Koos keskselt paigutatud USB 3.0 Type A ja USB 3.0 Type C ühendustega, SDXC kaardilugeja ja heliühendustega on MW-02 II praktiline ja kaasaegne. Pesa õhukeste DVD-draivide jaoks täiendab seadmete valikut. Perforeeritud külgseinad ...
Modular big tower with 3 configurations, tempered glass side panels, supports graphics cards up to 423 mm, suitable for two large radiators, aluminum exterior panels, up to nine fans, 1x USB-C and 2x USB 3.0.
Full mesh construction on the front ensures optimal ventilation The sense of unity between the front mesh and the tempered glass on the side panel creates a unique Zalman design. Exceptional airflow Designed for optimal air intake with a full mesh front panel and pre-installed addressable RGB fans allows for optimal and maximum airflow. High performance addressable RGB fan The mesh front panel and RGB fans provide optimal airflow and stunning RGB lighting effects (supports up to 8 fans). ARGB controller Press the LED I/O button to change the LED pattern and color (26 patterns) Press and hold the LED button for 3 seconds to sync the motherboard after the white light flashes once Press and hold the LED button for 6 seconds to turn off the LED after the white light flashes twice Press the LED button again to disconnect the motherboard sync and change the controller mode Magnetic dust filter Protects components and ensures unobstructed airflow by filtering dust. Bottom dust filter Protects the power supply from dust accumulation. Easy-to-use hinged glass side panel A hinged glass panel provides easy access to the interior.
The DIGITUS wall-mounted data communications cabinet is equipped with a glazed door and a cable gland in the roof and floor. The steel structure is made of steel sheet up to 1.5 mm thick. It is possible to change the side of the door hinges and adjust the depth. The rack cabinets are delivered unassembled, in a flat package. Assembly takes place in a few simple steps thanks to the included step-by-step instructions. Installation cabinet supplied unassembled Quick installation Door opening angle: 200° 1-point locking on front door 483 mm (19") rack profiles mounted at the front inside the cabinet, galvanized 483 mm (19") rack profiles with depth adjustment 1.1-1.5 thick, high-strength sheet steel, powder-coated Cable inlet with brush strip in the roof and plastic cover in the floor Ventilation slots for active and passive air supply and exhaust Front door: glass, single Side panels: on two sides Assembled: no
Wall-mountable showcase case, ATX form factor, designed for custom water cooling, vertical GPU mounting, radiator up to 360 mm, graphics cards up to 400 mm in length.
Minimalist mini-tower, includes one Mercury AM120S fan, supports up to five fans, accommodates GPUs up to 340 mm / CPUs up to 162 mm in height, supports up to three drives, radiator up to 240 mm, 1x USB-C / 2x USB-A
The DIGITUS wall-mounted data communications cabinet is equipped with a glazed door and a cable gland in the roof and floor. The steel structure is made of steel sheet up to 1.5 mm thick. It is possible to change the side of the door hinges and adjust the depth. The rack cabinets are delivered unassembled, in a flat package. Assembly is carried out in a few simple steps thanks to the enclosed "step-by-step" instructions. Installation cabinet supplied unassembled Quick installation Door opening angle: 200° 1-point locking on front door 483 mm (19") rack profiles mounted at the front inside the cabinet, galvanized 483 mm (19") rack profiles with depth adjustment 1.1-1.5 thick, high-strength sheet steel, powder-coated Cable inlet with brush strip in the roof and plastic cover in the floor Ventilation slots for active and passive air supply and exhaust Front door: glass, single Side panels: on two sides Assembled: no
White case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Space for graphics cards up to 460 mm and CPUs with a height of up to 170 mm Installation of up to nine SSDs provides extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that impresses not only with its variety of hardware possibilities but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to earn true admiration. With the LUCA L70, you are perfectly equipped to build your gaming PC exactly the way you want. This midi-tower not only offers you more than enough space to cool your hardware, but it can also be easily disassembled and reassembled. Building your high-end system has never been so easy! Comprehensive cooling options for your new build When you assemble your own PC, cooling is one of the most important points to consider. The LUCA L70 allows you to install up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that in this configuration, the power supply must be mounted on the top of the case. If you prefer to mount the PSU at the bottom, three fans can be installed on the top, and only one on the bottom. Water cooling enthusiasts won't be disappointed either: radiators up to 420 mm can be installed in several places. If the PSU is mounted on the top, you can fit a radiator up to 240 mm there and up to 360 mm at the bottom. If the PSU is mounted at the bottom, there is room for a 420 mm radiator on both the top and the side. To prevent dust from accumulating unnecessarily inside the case, there are dust filters on the top and the bottom. This ensures significantly longer hardware lifespan and saves you time and annoying cleaning. Thanks to the numerous options for installing fans and radiators, efficient cooling is guaranteed, ensuring your high-end hardware always operates at peak performance. Additionally, the tower stands 4 mm off the ground on X-shaped legs, further improving airflow. Case for powerful hardware To ensure even the most demanding games run smoothly on high settings, the LUCA L70 supports powerful graphics cards up to 460 mm in length. An included GPU bracket ensures the card doesn't suffer due to gravity. Vertical installation of the graphics card is also possible, but the necessary accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX and up to 280 mm wide. To avoid messy cabling, motherboards with rear connectors are also supported when the PSU is in the top position, but only in ATX or Micro-ATX format. The CPU height should not exceed 170 mm, while the power supply should be a maximum of 190 mm long. To ensure enough storage for your programs and games, up to nine 2.5-inch drives can be mounted on the side in the LUCA L70. Toolless assembly and disassembly To make installing and swapping your hardware as easy as possible, the LUCA L70 is designed to be completely modular. The front, side, and other parts can be removed and reassembled without additional tools. The motherboard tray can also be repositioned, allowing you to install the motherboard, CPU, and CPU cooler independently of each other.
