5Fan mounting optionsTop: 120 mm x2/140 mm x2; Rear: 120 mm x1; Bottom: 120 mm x2Water cooling mounting optionsTop 240 mm; Side 120 mmNumber of fans installedNo fans installedFan typeNo fans installedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x1, HD AudioMaterial0.8 mm SPCCColorBlackHeight400 mmWidth218 mmDepth333 mmWeight5.3 kg
Das RM53-502 unterstützt Mainboards mit einem Formfaktor bis zu SSI EEB und besitzt zudem insgesamt 8 PCI-Erweiterungssteckplätze, die problemlos bis zu 4 Grafikkarten in Servergüte aufnehmen. Die von der Vorderseite zugänglichen Anschlüsse für Erweiterungssteckkarten und das Design der E/A-Komponenten sind für diese Ausrichtungsweise mit untereinander austauschbaren Griffleisten und Einschubschienen ausgestattet. Im Inneren sind Optionen in vorder- und rückseitigen Konfigurationen für untereinander austauschbare Montagepositionen des 5,25-Zoll-Käfigs und des Netzteils vorhanden. Entsprechend der SilverStone-Designphilosophie für Gehäuseeinschübe ist das RM53-502 zur Verbesserung der Kühlleistung von Servergehäusen mit Flüssigkeitskühlern in Größen bis zu 360 mm kompatibel, die für eine effiziente Wärmeableitung und optimale Leistung sorgen.
Striking, spacious PC case with glass front and side panel, plus stunning backlighting. The Krux Empero is perfect for anyone who values futuristic design as well as plenty of space for components and long radiators. With the Krux Empero case, you get not only a classic glass side panel, but also a fully glassed front. The tempered glass panels (side, front, and corner) are easy to remove without tools. The set includes four illuminated Krux 120 mm ARGB PWM fans with PWM speed control, which help maintain optimal operating temperatures while providing the entire unit with eye-catching lighting effects. Additionally, easily removable dust filters keep the interior free from dirt and debris. The included splitter for up to 6 fans not only controls fan operation and backlighting but also makes cable management easier. The Krux Empero PC case offers plenty of space for components, including full-size ATX motherboards (or smaller microATX and mini-ITX), GPUs up to 420 mm in length, tower CPU coolers up to 155 mm in height, power supplies up to 205 mm long, five storage drives, and AiO coolers with lengths of 120, 240, 280, and even 360 mm. The standard set of four 120 mm fans can be expanded to a total of ten fans. The I/O panel of the Krux Empero features a range of practical and functional ports. It includes a 3.5 mm combo audio jack (for headphones, speakers, and microphones), buttons to control power and LED backlighting, two standard USB-A ports, and a third, modern USB-C port.
Mit einem 270°-Panoramablick durch nahtlose Hartglasplatten an Vorder- und Seitenfläche präsentiert das Lucid 05 Ihre Komponenten eindrucksvoll aus nahezu jedem Blickwinkel. Der Lucid 05 verfügt über insgesamt 11 Lüfterhalterungen und sorgt so für eine effektive Luftzirkulation nicht nur für CPU und GPU, sondern auch für das System und die Speicherlaufwerke. Das obere Fach unterstützt einen 360-mm-Wasserkühlungsradiator für eine effiziente Wärmeableitung in Hochleistungssystemen. Mit der kürzlichen Einführung der RTX-50-Serie wurde das Lucid 05 so konzipiert, dass es Grafikkarten mit einer Länge von bis zu 410 mm unterstützt.
