Optimized Airflow Design RGB Fusion with ARGB Connector Hub Support Motherboards up to E-ATX Up to 360mm Liquid Cooling Compatible Support Vertical GPU Installation Full-Size Tempered Glass Side Panel With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel Pre-installed 4 ARGB fans C301 GLASS CPU Height : 170mm GPU Length : 400mm PSU Length : 180mm, MidiTower PSU Not included, Front : 120mm x3 (ARGB); Rear : 120mm x1 (ARGB) Dimensions H=486 W=220 D=473 mm
Portos ARGB Mini Black Logic Portos ARGB Mini is a chassis created to build a powerful and modern gaming PC. WHEN IT'S THE INSIDE THAT COUNTS... Are you building a computer for gaming? And you want it to not take up too much space on your desk? Then of course you need a well-thought-out, well-designed and good-looking MINI ATX-sized case. Preferably still one with three mounted ARGB fans, an airy front and top, dust filters, and the side panel was made into a tempered glass door. This is where Case Logic Concept Portos ARGB MINI comes to the rescue. A concrete competitor for gaming tasks, providing good airflow, component culture, their safety and low temperatures of installed components. OPEN YOURSELF TO NEW A side panel made of tempered glass in the form of a hinged door makes it easier not only to install components, but also to keep the computer clean. Just open the door and clean the center with compressed air. Isn't it simple and practical? It's the only one we want to give you, because they simply belong to you. TO HOT COMPONENTS SAY "NO" An airy front and top panel significantly facilitates air circulation. Two 120 mm fans on the front and one 120 mm fan on the back Cases effectively cool the heated components. All for your comfort and the safety of your computer. Always willing to play Logic PORTOS ARGB MINI is a case created to build an efficient and modern gaming PC. Optimal airflow, practical solutions and pre-installed ARGB fans make up its gaming character. READY FOR GAMING COMPONENTS The ability to mount graphics cards up to 340 mm and a maximum CPU cooling height of 155 mm allows the installation of most high-performance components available on the market. PROTECT YOUR COMPUTER FROM DUST DUST FILTERS A dust filter has been placed under the power supply unit. It minimizes the amount of dust sucked in by the PSU's fan, positively affecting its operating temperature and service life. An additional filter is located on top of Cases. This effectively traps unwanted dust and protects the installed components. It protects against dust that enters the computer by gravity throughout the day, even when the computer is turned off. All the effective protection is complemented by mesh mesh on the front panel. OPTIMAL AIR CIRCULATION The ventilated front panel provides airflow with two, efficiently operating 120 mm fans. The back of Cases , on the other hand, features one pre-installed 120 mm fan This allows you to effectively cool the installed components of the computer's interior, positively influencing the culture of their operation and service life. As an option, it is possible to mount two 140 millimeter fans on the front of Cases in place of the factory-installed ones and two 120 or 140 millimeter fans on the top on their own. Case It is also adapted for installation of water cooling. ARGB BEAUTY Case for gamers must look nice. That's why the pre-installed ARGB fans add beauty to the case and the gaming stand. The color of the backlight can be changed at will from the predefined settings using the button on the control panel Cases. Convenient access to the top panel Convenient access to the top panel, and there are two USB 2.0 and one USB 3.0 connectors, plus one minijack connector for headphones and microphone, a power button and a button to control the fan backlight. SIMPLE INSTALLATION Everything here is well thought out and intuitive. Building a computer in this case is a pleasure and is child's play. POWER SUPPLY A gaming computer must have a good and powerful power supply. That's why we made sure that it has a home here! The maximum length of the power supply with the disk cage installed is 200 mm. A dust filter has been placed under the power supply, which effectively protects the operation of the power supply from dust 4 PCIe expansion card slots Four slots for PCIe expansion cards. This is the optimal number for mounting, among other things, a graphics card and a network card. SPACE FOR GAMES IN ABUNDANCE The mounting of HDD or SSD drives is obviously thought out here as well. Inside Cases at tunnel level there is a basket for 3.5" or 2.5" drives. On the motherboard tray, on the other hand, it is possible to mount an additional 2.5" drive. A total of 2 SSDs and 1 HDD or 1 SSD and 2 HDDs can be installed.
