LANCOOL III Mid-tower modular chassis for all kinds of configurations Equipped with 4 × 140 PWM fans (ARGB or non-RGB) Featured airflow optimized mesh structure and hinged side panels Supports up to 420 radiator or 3 x 360 radiators and a maximum of 10 fans Offers 12 storage drives mounting locations Upgraded cable management solution for a clean build
The Phanteks XT M3 impresses with a space-saving design that provides you with more than enough room for high-end components. Thanks to effective cooling and neat cable management, this case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact Size: Space-saving case for high-end hardware Effective Cooling: Room for up to nine fans Large Radiator: Installation of a 360 mm radiator at the top is possible Tidy Build: Space for clean cable management Back-Connect Support: Supports motherboards with a back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SF case built for greatness. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360 mm radiator can be fitted at the top if you prefer water cooling. Besides fans and a radiator, the mesh on the front also ensures very good airflow, so less hot air accumulates in your case. Your new gaming PC with clean cable management Laying cables neatly isn’t easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also allows for better air circulation. Mini-ITX case built for powerful hardware Even a large graphics card is no problem—the case offers space for a GPU up to 430 mm in length. Note that if you use the maximum length, you cannot install fans at the front. The CPU cooler should not exceed a height of 175 mm, and the power supply should be no longer than 150 mm.
The Phanteks XT M3 impresses with a space-saving design that offers you more than enough room for high-end components. With effective cooling and tidy cable management, the case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact size: Space-saving case for high-end hardware Effective cooling: Space for up to nine fans Large radiator: Supports installation of a 360 mm radiator on the top Tidy build: Room for excellent cable management Back-connect support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini-case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SFF case built for big things. Compatible with high-end graphics cards and motherboards supporting back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports the installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360-mm radiator can be fitted on top if you prefer water cooling. Besides fans and a radiator, the mesh front also ensures very good airflow. This helps prevent hot air from accumulating inside your case. Your new gaming PC with clean cable management Managing cables neatly is not easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also improves airflow. Mini-ITX case built for powerful hardware Even a large graphics card fits in effortlessly—the case offers space for a GPU up to 430 mm in length. Note that you cannot install fans at the front if you use the maximum GPU length. The CPU cooler should not exceed a height of 175 mm, and the power supply should not be longer than 150 mm.
Midi tower with airflow optimization, mesh front, compatible up to E-ATX, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels, three pre-installed fans The HAVN BF 360 Flow is ideal for gamers and hardware enthusiasts who demand no compromises: solid cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUThree pre-installed fans: 2x 180 mm & 1x 140 mmCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm space – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360 FlowHAVN BF 360 Flow: Airflow meets styleThe front features a distinctive ribbed mesh that draws in air precisely and reduces flow loss. An integrated guide with a 135° angle directs fresh airflow straight onto the GPU and CPU – providing maximum cooling without heat buildup. Flexible mounts for fans or radiators are included, supporting both air and water cooling solutions.HAVN BF 360 Flow side viewCooling power for your high-end hardwareUp to six fans can be installed. The three pre-installed fans deliver plenty of fresh air right out of the box. Alternatively, radiators up to 360 mm can be mounted at the front and top. With a CPU cooler height of 195 mm and a spacious interior, there’s ample room for large air coolers or custom water cooling loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation, even at peak performance.HAVN BF 360 Flow rear side viewCompatibility without compromiseThe BF 360 offers enough space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm clearance for graphics cards – perfect for current RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restriction. Two modular drive trays can accommodate either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 Flow rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you benefit from pre-routed cables, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grips and a practical pull tab – maintenance and upgrades have never been easier.HAVN BF 360 Flow I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re well equipped for the future, whether you’re gaming or working.
