Elegant Micro-ATX case by Jonsbo in black, subtle design made of steel, with tempered glass side panel, supports graphics cards up to 330 mm, up to 7x 120 mm fans possible
Midi-Tower PC case, tempered glass side panel, mesh front, 5x Kolink Umbra ARGB PWM fans, supports GPUs up to 330 mm, power supply cover, compatible with ATX motherboards
Well-equipped Midi-Tower, front and side panel made of Tempered Glass, left side panel and top with ventilation slots, space for up to 9x 120mm or 6x 140mm fans, GPU length up to 420mm, ARGB strip on the front, up to two power supplies possible
CTE T500 TG ARGB Snow Full Tower Chassis The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support up to a 420mm AIO radiator at the front and a maximum 360mm AIO radiator at the rear. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE T500 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE T500 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. Experience the perfect combination of design and performance with our CTE T500 The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support a maximum of a 420mm AIO radiator at the front and a maximum of two 360mm AIO radiators at the front and rear. There's plenty of room to install cooling components, including front and rear fan brackets, top and right fan vents, bottom fan vent, and shroud vent, and the case can accommodate up to eleven 140mm/120mm fans. Other cool details include removable filters, pump and tank support, and Velcro straps for easy cable management. Our CTE T500 Snow is the perfect choice whether you're looking for a custom liquid cooling setup or a dual AIO setup! Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE T500 TG ARGB's versatile interior features two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Support for dual 360mm radiators Our CTE T500 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, allowing users to install up to two 360mm radiators simultaneously at the front and rear. To ensure AIO compatibility, users can install up to one 420mm AIO radiator on the front and up to two 360mm AIO radiator on the front and rear. All your dream cooling components will fit! The CTE T500 Full Tower case has a huge fan and cooler installation capacity: up to eleven 140 mm/120 mm fans and 360 mm AIO coolers in various locations (420 mm AIO cooler at the front). Moreover, equipped front and rear fan brackets and mounting locations on the top, right side and lid ensure easy installation of all desired cooling components. Rock your world with three pre-installed white 140mm CT140 ARGB fans The CTE T500 TG ARGB Snow Full Tower case is equipped with three white 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. We've tested everything, so you don't have to At Thermaltake, we always stress test our products under harsh conditions to ensure product quality. CTE T500 TG ARGB Snow Full Tower Chassis products have been tested at 100% full load for 30 minutes, with the highest-end CPU, GPU and motherboard at the time of testing, compared to a consumer-style configuration, which allowed us to test how the chassis handles in real-world situations.
Tootekood: Z9 Iceberg MS WhiteGTIN: 8809213765216Korpused
Zalman Z9 Iceberg MS ATX Case - White, Tempered Glass The Zalman Z9 Iceberg MS ATX case in stylish white brings together modern design and innovative functions for PC enthusiasts and gamers. With the high-quality tempered glass side window, this case offers a perfect presentation of the installed hardware and allows RGB components to be shown off to their best advantage. This versatile midi tower case supports ATX, Micro-ATX and Mini-ITX motherboards , making it suitable for a wide range of PC builds. Thanks to the sophisticated airflow structure with generous ventilation openings and the option to install up to 6 fans , the system remains optimally cooled even during intensive use. In addition, integrated dust filters protect the hardware and ensure a clean interior. The case's I/O panel offers practical ports such as USB 3.0, USB 2.0 and HD Audio , which increase convenience and connectivity. With its minimalist, elegant design in white, the Zalman Z9 Iceberg blends seamlessly into any environment and is guaranteed to be an eye-catcher. Main features of the Zalman Z9 Iceberg MS ATX case in white: Elegant tempered glass side window for best hardware visibility Support for ATX, Micro-ATX and Mini-ITX motherboards Maximum cooling with space for up to 6 fans Integrated dust filters for a clean interior Stylish white design for a modern look Choose the Zalman Z9 Iceberg MS ATX case in white if you value style and performance. Ideal for gamers, PC builders and anyone looking for an aesthetic and powerful solution!