Passiv gekühltes Mini-ITX-Gehäuse, für Supermicro A1SAi/A1SRi-Mainboards, lüfterlos und leise, Platz für vier 2,5-Zoll-Laufwerke, edle Außenhülle aus Aluminium mit Kühlfinnen, 2x USB 3.0
XPG INVADER X. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Placering af strømforsyning: Bund. Understøttede diametre for sideventilatorer: 120 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 245 mm, Dybde: 475 mm, Højde: 448 mm
PC case Mars MC-XO ATX FRGB fan black The MC-XO is an ATX semi-designed for those who seek the perfect balance between performance and aesthetics. With an optimized design for refrigeration, it incorporates a 120mm rear FRGB fan, a double-chamber system for efficient thermal management and the innovative Sidecool system, which maximizes the side air flow without compromising clean aesthetics and sophisticated from the box. Its modern and functional design makes it an ideal choice for game and professional setups.
ATX-korpus • Esi- ja külgpaneel karastatud klaasist • Kahekordne kambristruktuur • Lihtne kaablite haldamine • Mahutab kuni 445 mm pikkuseid graafikakaarte
Das Inter-Tech ODS-716 für Raspberry Pi 4B ist komplett aus Aluminium gefertigt und bietet, zusammen mit den beiden integrierten Wärmeleitern für CPU und RAM ideale Wärmeleitfähigkeiten. Der Boden und Deckel des Gehäuses werden miteinander verschraubt, was zur Stabilität des gesamten Aufbaus beiträgt.
Das FLP02 kombiniert Retro-inspiriertes Design mit klassisch-beigem Finish, modernen Kühlmöglichkeiten und flexiblen Einbauoptionen. Die klassisch gestaltete Front ist mit der von 5,25"-Floppy-Laufwerken inspirierten Abdeckung für Laufwerke, den ikonischen Reset- und Turbo-Tasten und dem als typischer Kippschalter gestalteten Power-Button genau das Richtige für Retro-Fans. Der Turbo-Knopf sorgt dabei für die sofortige Beschleunigung der Lüfter auf volle Drehzahl, was auch über das LED-Feld angezeigt wird. Drei Lüfter sind im Auslieferungszustand bereits enthalten - weitere Kühlmöglichkeiten lassen sich als Lüfter oder als Radiatoren flexibel hinzufügen. Dabei nimmt das FLP02 CPU-Kühler bis zu einer Höhe von 182 Millimetern auf und unterstützt den Einbau von Steckkarten bis zu einer Länge von 386 Millimetern (nach Entfernung des Laufwerkskäfigs in der Front). Außerdem mit dabei: Eine Halterung für lange GPUs und Unterstützung für Mainboards mit Formfaktor SSI-CEB. Das Schlüsselschloss an der Vorderseite trägt zum Retro-Look bei und verhindert unbeabsichtigtes Ein- und Ausschalten oder Zurücksetzen. Die 5,25"-Einschübe an der Front sind kompatibel mit Hot-Swap-Adapterkäfigen, so dass das FLP02 auch für Server-Builds gut geeignet ist.
DarkFlash DS900G computer case (white)The DarkFlash DS900G is a mid-tower case that offers extensive functionality for demanding users. It supports ATX, Micro-ATX, and ITX motherboards, and its interior allows for the installation of graphics cards up to 425 mm in length and CPU coolers up to 170 mm in height. The interior space has been designed for easy access to components and convenient expansion. The DS900G also offers full support for various cooling systems, making it easy to handle demanding gaming or work setups.Full interior exposureThe curved side panel made of transparent tempered glass allows a full view of the components installed inside. The slightly rounded surface of the glass creates a panoramic effect that sets the case apart from standard models and allows the lighting and aesthetics of the assembly to be fully exposed.Effective coolingThe case has been designed for optimal air circulation. It allows for the installation of up to 10 120 mm fans or a combination of 2 140 mm fans on the top panel. The design provides for 3 fans at the top, 3 on the side, 1 at the rear, and 3 at the bottom, allowing for a highly efficient cooling system. Additionally, water cooling up to 360 mm in length can be installed on the top panel, and up to 240 mm in length on the side.Optimized airflow and noise reductionThe DS900G case has densely spaced ventilation holes that not only improve airflow but also effectively trap larger dust particles. The rear panel is equipped with a steel mesh that improves cooling efficiency by up to 15% while reducing noise levels by approximately 10%.Magnetic dust filtersMagnetically attached dust filters are located at the top and bottom of the case. This makes them easy to remove and clean without having to disassemble other components. This type of solution facilitates daily computer maintenance and helps to maintain optimal operating conditions for the components.Various expansion optionsThe interior of the case has been designed for users who want to maintain aesthetics and order while having space for all the necessary