Antec P30 AIR. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Placering af strømforsyning: Bund. Frontventiler installeret: 2x 140 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 222 mm, Dybde: 478 mm, Højde: 465 mm
Mit seinem stilvollen Stoffüberzug unter dem Seitenteil und der Front aus gehärtetem Glas, verleiht das AK7 ARGB deiner Gaming-Hardware eine besonders elegante Note. Mit vier vorinstallierten ARGB-Lüftern und einem durchdachten Lufteinzug über die Seite ist neben der Optik auch für einen jederzeit berauschenden Airflow gesorgt. Das ATX-Gehäuse bietet zudem moderne Anschlüsse, eine breite Kompatibilität mit BTF-Mainboards und jede Menge Platz für leistungsstarke Technik. Das AK7 ARGB setzt mit einer modernen Glasoptik Hardware perfekt in Szene. Ein besonders edler Touch wird ihm zusätzlich durch den stilvollen Stoffüberzug an der Unterseite verliehen. Im AK7 ARGB sind bereits vier 120-mm-ARGB-PWM-Lüfter verbaut, von denen drei invertiert sind, um die Luft von der Seite ins Gehäuse zu saugen und so für einen optimalen Airflow zu sorgen. Das Gehäuse bietet dabei Platz für insgesamt bis zu neun Lüfter. Wer sein AK7 ARGB mit einer Wasserkühlung betreiben möchte, kann dies selbstverständlich tun und neben einem 360-mm-Radiator sogar einen weiteren Radiator von bis zu 280 mm unterbringen. Das AK7 ARGB ist nicht nur mit herkömmlichen Mini-ITX-, Micro-ATX- und ATX-Mainboards kompatibel, sondern unterstützt auch nahezu alle BTF-Formate. Für eine breite Anschlussvielfalt sorgt das AK7 ARGB mit modernen TRRS- und USB-C-Anschlüssen. Eine RGB-Steuerung ermöglicht zudem den Anschluss von bis zu vier LED-Elementen und vier PWM-Lüftern. Mit einer maximalen Grafikkartenlänge von 410 mm bietet das AK7 ARGB auch Platz für große Karten, die durch einen gummierten Grafikkartenhalter zusätzlich gestützt werden. CPU-Kühler können eine Höhe von bis zu 170 mm und Netzteile eine Länge von bis zu 235 mm haben. Zudem finden bis zu zwei 3,5“-HDDs oder vier 2,5“-SSDs im Gehäuse Platz.
Neli eelinstallitud võimsat ventilaatorit • Toetab kuni 412 mm pikkuseid graafikakaarte • Rohkelt kaablite haldamise ruumi ja kinnitustarvikuid • Tööriistavaba ligipääs eemaldatavate klaaspaneelide kaudu • Rohkelt salvestusruumi 3,5" ja 2,5" draividele
Kompaktne keskmise torniga ATX-tüüpi arvuti, tiheda võrguga esipaneel; 3 x 120 mm ARGB ventilaatorit, tugi kuni 10 ventilaatorile; 360 mm vedelikjahutuse tugi ja alumised sisendpesad graafikakaardile; Graafikakaart kuni 430 mm, ...
Kompaktne ATX-tüüpi kesktorn, karastatud klaasist esi- ja külgpaneelid; 3 x 120 mm ARGB ventilaatorit eelinstallitud; 360 mm vedelikjahutuse tugi ja põhjaventilaatorid graafikakaardile; Graafikakaart kuni 430 mm, GPU tugiklamber ...
ENDORFY Fishtank 6000 Corona is a showcase PC case that provides a panoramic view of your PC. Two glass panes and the elegant, slim design showcase your components particularly effectively. The very good compatibility - also for motherboards with rear connectors and in SSI-CEB format (E-ATX) as well as support for up to two 360 mm radiators - makes it a solid basis for a high-end PC. On the Fishtank 6000 Corona, the I/O panel is located in the lower area of ??the side wall and remains easily accessible at all times when the housing is on the desk - regardless of the orientation. To There is one USB-C 3.2 Gen 2 port (up to 10 Gbps), two USB-A 3.2 Gen 1 ports (up to 5 Gbps) and a combination audio port for headphones and microphone. The Fishtank 6000 Corona offers versatile options for configuring the cooling system - for both air and water cooling. Large radiators measuring 360 mm or 240 mm can be installed at the top, while 360 ??mm or 280 mm are also possible on the side. In addition, CPU air coolers with a height of up to 182 mm are supported and up to 9 × 120 mm or 7 × 140 mm fans can be installed. This component compatibility gives you flexibility when putting together a powerful system. The large internal volume, comparable to the Arx 700 series, offers space for powerful components - including graphics cards with a length of up to 445 mm and up to 7 expansion cards. There is space inside for a maximum of 3 data carriers (1× 2.5", 1× 3.5" and 1× 2.5"/3.5"). Mounting radiators and fans is made easier with an additional side bracket that allows components to be secured before installation into the case. Easily removable panels as well as magnetic filters on the top and side walls and a bottom filter that can be pulled out from both sides make this easier