Versatile midi-tower, front and side panel made of tempered glass, large mesh areas on the left side panel and lid, 2x 140mm & 1x 120mm ARGB PWM fans pre-installed, GPU length of up to 420mm, CPU cooler height up to 175mm
Tootekood: HERITAGE PRO (W)GTIN: 4710562749175Korpused
Compact Midi-Tower with stylish designNine fans ensure efficient airflow, four 120-mm fans already installedSupport for motherboards up to Micro-ATXSpace for graphics cards up to 370 mm and CPU coolers with a height of up to 170 mmPractical carrying handle for transportThe Montech HERITAGE PRO: Stylish Midi-Tower with ample spaceThe Montech HERITAGE PRO is a Midi-Tower that stands out at first glance with its design. It offers you more than enough space to install your high-end components. Fans ensure very good airflow, which efficiently cools your hardware. Additionally, the tower can even be transported with the practical carrying handle.Efficiently cooled with fans and radiatorsEffective cooling is the most important thing in a high-end PC. That's why up to nine fans can be installed in the Montech HERITAGE PRO. The top can accommodate either three 120 mm fans or two 140 mm fans, while the bottom can accommodate three more 120 mm fans. The back also supports a 120 mm fan, as well as two 120 mm fans on the side. This ensures that your hardware stays cool even in performance-intensive games.For the installation of a custom water cooling system, a radiator up to 360 mm can be installed on the top.Space for your high-end hardwareThe Midi-Tower supports the installation of graphics cards up to a size of 370 mm. Motherboards up to the Micro-ATX format can be accommodated.The CPU cooler should not exceed a height of 170 mm. For storing programs and games, two 2.5-inch drives or one 3.5-inch drive can be installed.
Obudowa do konstruowania wydajnych komputerów mid tower iCUE LINK 5000T LX RGB Przyciągnij uwagę za pomocą wyjątkowej profilowanej konstrukcji obudowy CORSAIR 5000T LX RGB, w której możesz zbudować idealny system oparty na płycie głównej z odwróconymi złączami. Elegancka stalowa obudowa o wyjątkowym kształcie 3 wentylatory LX120 RGB i koncentrator systemowy iCUE LINK w komplecie Zintegrowane taśmy świetlne RGB Aurora zapewniające rozproszone oświetlenie Działa z płytami głównymi z odwróconymi złączami Zdejmowane panele przedni i górny z siateczki umożliwiające intensywny obieg powietrza Mieści do 10 wentylatorów 120 mm lub 4 wentylatorów 140 mm oraz kilka radiatorów 360 mm System organizacji okablowania RapidRoute EFEKTOWNE LINIETa elegancka obudowa o wyjątkowym kształcie z taśmami świetlnymi iCUE LINK Aurora i wentylatorami iCUE LINK LX120 RGB zapewnia wyraziste i dynamiczne podświetlenie pozwalające podziwiać jej uderzające piękno. OGROMNY POTENCJAŁ CHŁODZENIAPrzestronne wnętrze pomieści nawet 10 wentylatorów 120 mm albo 4 wentylatory 140 mm, a także kilka radiatorów o wysokości 60 mm, w tym z przodu lub boku - o rozmiarze 360 mm oraz w górnej części - o rozmiarze 360 mm w konfiguracji push/pull. PEŁNA FUNKCJONALNOŚĆTa obudowa ma wszystko, czego potrzeba do budowy bardzo wydajnego komputera. ZDEJMOWANE PANELE PRZEDNI I GÓRNYSiateczkowe panele o wyjątkowej konstrukcji, które można łatwo zdjąć, aby dostać się do środka, umożliwiają intensywny przepływ powietrza. DWA OBSŁUGIWANE BEZNARZĘDZIOWO PANELE BOCZNE NA ZAWIASACHŁatwy dostęp do systemu dzięki panelom na zawiasach: jednemu ze szkła hartowanego, eksponującemu wszystkie komponenty, oraz jednemu ze stali z drugiej strony. SYSTEM PROWADZENIA PRZEWODÓW CORSAIR RAPIDROUTEUmożliwia szybkie i łatwe poprowadzenie przewodów przez obszerny 46-milimetrowy ukryty kanał pod płytą główną. OBSŁUGA PŁYT GŁÓWNYCH Z ODWROTNYMI ZŁĄCZAMISprawdzona pod kątem zgodności z płytami głównymi ASUS BTF, MSI Project Zero oraz Gigabyte Project Stealth, które mają złącza z tyłu, dzięki czemu nie psują widoku przez podłączone kable. PROSTA KONSTRUKCJANowoczesna konstrukcja w popularnym formacie obudowy komputerowej 5000T ma wygodne rozwiązania, które ułatwią Ci pracę. PUDEŁKO NA ŚRUBY WIELOKROTNEGO UŻYTKUDzięki dodanemu w zestawie pudełku, w którym wszystkie potrzebne Ci śruby będą bezpiecznie zamknięte, nie zgubisz już żadnej ważnej śrubki. PRZELOTKI FORMOWANE W DWÓCH CYKLACHDzięki miękkim, gumowym przelotkom wewnętrznym umożliwiającym łatwe przeciąganie kabli oraz twardym gumowym przelotkom zewnętrznym, które pewnie trzymają się na miejscu, możesz uniknąć frustracji podczas instalowania przewodów. ŚRUBY QUICKTURN DO WENTYLATORÓWŚruby do wentylatorów CORSAIR QuikTurn są równie wytrzymałe i bezpieczne jak tradycyjne śruby, dzięki czemu montaż wentylatorów w systemie staje się niezwykle prosty. Przydaje się to, gdy wypełniasz obudowę tej wielkości. WIELE MOŻLIWOŚCI CHŁODZENIAStwórz odpowiedni do swoich potrzeb system chłodzenia dzięki miejscu na 10 wentylatorów 120 mm oraz różnorodnym opcjom montażu dwóch radiatorów o maksymalnym rozmiarze 360 mm. NOWOCZESNY PANEL WEJŚĆ/WYJŚĆ Z PRZODUUmożliwia łatwy dostęp do nowoczesnych złączy, w tym do portu USB 3.2 Gen 2 Type-C, 4 portów USB 3.2 Gen 1 Type-A oraz zintegrowanego gniazda audio i mikrofonowego typu jack.