components. The DS900G offers 7 PCIe slots, giving you the freedom to install long graphics cards and additional expansion cards. The mounting space has been designed to ensure adequate airflow, space for cable management, and quick access to the most important components.Flexible drive mounting optionsThe DarkFlash DS900G allows you to install 2 3.5" HDDs and 2 2.5" SSDs. Depending on your needs, various configurations are possible, such as two HDDs and one SSD, or one HDD and two SSDs. This allows each user to tailor the storage layout to their preferences and the specifics of their setup.Convenient access to ports and buttonsThe case offers a practical set of ports and buttons on the front panel. The user has at their disposal one USB 3.0 connector and two USB 2.0 ports, as well as an HD Audio connector. The front panel also features Power and Reset buttons and a button to control the backlight. ManufacturerDarkFlashModelDS900GCase typeMiddle TowerSide panelTempered glassMotherboard standardATX, Micro-ATX, ITXPower supply standardATXInternal drive bays2 × 3.5" (HDD)2 × 2.5" (SSD)Expansion card slots7 PCIe slotsMaximum graphics card length425 mmMaximum CPU cooler height170 mmMaximum number of fansUp to 10 120 mm fansAdditionally: 2 140 mm fans (top)Fan mounting optionsTop: 3 × 120 mm or 2 × 140 mmSide: 3 × 120 mmRear: 1 × 120 mmBottom: 3 × 120 mmWater cooling mounting optionsTop: up to 360 mm or 240 mmSide: up to 240 mmNumber of fans installedNo fans installedButtons and controlsPower, ResetConnectors1 × USB 3.02 × USB 2.01 × HD AudioMaterialSPCC 0.5 mmColorWhiteHeight454 mmWidth218 mmDepth434 mm
Das APNX V2 ist ein Premium-PC-Gehäuse, das für hervorragende Kühlung, elegante Ästhetik und Anpassungsfähigkeit entwickelt wurde. Seine drei abnehmbaren Hartglasplatten bieten einen rahmenlosen Panoramablick, während das X-Pand Flow Design die Gesamtluftströmungsdynamik erheblich verbessert. Mit Unterstützung für bis zu 10 Lüfter, 360-mm-Kühler und zwei 16-cm-Lüfter an der Unterseite sorgt es für eine erstklassige Wärmeleistung. V2 unterstützt gängige Mainboards mit Reverse-Anschluss für eine übersichtlichere Kabelverwaltung. Funktionen wie eine GPU-Halterung, eine abnehmbare Motherboard-Kabelabdeckung und ein austauschbares PSU/HDD-Fach verbessern die Haltbarkeit und Anpassungsmöglichkeiten. Mit vertikaler oder horizontaler 360-mm-AIO-Montage und Unterstützung für den APNX 10-Port-Lüfter-Hub bietet das APNX V2 effiziente Kühlung und mühelose Anpassungsmöglichkeiten für Hochleistungs-Builds.
The AeroCool P500D combines aesthetics and performance at the highest level. Thanks to the front and side panels made of tempered glass, this midi-tower case perfectly showcases your components, making it ideal for systems that are meant to be the center of attention. With support for high-end graphics cards up to 418 mm in length and CPU air coolers up to 165 mm in height, it provides the necessary space and compatibility for high-end gaming and professional content creation. Supporting up to nine 120 mm fans, the P500D delivers comprehensive cooling performance even for the most demanding systems. Low temperatures and high performance are ensured even during intensive use or gaming sessions. The case includes easily removable dust filters for quick cleaning and improved airflow—so your system runs optimally and dust build-up is prevented.
The 3U rackmount server case SST-RM31 is designed for demanding computing environments, combining high compatibility, flexible power supply options, and exceptionally strong cooling performance. It supports motherboards up to the SSI-EEB form factor, making it suitable for both standard ATX and E-ATX platforms as well as professional server boards. For power supply, the case offers a choice between two SFX-L power supplies or redundant 2U-CRPS units, making it ideal for mission-critical systems where high availability is crucial. Inside, there is ample space for up to eight full-height PCI expansion cards, allowing for extensive GPU, network, or storage configurations without compromise. For efficient cooling, the case supports 360 mm water cooling radiators, which can be operated with up to six 120 mm fans in a push-pull configuration. Alternatively, CPU air coolers up to 110 mm in height can be installed, allowing for classic cooling solutions without limitations. The case is rounded out by modern connectivity, including an integrated USB Type-C port on the front, providing quick access to current devices and storage media. Overall, this server case offers an ideal foundation for high-performance workstations, virtualization servers, storage-intensive applications, or compact compute clusters that require both expandability and maximum cooling performance.