Clear lines, strong cooling, uncompromising look: With the Steel Shark, Sharkoon presents a stylish two-chamber ATX case that combines modern design with a particularly tidy look. Tempered glass on the front and side, four pre-installed ARGB PWM fans as well as extensive cooling options and BTF support make the Steel Shark the ideal basis for powerful and visually impressive gaming systems. Thanks to the well-thought-out two-chamber design, the Steel Shark clearly separates hardware and power supply including cable management. This creates an extra tidy look in the main area, while cables, drives and power supply can be discreetly stored at the back. The front and side panels of the Steel Shark are made of tempered glass and provide a clear view of the built-in hardware and the integrated lighting. This makes the case perfect for users who want to present their system not only powerfully, but also visually impressively. The Steel Shark is equipped with four 120 mm ARGB PWM fans ex works. These not only ensure an effective airflow, but also skillfully showcase the system visually. A practical ARGB control and a PWM fan hub with five positions are included! A total of up to eleven fans can be installed in the Steel Shark. In addition, the housing supports the simultaneous installation of two radiators and is therefore also aimed at water cooling enthusiasts who want to cool their system particularly efficiently and quietly. In addition to classic ATX motherboards, the Steel Shark also supports models with a BTF design. The rear connection technology further optimizes cable management and further underlines the clean look of the system. The Steel Shark is also flexible when it comes to selecting powerful hardware: It supports graphics cards with a length of up to 424 mm, CPU coolers with a height of up to 168 mm and power supplies with a length of up to 244 mm. Tower case type Color black EAN 4044951044924 Made in China Midi tower design Motherboard form factor ATX Tempered glass material Window Kit Yes Internal dimensions Plug-in card length maximum 424 mm Internal dimensions CPU cooler height maximum 168 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 244 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Front 3 x 120 mm ARGB-PWM fans pre-installed Back 1 x 120 mm ARGB-PWM fan pre-installed Notes Cable management system, graphics card holder, top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed Lighting Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Water cooling possible Supported radiators Front: 360 mm, Top: 360/280 mm Rear connection of the motherboard Yes Note If the graphics card is longer than 270 mm, there may be conflicts when installing a radiator in the side Accessories available accessory set Volume 59 l Dimensions Width: 28.5 cm x Height: 45.2 cm x Depth/Length: 46 cm
We designed the Silentware Core 100 ARGB to make PC building a breeze, even for beginners, eliminating concerns about space, airflow, or cabling. Our standard mesh case comes with four pre-installed Silentware RF120 120mm ARGB PWM fans, ensuring good airflow and effective component cooling. Our front fans are also daisy-chained, allowing for easy connection to the motherboard – no annoying adapters, additional controllers, or software required. Inside, you'll find ample space for your hardware – graphics cards up to 380mm in length and CPU tower coolers up to 165mm in height fit in the Core 100, meaning virtually no limitations on your build. The integrated adjustable graphics card support bracket ensures that even heavy graphics cards (up to 380mm in length) remain perfectly level. The CPU can optionally be cooled with air coolers (up to 165mm height) or an AiO liquid cooling system (radiator up to 360mm). Tower case type color black EAN code 4262483960233 Manufacturer No. CORE100BLACK Made in China Midi-Tower form factor Motherboard form factor ATX Material tempered glass, steel Window Kit Yes Mesh front Yes Internal dimensions: Maximum card length 380 mm Supported radiators (top): 240/280/360 mm 3.5-inch internal drive bays, 1 piece Full-size slots, 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s) Front panel: 3 x 120 mm ARGB PWM fans with hydro bearing pre-installed, alternatively 3 x 140 mm fans can be installed. Rear panel: 1 x 120 mm ARGB PWM fan with hydro bearing pre-installed Notes: Top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed; Power supply cover: 2 x 120 mm fans can be installed Lighting: Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible: Yes Rear motherboard connector: No Volume 50 l Dimensions: Width: 21.5 cm x Height: 49.5 cm x Depth/Length: 46.8 cm