Cleaning. Fishtank 6000 Corona is equipped with four pre-installed ENDORFY Corona 120 fans - three reverse on the side and one standard fan on the back. The double-sided ARGB ring provides impressive lighting from every angle, while the speed range of 200-1600 rpm, the precise PWM control and the FDB bearing ensure smooth running (especially in semi-passive operation), durability and good airflow. The fans are already connected to a PWM splitter with an ARGB controller (5 connections each), which allows both control via the mainboard and autonomous operation with predefined lighting effects. Tower case type Color black EAN 5903018669434 Manufacturer no. EY2A025 Fishtank 6000 series Midi tower design Mainboard form factor E-ATX, SSI-CEB Material steel, tempered glass Window Kit Yes Internal dimensions plug-in card length maximum 445 mm Internal dimensions CPU cooler height maximum 182 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 250 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x 120 mm Corona fan pre-installed (200-1600 rpm) Notes Dust filter: Side, top, and bottom, Convenient cable management, Side: 3 x 120 mm Corona reverse fans pre-installed (200-1600 rpm) Lighting Yes, RGB RGB connectors addressable RGB header Water cooling possible Yes Water cooling possible. Supported radiators: side: 120/140/240/280/360 mm, top: 120/240/360 mm, back: 120/140 mm. Rear connection of the motherboard Yes Feature Slim “aquarium” style chassis, support for vertical GPU mounting Note (E-ATX up to 280 mm width) Accessories available 3× Pre-installed ENDORFY Corona 120 reverse fan, 1× Pre-installed ENDORFY Corona 120 fan, 1× Pre-installed PWM splitter with ARGB controller, 1× Mounting set, 1× Cable tie set, 1× Velcro set for cables, 2× Replacement clips for the side panel, 1× Microfiber cloth, 1× Instructions Volume 55 l Dimensions Width: 24 cm x Height: 47.3 cm x Depth/Length: 48.7 cm Weight 9.1kg
MC-CUBE MicroATX case Panoramic design in ultra-compact cube format and ARGB illumination.The MC-CUBE takes the compact case concept to another level with a cube-like design. Equipped with 1 ARGB 120mm rear fan with multiple preset lighting effects and ARGB sync cable and continuous tempered glass on the front and side, the MC-CUBE combines aesthetics and functionality in a chassis designed to maximize space. It also offers compatibility with MicroATX and Mini-ITX motherboards, support for 120mm liquid cooling, capacity for up to 5 120mm fans and USB-C, USB 3.0 and HD Audio connectivity. Panoramic tempered glass Ultra-compact cube format 120mm ARGB rear fan included Advanced connectivity with USB-C Cube format with panoramic designInnovative cube-like design, with compact dimensions that give it a personality of its own in any configuration. The continuous tempered glass on the front and side creates a spectacular panoramic effect that enhances the interior of the equipment and elevates your setup.ARGB LIGHTINGThe MC-CUBE incorporates 1 ARGB 120mm rear fan with multiple predefined lighting effects and cable for synchronization with motherboards and ARGB controllers, allowing to integrate the chassis lighting with the rest of the system components.Efficient coolingThe MC-CUBE offers a solid base to keep the temperature under control. With a rear fan included, it allows up to 5 x 120mm fans to be installed and supports liquid cooling up to 120mm, as well as supporting CPU heatsinks up to 163mm.Optimized compact designIts compact design allows Micro-ATX and Mini-ITX configurations to be assembled making the most of the space available, without sacrificing a functional, tidy interior layout, ready for convenient assembly.Hardware compatibilityDesigned for compact and functional configurations, the MC-CUBE offers optimized compatibility to build a high performance computer Graphics cards up to 260mm CPU coolers up to 163mm Up to 5x 120mm fans Liquid cooling up to 120mm Compatible with Micro-ATX and Mini-ITX boards Space for 2 x 2.5" SSD and 1 x 3.5" HDD Double chamber and easy maintenanceThe dual-chamber structure separates the power supply and cabling from the main components, promoting cleaner assembly and better interior organization. In addition, it incorporates a top magnetic dust filter that helps protect the interior and facilitates the daily maintenance of the equipment.Connectivity and quick accessIntegrates USB-C, USB 3.0 and HD Audio on the top panel for convenient connection of peripherals, headphones and other commonly used devices.
