ASUS 90DC00M0-B39040. Type: PC, Produktfarve: Sort, Understøttet motherboard, formfaktorer: ATX. Frontventiler installeret: 2x 160 mm, Understøttede diametre for frontventilatorer: 140,160 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 412 mm, Højde: 503 mm
The Phanteks XT M3 impresses with a space-saving design that offers you more than enough room for high-end components. With effective cooling and tidy cable management, this case is suitable for everyone—whether you are a casual gamer or an enthusiast. Compact Size: Space-saving case for high-end hardware Effective Cooling: Space for up to nine fans Large Radiator: Supports installation of a 360 mm radiator on the top panel Organized Build: Space for neat cable management Back-Connect Support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SFF case designed for greatness. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 case with fans Effectively cooled with fans and radiator The Phanteks case supports the installation of up to nine fans, keeping your build cool under any workload. You can mount three fans on the bottom, directly below the graphics card, to provide extra cooling for your GPU. A 360-mm radiator can also be mounted on the top if you prefer water cooling. In addition to fans and a radiator, the mesh front panel ensures excellent airflow, reducing heat buildup inside your case. Your new gaming PC with clean cable management Laying out cables neatly is not always easy—but with the Phanteks XT M3, cable management becomes effortless. Cutouts in just the right places allow for tidy cable routing. Combined with support for motherboards with a back-connect design, you get an organized build that not only looks great but also improves airflow. Mini-ITX case built for powerful hardware Even a large graphics card fits in easily—the case provides space for a GPU up to 430 mm long. Note that you cannot install fans at the front if you utilize the full length. The CPU cooler should not exceed 175 mm in height, and the power supply should be no longer than 150 mm.
The Phanteks XT M3 impresses with its space-saving design, offering you more than enough room for high-end components. Thanks to efficient cooling and neat cable management, this case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact size: Space-saving case for high-end hardware Effective cooling: Supports up to nine fans Large radiator: Accommodates a 360 mm radiator at the top Clean build: Space for neat cable management Back-connect support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Showcase your gaming hardware with the Phanteks XT M3—a compact SFF case made for big ambitions. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case with fans Efficient cooling with fans and radiator The Phanteks case supports the installation of up to nine fans, ensuring a cool build under any load. Three fans can be mounted at the bottom, directly beneath the graphics card, providing extra cooling specifically for your GPU. Additionally, a 360 mm radiator can be installed at the top if you prefer water cooling. Beyond fans and the radiator, the mesh front panel also provides excellent airflow, preventing hot air from accumulating inside your case. Your new gaming PC with clean cable management Laying out cables neatly can be tricky—but with the Phanteks XT M3, cable management is effortless. Cutouts in the right places allow you to route cables cleanly. Combined with support for motherboards with back-connect design, you'll get a tidy build that not only looks great, but also improves airflow. Mini-ITX case built for high-performance hardware Even a large graphics card is no problem—the case offers space for a GPU up to 430 mm in length. Note that you cannot install front fans if you use the full GPU length. The CPU cooler should not exceed a height of 175 mm, and the power supply should be no longer than 150 mm.
The HYTE X50 is a stylish midi-tower case designed for discerning PC enthusiasts who want to combine design and function. With its innovative internal structure and high-quality craftsmanship, it targets gamers, streamers, and builders with an eye for detail. Three-chamber layout separates heat sources for optimal airflow Supports up to ten 120 mm RGB fans for outstanding cooling performance 360 mm radiator support on both top and bottom for powerful water cooling Mesh front and side panels ensure optimal fresh air intake Magnetic cable management system for effortless, clean builds HYTE X50: Innovative cooling concept with clear separation The HYTE X50 uses an intelligent three-chamber design that physically separates the GPU, motherboard, and power supply. This creates unobstructed airflow that efficiently expels heat from the case. The direct stream of fresh air onto your graphics card keeps it cool even during graphics-intensive gaming or 3D rendering, consistently supplying it with air. Design meets functionality The case impresses with a curved side mesh panel that reliably supplies your system with air. Its clean, symmetrical design is not only eye-catching but also thoughtfully constructed. Radiators up to 360 mm can be installed at the top and bottom, so even high-end water cooling systems fit with ease. Modular interior and easy installation Building your system is made extremely simple thanks to thoughtful details like magnetically closing cable guides, tool-free front and side panels, and flexible mounts. Additionally, the USB-C port on the front provides lightning-fast access with up to 20 Gbit/s—perfect for modern peripherals and rapid data transfers.
