Korpused

Fortron korpus M580-BP (must, Tempered Glass)

Thermaltake korpus The Tower 600 piparmündiroheline Strawberry

Thermaltake korpus View 600 TG Mint Strawberry (mint/beere, Tempered Glass)

The Phanteks XT M3 impresses with a space-saving design that provides you with more than enough room for high-end components. Thanks to effective cooling and neat cable management, this case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact Size: Space-saving case for high-end hardware Effective Cooling: Room for up to nine fans Large Radiator: Installation of a 360 mm radiator at the top is possible Tidy Build: Space for clean cable management Back-Connect Support: Supports motherboards with a back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SF case built for greatness. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360 mm radiator can be fitted at the top if you prefer water cooling. Besides fans and a radiator, the mesh on the front also ensures very good airflow, so less hot air accumulates in your case. Your new gaming PC with clean cable management Laying cables neatly isn’t easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also allows for better air circulation. Mini-ITX case built for powerful hardware Even a large graphics card is no problem—the case offers space for a GPU up to 430 mm in length. Note that if you use the maximum length, you cannot install fans at the front. The CPU cooler should not exceed a height of 175 mm, and the power supply should be no longer than 150 mm.

Zalman korpus PC case I3 NEO V2 Mid Tower ARGB fan x4 valge

Darkflash DB330M Mesh computer case (black)Darkflash DB330M Mesh is a computer case designed for M-ATX and ITX standard motherboards. Its dimensions (368 × 218 × 400 mm) allow the construction of a compact set-up with a graphics card up to 305 mm long and CPU cooling up to 180 mm high. The design is based on a 0.5 mm SPCC steel frame and features a tempered glass panel and mesh front for efficient air or liquid cooling.Efficient air coolingThe Darkflash DB330M Mesh case supports up to 7 fans: 2 at the front, 2 at the bottom, 2 at the top and one at the rear. The top part of the design allows for the installation of fans in 120 or 140 mm sizes, while the remaining locations are provided for 120 mm fans only. This arrangement allows for the creation of a vertical cooling channel that promotes natural air circulation and efficiently dissipates heat from components.240 mm liquid coolingThe Darkflash DB330M Mesh allows you to mount a water cooler of up to 240 mm in the top. This allows you to install a high-performance AIO system without sacrificing other components. The maximum height of the air cooler is 180 mm.Mesh panel with filterThe front panel of the case is made of mesh, which improves airflow and also acts as a dust filter. Additional vents are also located on the top and bottom of the design.Space for longer GPUsA graphics card up to 305 mm in length can be mounted inside. The chassis offers 4 PCI slots, making it possible to mount two- and three-slot cards. The power supply compartment and cable space do not limit the length of the GPU.Glass side panelThe left panel is made of tempered glass to expose the computer's interior and components with RGB backlighting. The panel can be easily removed without tools.Separate space for cables and multiple portsThe back of the case features a contoured space and pass-through holes for orderly cable routing. This layout makes it easier to install components and improves airflow in the main compartment. The front panel features a USB 3.0 port, 2 USB 2.0 ports, one HD Audio port and a power button. This allows you to enjoy quick access to basic functions without having to reach the back of the case.ATX power supply compatibility and board supportThe bottom of the case has room for a standard ATX power supply. This makes it possible to mount full-power units without the space constraints typical of smaller enclosures. In addition, the Darkflash DB330M Mesh supports M-ATX and ITX motherboards, offering optimal conditions for building a home, office or gaming PC. The lack of pre-installed fans allows for individual selection of cooling components. ManufacturerDarkflashModelDB330M Mesh BlackHousing typeMidi TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardAt the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x1Expansion card slots4Max PSU length210 mmMax length of graphics card305 mmMax height of CPU cooler180 mmMax number of fans7Fan mounting optionsTop: 120 mm x2 / 140 mm x2; Bottom: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1Water cooling mounting optionsTop: 240 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPowerConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight400 mmWidth218 mmDepth368 mmWeight3.8 kg

With the D32 series, Jonsbo targets anyone wanting to build their PC in a space-saving manner. Unlike the D32 STD, the D32 PRO PC case offers special and practical features like Back-Connect or improved front I/O, making it aimed at the high-end segment. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for Back-Connect motherboards Mesh side panel for a subtle appearance Plenty of space for cooling solutions, allowing for high-performance hardware installation Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Mesh: Space-saving and subtle case for high-end hardware Whether midrange HTPC or high-end PC – the D32 PRO Mesh from Jonsbo comfortably fits a variety of build types. This minimal case accommodates graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In Back-Connect mode, the maximum CPU cooler height is reduced by just under seven millimeters. This means that even with the compact design of the case, adequate cooling for your hardware is ensured. Combined with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the case provides enormous airflow inside. No cable clutter with Back-Connect With Back-Connect motherboards, such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case in B-mode with around six to seven millimeters additional space is almost completely free of visible cable clutter. Because most power and connection cables can be routed to the back of the motherboard, cable management is no longer necessary, and you still get a clean look inside your case. Powerful cooling in a compact space So your high-performance hardware stays adequately cooled in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware will remain cool even under load. Three dust filters on the front, top, and bottom ensure your hardware stays free from dust and dirt. As a result, your temperatures will always be at optimal levels, and the lifespan of your hardware will be extended.

Aerocool korpus P500A-BK-v1 (must, Tempered Glass x 2)