Das Pureline 270 ist mit Hartglasplatten an der Vorder- und Seite des Gehäuses ausgestattet, um optimale Betrachtungswinkel für Ihr System im Inneren zu bieten. Das Gehäuse unterstützt Radiatoren von bis zu 360 mm auf der Oberseite des Gehäuses und kann den Kühldedarf einiger der anspruchsvolleren Systeme decken, während es gleichzeitig ein ansprechendes Erscheinungsbild beibehält, um Ihre Komponenten zur Geltung zu bringen. Das Pureline 270 wird mit drei 120-mm-Lüftern geliefert, von denen zwei seitlich angebracht sind, und ein weiterer an der Rückseite des Gehäuses, um eine Luftabfuhr zu bieten. Das Gehäuse kann bis zu zwei 2,5Zoll-SSDs oder zwei 3,5-Zoll-HDDs unterstützen, an jeweils einem dedizierten Speicherort und jeweils einem gemeinsam genutzten Speicherort. Zwei USB 3.0-Anschlüsse, ein USB 3.2 Gen 2 Typ C und HD-Audio Anschlüsse sind auf der Oberseite angebracht, um bei Bedarf direkten Zugriff zu ermöglichen.
With the Jonsbo TK-5, your gaming setup becomes a real eye-catcher. Thanks to the open design, you have a full view of your installed hardware. White mid tower with panoramic glass design Numerous fan and radiator mounts for effective cooling performance Motherboards up to ATX Space for graphics cards up to 460 mm and CPU coolers with a height of up to 180 mm Jonsbo TK-5: PC case with panoramic design The Jonsbo TK-5 mid tower offers the perfect balance between size and functionality. With ample space for high-performance hardware and efficient cooling, it is the ideal choice for gaming builds. Extensive cooling options with fans and radiators To keep your hardware cool under any load, up to ten fans can be installed in the Jonsbo TK-5 at the same time. The case offers space on the top and bottom for three 120 or 140 mm fans each. On the side, you can install three 120 mm fans, and one at the rear. An AiO liquid cooling system can also be installed without any problems if you prefer to cool your high-performance hardware with water cooling. There is space for a 360 mm water cooling system on the top and bottom. Installing your hardware The case offers enough space for powerful gaming hardware. It supports the installation of long graphics cards up to 460 mm. The CPU cooler should not exceed a height of 180 mm. A total of eight drives can be installed to store programs and games.
The Jonsbo X400 combines a striking design with maximum cooling performance – ideal for high-end setups with modern back-connect motherboards. The mix of steel, tempered glass, and technical ABS ensures a robust case with showroom character. Supports ATX, M-ATX, and ITX – also with a back-connect layout Up to 13 fans: 3 top, 3 side, 2 rear, 2 backside, 3 bottom Dual radiator support up to 360 mm – e.g. for AiO & custom loop GPU up to 427 mm, CPU cooler up to 176 mm – maximum hardware freedom USB-C (Gen 2) + 2x USB-A and audio/mic on the front panel Maximum space for high-end hardware The X400 offers uncompromising space for large GPUs, tall air coolers, and power supplies up to 180 mm. Perfectly suited for builds with powerful hardware and modern cable management via back-connect motherboards. Massive cooling capacity With up to 13 fans, the case offers an enormous airflow foundation. In addition, two radiators up to 360 mm can be installed – ideal for push/pull configurations or dual AiO setups. Elegant design meets technology Reinforced ABS frame, tempered glass, and a functional I/O panel make the X400 an eye-catcher with thoughtfully designed features. Thanks to USB-C, you are also well equipped for modern peripherals.
Brutokaal: 3.85 kg Netokaal: 3.85 kg Saadetise kogus pakendis: 1 värv: must Audio-Out: 1 USB 2.0: 2 mikrofon: 1 Ümbrise tüüp: MidiTorn (MidiTower) PSU: Not included 3.5" Internal: 3 Cooling & Ventilation System: optional: 1x 92mm on the rear, 1x 120mm on the front, 2x 120mm on the left side panel 5.25" External: 3 2.5" Internal: 1 MicroATX: Jah Pakendi maht: 0.04061 cubm USB 3.0: 2 Saadetise pakendi laius: 21.8 cm Saadetise pakendi sügavus: 40.5 cm Saadetise pakendi kõrgus: 46 cm Saadetise pakendi kaal: 3.85 kg Mudeli nimetus: HO-12B