The HYTE X50 is a stylish midi-tower case designed for demanding PC enthusiasts who want to combine design and function. Its innovative internal structure and high-quality build make it perfect for gamers, streamers, and builders who pay attention to detail. Three-chamber layout separates heat sources for optimal airflow. Supports up to ten 120 mm RGB fans for exceptional cooling performance. 360 mm radiator support on both the top and bottom for powerful water cooling. Front and side panels made of mesh for optimal fresh air intake. Magnetic cable management system for effortless, clean builds. HYTE X50: Innovative cooling with clear separation. The HYTE X50 utilizes an intelligent three-chamber design that spatially separates the GPU, motherboard, and power supply. This creates unobstructed airflow, efficiently exhausting heat from the case. With a direct stream of fresh air to your graphics card, you keep it cool even during graphically intensive games or 3D rendering, ensuring a constant supply of air. Design meets functionality. The case impresses with a curved mesh panel on the side, reliably supplying your system with air. Its clean, symmetrical design is both visually striking and thoughtfully constructed. Radiators up to 360 mm can be installed at the top and bottom, providing space for high-end water cooling setups. Modular interior and easy installation. Building your system is made extremely easy by thoughtful details such as magnetically sealed cable guides, tool-free front and side panels, and flexible mounts. Additionally, the USB-C port on the front offers lightning-fast access with up to 20 Gbit/s — ideal for modern peripherals and fast data transfers.
Antec P30 AIR. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Placering af strømforsyning: Bund. Frontventiler installeret: 2x 140 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 222 mm, Dybde: 478 mm, Højde: 465 mm
FreeForm 2.0 avatud raam mitmekülgseteks paigaldusteks; Toetab kuni 390 mm pikkusi graafikakaarte; Sisaldab GPU tugiklambrit raskete kaartide jaoks; Emaplaadi taga olev kaabeldus puhta paigalduse tagamiseks; 8 PCI laienduspesa ...
Das ProArt PA401 Wood Edition Beige besticht durch eine Frontblende aus Holz, die für einen unverwechselbaren, eleganten Stil sorgt und gleichzeitig Nachhaltigkeit fördert. Die charakteristische Frontblende aus Eschenholz des ProArt PA401 wurde weiter verfeinert und erhält durch ein neues beigefarbenes Finish eine moderne Optik. Ein aktualisiertes weißes Kabelset sorgt zudem für ein harmonisches Gesamtbild. Das Gehäuse verfügt außerdem über eine optimale integrierte Kühlung mit zwei 160-mm-Lüftern an der Vorderseite und einem 120-mm-Lüfter an der Rückseite sowie einem integrierten Lüfter-Hub, der einen optimalen Luftstrom ermöglicht. Die ProArt PA401 hat ein Frontgitter mit 33% Porosität, um den Luftstrom und die Belüftung zu maximieren. Die eingebauten 160-mm-Lüfter an der Vorderseite sorgen für einen effizienten Luftstrom von bis zu 138 cfm zu Grafikkarten und CPU-Kühlern und der äußere Ring, der die Lüfterblätter miteinander verbindet, reduziert die anfänglichen Vibrationen. Die Frontlüfter und der 120-mm-Hecklüfter mit PWM-Steuerung sorgen für einen optimalen Luftstrom, geringe Geräuschentwicklung, geringe Vibrationen und hohe Zuverlässigkeit. Die Anschlussoptionen sind über das vordere I/O-Panel leicht zugänglich, darunter eine PWM-Steuerung mit zwei Sektionen, ein USB Type-C-Anschluss mit 20 Gbit/s, zwei USB-A 3.0-Anschlüsse, HD-Audio und eine Sperre für die Power- und Reset-Taste.
Das Elite 690 verfügt über zwei gehärtete Glasscheiben, die Ihr System in Szene setzen, während eine holzstrukturierte Front und ein Mesh-Einlass Wärme mit effizientem Luftstrom verbinden. Dank der oberen und unteren Belüftung für vertikale Kühlung unterstützt es vielseitige Lüfter- und Kühlerkonfigurationen – perfekt für leistungsorientierte oder stilvolle Systeme. Die vertikale Anordnung trennt die Wärmezonen für eine bessere Luftzirkulation und eine sauberere Kabelführung. Bis zu 10 Lüfter in einer von unten nach oben verlaufenden Anordnung maximieren den Luftstrom und die Kühlung. Die aus echtem Holz gefertigte Frontplatte verleiht jedem Raum eine warme, organische Note. Das Gehäuse enthält 3 in Reihe schaltbare ARGB-Lüfter mit vollständiger Unterstützung für die Beleuchtungssynchronisierung des Motherboards. Das Elite 690 verfügt über einen USB 3.2 Gen 2x2 Typ-C und zwei USB 3.0-Anschlüsse für blitzschnelle Konnektivität.