Darkflash DY470 computer case (black) + 4 fans + GPU bracketThe Darkflash DY470 case will allow you to build a computer that will surprise you with its performance and stylish, modern design. Its transparent panels allow you to expose the components of your choice, and support for ATX, Micro ATX and ITX motherboards, various types of graphics cards and other components means that everyone can create a configuration perfectly suited to their needs. The set includes four reliable fans, taking care of optimal performance, and a GPU bracket to protect the graphics card.Four fans for better performanceAdequate cooling of your computer is essential, which is why the Darkflash DY470 kit comes with 4 reliable DM12 Pro fans (3 on the side, 1 on the back). The fans reach speeds of up to 1600 RPM, and offer up to 20 different ARGB lighting effects. Their operation is extremely quiet (27.5 dB), so you won't disturb your household members, even during the most intense computer games. The fans feature 4Pin PWM and 5V3Pin A-RGB connectors, and are also compatible with ASUS AURA SYNC (5V), which means they automatically adjust their operation according to the temperature of your computer.Various expansion optionsThe DY470 offers an extremely spacious interior, allowing for easy expansion and installation of the components of your choice. It allows you to install a graphics card of up to 410 mm (horizontally) or up to 390 mm (vertically, with an optional PCIE4.0 cable), as well as a CPU cooler of up to 175 mm in height and a power supply of up to 200 mm. You can also accommodate two HDDs or one SSD, so you can easily provide space for your photos, videos, games or documents.Reliable coolingThe case provides extensive cooling capabilities, making it perfect for even the most demanding configurations. It allows the installation of up to 10 120 mm fans, so you can easily ensure effective air circulation and adequate temperature inside. However, that's not all. DY470 allows the installation of two 360 mm water coolers, which guarantees efficient, stable operation of the computer even under heavy load.Support for ATX motherboards with back-connect systemThe Darkflash DY470 case is compatible with ATX motherboards with a back-connect system that allows most cables to be hidden. This space organization ensures a neat interior look, and also makes cable management easier. Forget about unsightly cables visible by the front panel!Full protection of componentsThe case is equipped with full dust protection. This makes it easy to keep it in perfect condition - don't worry about it getting dirty quickly! What's more, the removable system prevents dirt accumulation and is very easy to clean. The GPU holder is also included, which takes care of the maximum safety of your graphics card. Together with it, you will avoid the risk of bending the card, as well as improve the stability of its installation, protect it from mechanical damage and increase the aesthetics of the case interior. All this use affects the stability of operation and longevity of components.Ports you needOn the front of the case you will find numerous connectors that will facilitate your daily work with the computer. You'll have a microphone input, a headphone jack, two USB 3.0 ports and one USB-C 3.2 port for fast charging and file transfer. So you can conveniently use your peripherals of choice!IncludedDarkflash DY470 enclosureDM12 Pro ARGB x4 fanGPU holderuser manual ManufacturerDarkflashModelDY470Housing typeBig TowerSide panelTempered glassMotherboard standardATX / Micro ATX / ITXPower supply standardIn the bottom, 200 mmSlots for internal drives3.5" HDD x2 / 2.5" SSD x1Expansion card slots7 (optional PCIE4.0 vertical cable)Max power supply length200 mmMax length of graphics cardHorizontal mounting: 410 mm; Vertical mounting: 390 mm;Max CPU cooler height175 mmMax number of fans10Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm; Side: 3x 120 mm; Bottom: 3x 120 mm;Water cooling mounting optionsRear: 120 mm; Top: 360 mm; Side: 360 mm;Number of fans installed4Type of fansDM12 Pro ARGBButtons and controlsPower, RestConnectorsUSB 3.0 x 2, USB-C x 1, HD AudioMaterial0.7 mm SPCCColorBlackHeight497 mmWidth298 mmDepth473 mm