We designed our Silentware Flow 110 A-RGB to make PC building a breeze, even for beginners, without having to worry about space, airflow or cabling. Our high-quality, modern mesh case comes with 4 pre-installed fans that ensure good airflow and thus provide good cooling for the components. In addition, our front fans are connected via daisy chain, so they can be easily connected to the motherboard – without any annoying adapters, additional controllers or software. They are controlled via the motherboard using 4-pin PWM and 3-pin A-RGB 5V connectors. Type Tower case Colour: black EAN 4262483960059 Manufacturer no. FLOW110BLACK Manufactured in China Series Flow Design Midi tower Mainboard form factor ATX Material Tempered glass, steel Window kit Yes Mesh front Yes Internal dimensions Maximum plug-in card length 380 mm Supported radiators Front: 120/140/240/280/360 mm, top: 120/140/240/280/360 mm, rear: 120/140 mm Drive bays 3.5-inch internal 2 pieces Full-size slots 7 Front connections 2x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s) Front 3 x 120 mm ARGB fans with hydro bearings pre-installed, alternatively 2 x 140 mm fans can be installed Rear 1 x 120 mm ARGB fan with hydro bearings pre-installed, alternatively 1 x 140 mm fan can be installed Notes Lighting can be controlled directly via the motherboard using 3-pin A-RGB, the speed can be regulated via a 4-pin connection using PWM and/or voltage via the motherboard, cover: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed. Lighting Yes, RGB RGB connections Addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Rear connection of the motherboard No Further information The high-quality real glass side window made of tempered glass allows you to see inside your case so you can always keep an eye on your stylish PC components. To round off the design, we have designed the space for the power supply as a closed chamber. This creates a visually minimalist and discreet system in which great PC systems can be realised. The mesh front panel allows an unobstructed view of the RGB fans. Volume 51 l Dimensions Width: 23 cm x Height: 47.6 cm x Depth/Length: 47 cm
The SilverStone SST-RM45-360 is a 4U rackmount server chassis with enhanced liquid cooling compatibility. The chassis supports motherboards up to the SSI-EEB standard, 360 mm water cooling radiators, and 8 PCI expansion slots. The chassis features a USB Type-C interface and adaptability for upright or horizontal placement. Type Rack Enclosure Color black EAN 4710679818191 Manufacturer No. SST-RM45-360 Server tower design Mainboard form factor E-ATX, SSI-CEB, SSI-EEB Material steel, 1.0mm ~ 1.2mm Internal dimensions Plug-in card length maximum 340 mm Supported radiators front: 120/240/360 mm. 3.5 inch internal drive bays 8 pieces Slots Full-Size 8 pieces Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 1 (5 Gbit/s) 3 x 120 mm fans can be installed on the front Rear 2 x 80 mm fans included Notes LED indicators: Power LED x 1: Blue, HDD access x 1: Green, LAN LED x 2: Green. Water cooling possible Yes Rear connection of the mainboard No Additional Information: An internal USB 3 Type-C cable with a total length of 80 cm is included. When connecting external storage devices, it is advisable to avoid using cables that are too long, as excessive cable length may potentially result in a reduction in transfer speed. Note: The total length of 5.25-inch devices and the motherboard is 481 mm. Refer to the manual for a detailed description of the various form factor tolerances of the motherboard if 5.25-inch devices are to be installed within this limitation. Accessories available Accessory box Volume 39 l Dimensions Width: 43.8 cm x Height: 17.6 cm x Depth/Length: 50 cm Weight 10.4 kg
Our Silentware View A-RGB combines modern glass optics with ample space for high-end systems and impressive airflow, ensuring that your hardware is kept cool at all times. To achieve this, we have pre-installed three 120 mm reverse airflow fans and a conventional 120 mm case fan with A-RGB lighting and high-quality HDB bearings. The air intake on the front right of the Silentware View is slightly angled to direct the flow of fresh air to the graphics card and CPU cooler as quickly as possible, despite the glass front panel. The newly developed case body naturally has all the necessary cable grommets for systems based on ASUS BTF, MSI Project Zero and similar hardware, making it particularly future-proof. For systems with conventional cable routing, there are (partly rubberised) cable grommets for the motherboard, GPU, CPU and fan power supply, as well as ample space for cable management. With space for graphics cards up to 410 millimetres long and CPU coolers up to 160 millimetres high, the case is perfect for high-end hardware. Stylish showcase systems are therefore particularly easy to implement with the Silentware View. Ambitious buyers, on the other hand, have the option of implementing complex custom loop water cooling systems with up to 2x 360mm, 1x 280mm and 1x 120mm radiators. Type Tower case Colour: black EAN 4262483960127 Manufacturer no. VIEWBLACK Manufactured in China Series View Design Midi tower Mainboard form factor ATX Material Tempered glass, steel Window kit Yes Internal dimensions Maximum plug-in card length 410 mm Supported radiators