Das Elite 600 ist ein ATX-Mid-Tower-Gehäuse für Systembauer, die Wert auf Leistung und Stil legen. Mit einem Seitenteil aus gehärtetem Glas und einem schlanken, modernen Design bietet es beeindruckendes Kühlpotenzial und unterstützt bis zu 360-mm-Radiatoren für eine effiziente Luftzirkulation. Das Gehäuse verfügt über einen USB 3.2 Gen 2x2 Typ-C Anschluss für schnelle Konnektivität und bietet reichlich Speicheroptionen, darunter Platz für eine 3,5-Zoll-Festplatte, ein 2,5-Zoll/3,5-Zoll-Laufwerk und zwei 2,5-Zoll-SSDs. Es ist für GPUs in voller Größe bis zu 425 mm ausgelegt und bietet Platz für anspruchsvolle Hardware und gleichzeitig eine klare, funktionale Ästhetik für jeden Systemaufbau.
Das Elite 600 ist ein ATX-Mid-Tower-Gehäuse für Systembauer, die Wert auf Leistung und Stil legen. Mit einem Seitenteil aus gehärtetem Glas und einem schlanken, modernen Design bietet es beeindruckendes Kühlpotenzial und unterstützt bis zu 360-mm-Radiatoren für eine effiziente Luftzirkulation. Das Gehäuse verfügt über einen USB 3.2 Gen 2x2 Typ-C Anschluss für schnelle Konnektivität und bietet reichlich Speicheroptionen, darunter Platz für eine 3,5-Zoll-Festplatte, ein 2,5-Zoll/3,5-Zoll-Laufwerk und zwei 2,5-Zoll-SSDs. Es ist für GPUs in voller Größe bis zu 425 mm ausgelegt und bietet Platz für anspruchsvolle Hardware und gleichzeitig eine klare, funktionale Ästhetik für jeden Systemaufbau.
The IT-5905 is a modern Midi-Tower with a robust and compact design. It knows to convince due to its user-friendly assembly of front connectors in the upper part of the front panel.Besides the design, the IT-5905 convinces with space for up to four optional coolers, several mounting options for 3.5" and 2.5" HDD´s and space for graphics cards with a length of 32cm.Two USB 3.0 front connectors and a depot in the cap (for USB-sticks for example) complete the offer and make this case a real all-rounder.KujutegurMiditornTüüpPC5,25" lahtrite arv33,5" lahtrite arv4Emaplaadi toetatud kujuteguridATX,Micro-ATXToote värvMustAknagaJah2,5" salvede arv2Sisemiste 3,5" salvede arv3Väliste 5,25" kettalahtrite arv3SobilikKodu/kontorGraafikakaardi maksimaalne pikkus32 cmKaasas toiteplokkEiUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahMaksimaalne esiventilaatorite arv1Toetatud esiventilaatorite läbimõõt120 mmMaksimaalne küljeventilaatorite arv2Toetatud küljeventilaatorite läbimõõt120 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt80,120 mmToetatud kõvakettasuurused2.5,3.5"JuhtmehaldusJahLähtestusnuppJahLaius200 mmSügavus415 mmKõrgus410 mm
SGCC Steel / Mesh / ABS Plastic / Tempered Glass ATX Full Tower; 4 x USB 3.2 gen 1 (3.0) / 1 x USB 3.2 gen 2 Type-C / Audio Front Ports; 12 x 3.5" / 2.5" Combo Internal 3.5" Drive Bays
The Chieftec Apex Q tower chassis strikes a balance between cooling efficiency, performance, and quiet operation. Designed for both enthusiasts and professionals, this case is compatible with a broad spectrum of motherboards from ATX to Mini-ITX, ensuring versatility for various system configurations. Its front panel offers essential connectivity options, including USB 3.0 and USB-C 3.2 Gen 2 ports, along with audio in/out jacks, to accommodate all your peripheral needs. The Apex Q is engineered for effective cooling, with ample support for multiple fans and radiators to maintain optimal system temperatures. Additionally, its sound dampening panels help minimize noise, providing a more focused environment for gaming and professional tasks. Capable of housing high-end components with ease, the Apex Q demonstrates Chieftec's commitment to quality and thoughtful design.