Side: 120/240/280 mm, Top: 120/240/280/360 mm, Bottom: 120/240/280/360 mm, Rear: 120 mm Drive bays 3.5-inch internal 1 piece Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 1 (5 Gbit/s) Rear 1 x 120 mm ARGB fan with hydro bearing pre-installed Notes Side: 3 x 120 mm ARGB fans with hydro bearings pre-installed, Top: 3 x 120 mm fans can be installed, Bottom: 3 x 120 mm fans can be installed Lighting Yes, RGB RGB connections Addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Rear connection of the motherboard Yes Feature lighting can be controlled directly via the motherboard using a 3-pin A-RGB connector, while the speed can be regulated via a 4-pin connector using PWM and/or DC via the motherboard Further information The high-quality real glass front panel and side window made of tempered glass allow you to see inside your case so you can keep an eye on your stylish PC components at all times. The power supply chamber is located behind the motherboard tray. This is also where 2.5-inch SSDs and hard drives are installed. The visual focus of the build is therefore on the graphics card, motherboard and cooling. Volume 50 l Dimensions Width: 28.5 cm x Height: 41.5 cm x Depth/Length: 42.5 cm
Tootjainfo: http://kolink.eu/Home/case-1/midi-tower-2/void.html Mõõtmed: 190 x 430 x 400 mm (L x K x S) Materjal: Teras, karastatud klaas, plastik Kaal: umbes 5,9 kg Värv: Must Kujutegur: ATX, Micro-ATX, Mini-ITX Võimalikke fänne kokku: 3x 120 mm (ees) 2x 120 mm (katus) 1x 120 mm (taga) Eelinstallitud: 1x 120 mm (taga) Radiaatori kinnitus: 1x 240 mm (ees) Filter: Katus, põhi Sõidupesad: 2x 3,5 / 2,5 “(sisemine) 2x 2,5 “(sisemine) PSU: 1x tavaline ATX (valikuline) Laienduspesad: 7 I / O-paneel: 2x USB 2.0 (sisemine ühendus) 2x USB 3.0 (sisemine ühendus) 1x heli sisse / välja RGB / lähtestamise lüliti GPU maksimaalne pikkus: 310 mm Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU pikkus: 180 mm
Internal 6x 2.5 "/3.5", 2x 2.5 ", 8x 2.5" /3.5 "(optional), 2x 2.5" (optional), Front I / O 1x USB-C 3.1 (20-pin Key-A header), 2x USB-A 3.0, 1x microphone, 1x headphones, PCI slots 9 (2x riser card), Fan (front) 2x 140mm, 1000rpm, 18.9dB (A) or 3x 140mm (optional), Fan (rear) 1x 140mm, 1000rpm, 18.9dB (A), Fan (top) 3x 140mm (optional), Fan (other) 2x 140mm (optional), Radiator sizes 120/140/240/280 / 360mm in front, 120/140/240/280/360 / 420mm above, 120/140/240 / 280mm below, 120mm in the back, Mainboard up to ATX (285mm wide), Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6") / E-ATX (12 "x11.2"), Power supply ATX (max. 250mm deep), PSU position below, CPU cooler max. 185mm height Graphics cards max. 315mm (491mm without HDD cage without front fan, 467mm without HDD cage with front fan), Color anthracite, inside anthracite, Lighting without lighting, Dimensions (WxHxD) 240x475x541mm, Volume 61.67l, Weight 10.50kg, Enclosure type miditower, Special features Cable management, dust filter, integrated fan control, window made of glass Note Mainboard and case manufacturers refer to different dimensions as E-ATX. Mainboards with E-ATX / SSI EEB dimensions of 305x330mm or 12 "x13" are not supported, w/o psu, FD-C-MES2A-04
Optimized Airflow Design RGB Fusion with ARGB Connector Hub Support Motherboards up to E-ATX Up to 360mm Liquid Cooling Compatible Support Vertical GPU Installation Full-Size Tempered Glass Side Panel With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel Pre-installed 4 ARGB fans C301 GLASS CPU Height : 170mm GPU Length : 400mm PSU Length : 180mm, MidiTower PSU Not included, Front : 120mm x3 (ARGB); Rear : 120mm x1 (ARGB) Dimensions H=486 W=220 D=473 mm
XPG INVADER X MID-TOWER CHASSIS INVADER X showcases your build's components and vibrant RGB lighting through bezel-less tempered glass panels. Its sleek design offers convenient visibility, while the magnetic dust filter ensures easy maintenance.
The CORSAIR 3500X ARGB mid-tower chassis is designed for enthusiasts seeking a blend of performance and aesthetics. With its versatile cooling options, it supports multiple fan and radiator configurations to ensure your components stay cool under load. The elegant design features tempered-glass panels on the side and front, complemented by comprehensive dust filtration, to showcase your build while keeping it clean. The spacious interior accommodates large video cards and CPU coolers, making it compatible with a wide range of hardware. Enhanced connectivity options on the front panel, including USB-C 3.2 Gen 2 and USB 3.2 Gen 1 ports, provide easy access to your devices. Additionally, its support for various motherboard form factors from Mini-ITX to Extended ATX allows for flexible build configurations, making the CORSAIR 3500X ARGB a smart choice for gamers and professionals alike.
Elegantes und vielseitiges mATX-Gehäuse, geschlossene Front für Silent-Builds, Seitenteil aus Temperglas, bis zu 8 Lüfter und 3 Radiatoren möglich, für GPUs mit max. 400 mm Länge, versetzbares Netzteil für optimale Raumaufteilung
